drm_*() macros can show the device a message came from.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
legacy-pm, kv-dpm and si-dpm have prints while changing power states
that don't have a level and thus are printed by default. These are
not useful at runtime for most people, so decrease them to debug.
Reported-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4322
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On DCN314, using full screen application with enabled scaling like 150%,
175%, with overlay cursor, causes a second cursor to appear when changing
planes. Dpp cache is used to track the HW cursor enable. Since power gate
is disabled for hubp & dpp in DCN314, dpp_reset() zero'ed the dpp struct,
while the dpp hardware was not power gated.
So, when plane is changed in a full screen app, and the overlay cursor is
enabled, the cache is cleared, so the cache does not represent the actual
cursor state.
[HOW]
Added conditionals for dpp & hubp reset and their pg_control functions
only if according power_gate flags are enabled.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When performing certain link maintenance compliance tests or forcing link
settings, changing between 128b/132b and 8b/10b rates no longer works on
some ASICs. Some rate divider updates only occur when we set
timings or validate state, which is not performed currently when toggling
DPMS to change rates.
[HOW]
Re-calculate dividers and reprogram audio when switching between DIO
and HPO through DP compliance/escape code path.
Add OTG disable/re-enable so we don't touch the clock while OTG is active.
Acquire dcLock before forcing link settings to avoid thread synchronization
errors due to added programming in escape code path and potential HPD
interrupts.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OLED panels can be fully off, but this behavior is unexpected.
[How]
Ensure that minimum luminance is at least 1.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Rounding error sometimes occurs when the refresh rate is equal to a panel's
max refresh rate, causing HDMI compliance failures.
[HOW]
Added a case so that we round up to avoid v_total_min to be below a panel's
minimum bound.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Harold Sun <Harold.Sun@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Separate the checks for set_gsl and set_gsl_source_select, since
source_select may not be implemented/necessary.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Consolidated the initialization of DML21 parameters into a single
function `dml21_populate_dml_init_params` to streamline the process
and improve code readability.
- Updated the function signatures in the header files to reflect changes
in parameter passing for DML context.
- Removed redundant debug option handling and integrated it into the new
configuration population function.
- Adjusted the DML21 initialization logic in the wrapper to accommodate
the new structure, ensuring compatibility with different DCN versions.
- Enhanced the handling of clock parameters and bounding box configurations
from various sources, including hardware defaults and software policies.
- Improved the clarity of the code by renaming functions and variables for
better understanding of their purposes.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Expose some function for new platform use
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The tunnel BW validation code has changed to the new one.
Remove the unused code.
The DP tunneling overhead is not updated in SST.
Move updating DP tunneling overhead for both SST and MST.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Prevents null pointer dereferences to enhance function robustness
[HOW]
Adds early null check and return false if invalid.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the scheduler wqueue stopping and starting into
the ring reset callbacks. On some IPs we have to reset
an engine which may have multiple queues. Move the wqueue
handling into the backend so we can handle them as needed
based on the type of reset available.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move guilty logic into the ring reset callbacks. This
allows each ring reset callback to better handle fence
errors and force completions in line with the reset
behavior for each IP. It also allows us to remove
the ring guilty callback since that logic now lives
in the reset callback.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the force completion handling into each ring
reset function so that each engine can determine
whether or not it needs to force completion on the
jobs in the ring.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
panthor_gpu_block_power_on() takes a register offset (rdy_reg) for the
purpose of waiting for the power transition to complete. However, a
copy/paste error converting to use the new 64 register functions
switched it to using the pwrtrans_reg register instead. Fix the function
to use the correct register.
Fixes: 4d230aa209 ("drm/panthor: Add 64-bit and poll register accessors")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20250630140704.432409-1-steven.price@arm.com
Stopping the scheduler for queue reset is generally a good idea because
it prevents any worker from touching the ring buffer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Going forward, we'll need more than just the vmid. Add the
guilty amdgpu_fence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
What we actually care about is the amdgpu_fence object
so pass that in explicitly to avoid possible mistakes
in the future.
The job_run_counter handling can be safely removed at this
point as we no longer support job resubmission.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were missed when support was added for other generations.
The callbacks are called unconditionally so we need to make
sure all generations have them.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4304
Link: https://github.com/ROCm/ROCm/issues/4965
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Cc: Jonathan Kim <jonathan.kim@amd.com>
Reported-by: Johl Brown <johlbrown@gmail.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
patch dd64956685 ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685 ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "return true;" line wasn't indented. Also checkpatch likes when
we align the && conditions.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach an implementation
detail of PRIME.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
v2:
- keep amdgpu_bo_print_info() as-is (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert from generic DRM_* to dev_* calls to have device context info.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.12 SOCs, fetch the max values of xgmi speed/width from
firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the process is exiting, the mmput inside mmu notifier callback from
compactd or fork or numa balancing could release the last reference
of mm struct to call exit_mmap and free_pgtable, this triggers deadlock
with below backtrace.
The deadlock will leak kfd process as mmu notifier release is not called
and cause VRAM leaking.
The fix is to take mm reference mmget_non_zero when adding prange to the
deferred list to pair with mmput in deferred list work.
If prange split and add into pchild list, the pchild work_item.mm is not
used, so remove the mm parameter from svm_range_unmap_split and
svm_range_add_child.
The backtrace of hung task:
INFO: task python:348105 blocked for more than 64512 seconds.
Call Trace:
__schedule+0x1c3/0x550
schedule+0x46/0xb0
rwsem_down_write_slowpath+0x24b/0x4c0
unlink_anon_vmas+0xb1/0x1c0
free_pgtables+0xa9/0x130
exit_mmap+0xbc/0x1a0
mmput+0x5a/0x140
svm_range_cpu_invalidate_pagetables+0x2b/0x40 [amdgpu]
mn_itree_invalidate+0x72/0xc0
__mmu_notifier_invalidate_range_start+0x48/0x60
try_to_unmap_one+0x10fa/0x1400
rmap_walk_anon+0x196/0x460
try_to_unmap+0xbb/0x210
migrate_page_unmap+0x54d/0x7e0
migrate_pages_batch+0x1c3/0xae0
migrate_pages_sync+0x98/0x240
migrate_pages+0x25c/0x520
compact_zone+0x29d/0x590
compact_zone_order+0xb6/0xf0
try_to_compact_pages+0xbe/0x220
__alloc_pages_direct_compact+0x96/0x1a0
__alloc_pages_slowpath+0x410/0x930
__alloc_pages_nodemask+0x3a9/0x3e0
do_huge_pmd_anonymous_page+0xd7/0x3e0
__handle_mm_fault+0x5e3/0x5f0
handle_mm_fault+0xf7/0x2e0
hmm_vma_fault.isra.0+0x4d/0xa0
walk_pmd_range.isra.0+0xa8/0x310
walk_pud_range+0x167/0x240
walk_pgd_range+0x55/0x100
__walk_page_range+0x87/0x90
walk_page_range+0xf6/0x160
hmm_range_fault+0x4f/0x90
amdgpu_hmm_range_get_pages+0x123/0x230 [amdgpu]
amdgpu_ttm_tt_get_user_pages+0xb1/0x150 [amdgpu]
init_user_pages+0xb1/0x2a0 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x543/0x7d0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0x24c/0x4e0 [amdgpu]
kfd_ioctl+0x29d/0x500 [amdgpu]
Fixes: fa582c6f36 ("drm/amdkfd: Use mmget_not_zero in MMU notifier")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This got missed during SDMA 4.4.4 support.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following compile time warning when building with W=1:
warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following compile time warning when building with W=1:
warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set memory mtype to UC host memory when ext-coherent
flag is set and memory is registered as a SVM allocation.
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 5.x only supports engine soft reset which resets
all queues on the engine. As such, we need to suspend
KFD queues around resets like we do for SDMA 4.x.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform fix similar to the one in the commit 85e444a681 ("drm/bridge:
Fix assignment of the of_node of the parent to aux bridge").
The assignment of the of_node to the aux HPD bridge needs to mark the
of_node as reused, otherwise driver core will attempt to bind resources
like pinctrl, which is going to fail as corresponding pins are already
marked as used by the parent device.
Fix that by using the device_set_of_node_from_dev() helper instead of
assigning it directly.
Fixes: e560518a6c ("drm/bridge: implement generic DP HPD bridge")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608-fix-aud-hpd-bridge-v1-1-4641a6f8e381@oss.qualcomm.com
The commit 5ea6b17027 ("drm/panel: Add prepare_prev_first flag to
drm_panel") and commit 0974687a19 ("drm/bridge: panel: Set
pre_enable_prev_first from drmm_panel_bridge_add") added handling of
panel's prepare_prev_first to devm_panel_bridge_add() and
drmm_panel_bridge_add(). However if the driver calls
drm_panel_bridge_add_typed() directly, then the flag won't be handled
and thus the drm_bridge.pre_enable_prev_first will not be set.
Move prepare_prev_first handling to the drm_panel_bridge_add_typed() so
that there is no way to miss the flag.
Fixes: 5ea6b17027 ("drm/panel: Add prepare_prev_first flag to drm_panel")
Fixes: 0974687a19 ("drm/bridge: panel: Set pre_enable_prev_first from drmm_panel_bridge_add")
Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Closes: https://lore.kernel.org/dri-devel/CAPVz0n3YZass3Bns1m0XrFxtAC0DKbEPiW6vXimQx97G243sXw@mail.gmail.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250220-panel_prev_first-v1-1-b9e787825a1a@linaro.org
Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC
flags. Those are used by various bridges(e.g. dw-mipi-dsi) in the
pipeline to correctly configure its sync signals polarity.
Tested on rk3568/rk3576/rk3588 EVB.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250618080955.691048-1-andyshrk@163.com
The DSI host has different modes in prepare() and enable() functions,
prepare() is in LP command mode and enable() is in HS video mode.
>From our experience, generally the initialization sequence needs to be
sent in the LP command mode.
Move the setup init function from enable() to prepare() to fix a display
shift on rk3568 evb.
Tested on rk3568/rk3576/rk3588 EVB.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250618091520.691590-1-andyshrk@163.com
Although the datasheet of the panel module describes that it has a
reset pin, in the actual hardware design, we often use an RC circuit
to control the reset, and rarely use GPIO to control the reset. This
is the way it is done on our numerous development boards (such as
RK3568/RK3576 EVB).
So make the reset-gpio optional.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250616070536.670519-2-andyshrk@163.com
Add support for the 2160x1080 LCD panel from DJN (98-03057-6598B-I)
bundled with a HX83112B driver IC, as found on the Fairphone 3
smartphone.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250611-fp3-display-v4-3-ef67701e7687@lucaweiss.eu
Since the drm_mock_scheduler does not have real users in userspace, nor
does it have real hardware or firmware rings, it's not necessary to
signal timedout fences nor free jobs - from a functional standpoint.
Still, the dma_fence framework establishes the hard rule that all fences
must always get signaled.
The unit tests, moreover, should as much as possible represent the
intended usage of the scheduler API.
Furthermore, this later enables simplifying the mock scheduler's
teardown code path.
Make sure timed out hardware fences get signaled with the appropriate
error code.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250605134154.191764-2-phasta@kernel.org
Use drm dp helper to enable backlight now that it has been modified
to set PANEL_LUMINANCE_CONTROL_ENABLE bit based on if capability
supports it and the driver wants it. Remove the dead code.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-14-suraj.kandpal@intel.com
Now that drm_edp_backlight init has been modified to take
into account the setup of lumininace based brightness manipulation
we can just use that.
--v2
-Fix commit message [Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-12-suraj.kandpal@intel.com
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
--v2
-No need to typecast [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
Modify drm_edp_backlight_set_level to be able to set the value
for register in DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We multiply
the level with 1000 since we get the value in Nits and the
register accepts it in milliNits.
--v2
-Add comment regarding the unit [Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-9-suraj.kandpal@intel.com
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
--v2
-Typecase is not needed [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
Modify drm_edp_probe_state to read current level from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We divide it by
1000 since the value in this register is in millinits.
--v2
-Add comment on the unit sent back [Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-7-suraj.kandpal@intel.com
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
