Instead printing static offset values, print number of allocated
pages and the actual GGTT addresses of the page zero source and
status and address of the common mask vector.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patch.msgid.link/20260518192547.600-7-michal.wajdeczko@intel.com
When using MSI-X, we don't have to allocate the largest possible
buffer to accommodate all potential engine instances. Loop through
available engines, find highest engine instance and reduce buffer
size to avoid memory waste.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patch.msgid.link/20260518192547.600-6-michal.wajdeczko@intel.com
We can now drop repeated calculations of the actual IRQ page used
by the engines from our memory based interrupt handler and other
functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patch.msgid.link/20260518192547.600-5-michal.wajdeczko@intel.com
Introduce and use simple macro to calculate exact location of the
status vector to avoid inline calculation. Fix type for the GuC
source and status MEMIRQ addresses.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patch.msgid.link/20260518192547.600-4-michal.wajdeczko@intel.com
There is no need to expose the macros describing memory-based
interrupts page layouts in the .h file as we only use them in
the private code. Move them to the .c file near the kernel-doc.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patch.msgid.link/20260518192547.600-3-michal.wajdeczko@intel.com
For each HW engine definition, we already make changes to the IRQ
offset, as required when using MSI-X, but we leave actual MEMIRQ
page selection to the MEMIRQ handler, repeated on every interrupt.
As a preparation step to simplify the MEMIRQ handler, store the
MEMIRQ page number as part of the HW engine definition.
Suggested-by: Ilia Levi <ilia.levi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patch.msgid.link/20260518192547.600-2-michal.wajdeczko@intel.com
If devm_request_threaded_irq() fails after drm_bridge_add(), remove the
bridge before returning.
Keep drm_bridge_add() rather than devm_drm_bridge_add(): registration is
tied to the STDP4028 device while ge_b850v3_register() may complete from
either I2C probe; devm would not unwind the bridge if the other client's
probe fails.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Fixes: fcfa0ddc18 ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260430195700.80317-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use devm_drm_bridge_add() so the bridge is released if probe fails after
registration, and drop drm_bridge_remove() in chipone_dsi_probe.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260430194944.78119-2-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use devm_drm_bridge_add() so the bridge is released if probe
fails after registration, and drop drm_bridge_remove() in chipone_i2c_probe.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Fixes: 8dde6f7452 ("drm: bridge: icn6211: Add I2C configuration support")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260430194944.78119-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
There is Intel specific workaround DPCD address containing workaround for
case where SDP is on prior line. Apply this workaround according to values
in the offset.
Fixes: 61e887329e ("drm/i915/xelpd: Handle PSR2 SDP indication in the prior scanline")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515095756.2799483-4-jouni.hogander@intel.com
(cherry picked from commit c3fe899fbe)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Read Intel DPCD workaround register and store it into
intel_connector->dp.psr_caps. psr_caps was chosen as currently it contains
only PSR workaround for PSR2 SDP on prior scanline implementation.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515095756.2799483-3-jouni.hogander@intel.com
(cherry picked from commit c48ff24d0f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
EDP specification says:
"If either VSC SDP is unable to be transmitted 100 ns before the SU region,
the Source device may optionally transmit the VSC SDP during the prior
video scan line’s HBlank period There is a Intel specific drm dp register
currently containing bits related how TCON can support PSR2 with SDP on
prior line."
Unfortunately many panels are having problems in implementing this. So
there is a custom Intel specific DPCD register (INTEL_WA_REGISTER_CAPS) to
figure out if this is properly implemented on a panel or if panel doesn't
require that 100 ns delay before the SU region. Here are the definitions in
this custom DPCD address:
0 = Panel doesn't support SDP on prior line
1 = Panel supports SDP on prior line
2 = Panel doesn't have 100ns requirement
3 = Reserved
Add definitions for this new register and it's values into new header
intel_dpcd.h.
v2: add INTEL_DPCD_ prefix to definitions
Bspec: 74741
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515095756.2799483-2-jouni.hogander@intel.com
(cherry picked from commit 1da1c92948)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Correct the bit-shift logic to properly readback the 10 bit target_rr from
DB3 and DB4.
v2: Align the style with readback for vtotal. (Ville)
Fixes: 12ea892916 ("drm/i915/dp: Add Read/Write support for Adaptive Sync SDP")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260511123218.1589830-2-ankit.k.nautiyal@intel.com
(cherry picked from commit f7abc4af2b)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
When copying plane color state in a joiner configuration, use the plane in
the primary joiner pipe since it carries the pipeline number selected by
the user-space.
This assumes that all pipes in the joiner are symmetric in their plane
color capabilities.
Cc: stable@vger.kernel.org # v6.19+
Fixes: a78f1b6baf ("drm/i915/color: Add framework to program CSC")
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260511053213.3122314-2-chaitanya.kumar.borah@intel.com
(cherry picked from commit e8308fb5e0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
v3d_get_cpu_indirect_csd_params() takes a reference to the indirect BO via
drm_gem_object_lookup() and stashes it in cpu_job->indirect_csd.indirect,
but nothing on the CPU job teardown path ever drops that reference.
Drop the extra reference in v3d_cpu_job_free(). The NULL check covers ioctl
errors before the lookup ran and CPU job types other than
V3D_CPU_JOB_TYPE_INDIRECT_CSD, which leave the field zero-initialised.
Cc: stable@vger.kernel.org
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-2-7f147cbbf935@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and
performance query arrays after v3d_job_cleanup(), which drops the job's
last reference and frees cpu_job. Reading cpu_job at that point is a
use-after-free. Also, on the early v3d_job_init() failure path, it is a
NULL dereference, since v3d_job_deallocate() zeroes the local pointer.
In the success path, the arrays are released from the scheduler's
.free_job callback, but on the error path, they are freed manually, as
the job was never pushed to the scheduler. While the success path deals
with this correctly, the fail path doesn't.
On top of that, the manual kvfree() calls only free the array storage;
they don't drm_syncobj_put() the per-query syncobjs that
v3d_timestamp_query_info_free() and v3d_performance_query_info_free()
release on the success path. So the same fail path that triggers the
use-after-free also leaks one syncobj reference per query.
Unify the CPU job teardown into the CPU job's kref destructor, mirroring
v3d_render_job_free(). The scheduler's .free_job slot reverts to the
generic v3d_sched_job_free() and the fail label drops the manual
kvfree() calls, leaving a single teardown path that is reached from both
the scheduler and the ioctl error path. That removes the use-after-free,
the NULL dereference, and the syncobj leak by construction.
Cc: stable@vger.kernel.org
Fixes: 9ba0ff3e08 ("drm/v3d: Create a CPU job extension for the timestamp query job")
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-1-7f147cbbf935@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
[Why]
Some eDP panels return sinkstatus as 0x5, causing the original sinkstatus == 1
check to never match and resulting in unnecessary polling delay. The
equality check is too restrictive and doesn't properly validate the
specific status bit that indicates receiver readiness.
[How]
Replace direct value comparison with proper bitmask check using
DP_RECEIVE_PORT_0_STATUS constant.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung-huai Wang <Danny.Wang@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This reverts commit f71d0b68ec.
1. Auto-generated Header: The file 'dmub_cmd.h' is an auto-generated header
managed in an external repository (dmu_stg). Manual changes made directly in
this repository will be overwritten and lost during the next automated weekly
synchronization.
2. Tooling Compatibility: This header is governed by internal AMD firmware
standards which require Doxygen formatting for cross-team documentation.
Moving to kernel-doc syntax may break internal documentation pipelines.
3. Suppressing Warnings: Current 'make htmldocs' and 'make W=1' builds
do not actively scan 'dmub_cmd.h' for kernel-doc compliance, thus no warnings
are triggered during standard compilation. To address warnings generated when
manually running './scripts/kernel-doc', we have added a notice at the file
header indicating that this is an auto-generated file that does not strictly
follow kernel-doc formatting. This ensures that any future linting tools or
manual checks recognize the formatting as intentional.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Some DCN4.2 related code is missing from upstream
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Acked-by: ChiaHsuan Chung <ChiaHsuan.Chung@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_pmops_runtime_suspend() runs almost the same code that
amdgpu_pmops_runtime_idle() runs. That is there is pointless code
duplication.
[How]
Move amdgpu_pmops_runtime_idle() up, extract common code and then
call from both functions. No intended functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_seq64_alloc there is a possibility that two difference cores
from two separate NODES can try to and could get the same free slot.
So this fixes that race here using atomic test_and_set clear operations.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
This may fix VM faults when using VCE 3.
Cc: John Olender <john.olender@gmail.com>
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Additionally, increase the VCE_V2_0_DATA_SIZE to
have extra space after the VCE handles.
Also increase the data size used for each VCE handle.
The FW needs 23744 bytes, use 24K to be safe.
This fixes VM faults when using VCE 2.
Cc: John Olender <john.olender@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4802
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCE1 firmware works slightly differently and is already
loaded by vce_v1_0_load_fw(). It doesn't actually need to
call amdgpu_vce_resume().
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
Fixes: d4a640d4b9 ("drm/amdgpu/vce1: Implement VCE1 IP block (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only allocate entries from the GTT manager when the
VCE GTT node is not allocated yet. This prevents the
possibility of allocating them multiple times, which
causes issues during GPU reset and suspend/resume.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, I had assumed this was not possible
so it was OK to not handle it, but now we got a report
from a user who has a board that is configured this way.
When the VCPU BO is already located in a low 32-bit address
in VRAM (eg. when VRAM is mapped to the low address space),
don't do the workaround.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same thing is already checked a few lines above.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ensuring the low 32-bit address, make sure it is
less than 128 MiB, otherwise the VCE seems to fail to initialize.
This seems to be an undocumented limitation of the firmware
validation mechanism. Note that in case of VCE1 the BAR
address is zero and we can't change it also due to the
firmware validator.
When programming the mmVCE_VCPU_CACHE_OFFSETn registers,
don't AND them with a mask. This is incorrect because
the register mask is actually 0x0fffffff and useless because
we already ensure the addresses are below the limit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The TLB is organized in groups of 8 entries, each one is 4K.
On Tahiti, the HW requires these GART entries to be 32K-aligned.
This fixes a VCE 1 firmware validation failure that can happen
after suspend/resume since we use amdgpu_gtt_mgr for VCE 1.
v2:
- Change variable declaration order
- Add comment about "V bit HW bug"
Fixes: 698fa62f56 ("drm/amdgpu: Add helper to alloc GART entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In smu_v15_0_fini_smc_tables, dpm_policies was not freed or NULLed, causing a memory leak.
Add kfree() and NULL assignment to properly release memory and avoid dangling pointers.
Fixes: 2beedc3a92 ("drm/amd/pm: Add initial support for smu v15_0_8");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After suspend/resume sdma_gang is supported on MES 12.1, SDMA queue reset
is supported too.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
suspend_all_sdma_gangs is supported in new MES firmware for gfx 12.1
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_virt_ras_get_batch_records() indexed batchs[] and records[]
from ras_cmd_batch_trace_record_rsp copied out of shared memory without
fully bounding the cache window or per-batch offset/trace_num. A
tampered or corrupted buffer could set real_batch_num past the array,
make a naive start_batch_id + real_batch_num comparison wrap in
uint64_t, or point offset+trace_num past records[].
Add amdgpu_virt_ras_check_batch_cached() for a subtraction-based window
with a real_batch_num cap, re-run it after GET_BATCH_TRACE_RECORD, and
use an explicit batch index into batchs[]. Consolidate batch_id,
trace_num, and offset+trace_num checks; on any failure memset the cache
and return -EIO so the next call refetches.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3:
improve the coding style.
v2:
use debugfs_create_x64 and debugfs_create_x8 to create node.
v1:
1. Add guest driver CUID support
2. Do not expose vf index(variable "fcn_idx") to customers,
replace the fcn_idx with pad.
Only expose the unitid to customers.
background:
Change fcn_idx to pad, VF index won't expose to guest vm.
Introduce a new unitid field as the VF identifier to replace the VF index:
1).unitid is assigned by the host driver
2).It is delivered to the guest via the pf2vf message
3).The application or umd can retrieve united from the sysfs node
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Discovery table may be kept at offset 0 by host driver. Remove the
validation check.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
va_cursor struct needs to be cleaned even if the mapping
has been removed already.
Also simplify it by make it a void function as return value
check isn't needed as its called during tear down.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr
and only discovers an out-of-range pointer much later, inside
amdgpu_gem_object_create() and the HMM mirror registration path.
Userspace can drive that path with kernel-side virtual addresses;
the get_user_pages() layer rejects them, but only after the driver
has already allocated a GEM object and started wiring up notifier
state that then has to be torn down on failure.
Add an access_ok() guard at the top of the ioctl, right after the
existing page-alignment check and before flag validation, so any
address that does not lie within the calling task's user address
range is rejected with -EFAULT before any allocation occurs. No
legitimate ROCm/HSA userspace passes kernel-mode pointers through
this interface, so this is defense-in-depth rather than a behaviour
change for valid callers; -EFAULT matches the convention already
used by other uaccess-style rejections in the kernel.
Also add an explicit #include <linux/uaccess.h>; access_ok() is
otherwise only available transitively through other headers in
this translation unit.
Signed-off-by: Amir Shetaia <Amir.Shetaia@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VPE1 could possibly hang and fail to power off at the end of commands in
collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to
force instances synchronized to avoid VPE1 fail to power off.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alan liu <haoping.liu@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pagefaults does not have process information correctly populated
as vm->task is not set during vm_init but should be updated while
real submission. So setting that up during signal_ioctl to get
the correct submission process details.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While tear down of a userq_mgr is happening when all the queues
are free we should cancel any reset work if pending before exiting.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The depends on !UML was added in commit dffe681317 ("amdgpu: Avoid
building on UML") to work around build failures with allyesconfig on
UML. The original errors were:
- smu7_hwmgr.c: incompatible pointer type 'struct cpuinfo_um *' vs
'struct cpuinfo_x86 *' in intel_core_rkl_chk()
- kfd_topology.c: 'struct cpuinfo_um' has no member named 'apicid'
Both issues have since been resolved independently:
- intel_core_rkl_chk() has been removed entirely.
- kfd_topology.c now uses a proper #ifdef CONFIG_X86_64 guard.
- All other cpuinfo_x86/cpu_data() references in the driver are
guarded by #if IS_ENABLED(CONFIG_X86) or #ifdef CONFIG_X86_64.
Removing this exclusion allows CONFIG_DRM_AMDGPU to be selected on UML,
which in turn enables running KUnit tests (such as amdgpu_dm_crc_test)
under UML without needing a full hardware-capable kernel build.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is illegal to schedule reset work from another reset work!
Fix this by scheduling the userq reset work directly on the work queue
of the reset domain.
Not fully tested, I leave that to the IGT test cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To access the bo from vm mapping first lock the root bo and
then the object bo of the mapping to make sure both locks
are taken safely.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We encapsulate the logic to check if the platform has L2 flush
optimization feature in xe_device_is_l2_flush_optimized(), but
guc_ctl_feature_flags() is using an open-coded version of that same type
of check. Fix that by replacing the open-coded check with
xe_device_is_l2_flush_optimized().
Reviewed-by: Himanshu Girotra <himanshu.girotra@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patch.msgid.link/20260513-guc-l2-flush-opt-use-xe_device_is_l2_flush_optimized-v1-1-36fa866d6ed8@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
