It is easy to skip or ignore the fact that the default SSPP feature
masks for SDM845+ don't include the SmartDMA bit (both during
development and during the review stage). Rename SSPP feature masks to
make it more explicit that using non-SmartDMA masks should not be an
exception rather than the rule.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/650425/
Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-5-c71900687d08@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Since SmartDMA planes provide two rectangles, it is possible to use them
to drive two different DRM planes, first plane getting the rect_0,
another one using rect_1 of the same SSPP. The sharing algorithm is
pretty simple, it requires that each of the planes can be driven by the
single rectangle and only consecutive planes are considered.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650441/
Link: https://lore.kernel.org/r/20250426-dpu-share-sspp-v7-1-6f4c719e373c@oss.qualcomm.com
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
LVDS support in MDP4 driver makes use of drm_connector directly. However
LCDC encoder and LVDS connector are wrappers around drm_panel. Switch
them to use drm_panel_bridge/drm_bridge_connector. This allows using
standard interface for the drm_panel and also inserting additional
bridges between encoder and panel.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650290/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-6-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Instead of using .parent_names, use .parent_data, which binds parent
clocks by using relative names specified in DT in addition to using global
system clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650284/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-4-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The LVDS/LCDC controller uses pixel clock coming from the multimedia
controller (mmcc) rather than using the PLL directly. Stop using LVDS
PLL directly and register it as a clock provider. Use lcdc_clk as a
pixel clock for the LCDC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/650280/
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-3-6b212160b44c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/647875/
Link: https://lore.kernel.org/r/20250410025221.3358387-1-nichen@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Now as we have dropped the DPU_CTL_SPLIT_DISPLAY from DPU >= 5.0
configuration, drop the rm->has_legacy_ctl condition which short-cutted
the check for those platforms.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641586/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-8-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Since DPU 5.0 CTL blocks do not require DPU_CTL_SPLIT_DISPLAY, as single
CTL is used for both interfaces. As both RM and encoder now handle
active CTLs, drop that feature bit.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641592/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-7-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Unlike previous generation, since DPU 5.0 it is possible to use just one
CTL to handle all INTF and WB blocks for a single output. And one has to
use single CTL to support bonded DSI config. Allocate single CTL for
these DPU versions.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641587/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-6-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On DPU >= 5.0 CTL blocks were reworked in order to support using a
single CTL for all outputs. In preparation of reworking the RM code to
return single CTL make sure that dpu_encoder can cope with that.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/641582/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-4-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
If several interfaces are being handled through a single CTL, a main
('master') INTF needs to be programmed into a separate register. Write
corresponding value into that register.
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/641581/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-2-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In case of complex pipelines (e.g. the forthcoming quad-pipe) the DPU
might use more that one MERGE_3D block for a single output. Follow the
pattern and extend the CTL_MERGE_3D_ACTIVE active register instead of
simply writing new value there. Currently at most one MERGE_3D block is
being used, so this has no impact on existing targets.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/641580/
Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-1-5d20655f10ca@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
As seen in some recent failures, SLPC num_waiters value is < 0.
This happens because the inc/dec are not balanced. We should skip
decrement for the same conditions as the increment. Currently, we
do that for power saving profile mode. This patch also ensures that
num_waiters is incremented in the case min_softlimit is at boost
freq. It ensures that we don't reduce the frequency while this request
is in flight.
v2: Add Fixes tags
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13598
Fixes: f864a29afc ("drm/i915/slpc: Optmize waitboost for SLPC")
Fixes: 4a82ceb04a ("drm/i915/slpc: Add sysfs for SLPC power profiles")
Cc: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250428183555.3250021-1-vinay.belgaumkar@intel.com
drm/i915 fixes for v6.15-rc5:
- Fix build for CONFIG_DRM_I915_PXP=n
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87selquhpe.fsf@intel.com
If a user ctrl-c an app while something is running on the GPU, jobs are
expected to timeout. Do not spam dmesg with timedout job messages in
this case.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250428175505.935694-1-matthew.brost@intel.com
EU stall sampling is not supported on SRIOV VF. Do not
initialize or open EU stall stream on SRIOV VF.
Fixes: 9a0b11d4cf ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/10db5d1c7e17aadca7078ff74575b7ffc0d5d6b8.1745215022.git.harish.chegondi@intel.com
(cherry picked from commit 6ed20625a4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
(cherry picked from commit c2b1f1b864)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The device core dumps are copied in 1.5GB chunks, which leads to a
link-time error on 32-bit builds because of the 64-bit division not
getting trivially turned into mask and shift operations:
ERROR: modpost: "__moddi3" [drivers/gpu/drm/xe/xe.ko] undefined!
On top of this, I noticed that the ALIGN_DOWN() usage here cannot
work because that is only defined for power-of-two alignments.
Change ALIGN_DOWN into an explicit div_u64_rem() that avoids the
link error and hopefully produces the right results.
Doing a 1.5GB kvmalloc() does seem a bit suspicious as well, e.g.
this will clearly fail on any 32-bit platform and is also likely
to run out of memory on 64-bit systems under memory pressure, so
using a much smaller power-of-two chunk size might be a good idea
instead.
v2:
- Always call div_u64_rem (Matt)
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504251238.JsNgFeFc-lkp@intel.com/
Fixes: c4a2e5f865 ("drm/xe: Add devcoredump chunking")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250501012545.1045247-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c)
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cd)
Cc: stable@vger.kernel.org
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689)
DRM_DISPLAY_DP_AUX_BUS cannot be selected when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_DISPLAY_DP_AUX_BUS
Depends on [n]: HAS_IOMEM [=y] && DRM [=y] && OF [=n]
Selected by [y]:
- DRM_ROCKCHIP [=y] && HAS_IOMEM [=y] && DRM [=y] && ROCKCHIP_IOMMU [=y] && ROCKCHIP_ANALOGIX_DP [=y]
Rockchip platforms all depend on OF anyway, so add the dependency here
for compile testing.
Fixes: d7b4936b2b ("drm/rockchip: analogix_dp: Add support to get panel from the DP AUX bus")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250423164422.2793634-1-arnd@kernel.org
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaBHeEAAKCRAnX84Zoj2+
dhb5AX9S1pdDpVG6iwarQwzJLKfUSVTClq0K7F60+binY9VBycAcdnmBPE7y9mvo
ib1adKABfRMDLgj+rYPdF7Vrw/sHpkwmRpM07efBJFa8tC0z1FsVyf2FmYp6+75Y
0g6MxpkrFw==
=Gzph
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-04-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A spurious WARN fix for nouveau, an init and interrupt handling fixes
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250430-dark-eggplant-trout-c4ea6c@houat
[WHY]
Improve the output when using the ftrace debug feature,
making it easier to identify which function is currently being executed.
[HOW]
Rename the program_timing function to a name that
includes the path to the function's file.
Signed-off-by: Antonio Fernando Silva e Cruz Filho <fernando.cruz.ctt@gmail.com>
Co-developed-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com>
Signed-off-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "ticket" pointer points to in the middle of the &exec struct so it
can't be NULL. Remove the check.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path should call amdgpu_bo_unreserve() before returning.
Fixes: d8675102ba ("drm/amdgpu: add vm root BO lock before accessing the vm")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kernel queues are disabled, all GC vmids are available
for the scheduler. MM vmids are still managed by the driver
so make all 16 available.
Also fix gmc 10 vs 11 mix up in
commit 1f61fc28b9 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
v2: Properly handle pre-GC 10 hardware
Fixes: 1f61fc28b9 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
Cc: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the KIQ pipe for kernel queues and the SCHED pipe for
user queues.
Fixes: 2408b0272b ("drm/amdgpu/mes: consolidate on a single mes reset callback")
Cc: Michael Chen <Michael.Chen@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the legacy one as it covers both kernel queues and
user queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from mes bring up and are unused.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If it needs a long wait for completion of bootloader execution, report
the status in between. That helps to know if there is some issue during
bootloader execution.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Register access print missed device info.
[How]
Using dev_xxx instead of DRM_xxx to indicate which device
of a hive is the message for.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the register offsets as per link order for querying XGMI v6.4.1
link status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Fixes: 6dee64e765 ("drm/amdgpu: Fix xgmi v6.4.1 link status reporting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>