For an unknown reason the math to determine the PF queue size does is
not correct - compute UMD applications are overflowing the PF queue
which is fatal. A multippier of 8 fixes the problem.
Fixes: 3338e4f90c ("drm/xe: Use topology to determine page fault queue size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250408155915.78770-1-matthew.brost@intel.com
The LE_COS definition missed passing the value parameter to
REG_FIELD_PREP. This didn't cause build errors because the entire
macro was unused.
The value for this field is universally "0" for every MOCS entry on
the old Xe_LP platforms, and the whole field has been removed from
Xe_HP onward. Just delete the line so that we don't have an unused
definition.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250405171539.599850-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe7 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e7b08d239)
Cc: stable@vger.kernel.org # 6.12.x
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da7dc714a8)
Cc: stable@vger.kernel.org
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca23 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a15495 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad45167)
Cc: stable@vger.kernel.org
Pause the workload setting in dm when doing idle optimization
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b23f81c442)
Add the callback for implementation for swsmu.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92e511d1ce)
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6dafb5d4c7)
Going forward, struct intel_display is the main display device data
pointer. Convert the i9xx_wm.h interface to struct intel_display.
With this, we can make intel_wm.c independent of i915_drv.h.
v2: Also remove i915_drv.h, fix commit message
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/3e30634d85c0e0aac9c95f9a2f928131ba400271.1744119460.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unify the naming of the data and clock lane timing parameters, and
simplify their bounds checks. Drop the debug messages on out of bounds
parameters as excessive.
Clarify the comment while at it.
Cc: William Tseng <william.tseng@intel.com>
Reviewed-by: William Tseng <william.tseng@intel.com>
Tested-by: William Tseng <william.tseng@intel.com>
Link: https://lore.kernel.org/r/d1a75ae7b9d93a0b50976b5de45ba2ca798991ad.1743682608.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The history of why the max of VBT clock and data lane prepare timing
parameter is used for both instead of each individually is
unknown. Separate them to follow what the Windows driver does.
Cc; William Tseng <william.tseng@intel.com>
Reviewed-by: William Tseng <william.tseng@intel.com>
Tested-by: William Tseng <william.tseng@intel.com>
Link: https://lore.kernel.org/r/079a26d0aae79f299aee0397dad2d6519cd55071.1743682608.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable survivability mode if supported and configfs attribute is set.
Enabling survivability mode manually is useful in cases where pcode does
not detect failure, validation and for IFR (in-field-repair).
To set configfs survivability mode attribute for a device
echo 1 > /sys/kernel/config/xe/0000:03:00.0/survivability_mode
The card enters survivability mode if supported
v2: add a log if survivability mode is enabled for unsupported
platforms (Rodrigo)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-4-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add survivability mode document to pcode document as it is enabled
when pcode detects a failure.
v2: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Registers a configfs subsystem called 'xe' that creates a
directory in the mounted configfs directory (/sys/kernel/config)
Userspace can then create the device that has to be configured
under the xe directory
mkdir /sys/kernel/config/xe/0000:03:00.0
The device created will have the following attributes to be
configured
/sys/kernel/config/xe/
.. 0000:03:00.0/
... survivability_mode
v2: fix kernel-doc
fix return value (Lucas)
v3: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When the parameter is set, disable user submissions
to kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the parameter is set, disable user submissions
to kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SDMA, we still need kernel queues for paging so
they need to be initialized, but we no not want to
accept submissions from userspace when disable_kq
is set.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plumb in support for disabling kernel queues.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
v5: clean up after removing extra sched.ready settings
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plumb in support for disabling kernel queues in
GFX11. We have to bring up a GFX queue briefly in
order to initialize the clear state. After that
we can disable it.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we don't have kernel queues, the vmids can be used by
the MES for user queues.
Acked-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make all resources available to user queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add proper checks for disable_kq functionality in
gfx helper functions. Add special logic for families
that require the clear state setup.
v2: use ring count as per Felix suggestion
v3: fix num_gfx_rings handling in amdgpu_gfx_graphics_queue_acquire()
v4: fix error code (Alex)
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This would be set by IPs which only accept submissions
from the kernel, not userspace, such as when kernel
queues are disabled. Don't expose the rings to userspace
and reject any submissions in the CS IOCTL.
v2: fix error code (Alex)
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips that support user queues, setting this option
will disable kernel queues to be used to validate
user queues without kernel queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to KFD, prevent runtime pm while user queues are active.
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can iterate across them when we need to manage
all user queues.
v2: add uq_mgr to adev list in amdgpu_userq_mgr_init
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an INFO query to check if user queues are supported.
v2: switch to a mask of IPs (Marek)
v3: move to drm_amdgpu_info_device (Marek)
Cc: marek.olsak@amd.com
Cc: prike.liang@amd.com
Cc: sunil.khatri@amd.com
Cc: yogesh.mohanmarimuthu@amd.com
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a separate switch statement for the userq callback
assignment so that we can assign the callbacks for each
asic as the firmware becomes available.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the ME details fixed, we can now consolidate
this state. Also split out the userq setup into a separate
switch statement so that we can set them per IP version
when the firmwares are ready.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The display is freezing because the amdgpu_userq_wait_ioctl()
is waiting for a non-user queue fence(specifically, the PT update fence).
RootCause:
The resume_work is initiated by both amdgpu_userq_suspend and
amdgpu_userqueue_ensure_ev_fence at same time. The amdgpu_userq_suspend
signals a dma-fence and subsequently triggers the resume_work, which is
intended to replace the existing fence by creating new dma-fence. However,
following this, the amdgpu_userqueue_ensure_ev_fence schedules another
resume_work that generates a new dma-fence, thereby replacing the one
created by amdgpu_userq_suspend. Consequently, the original fence will
never be signaled.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Warn if the number of pipes exceeds what the MES supports.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it to amdgpu_mes to align with the compute and
sdma hqd masks. No functional change.
v2: rebase on new changes
v3: misc optimizations
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was leftover from MES bring up when we had MES
user queues in the kernel. It's no longer used so
remove it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover from the MES self tests that were removed previously.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure these are set properly to ensure compatibility if
we ever update the IOCTL interface.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Encountering a taint issue during the unloading of gpu_sched
due to the fence not being released/put. In this context,
amdgpu_vm_clear_freed is responsible for creating a job to
update the page table (PT). It allocates kmem_cache for
drm_sched_fence and returns the finished fence associated
with job->base.s_fence. In case of Usermode queue this finished
fence is added to the timeline sync object through
amdgpu_gem_update_bo_mapping, which is utilized by user
space to ensure the completion of the PT update.
[ 508.900587] =============================================================================
[ 508.900605] BUG drm_sched_fence (Tainted: G N): Objects remaining in drm_sched_fence on __kmem_cache_shutdown()
[ 508.900617] -----------------------------------------------------------------------------
[ 508.900627] Slab 0xffffe0cc04548780 objects=32 used=2 fp=0xffff8ea81521f000 flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
[ 508.900645] CPU: 3 UID: 0 PID: 2337 Comm: rmmod Tainted: G N 6.12.0+ #1
[ 508.900651] Tainted: [N]=TEST
[ 508.900653] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F34 06/10/2021
[ 508.900656] Call Trace:
[ 508.900659] <TASK>
[ 508.900665] dump_stack_lvl+0x70/0x90
[ 508.900674] dump_stack+0x14/0x20
[ 508.900678] slab_err+0xcb/0x110
[ 508.900687] ? srso_return_thunk+0x5/0x5f
[ 508.900692] ? try_to_grab_pending+0xd3/0x1d0
[ 508.900697] ? srso_return_thunk+0x5/0x5f
[ 508.900701] ? mutex_lock+0x17/0x50
[ 508.900708] __kmem_cache_shutdown+0x144/0x2d0
[ 508.900713] ? flush_rcu_work+0x50/0x60
[ 508.900719] kmem_cache_destroy+0x46/0x1f0
[ 508.900728] drm_sched_fence_slab_fini+0x19/0x970 [gpu_sched]
[ 508.900736] __do_sys_delete_module.constprop.0+0x184/0x320
[ 508.900744] ? srso_return_thunk+0x5/0x5f
[ 508.900747] ? debug_smp_processor_id+0x1b/0x30
[ 508.900754] __x64_sys_delete_module+0x16/0x20
[ 508.900758] x64_sys_call+0xdf/0x20d0
[ 508.900763] do_syscall_64+0x51/0x120
[ 508.900769] entry_SYSCALL_64_after_hwframe+0x76/0x7e
v2: call dma_fence_put in amdgpu_gem_va_update_vm
v3: Addressed review comments from Christian.
- calling amdgpu_gem_update_timeline_node before switch.
- puting a dma_fence in case of error or !timeline_syncobj.
v4: Addressed review comments from Christian.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be enabled now. We have the firmware checks
in place.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently disabled until the firmwares are officially
released.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>