This reverts commit 20e0c19780.
Despite claiming to add GA100 support, that commit actually has quite
a few problems. It falsely claims that there is no VBIOS. GA100 does
have a VBIOS, but it has no display engine, so it cannot use the
PRAMIN method the read VBIOS and must fall back to using PROM.
For whatever reason, the VBIOS on GA100 has an "Init-from-ROM"
(IFR) header where the PCI Expansion ROM would normally be found.
So to find that ROM, Nouveau needs to parse the IFR header.
The commit also falsely claimed that there is no graphics (GR) engine.
So rather than try to fix that commit, just revert it and start over
from scratch.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add an MMU_AS_CONTROL local iomem pointer to struct panthor_mmu and
switch AS register accesses to that base.
Interrupt accesses remain routed through the IRQ-local iomem base, while
the MMU register definitions are adjusted so AS registers are expressed
relative to the local MMU AS window. This completes the conversion away
from using the global device mapping for MMU AS register accesses.
No functional change intended.
v3:
- Pick up R-bs from Liviu and Steve
v2:
- Pick up Ack from Boris.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-9-karunika.choo@arm.com
Add an MCU_CONTROL-local iomem pointer to struct panthor_fw and use it
for firmware control and status register accesses.
Job interrupt accesses continue to go through the IRQ-local base, while
doorbell writes stay on the device-wide mapping because they live
outside the MCU control window. This keeps firmware register accesses
scoped to the component that owns them.
No functional change intended.
v3:
- Pick up R-bs from Liviu and Steve
v2:
- Pick up Ack from Boris.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-8-karunika.choo@arm.com
Add a PWR_CONTROL-local iomem pointer to struct panthor_pwr and switch
power controller register accesses to that base.
Update IRQ-local iomem base to use PWR_CONTROl-local iomem and update
the register definitions so the PWR block can be addressed relative to
its local base. This removes the remaining dependence on the global
device MMIO mapping for PWR register accesses. Update
panthor_gpu_info_init() to also use the correct PWR_CONTROL iomem for
the *_PRESENT registers.
No functional change intended.
v3:
- Clean up definitions for pwr->iomem and pwr->irq.iomem.
- Update PWR_INT_BASE to be relative to pwr->iomem.
v2:
- Update panthor_gpu_info_init() to use block-local iomem pointer.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-7-karunika.choo@arm.com
Add a GPU_CONTROL-local iomem pointer to struct panthor_gpu and use it
for GPU register accesses.
This limits GPU register accesses to the GPU block instead of using the
device-wide MMIO mapping directly. Interrupt register accesses continue
to use the IRQ-local base provided by the common IRQ helpers. Update
panthor_gpu_info_init() to also use a local iomem offset for GPU
features and capability.
This is a refactoring only and does not change behaviour.
v3:
- Pick up R-bs from Liviu and Steve
v2:
- Update panthor_gpu_info_init() to use block-local iomem pointer.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-6-karunika.choo@arm.com
Update common IRQ handling code to work from an IRQ-local iomem base
instead of referencing block-specific interrupt register offsets.
Store the interrupt base address iomem pointer in struct panthor_irq and
switch the shared IRQ helpers to use generic INT_* offsets from that
local base. This removes the need for each caller to expose absolute IRQ
register addresses while keeping the common IRQ flow unchanged.
No functional change intended.
v3:
- Clean up definition of pwr->irq.iomem.
v2:
- Change IRQ request function to accept an iomem pointer instead of
computing it from an offset argument.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-5-karunika.choo@arm.com
Stop reaching into other components' registers directly and route those
operations through the component that owns them.
Move the timestamp/coherency helpers into panthor_gpu, add a doorbell
helper, and update call sites accordingly. This keeps register knowledge
local to each block and avoids spreading cross-component register
accesses across the driver.
This is a preparatory cleanup for using per-component iomem bases.
v3:
- Pick up Ack from Boris and R-bs from Liviu and Steve
v2:
- Fix incorrect spelling of timestamp helpers
- Fix unintended trailing backslash
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-4-karunika.choo@arm.com
Split the panthor register definitions into per-component headers for
the GPU, MMU, firmware, power and generic hardware registers.
This makes the register layout easier to follow and prepares the driver
for component-local iomem mappings by grouping definitions with the code
that owns them. The old monolithic panthor_regs.h header can then be
dropped.
No functional change intended.
v3:
- Pick up Ack from Boris and R-bs from Liviu and Steve
v2:
- Merge GPU_ID definitions into panthor_gpu_regs.h
- deleted panthor_hw_regs.h
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-3-karunika.choo@arm.com
Convert the Panthor register access helpers to take an iomem pointer
instead of a panthor_device pointer.
This makes the helpers usable with block-local registers instead of
routing all accesses to go through ptdev->iomem. It is a preparatory
change for splitting the register space by components and for moving
callers away from cross-component register accesses.
No functional change intended.
v3:
- Pick up R-bs from Liviu and Steve
v2:
- Pick up Ack from Boris.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-2-karunika.choo@arm.com
pf_migration_mmio_save() and pf_migration_mmio_restore() initialize a
local VF-specific MMIO view via xe_mmio_init_vf_view() but then pass
>->mmio (the PF base) to all xe_mmio_read32()/xe_mmio_write32()
calls instead of the local &mmio. This causes the PF own SW flag
registers to be saved/restored rather than the target VF registers,
silently corrupting migration state.
Use the VF MMIO view for all register accesses, matching the correct
pattern used in pf_clear_vf_scratch_regs().
Fixes: b7c1b990f7 ("drm/xe/pf: Handle MMIO migration data as part of PF control")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260429192259.4009211-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
PTR_ERR() returns a negative value, so comparing against the positive
EAGAIN is always true for ERR_PTR(-EAGAIN), causing pf_migration_consume()
to bail out instead of continuing to the remaining GTs. On multi-GT
platforms this can skip GTs that already have data ready.
Compare against -EAGAIN to match the intent (and the following line
that correctly uses -EAGAIN). While at it, gate PTR_ERR() with
IS_ERR().
v2: add IS_ERR() guard before PTR_ERR(). (Gustavo)
Fixes: 67df4a5cbc ("drm/xe/pf: Add data structures and handlers for migration rings")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260428201448.3999428-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Replace mutex_init()/mutex_destroy() with drmm_mutex_init() for the
VRAM manager lock. This leverages DRM managed infrastructure to
automatically destroy the mutex during device teardown, eliminating
manual mutex_destroy() calls in both the normal fini path and the
gpu_buddy_init() error path.
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260429093138.3899280-2-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
shmob_drm_connector_create() can init the connector in two ways, based on
the 'if (sdev->pdata)':
1. manually in shmob_drm_connector_create(), or
2. delegating to drm_bridge_connector_init()
Whichever branch is taken, drm_connector_attach_encoder() is called
immediately after to attach the connector to the encoder.
Now drm_bridge_connector_init() calls drm_connector_attach_encoder() on the
connector so it is not needed anymore in case 2 and should be removed, but
it is still needed in case 1. Move drm_connector_attach_encoder() from the
common path to inside shmob_drm_connector_create() in order to get back to
a single drm_connector_attach_encoder() in both cases.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423115550.444930-7-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_connector_attach_encoder() is now called by
drm_bridge_connector_init().
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423115550.444930-5-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
