Every module should have a description, without this we get a
build time warning.
Fixes: cc3e8a216d ("drm/imx: add internal bridge handling display-timings DT node")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-2-arnd@kernel.org
The driver now uses the legacy bridge helper code but can be configured
to get built without it:
ERROR: modpost: "devm_imx_drm_legacy_bridge" [drivers/gpu/drm/imx/ipuv3/parallel-display.ko] undefined!
Add the required dependency, same as in the ldb driver.
Fixes: f94b9707a1 ("drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-1-arnd@kernel.org
In commit 9f428b95ac ("drm/mediatek: Add new color format MACROs in
OVL"), some new color formats are defined in the MACROs to make the
switch statement more concise. That commit was intended to be a no-op
cleanup. However, there are typos in these formats MACROs, which cause
the return value to be incorrect. Fix the typos to ensure the return
value remains unchanged.
Fixes: 9f428b95ac ("drm/mediatek: Add new color format MACROs in OVL")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241016-color-v3-1-e0f5f44a72d8@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Since some SoCs support premultiplied pixel formats but some do not,
the blend_modes parameter is added to mtk_plane_init(), which is
obtained from the mtk_ddp_comp_get_blend_modes function implemented
in different blending supported components.
The blending supported components can use driver data to set the
blend mode capabilities for different SoCs.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-6-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
OVL_CON_CLRFMT_MAN is a configuration for extending color format
settings of DISP_REG_OVL_CON(n).
It will change some of the original color format settings.
Take the settings of (3 << 12) for example.
- If OVL_CON_CLRFMT_MAN = 0 means OVL_CON_CLRFMT_RGBA8888.
- If OVL_CON_CLRFMT_MAN = 1 means OVL_CON_CLRFMT_PARGB8888.
Since previous SoCs did not support OVL_CON_CLRFMT_MAN, this means
that the SoC does not support the premultiplied color format.
It will break the original color format setting of MT8173.
Therefore, the blend_modes is added to the driver data and then
mtk_ovl_fmt_convert() will check the blend_modes to see if
pre-multiplied is supported in the current platform.
If it is not supported, use coverage mode to set it to the supported
color formats to solve the degradation problem.
Fixes: a3f7f7ef4b ("drm/mediatek: Support "Pre-multiplied" blending in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Since we changed MACROs to be consistent with DRM input color format
naming, the comment for ovl_fmt_conver() is no longer needed.
Fixes: 9f428b95ac ("drm/mediatek: Add new color format MACROs in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-4-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Refine the comment for ignore_pixel_alpha flag and move it to
if(state->fb) statement to make it less conditional.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
OVL_CON_AEN is for alpha blending enable.
For the SoC that is supported the blend_modes, OVL_CON_AEN will always
enabled to use constant alpha and then use the ignore_pixel_alpha bit
to do the alpha blending for XRGB8888 format.
Note that ignore pixel alpha bit is not supported if the SoC is not
supported the blend_modes.
So it will break the original setting of XRGB8888 format for the
blend_modes unsupported SoCs, such as MT8173.
To fix the downgrade issue, enable alpha blending only when a valid
blend_mode or has_alpha is set.
Fixes: bc46eb5d5d ("drm/mediatek: Support DRM plane alpha in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
kstrdup_const() and kfree_const() can be confusing in code built as a
module. In such a case, it does not do what one could expect from the name
of the functions.
The code is not wrong by itself, but in such a case, it is equivalent to
kstrdup() and kfree().
So, keep thinks simple and straightforward.
This reverts commit 379b63e7e6 ("drm/i915/display: Save a few bytes of
memory in intel_backlight_device_register()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/f82be2ee3ac7d18dd9982b5368a88a5bf2aeb777.1727977199.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the existing macros in drm_dp.h for DPCD and DP AUX instead of
duplicating. Remove unused macros, as well as the duplicate definition
of DPCD_SIZE.
AUX_NATIVE_REPLY_NAK is left unchanged, as it does not match
DP_AUX_NATIVE_REPLY_NACK, and I'm not sure what the right thing to do is
here.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Zhi Wang <zhiwang@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930135342.3562755-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
we see an issue where resets fails because the engine resumes
from an incorrect RING_HEAD. Since the RING_HEAD doesn't point
to the remaining requests to re-run, but may instead point into
the uninitialised portion of the ring, the GPU may be then fed
invalid instructions from a privileged context, oft pushing the
GPU into an unrecoverable hang.
If at first the write doesn't succeed, try, try again.
v2: Avoid unnecessary timeout macro (Andi)
v3: Correct comment format (Andi)
v4: Make it generic for all platform as it won't impact (Chris)
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/5432
Testcase: igt/i915_selftest/hangcheck
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015145710.2478599-1-nitin.r.gote@intel.com
../drivers/gpu/drm/xe/display/xe_display.c: In function ‘xe_display_pm_shutdown’:
../drivers/gpu/drm/xe/display/xe_display.c:382:27: error: passing argument 1 of ‘intel_dmc_suspend’ from incompatible pointer type [-Werror=incompatible-pointer-types]
382 | intel_dmc_suspend(xe);
| ^~
| |
| struct xe_device *
In file included from ../drivers/gpu/drm/xe/display/xe_display.c:24:
../drivers/gpu/drm/i915/display/intel_dmc.h:22:46: note: expected ‘struct intel_display *’ but argument is of type ‘struct xe_device *’
22 | void intel_dmc_suspend(struct intel_display *display);
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
Fixes: c141cf7691 ("Merge drm/drm-next into drm-intel-next")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022080943.763580-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The drm_fb_helper_deferred_io() uses struct fb_deferred_io_pageref,
which isn't available without CONFIG_FB_DEFERRED_IO. Put the function
under corresponding #ifdef to fix build failure if deferred I/O isn't
enabled.
Fixes: 8058944f52 ("drm/fbdev: Select fbdev I/O helpers from modules that require them")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-fix-drm-deferred-v2-1-db1de4c6b042@linaro.org
The lite restore is a performance improvement feature which avoids
unnecessary context switch (flush, save and restore) if the incoming
context has a ContextID matching that of the outgoing context. The
scheduling is done by the GuC firmware, so on the driver side it's
just a matter of setting corresponding GUC_CTL_FEATURE flag.
This is supposed to be enabled by default, thus the flag is set
unconditionally.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017162710.942553-2-fei.yang@intel.com
It is impossible to add each and every possible DDP path combination
for each and every possible combination of SoC and board: right now,
this driver hardcodes configuration for 10 SoCs and this is going to
grow larger and larger, and with new hacks like the introduction of
mtk_drm_route which is anyway not enough for all final routes as the
DSI cannot be connected to MERGE if it's not a dual-DSI, or enabling
DSC preventively doesn't work if the display doesn't support it, or
others.
Since practically all display IPs in MediaTek SoCs support being
interconnected with different instances of other, or the same, IPs
or with different IPs and in different combinations, the final DDP
pipeline is effectively a board specific configuration.
Implement OF graphs support to the mediatek-drm drivers, allowing to
stop hardcoding the paths, and preventing this driver to get a huge
amount of arrays for each board and SoC combination, also paving the
way to share the same mtk_mmsys_driver_data between multiple SoCs,
making it more straightforward to add support for new chips.
Note that the OVL_ADAPTOR software component driver needs relatively
big changes in order to fully support OF Graphs (and more SoCs anyway)
and such changes will come at a later time.
As of now, the mtk_disp_ovl_adaptor driver takes the MERGE components
(for example, on mt8195, merge 1 to 4) dynamically so, even though
later updates to the ovl-adaptor driver will *not* require bindings
changes, the merge1-4 will be temporarily omitted in the graph for the
MT8195 SoC.
This means that an example graph for this SoC looks like:
mdp_rdma (0 ~ 7) -> padding (0 ~ 7) -> ethdr -> merge5
and the resulting path in this driver will be `ovl_adaptor -> merge5`
Later updates to the ovl adaptor will expand it to support more SoCs
and, in turn, to also fully support graphs.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Michael Walle <mwalle@kernel.org> # on kontron-sbc-i1200
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241017103809.156056-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Move the call to dpu_format_populate_plane_sizes() to the atomic_check
step, so that any issues with the FB layout can be reported as early as
possible.
At the same time move the call to dpu_format_populate_addrs() to
dpu_plane_sspp_atomic_update(). This way the all layout management is
performed only for the visible planes: the .prepare_fb callback is
called for not visible planes too, so keeping dpu_format_populate_addrs
in dpu_plane_prepare_fb() will require dpu_format_populate_plane_sizes()
to be called for !visible planes too.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612251/
Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-12-617e1ecc4b7a@linaro.org
The DPU driver isn't expected to be used without an IOMMU. Thus the
aspace will be always present. Not to mention that mdp4/mdp5 drivers
call msm_framebuffer_iova() without such checks, as the whole
msm_framebuffer layer is expected to support both IOMMU and IOMMU-less
configurations.
Drop these useless if (aspace) checks.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612249/
Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-6-617e1ecc4b7a@linaro.org
DRM's aperture functions have long been implemented as helpers
under drivers/video/ for use with fbdev. Avoid the DRM wrappers by
calling the video functions directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
./drivers/gpu/drm/msm/hdmi/hdmi_phy_8998.c:282:2-3: Unneeded semicolon
This patch removes an unneeded semicolon after a switch statement in the
pll_get_post_div function. Adding a semicolon after a switch statement is
unnecessary and can lead to confusion in the code structure.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9852
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/614767/
Link: https://lore.kernel.org/r/20240918023357.59399-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for MSM8996, which - fun fact - was the SoC that this driver
(or rather SDE, its downstream origin) was meant for and first tested on.
It has some hardware that differs from the modern SoCs, so not a lot of
current structs could have been reused. It's also seemingly the only SoC
supported by DPU that uses RGB pipes.
Note, by default this platform is still handled by the MDP5 driver
unless the `msm.prefer_mdp5=false' parameter is provided.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: rebased on top of sblk changes, add dpu_rgb_sblk]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[Removed intr_start from CTLs config, removed LM_3 and LM_4]
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/617309/
Link: https://lore.kernel.org/r/20240930-dpu-msm8953-msm8996-v2-1-594c3e3190b4@mainlining.org
The Qualcomm SA8775P platform comes with 2 DisplayPort controllers
for each mdss, having different base offsets than the previous
SoCs. The support for all 4 DPTX have been added here, and
validation of only MDSS0 DPTX0 and DPTX1 have been conducted.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/620320/
Link: https://lore.kernel.org/r/20241018070706.28980-6-quic_mukhopad@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INTEL and KVM_AMD are turned off.
ERROR: modpost: "kvm_write_track_remove_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_register_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_unregister_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_write_track_add_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
Change the dependency to CONFIG_KVM_X86 instead.
Fixes: ea4290d77b ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015152157.2955229-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 341e402303)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>