Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When integer scaling is enabled, set taps to 1 and disable adaptive
scaler and sharpener.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add partition config nodes in sysfs to get resource instance details for
a particular partition mode. A resource could be anything like an xcc,
vcn decoder, system dma units etc.
Details of various resource instances are available under
/sys/bus/pci/devices/.../compute_partition_config/
Select a partition configuration:
/sys/bus/pci/devices/.../compute_partition_config/xcp_config
Number of instances of a resource:
/sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_inst
Total partitions sharing the resource:
/sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_shared
v2: Update node name as per spec
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract the resume sequence from sdma_v5_0_gfx_resume for
starting/restarting an individual instance.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct file *f is unused in queue creation, remove it.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes the elida-kd35t133 panel to use multi style functions for
improved error handling.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925080003.1250448-1-tejasvipin76@gmail.com
This reverts commit 8d20a066fa.
It's causing a failure in the abm_gradual igt test.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The only user (the mesa gallium driver) is already assuming explicit
synchronization and doing the export/import dance on shared BOs. The
only reason we were registering ourselves as writers on external BOs
is because Xe, which was the reference back when we developed Panthor,
was doing so. Turns out Xe was wrong, and we really want bookkeep on
all registered fences, so userspace can explicitly upgrade those to
read/write when needed.
Fixes: 4bdca11507 ("drm/panthor: Add the driver frontend block")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905070155.3254011-1-boris.brezillon@collabora.com
If deferred operations are pending, we want to wait for those to
land before declaring the queue blocked on a SYNC_WAIT. We need
this to deal with the case where the sync object is signalled through
a deferred SYNC_{ADD,SET} from the same queue. If we don't do that
and the group gets scheduled out before the deferred SYNC_{SET,ADD}
is executed, we'll end up with a timeout, because no external
SYNC_{SET,ADD} will make the scheduler reconsider the group for
execution.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905071914.3278599-1-boris.brezillon@collabora.com
drm_gpuvm_bo_obtain_prealloc() will call drm_gpuvm_bo_put() on our
pre-allocated BO if the <BO,VM> association exists. Given we
only have one ref on preallocated_vm_bo, drm_gpuvm_bo_destroy() will
be called immediately, and we have to hold the VM resv lock when
calling this function.
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913112722.492144-1-boris.brezillon@collabora.com
Since commit 641bb4394f ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags")
the FMODE_UNSIGNED_OFFSET flag has been moved to fop_flags and renamed,
but the patch failed to make the changes for the panthor driver.
When user space opens the render node the WARN() added by the patch
gets triggered.
Fixes: 641bb4394f ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920102802.2483367-1-liviu.dudau@arm.com
Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The only real reason why we have the gen2 vs. gen3+ split
in irq handling is that bspec claims that IIR/IMR/IER/ISR
and EMR are only 16 bits on gen2, as opposed to being 32
bits on gen3+. That doesn't seem to be a meaningful
distinction as 32bit access to these registers works
perfectly fine on gen2
Interestingly the 16 msbs of IMR are in fact hardcoded
to 1 on gen2, which to me indicates that 32bit access
was the plan all along, and perhaps someone just forgot
to update the spec.
Nuke the special 16bit gen2 irq code and switch over to
the gen3 code.
Gen2 doesn't have the ASLE interrupt, which just needs
a small tweak in i915_irq_postinstall().
And so far we've not had a codepath that could enable the
legacy BLC interrupt on gen2. Now we do, but we'll never
actually do it since gen2 machines don't have OpRegion.
(and neither do i915/i945 machines btw). On these older
platforms the legacy BLC interrupt is meant to be used
in conjunction with the LBPC backlight stuff, but we
never actually switch off the legacy/combination mode
and thus don't use the interrupt either.
This was quickly smoke tested on all gen2 variants.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
For the "always on/unmasked" interrupts we initialize
dev_priv->irq_mask first, then enable_mask. Follow the
same order for the hotplug interrupt so that things are
a bit less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
i915_has_asle() is a bit of a mess. It does some kind of
partial check whether the platform has the legacy BLC
interrupt or not, and then it checks whether OpRegion
ASLE is present.
Let's split the legacy BLC interrupt check into its
own thing, and while at it let's make it accurate.
Currently it misses i85x (not a problem since gen2
never has OpRegion, nor do we currently call
i915_enable_asle_pipestat() on gen2), and it
doesn't reject ILK-M (not that anyone should call
this on ILK). The exlusion of VLV/CHV (where one
might even consider calling this, being gmch
platforms) only happens due to .is_mobile==false.
List the platforms that actually do have the legacy
BLC interrupt in a bit more explicit fashion.
i915gm/i945gm/i965gm/gm45 we can cover with a
display_ver+is_mobile check, pnv needs an exception
due to having a variant with is_mobile==false, and
i85x is the only relevant gen2 platform so easier to
handle on its own.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Abstract away the nuts and bolts of the SPI vs. PCI ROM
stuff, and hide it all in soc/intel_rom.c so that the
VBT code doesn't have to care about this stuff.
This leaves intel_bios.c with a single codepath that
can focus on the details related to the VBT layout.
This should have no functional changes.
v2: Rebase due to vbt_signature changes
Drop unnecessary cast (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-7-ville.syrjala@linux.intel.com
The SPI VBT codepath only knows how to read 4 bytes at a time.
So to read the 2 byte vbt_size it masks out the unwanted msbs.
Hide that little implementation detail inside a new intel_spi_read16()
helper. Alse rename the existing intel_spi_read() to intel_spi_read32()
to make it clear what it does.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-5-ville.syrjala@linux.intel.com
The SPI code rounds the VBT allocation to a multiple of four bytes
(presumably because it reads the VBT 4 bytes at a time). Do the
same for the PCI ROM side to eliminate pointless differences between
the two codepaths. This will make no functional difference.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-4-ville.syrjala@linux.intel.com
Implement required changes for mode validation and compute config,
to support Ultrajoiner.
v2:
-Drop changes for HDMI.
-Separate out DSC changes into another patch.
v3: Fix check in can_ultrajoiner. (Ankit)
v4:
-Unify helper to check joiner requirement. (Ville)
-Split patches for ultrajoiner changes for max dsc slices and compressed
bpp.(Ankit)
v5: Fix check for joiner. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-12-ankit.k.nautiyal@intel.com
When bigjoiner is used, we need at least 2 dsc slices per pipe.
Modify the condition in intel_dp_dsc_get_slice_count() to reflect the
same.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-11-ankit.k.nautiyal@intel.com
Add compressed bpp limitations for ultrajoiner.
v2: Fix the case for 1 pipe. (Ankit)
v3: Refactor existing helper separately and add only ultrajoiner
limitation. (Ville)
v4: Separate out function for ultrajoiner_ram_bits.
v5: Make the helper function more concise. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-10-ankit.k.nautiyal@intel.com
Streamline the helper to get max compressed bpp for bigjoiner case, to
effectively use num of pipes joined. This will make the addition of
ultrajoiner limitations easier and improve redability.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-9-ankit.k.nautiyal@intel.com
Currently compressed max_bpp limitations for small joiner ram, big joiner
etc are intermingled. Seprate these limitations into separate functions.
v2: Use num_joined_pipes in small joiner ram helper and other minor
fixes. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-8-ankit.k.nautiyal@intel.com
Add changes to DSC which are required for Ultrajoiner.
v2:
-Use correct helper for setting bits for bigjoiner secondary. (Ankit)
-Use primary/secondary instead of master/slave. (Suraj)
v3: Add the ultrajoiner helpers and use it for setting ultrajoiner
bits (Ankit)
v4: Use num_vdsc_instances *= num_joined_pipes (Ville)
v5: Align the helper to get ultrajoiner enabled pipes with other helpers
(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-7-ankit.k.nautiyal@intel.com
Ultrajoiner mode has some new bits and states to be
read out from the hw. Lets make changes accordingly.
v2: Fix checkpatch warnings. (Ankit)
v3: Add separate functions for computing expected secondary_big/ultrajoiner
pipes. (Ankit)
v4:
-Streamline the helpers for ultrajoiner. (Ville)
-Add fixup to accommodate PIPED check for ultrajoiner. (Ville)
-Add more Ultrajoiner drm_WARNs. (Ville)
v5: Remove spurious newline. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-6-ankit.k.nautiyal@intel.com
Pass the current pipe into enabled_joiner_pipes(), and let it figure out
the proper bitmasks for us. Since the enabled_joiner_pipes now gets the
primary and secondary pipes wrt a given pipe, the helpers
to get primary pipe and secondary pipes are no longer required.
v2:
-Simplify helper get_joiner_primary_pipes. (Ville)
-Nuke get_joiner_secondary_pipes. (Ville)
-Add more drm_WARNs final primary/secondary pipes. (Ville)
v3: Drop ultrajoiner stuff and add it in subsequent patches. (Ville)
v4:
-Replace input variable name primary_pipes to primary_pipe for
enabled_joiner_pipes()
-Avoid get_joiner_primary_pipe and use primary_pipes set by
enabled_joiner_pipes(). (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-5-ankit.k.nautiyal@intel.com
Add sanity checks for primary and secondary bigjoiner/uncompressed
bitmasks, should make it easier to spot possible issues.
v2:
-Streamline the expected masks and add few more drm_WARNs. (Ville)
-Use %#x format specifier for printing joiner masks. (Ville)
-Use struct intel_display instead of struct drm_i915_private. (Ankit)
v3:
-Rename helper to get expected uncompressed joiner pipes. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-3-ankit.k.nautiyal@intel.com
We need to add a new sanity checks and also do
some preparations for adding ultrajoiner hw state readout.
Lets first split reading of the uncompressed joiner and bigjoiner
bit masks into separate functions.
v2: Fixed checkpatch warnings (Ankit)
v3: Use struct intel_display in the new functions. (Ankit)
v4: Use check for bigjoiner before reading the regs. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-2-ankit.k.nautiyal@intel.com
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND is an int, defaulting to 250. When
the wakeref is non-zero, it's either -1 or a dynamically allocated
pointer, depending on CONFIG_DRM_I915_DEBUG_RUNTIME_PM. It's likely that
the code works by coincidence with the bitwise AND, but with
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y, there's the off chance that the
condition evaluates to false, and intel_wakeref_auto() doesn't get
called. Switch to the intended logical AND.
v2: Use != to avoid clang -Wconstant-logical-operand (Nathan)
Fixes: ad74457a6b ("drm/i915/dgfx: Release mmap on rpm suspend")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org # v6.1+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/643cc0a4d12f47fd8403d42581e83b1e9c4543c7.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 4c1bfe259e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
For intel_wakeref_t, opaque is reasonable, but disguising the underlying
struct ref_tracker * as an unsigned long is not so great. Update the
typedef to remove one level of disguise.
Although the kernel coding style strongly discourages pointer typedefs,
it's a better alternative, and an incremental improvement on the status
quo. It provides much better type safety than an unsigned long could,
and prevents passing magic -1 instead of INTEL_WAKEREF_DEF. Moreover, it
provides a gradual path for replacing intel_wakeref_t with struct
ref_tracker * if desired.
As an extra safety measure, check for error pointers in
intel_ref_tracker_free() before passing them on to ref_tracker_free(),
to catch any mistakes with mock gt special wakeref value.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cca2b0631f816ad90461aa1bf4fe3f80c0e13464.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use explicit casts to convert between intel_wakeref_t and unsigned long,
to not rely on intel_wakeref_t underlying type remaining unsigned long,
allowing us to change it as needed. (And yes, this is indeed preparation
for changing the typedef for intel_wakeref_t.)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d2a2c2399e70f36e0d68d88136ac688f02988fe.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a dedicated macro for the special mock gt wakeref value, with a cast
to intel_wakeref_t, instead of assuming you can assign or compare the
wakeref to -ENODEV directly.
Arguably the whole thing is a hack that should not exist, but at least
make it slightly less hacky.
Side note: If this value were to ever end up in
intel_ref_tracker_free(), it would wreak havoc.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1da887a6b4fe1ec45355571ea7b56d91fadf0af2.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND is an int, defaulting to 250. When
the wakeref is non-zero, it's either -1 or a dynamically allocated
pointer, depending on CONFIG_DRM_I915_DEBUG_RUNTIME_PM. It's likely that
the code works by coincidence with the bitwise AND, but with
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y, there's the off chance that the
condition evaluates to false, and intel_wakeref_auto() doesn't get
called. Switch to the intended logical AND.
v2: Use != to avoid clang -Wconstant-logical-operand (Nathan)
Fixes: ad74457a6b ("drm/i915/dgfx: Release mmap on rpm suspend")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org # v6.1+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/643cc0a4d12f47fd8403d42581e83b1e9c4543c7.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a helper to compute the number of pipes required.
This will depend on whether the joiner is required or is forced through
the debugfs. If no joiner is required the helper returns 1.
v2:
-Return 1 if no joiner is required. (Ville)
-Change the suffix from joined_pipes to num_pipes. (Ville)
-Use number of pipes while calculating joined_pipe masks and
max_dotclk. (Ville)
v3: Simplify and rename the helper to intel_dp_num_joined_pipes(). Ville
v4: Remove redundant 'fallthrough' statement. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-5-ankit.k.nautiyal@intel.com