There is no space between the last word, and the punctuation mark in
English.
Suggested-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-2-jfalempe@redhat.com
Log the address of the register that caused the timeout
interrupt by reading RMTIMEOUTREG_CAPTURE
--v2:
- Update RMTIMEOUTREG_CAPTURE naming (Suraj)
--v3:
- XeLpdp naming convention.
- Use if condition instead of else if
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807142106.1270213-1-mitulkumar.ajitkumar.golani@intel.com
Use a dummy xe_debugfs_register() if debugfs is not enabled and move all
debugfs-related files under `ifeq ($(CONFIG_DEBUG_FS),y)` in the
Makefile. This is similar to what was done for display in
commit 439987f6f4 ("drm/xe: don't build debugfs files when
CONFIG_DEBUG_FS=n").
This removes the following warning while loading xe with
CONFIG_DEUBG_FS=n:
xe 0000:03:00.0: [drm] Create GT directory failed
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808171121.2484237-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The critical section which requires the VM dma-resv is the call
xe_lrc_create in __xe_exec_queue_init. Move this lock to
__xe_exec_queue_init holding it just around xe_lrc_create. Not only is
good practice, this also fixes a locking double of the VM dma-resv in
the error paths of __xe_exec_queue_init as xe_lrc_put tries to acquire
this too resulting in a deadlock.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724152831.1848325-1-matthew.brost@intel.com
ast currently ioremaps two PCI BARs using pcim_iomap(). It does not perform
a request on the regions, however, which would make the driver a bit more
robust.
PCI now offers pcim_iomap_region(), a managed function which both requests
and ioremaps a BAR.
Replace pcim_iomap() with pcim_iomap_region().
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20240807083018.8734-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dave Airlie <airlied@redhat.com>
vboxvideo currently does not reserve its PCI BAR through a region request.
Implement the request through the managed function pcim_request_region().
Link: https://lore.kernel.org/r/20240729093625.17561-5-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
After we detect that mmio is returning all 0xff, we believe that the GPU
has dropped off the pci bus and is dead. Mark the device as wedged such
that we can propagate the failure back to userspace and wait for
recovery.
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807091014.469992-1-andi.shyti@linux.intel.com
When validating VF config on the media GT, we may wrongly report
that VF is already partially configured on it, as we consider GGTT
and LMEM provisioning done on the primary GT (since both GGTT and
LMEM are tile-level resources, not a GT-level).
This will cause skipping a VF auto-provisioning on the media-GT and
in result will block a VF from successfully initialize that GT.
Fix that by considering GGTT and LMEM configurations only when
checking if a VF provisioning is complete, and omit GGTT and LMEM
when reporting empty/partial provisioning.
Fixes: 234670cea9 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806180516.618-1-michal.wajdeczko@intel.com
- Use dma_fence_chain_free in chain fence unused as a sync (Brost)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Take ref to VM in delayed dump snapshot (Brost)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAma1BeoACgkQ+mJfZA7r
E8rgagf9G63U5moSVfNdwPqRLgxV+13QwWkIagHzkSURyGyNA7Vrohn4zZdnPr+w
7NUWuNMhUPFRhz86GLU9/5w0Lssq0sEVn38ll8vEk9hdUm0P1wc94XNrzcc9c6WD
JnM0+PwOSQoBW7OXHP8K+mSNWjaa+36tRwQWDTmKKO+iuyY29k9L6dj5JDd2fi+Q
ssbU1s1jM42rK6Tdxs/yT1fk+pAwAMRVL1ZS0c8gVYRi0QHjt7iOTQF4/TSJhfeN
PUclYMvYsj12me8qZ5UbEVZTlSXxVtCe8DWQTHXe0ESey2J3XjfOfWfQ+KpbFijW
5hgSxGmbwrnFV+fp1hhiaknt59cHAg==
=rwP7
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-08-08' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix off-by-one when processing RTP rules (Lucas)
- Use dma_fence_chain_free in chain fence unused as a sync (Brost)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Take ref to VM in delayed dump snapshot (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZrUGgVrgTJ_vF2PS@intel.com
Mgag200's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as the VGA-BMC connector handles BMC
support internally. Hence, remove the driver's code and the BMC output
entirely.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-6-tzimmermann@suse.de
Move calls to stop and start BMC scanout from CRTC helpers to the
VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC
scanout transparent to the CRTC.
DRM's atomic helpers call an encoder's atomic_disable and atomic_enable
helpers for all enabled encoders. The BMC stops scanning out the VGA
signal if modeset disables the VGA encoder, and starts scanning out
if the modeset enables the VGA encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-5-tzimmermann@suse.de
Control the VIDRST pin from the VGA-BMC encoder's atomic_check and
remove the respective code from CRTC. Makes the VIDRST functionality
fully composable.
The VIDRST pin allows an external clock source to control the SYNC
signals of the Matrox chip. The functionality is part of the CRTC,
but depends on the presence of the clock source. This is the case for
some BMCs, so control the pin from the VGA-BMC output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-4-tzimmermann@suse.de
The VGA-BMC connector selects the VGA output if a display has been
attached to the physical connector. Otherwise it selects the BMC
output. In any case, the connector status is set to 'detected', so
that the userspace compositor displays to it.
Depending on the setting, the connector's display modes either come
from the VGA monitor's EDID or from an internal list of BMC-compatible
modes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-3-tzimmermann@suse.de
Duplicate VGA output to VGA-BMC output and update all code for Matrox
server chips. The new output represents a VGA output that has a BMC
attached to it. No functional changes so far.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-2-tzimmermann@suse.de
double-free in drm/bridge-connector, a fix for a gem shmem test, and a
fix for async flips updates.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZrR4RQAKCRDj7w1vZxhR
xTLiAQCfCIlzUPymdKxpAyme7IWH7dlxFvl5RsfGgOTgNVYzSgEAtg8gPSwaCbny
V2i1kZ9iuVZLK7E7stH4iv6w4aN1FgE=
=eJIv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-08-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A fix for drm/client to prevent a null pointer dereference, a fix for a
double-free in drm/bridge-connector, a fix for a gem shmem test, and a
fix for async flips updates.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808-debonair-smoky-mustang-8b6b3f@houat
This WA is applied while initializing the media GT, but it a primary
GT WA (because it modifies a register on the primary GT), so the XE_WA
macro is returning false even when the WA should be applied.
Fix this by using the primary GT in the macro.
Note that this WA only applies to PXP and we don't yet support that in
Xe, so there are no negative effects to this bug, which is why we didn't
see any errors in testing.
v2: use the primary GT in the macro instead of marking the WA as
platform-wide (Lucas, Matt).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807235333.1370915-1-daniele.ceraolospurio@intel.com
Enable workarounds for HW bug where render engine reset fails. Given
that we're bumping the minimum required GuC version to 70.29, we're
guaranteed to always have support for this KLV in the GuC.
v2: Enable KLV correctly for either workaround (Lucas)
v4: Add check for minimum supported GuC firmware version. Enable w/a for
hw version 20.01 too. (Daniele)
v5 (Daniele): remove now unneeded fw type and version checks (JohnH)
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805205435.921921-1-daniele.ceraolospurio@intel.com
Kernel BO's don't take a ref to the VM, we need the VM for the
delayed snapshot, so take a ref to the VM in delayed snapshot.
v2:
- Check for lrc_bo before taking a VM ref (CI)
- Check lrc_bo->vm before taking / dropping a VM ref (CI)
- Drop VM in xe_lrc_snapshot_free
v5:
- Fix commit message wording (Johnathan)
Fixes: 47058633d9 ("drm/xe: Move lrc snapshot capturing to xe_lrc.c")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-2-matthew.brost@intel.com
(cherry picked from commit c3bc97d2f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In xe_hwmon_power_max_write, for PL1 disable supported case, instead of
returning after PL1 disable, PL1 enable path was also being run.
Fixed it by returning after disable.
v2: Correct typo and grammar in commit message. (Jonathan)
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: fef6dd12b4 ("drm/xe/hwmon: Protect hwmon rw attributes with hwmon_lock")
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801112424.1841766-1-karthik.poosa@intel.com
(cherry picked from commit 146458645e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Gustavo noticed an odd "+ 2" in rtp_mark_active() while processing
rtp rules and pointed that it should be "+ 1". In fact, while processing
entries without actions (OOB workarounds), if the WA is activated and
has OR rules, it will also inadvertently activate the very next
workaround.
Test in a LNL B0 platform by moving 18024947630 on top of 16020292621,
makes the latter become active:
$ cat /sys/kernel/debug/dri/0/gt0/workarounds
...
OOB Workarounds
18024947630
16020292621
14018094691
16022287689
13011645652
22019338487_display
In future a kunit test will be added to cover the rtp checks for entries
without actions.
Fixes: fe19328b90 ("drm/xe/rtp: Add support for entries with no action")
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726064337.797576-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit fd6797ec50)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With the previous cleanups, the last remaining user of __i915_printk()
is i915_probe_error(). Switch that to use drm_dbg() and drm_err()
instead, dropping the request to report bugs in the few remaining
specific cases.
It's not common for drivers to log bug filing requests to begin with,
but these cases are in init, which is most likely to be tested in CI and
least likely to be hit by end users anyway.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be9baeab281f75999e96cc7ad1c06c6680494bc1.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915_report_error() presently acts as a wrapper for __i915_printk(). In
practice, it would be better to use drm level error reporting wherever
possible, so replace all uses of i915_report_error() with the equivalent
drm_err() call. These cases are not worth having a dedicated wrapper to
also print bug reporting info. Replacing the calls leaves
i915_report_error() with no users, so remove it.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19eab020c57c0fa45acacf4e4a8077e57cd4d561.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
By moving the pfn calculation to the set_address_limits()
function we improve code readability. This way,
set_address_limits() is responsible for calculating all memory
mapping paramenters: "start", "end" and "pfn".
This suggestion from Jonathan was made during the review of
commit 8bdd9ef7e9 ("drm/i915/gem: Fix Virtual Memory mapping
boundaries calculation"), which I liked, but it got lost on the
way.
Suggested-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807104553.481763-1-andi.shyti@linux.intel.com
Building with Sparse enabled prints this warning for cpu_to_le16()
calls:
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype]
got restricted __le16 [usertype]
And this warning for le16_to_cpu() calls:
warning: cast to restricted __le16
Declare the target buffer as __le16 to fix both warnings.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716161725.41408-2-jose.exposito89@gmail.com
We require this flag AMDGPU_GEM_CREATE_GFX12_DCC or any other
kernel level GFX12 DCC flag to differentiate the DCC buffers and other
pinned display buffers(which has TTM_PL_FLAG_CONTIGUOUS enabled).
If we use the TTM_PL_FLAG_CONTIGUOUS flag for DCC buffers, we may over
allocate for all the pinned display buffers unnecessarily that leads to
memory allocation failure.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 46142cc1b9)
correct sdma7 max dw into 8
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 86598c3819)
Add address alignment support to the DCC VRAM buffers.
v2:
- adjust size based on the max_texture_channel_caches values
only for GFX12 DCC buffers.
- used AMDGPU_GEM_CREATE_GFX12_DCC flag to apply change only
for DCC buffers.
- roundup non power of two DCC buffer adjusted size to nearest
power of two number as the buddy allocator does not support non
power of two alignments. This applies only to the contiguous
DCC buffers.
v3:(Alex)
- rewrite the max texture channel caches comparison code in an
algorithmic way to determine the alignment size.
v4:(Alex)
- Move the logic from amdgpu_vram_mgr_dcc_alignment() to gmc_v12_0.c
and add a new gmc func callback for dcc alignment. If the callback
is non-NULL, call it to get the alignment, otherwise, use the default.
v5:(Alex)
- Set the Alignment to a default value if the callback doesn't exist.
- Add the callback to amdgpu_gmc_funcs.
v6:
- Fix checkpatch warning reported by Intel CI.
v7:(Christian)
- remove the AMDGPU_GEM_CREATE_GFX12_DCC flag and keep a flag that
checks the BO pinning and for a specific hw generation.
v8:(Christian)
- move this check into gmc_v12_0_get_dcc_alignment.
v9:
- Fix 32bit build errors
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aa94b623cb)
Without setting cpv bit and 7th ib dw, non-dcc buffer copy will have
random corruption
So set the cpv bit and clear the 7th ib dw for copy non-dcc buffers
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5aacf8917f)
As we discussed before[1], soft recovery should be
forwarded to userspace, or we can get into a really
bad state where apps will keep submitting hanging
command buffers cascading us to a hard reset.
1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 434967aadb)
Cc: stable@vger.kernel.org
- Add a new start parameter in trim function to specify exact
address from where to start the trimming. This would help us
in situations like if drivers would like to do address alignment
for specific requirements.
- Add a new flag DRM_BUDDY_TRIM_DISABLE. Drivers can use this
flag to disable the allocator trimming part. This patch enables
the drivers control trimming and they can do it themselves
based on the application requirements.
v1:(Matthew)
- check new_start alignment with min chunk_size
- use range_overflows()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db65eb46de)
Add a callback that program the DET segment when initializing pipes.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e1dbe625d6)
Include display_mode_vba_314 and display_rq_dlg_calc_314 to the dml
Makefile.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 089525632d)
MMHUB v4.1.0 only support fixed cache mode, so
only use legacy invalidation accordingly.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9192c7613c)
update powerplay structure on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f905d0c328)