Commit graph

126,670 commits

Author SHA1 Message Date
Jonathan Kim
e06b71b231 drm/amdkfd: allow users to target recommended SDMA engines
Certain GPUs have better copy performance over xGMI on specific
SDMA engines depending on the source and destination GPU.
Allow users to create SDMA queues on these recommended engines.
Close to 2x overall performance has been observed with this
optimization.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:43:41 -04:00
Kenneth Feng
60c30ba7ba drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
support gpu_metrics sysfs interface for smu v14.0.2/3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:43:27 -04:00
Jiapeng Chong
f3c681f0c3 drm/amd/display: use swap() in sort()
Use existing swap() function rather than duplicating its implementation.

./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn3.c:17:29-30: WARNING opportunity for swap().

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9573
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:43:23 -04:00
Nathan Chancellor
fdedd77b0e drm/amd/display: Reapply 2fde4fdddc
Commit 2563391e57 ("drm/amd/display: DML2.1 resynchronization") blew
away the compiler warning fix from commit 2fde4fdddc
("drm/amd/display: Avoid -Wenum-float-conversion in
add_margin_and_round_to_dfs_grainularity()"), causing the warning to
reappear.

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
    183 |         divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
        |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

Apply the fix again to resolve the warning.

Fixes: 2563391e57 ("drm/amd/display: DML2.1 resynchronization")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:42:20 -04:00
Colin Ian King
75c3f06fd9 drm/amd/display: Fix spelling mistake "tolarance" -> "tolerance"
There is a spelling mistake in a dml2_printf message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:42:14 -04:00
Alex Deucher
17c6baff3d drm/radeon: properly handle vbios fake edid sizing
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128

This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.

Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: c324acd503 ("drm/radeon/kms: parse the extended LCD info block")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:41:58 -04:00
Alex Deucher
8155566a26 drm/amdgpu: properly handle vbios fake edid sizing
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128

This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.

Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25 17:41:46 -04:00
Dave Airlie
a37cd98cd5 Merge tag 'drm-intel-next-fixes-2024-07-25' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Do not consider preemption during execlists_dequeue for gen8 [gt] (Nitin Gote)
- Allow NULL memory region (Jonathan Cavitt)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZqICQzyzm/6hDWy4@linux
2024-07-26 06:41:03 +10:00
Daniele Ceraolo Spurio
351a88713b drm/xe/huc: Define HuC binary for BMG
Add the unversioned define for the BMG HuC FW.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725003224.516233-7-daniele.ceraolospurio@intel.com
2024-07-25 12:40:49 -07:00
Daniele Ceraolo Spurio
f4aa02c439 drm/xe/gsc: Define GSC binary for LNL
As with previous binaries, we match the compatibility version instead of
the build number.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725003224.516233-6-daniele.ceraolospurio@intel.com
2024-07-25 12:40:42 -07:00
Daniele Ceraolo Spurio
e814902866 drm/xe/huc: Define HuC binary for LNL
Add the unversioned define for the LNL HuC FW.

All new binaries are GSC-enabled (and even if they weren't the driver
can detect the type of HuC binary), so the new lnl HuC filename doesn't
use the _gsc postfix to avoid confusion with the GSC binary.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725003224.516233-5-daniele.ceraolospurio@intel.com
2024-07-25 12:39:22 -07:00
Linus Torvalds
c2a96b7f18 Driver core changes for 6.11-rc1
Here is the big set of driver core changes for 6.11-rc1.
 
 Lots of stuff in here, with not a huge diffstat, but apis are evolving
 which required lots of files to be touched.  Highlights of the changes
 in here are:
   - platform remove callback api final fixups (Uwe took many releases to
     get here, finally!)
   - Rust bindings for basic firmware apis and initial driver-core
     interactions.  It's not all that useful for a "write a whole driver
     in rust" type of thing, but the firmware bindings do help out the
     phy rust drivers, and the driver core bindings give a solid base on
     which others can start their work.  There is still a long way to go
     here before we have a multitude of rust drivers being added, but
     it's a great first step.
   - driver core const api changes.  This reached across all bus types,
     and there are some fix-ups for some not-common bus types that
     linux-next and 0-day testing shook out.  This work is being done to
     help make the rust bindings more safe, as well as the C code, moving
     toward the end-goal of allowing us to put driver structures into
     read-only memory.  We aren't there yet, but are getting closer.
   - minor devres cleanups and fixes found by code inspection
   - arch_topology minor changes
   - other minor driver core cleanups
 
 All of these have been in linux-next for a very long time with no
 reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
 cJEYtJpGtWX6aAtugm9E
 =ZyJV
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big set of driver core changes for 6.11-rc1.

  Lots of stuff in here, with not a huge diffstat, but apis are evolving
  which required lots of files to be touched. Highlights of the changes
  in here are:

   - platform remove callback api final fixups (Uwe took many releases
     to get here, finally!)

   - Rust bindings for basic firmware apis and initial driver-core
     interactions.

     It's not all that useful for a "write a whole driver in rust" type
     of thing, but the firmware bindings do help out the phy rust
     drivers, and the driver core bindings give a solid base on which
     others can start their work.

     There is still a long way to go here before we have a multitude of
     rust drivers being added, but it's a great first step.

   - driver core const api changes.

     This reached across all bus types, and there are some fix-ups for
     some not-common bus types that linux-next and 0-day testing shook
     out.

     This work is being done to help make the rust bindings more safe,
     as well as the C code, moving toward the end-goal of allowing us to
     put driver structures into read-only memory. We aren't there yet,
     but are getting closer.

   - minor devres cleanups and fixes found by code inspection

   - arch_topology minor changes

   - other minor driver core cleanups

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  ARM: sa1100: make match function take a const pointer
  sysfs/cpu: Make crash_hotplug attribute world-readable
  dio: Have dio_bus_match() callback take a const *
  zorro: make match function take a const pointer
  driver core: module: make module_[add|remove]_driver take a const *
  driver core: make driver_find_device() take a const *
  driver core: make driver_[create|remove]_file take a const *
  firmware_loader: fix soundness issue in `request_internal`
  firmware_loader: annotate doctests as `no_run`
  devres: Correct code style for functions that return a pointer type
  devres: Initialize an uninitialized struct member
  devres: Fix memory leakage caused by driver API devm_free_percpu()
  devres: Fix devm_krealloc() wasting memory
  driver core: platform: Switch to use kmemdup_array()
  driver core: have match() callback in struct bus_type take a const *
  MAINTAINERS: add Rust device abstractions to DRIVER CORE
  device: rust: improve safety comments
  MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
  MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
  firmware: rust: improve safety comments
  ...
2024-07-25 10:42:22 -07:00
Cong Yang
d969b31afa drm/panel: nt36672e: Break some CMDS into helper functions
Break select page cmds and reload cmds into helper functions.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com
2024-07-25 16:27:22 +02:00
Cong Yang
3c8d2d5da3 drm/panel: nt35521: Break some CMDS into helper functions
Break select page cmds into helper functions.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240710084715.1119935-3-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-3-yangcong5@huaqin.corp-partner.google.com
2024-07-25 16:27:22 +02:00
Cong Yang
93183c9959 drm/panel: boe-tv101wum-nl6: Break some CMDS into helper functions
hj110iz-01a and tv110c9m-ll3 both nt36523 controller, and they have
some common cmds, so let's break them into helper functions.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240710084715.1119935-2-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-2-yangcong5@huaqin.corp-partner.google.com
2024-07-25 16:27:21 +02:00
Marco Pagani
773884e39b drm/test: use kunit action wrapper macro in the gem shmem test suite
Replace deferred action function wrappers with equivalent ones defined
using the macro introduced by commit 56778b49c9 ("kunit: Add a macro to
wrap a deferred action function")

Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723191036.131286-1-marpagan@redhat.com
2024-07-25 14:38:09 +02:00
Christian König
83b501c179 drm/scheduler: remove full_recover from drm_sched_start
This was basically just another one of amdgpus hacks. The parameter
allowed to restart the scheduler without turning fence signaling on
again.

That this is absolutely not a good idea should be obvious by now since
the fences will then just sit there and never signal.

While at it cleanup the code a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722083816.99685-1-christian.koenig@amd.com
2024-07-25 14:05:12 +02:00
Pin-yen Lin
10ba375366
drm/bridge: it6505: Disable IRQ when powered off
When the bridge is powered off, disable the IRQ until the next power on
to workaround an interrupt storm on some badly-designed hardware.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719110623.1850021-1-treapking@chromium.org
2024-07-25 12:13:22 +02:00
Suraj Kandpal
3e307d6c28 drm/i915/dp: Clear VSC SDP during post ddi disable routine
Clear VSC SDP if intel_dp_set_infoframes is called from post ddi disable
routine i.e with the variable of enable as false. This is to avoid
an infoframes.enable mismatch issue which is caused when pipe is
connected to eDp which has psr then connected to DPMST. In this case
eDp's post ddi disable routine does not clear infoframes.enable VSC
for the given pipe and DPMST does not recompute VSC SDP and write
infoframes.enable which causes a mismatch.

--v2
-Make the comment match the code [Jani]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724163743.3668407-1-suraj.kandpal@intel.com
2024-07-25 15:11:23 +05:30
Suraj Kandpal
b4224f6bae drm/xe/hdcp: Check GSC structure validity
Sometimes xe_gsc is not initialized when checked at HDCP capability
check. Add gsc structure check to avoid null pointer error.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722064451.3610512-4-suraj.kandpal@intel.com
2024-07-25 08:55:26 +05:30
Suraj Kandpal
d34f4f058e drm/i915/hdcp: Add encoder check in hdcp2_get_capability
Add encoder check in intel_hdcp2_get_capability to avoid
null pointer error.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722064451.3610512-3-suraj.kandpal@intel.com
2024-07-25 08:55:24 +05:30
Suraj Kandpal
31b42af516 drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability
Sometimes during hotplug scenario or suspend/resume scenario encoder is
not always initialized when intel_hdcp_get_capability add
a check to avoid kernel null pointer dereference.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722064451.3610512-2-suraj.kandpal@intel.com
2024-07-25 08:55:21 +05:30
Ian Forbes
cb372a505a drm/vmwgfx: Fix overlay when using Screen Targets
This code was never updated to support Screen Targets.
Fixes a bug where Xv playback displays a green screen instead of actual
video contents when 3D acceleration is disabled in the guest.

Fixes: c8261a961e ("vmwgfx: Major KMS refactoring / cleanup in preparation of screen targets")
Reported-by: Doug Brown <doug@schmorgal.com>
Closes: https://lore.kernel.org/all/bd9cb3c7-90e8-435d-bc28-0e38fee58977@schmorgal.com
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Tested-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719163627.20888-1-ian.forbes@broadcom.com
2024-07-24 22:29:07 -04:00
Zack Rusin
12bed149a3 drm/vmwgfx: Add basic support for external buffers
Make vmwgfx go through the dma-buf interface to map/unmap imported
buffers. The driver used to try to directly manipulate external
buffers, assuming that everything that was coming to it had to live
in cpu accessible memory. While technically true because what's in the
vms is controlled by us, it's semantically completely broken.

Fix importing of external buffers by forwarding all memory access
requests to the importer.

Tested by the vmw_prime basic_vgem test.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-5-zack.rusin@broadcom.com
2024-07-24 22:21:53 -04:00
Zack Rusin
d6667f0ddf drm/vmwgfx: Fix handling of dumb buffers
Dumb buffers can be used in kms but also through prime with gallium's
resource_from_handle. In the second case the dumb buffers can be
rendered by the GPU where with the regular DRM kms interfaces they
are mapped and written to by the CPU. Because the same buffer can
be written to by the GPU and CPU vmwgfx needs to use vmw_surface (object
which properly tracks dirty state of the guest and gpu memory)
instead of vmw_bo (which is just guest side memory).

Furthermore the dumb buffer handles are expected to be gem objects by
a lot of userspace.

Make vmwgfx accept gem handles in prime and kms but internally switch
to vmw_surface's to properly track the dirty state of the objects between
the GPU and CPU.

Fixes new kwin and kde on wayland.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: b32233acce ("drm/vmwgfx: Fix prime import/export")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-4-zack.rusin@broadcom.com
2024-07-24 22:21:53 -04:00
Zack Rusin
09f34a0027 drm/vmwgfx: Make sure the screen surface is ref counted
Fix races issues in virtual crc generation by making sure the surface
the code uses for crc computation is properly ref counted.

Crc generation was trying to be too clever by allowing the surfaces
to go in and out of scope, with the hope of always having some kind
of screen present. That's not always the code, in particular during
atomic disable, so to make sure the surface, when present, is not
being actively destroyed at the same time, hold a reference to it.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 7b0062036c ("drm/vmwgfx: Implement virtual crc generation")
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-3-zack.rusin@broadcom.com
2024-07-24 22:21:52 -04:00
Zack Rusin
e583371007 drm/vmwgfx: Fix a deadlock in dma buf fence polling
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.

vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.

dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.

Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 2298e804e9 ("drm/vmwgfx: rework to new fence interface, v2")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-2-zack.rusin@broadcom.com
2024-07-24 22:21:36 -04:00
ZhenGuo Yin
5659b0c93a drm/amdgpu: reset vm state machine after gpu reset(vram lost)
[Why]
Page table of compute VM in the VRAM will lost after gpu reset.
VRAM won't be restored since compute VM has no shadows.

[How]
Use higher 32-bit of vm->generation to record a vram_lost_counter.
Reset the VM state machine when vm->genertaion is not equal to
the new generation token.

v2: Check vm->generation instead of calling drm_sched_entity_error
in amdgpu_vm_validate.
v3: Use new generation token instead of vram_lost_counter for check.

Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 47c0388b05)
2024-07-24 17:30:49 -04:00
Tim Huang
fab1ead0ae drm/amdgpu: add missed harvest check for VCN IP v4/v5
To prevent below probe failure, add a check for models with VCN
IP v4.0.6 where VCN1 may be harvested.

v2:
Apply the same check to VCN IP v4.0 and v5.0.

[   54.070117] RIP: 0010:vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu]
[   54.071055] Code: 80 fb ff 8d 82 00 80 fe ff 81 fe 00 06 00 00 0f 43
c2 49 69 d5 38 0d 00 00 48 8d 71 04 c1 e8 02 4c 01 f2 48 89 b2 50 f6 02
00 <89> 01 48 8b 82 50 f6 02 00 48 8d 48 04 48 89 8a 50 f6 02 00 c7 00
[   54.072408] RSP: 0018:ffffb17985f736f8 EFLAGS: 00010286
[   54.072793] RAX: 00000000000000d6 RBX: ffff99a82f680000 RCX:
0000000000000000
[   54.073315] RDX: ffff99a82f680000 RSI: 0000000000000004 RDI:
ffff99a82f680000
[   54.073835] RBP: ffffb17985f73730 R08: 0000000000000001 R09:
0000000000000000
[   54.074353] R10: 0000000000000008 R11: ffffb17983c05000 R12:
0000000000000000
[   54.074879] R13: 0000000000000000 R14: ffff99a82f680000 R15:
0000000000000001
[   54.075400] FS:  00007f8d9c79a000(0000) GS:ffff99ab2f140000(0000)
knlGS:0000000000000000
[   54.075988] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   54.076408] CR2: 0000000000000000 CR3: 0000000140c3a000 CR4:
0000000000750ef0
[   54.076927] PKRU: 55555554
[   54.077132] Call Trace:
[   54.077319]  <TASK>
[   54.077484]  ? show_regs+0x69/0x80
[   54.077747]  ? __die+0x28/0x70
[   54.077979]  ? page_fault_oops+0x180/0x4b0
[   54.078286]  ? do_user_addr_fault+0x2d2/0x680
[   54.078610]  ? exc_page_fault+0x84/0x190
[   54.078910]  ? asm_exc_page_fault+0x2b/0x30
[   54.079224]  ? vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu]
[   54.079941]  ? vcn_v4_0_5_start_dpg_mode+0xe6/0x36b0 [amdgpu]
[   54.080617]  vcn_v4_0_5_set_powergating_state+0x82/0x19b0 [amdgpu]
[   54.081316]  amdgpu_device_ip_set_powergating_state+0x64/0xc0
[amdgpu]
[   54.082057]  amdgpu_vcn_ring_begin_use+0x6f/0x1d0 [amdgpu]
[   54.082727]  amdgpu_ring_alloc+0x44/0x70 [amdgpu]
[   54.083351]  amdgpu_vcn_dec_sw_ring_test_ring+0x40/0x110 [amdgpu]
[   54.084054]  amdgpu_ring_test_helper+0x22/0x90 [amdgpu]
[   54.084698]  vcn_v4_0_5_hw_init+0x87/0xc0 [amdgpu]
[   54.085307]  amdgpu_device_init+0x1f96/0x2780 [amdgpu]
[   54.085951]  amdgpu_driver_load_kms+0x1e/0xc0 [amdgpu]
[   54.086591]  amdgpu_pci_probe+0x19f/0x550 [amdgpu]
[   54.087215]  local_pci_probe+0x48/0xa0
[   54.087509]  pci_device_probe+0xc9/0x250
[   54.087812]  really_probe+0x1a4/0x3f0
[   54.088101]  __driver_probe_device+0x7d/0x170
[   54.088443]  driver_probe_device+0x24/0xa0
[   54.088765]  __driver_attach+0xdd/0x1d0
[   54.089068]  ? __pfx___driver_attach+0x10/0x10
[   54.089417]  bus_for_each_dev+0x8e/0xe0
[   54.089718]  driver_attach+0x22/0x30
[   54.090000]  bus_add_driver+0x120/0x220
[   54.090303]  driver_register+0x62/0x120
[   54.090606]  ? __pfx_amdgpu_init+0x10/0x10 [amdgpu]
[   54.091255]  __pci_register_driver+0x62/0x70
[   54.091593]  amdgpu_init+0x67/0xff0 [amdgpu]
[   54.092190]  do_one_initcall+0x5f/0x330
[   54.092495]  do_init_module+0x68/0x240
[   54.092794]  load_module+0x201c/0x2110
[   54.093093]  init_module_from_file+0x97/0xd0
[   54.093428]  ? init_module_from_file+0x97/0xd0
[   54.093777]  idempotent_init_module+0x11c/0x2a0
[   54.094134]  __x64_sys_finit_module+0x64/0xc0
[   54.094476]  do_syscall_64+0x58/0x120
[   54.094767]  entry_SYSCALL_64_after_hwframe+0x6e/0x76

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 0b071245dd)
2024-07-24 17:30:23 -04:00
Stanley.Yang
1a8825259a drm/amdgpu: Fix eeprom max record count
The eeprom table is empty before initializing,
set eeprom table version first before initializing.

Changed from V1:
	Reuse amdgpu_ras_set_eeprom_table_version function

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 015b8a2fdf)
2024-07-24 17:30:23 -04:00
YiPeng Chai
afac8c6554 drm/amdgpu: fix ras UE error injection failure issue
The ras command shared memory is allocated from
VRAM and the response status of the command
buffer will not be zero due to gpu being in
fatal error state after ras UE error injection.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8284951a6e)
2024-07-24 17:30:23 -04:00
Rodrigo Siqueira
5302d1a06a drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 332315885d)
2024-07-24 17:30:23 -04:00
Sung Joon Kim
4ab68e168a drm/amd/display: Check for NULL pointer
[why & how]
Need to make sure plane_state is initialized
before accessing its members.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 295d91cbc7)
2024-07-24 17:30:23 -04:00
Jane Jian
6728f55590 drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
For VCN/JPEG 4.0.3, use only the local addressing scheme.

- Mask bit higher than AID0 range

v2
remain the case for mmhub use master XCC

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit caaf576292)
2024-07-24 17:30:23 -04:00
Lijo Lazar
485432d090 drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
VCN 4.0.3 does not HDP flush with RRMT enabled. Instead, mmsch
will do the HDP flush.

This change is necessary for VCN v4.0.3, no need for backward compatibility

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49cfaebe48)
2024-07-24 17:30:23 -04:00
Lijo Lazar
23df34997d drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
JPEG v4.0.3 doesn't support HDP flush when RRMT is enabled. Instead,
mmsch fw will do the flush.

This change is necessary for JPEG v4.0.3, no need for backward compatibility

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 585e3fdb36)
2024-07-24 17:30:23 -04:00
Ma Ke
df65aabef3 drm/amd/amdgpu: Fix uninitialized variable warnings
Return 0 to avoid returning an uninitialized variable r.

Cc: stable@vger.kernel.org
Fixes: 230dd6bb61 ("drm/amd/amdgpu: implement mode2 reset on smu_v13_0_10")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6472de66c0)
2024-07-24 17:30:23 -04:00
David Belanger
73048bda46 drm/amdgpu: Fix atomics on GFX12
If PCIe supports atomics, configure register to prevent DF from
breaking atomics in separate load/store operations.

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 666f14cab2)
2024-07-24 17:30:23 -04:00
Alex Deucher
a03ebf1163 drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
We seem to have a case where SDMA will sometimes miss a doorbell
if GFX is entering the powergating state when the doorbell comes in.
To workaround this, we can update the wptr via MMIO, however,
this is only safe because we disallow gfxoff in begin_ring() for
SDMA 5.2 and then allow it again in end_ring().

Enable this workaround while we are root causing the issue with
the HW team.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/3440
Tested-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit f2ac526349)
2024-07-24 17:29:57 -04:00
Matthew Brost
1a394b4f50 drm/xe: Fix possible UAF in guc_exec_queue_process_msg
Store xe_device ahead of processing message as message can be free'd in
some cases.

v2:
 - Including missing local changes
v3:
 - Resend for CI

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202407231445.rpisd1vA-lkp@intel.com/
Fixes: d930c19fdf ("drm/xe: Build PM into GuC CT layer")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724164341.1848954-1-matthew.brost@intel.com
2024-07-24 13:41:01 -07:00
Philip Yang
629568d25f drm/amdkfd: Validate queue cwsr area and eop buffer size
When creating KFD user compute queue, check if queue eop buffer size,
cwsr area size, ctl stack size equal to the size of KFD node
properities.

Check the entire cwsr area which may split into multiple svm ranges
aligned to granularity boundary.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:46:06 -04:00
Philip Yang
517fff221c drm/amdkfd: Store queue cwsr area size to node properties
Use the queue eop buffer size, cwsr area size, ctl stack size
calculation from Thunk, store the value to KFD node properties.

Those will be used to validate queue eop buffer size, cwsr area size,
ctl stack size when creating KFD user compute queue.

Those will be exposed to user space via sysfs KFD node properties, to
remove the duplicate calculation code from Thunk.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:45:58 -04:00
ZhenGuo Yin
47c0388b05 drm/amdgpu: reset vm state machine after gpu reset(vram lost)
[Why]
Page table of compute VM in the VRAM will lost after gpu reset.
VRAM won't be restored since compute VM has no shadows.

[How]
Use higher 32-bit of vm->generation to record a vram_lost_counter.
Reset the VM state machine when vm->genertaion is not equal to
the new generation token.

v2: Check vm->generation instead of calling drm_sched_entity_error
in amdgpu_vm_validate.
v3: Use new generation token instead of vram_lost_counter for check.

Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:45:24 -04:00
Srinivasan Shanmugam
08ae395ea2 drm/amd/display: Add null check for set_output_gamma in dcn30_set_output_transfer_func
This commit adds a null check for the set_output_gamma function pointer
in the  dcn30_set_output_transfer_func function. Previously,
set_output_gamma was being checked for nullity at line 386, but then it
was being dereferenced without any nullity check at line 401. This
could potentially lead to a null pointer dereference error if
set_output_gamma is indeed null.

To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a nullity check for
set_output_gamma before the call to set_output_gamma at line 401. If
set_output_gamma is null, we log an error message and do not call the
function.

This fix prevents a potential null pointer dereference error.

drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func()
error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386)

drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c
    373 bool dcn30_set_output_transfer_func(struct dc *dc,
    374                                 struct pipe_ctx *pipe_ctx,
    375                                 const struct dc_stream_state *stream)
    376 {
    377         int mpcc_id = pipe_ctx->plane_res.hubp->inst;
    378         struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc;
    379         const struct pwl_params *params = NULL;
    380         bool ret = false;
    381
    382         /* program OGAM or 3DLUT only for the top pipe*/
    383         if (pipe_ctx->top_pipe == NULL) {
    384                 /*program rmu shaper and 3dlut in MPC*/
    385                 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream);
    386                 if (ret == false && mpc->funcs->set_output_gamma) {
                                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL

    387                         if (stream->out_transfer_func.type == TF_TYPE_HWPWL)
    388                                 params = &stream->out_transfer_func.pwl;
    389                         else if (pipe_ctx->stream->out_transfer_func.type ==
    390                                         TF_TYPE_DISTRIBUTED_POINTS &&
    391                                         cm3_helper_translate_curve_to_hw_format(
    392                                         &stream->out_transfer_func,
    393                                         &mpc->blender_params, false))
    394                                 params = &mpc->blender_params;
    395                          /* there are no ROM LUTs in OUTGAM */
    396                         if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED)
    397                                 BREAK_TO_DEBUGGER();
    398                 }
    399         }
    400
--> 401         mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash

    402         return ret;
    403 }

Fixes: d99f13878d ("drm/amd/display: Add DCN3 HWSEQ")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:44:16 -04:00
Tim Huang
0b071245dd drm/amdgpu: add missed harvest check for VCN IP v4/v5
To prevent below probe failure, add a check for models with VCN
IP v4.0.6 where VCN1 may be harvested.

v2:
Apply the same check to VCN IP v4.0 and v5.0.

[   54.070117] RIP: 0010:vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu]
[   54.071055] Code: 80 fb ff 8d 82 00 80 fe ff 81 fe 00 06 00 00 0f 43
c2 49 69 d5 38 0d 00 00 48 8d 71 04 c1 e8 02 4c 01 f2 48 89 b2 50 f6 02
00 <89> 01 48 8b 82 50 f6 02 00 48 8d 48 04 48 89 8a 50 f6 02 00 c7 00
[   54.072408] RSP: 0018:ffffb17985f736f8 EFLAGS: 00010286
[   54.072793] RAX: 00000000000000d6 RBX: ffff99a82f680000 RCX:
0000000000000000
[   54.073315] RDX: ffff99a82f680000 RSI: 0000000000000004 RDI:
ffff99a82f680000
[   54.073835] RBP: ffffb17985f73730 R08: 0000000000000001 R09:
0000000000000000
[   54.074353] R10: 0000000000000008 R11: ffffb17983c05000 R12:
0000000000000000
[   54.074879] R13: 0000000000000000 R14: ffff99a82f680000 R15:
0000000000000001
[   54.075400] FS:  00007f8d9c79a000(0000) GS:ffff99ab2f140000(0000)
knlGS:0000000000000000
[   54.075988] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   54.076408] CR2: 0000000000000000 CR3: 0000000140c3a000 CR4:
0000000000750ef0
[   54.076927] PKRU: 55555554
[   54.077132] Call Trace:
[   54.077319]  <TASK>
[   54.077484]  ? show_regs+0x69/0x80
[   54.077747]  ? __die+0x28/0x70
[   54.077979]  ? page_fault_oops+0x180/0x4b0
[   54.078286]  ? do_user_addr_fault+0x2d2/0x680
[   54.078610]  ? exc_page_fault+0x84/0x190
[   54.078910]  ? asm_exc_page_fault+0x2b/0x30
[   54.079224]  ? vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu]
[   54.079941]  ? vcn_v4_0_5_start_dpg_mode+0xe6/0x36b0 [amdgpu]
[   54.080617]  vcn_v4_0_5_set_powergating_state+0x82/0x19b0 [amdgpu]
[   54.081316]  amdgpu_device_ip_set_powergating_state+0x64/0xc0
[amdgpu]
[   54.082057]  amdgpu_vcn_ring_begin_use+0x6f/0x1d0 [amdgpu]
[   54.082727]  amdgpu_ring_alloc+0x44/0x70 [amdgpu]
[   54.083351]  amdgpu_vcn_dec_sw_ring_test_ring+0x40/0x110 [amdgpu]
[   54.084054]  amdgpu_ring_test_helper+0x22/0x90 [amdgpu]
[   54.084698]  vcn_v4_0_5_hw_init+0x87/0xc0 [amdgpu]
[   54.085307]  amdgpu_device_init+0x1f96/0x2780 [amdgpu]
[   54.085951]  amdgpu_driver_load_kms+0x1e/0xc0 [amdgpu]
[   54.086591]  amdgpu_pci_probe+0x19f/0x550 [amdgpu]
[   54.087215]  local_pci_probe+0x48/0xa0
[   54.087509]  pci_device_probe+0xc9/0x250
[   54.087812]  really_probe+0x1a4/0x3f0
[   54.088101]  __driver_probe_device+0x7d/0x170
[   54.088443]  driver_probe_device+0x24/0xa0
[   54.088765]  __driver_attach+0xdd/0x1d0
[   54.089068]  ? __pfx___driver_attach+0x10/0x10
[   54.089417]  bus_for_each_dev+0x8e/0xe0
[   54.089718]  driver_attach+0x22/0x30
[   54.090000]  bus_add_driver+0x120/0x220
[   54.090303]  driver_register+0x62/0x120
[   54.090606]  ? __pfx_amdgpu_init+0x10/0x10 [amdgpu]
[   54.091255]  __pci_register_driver+0x62/0x70
[   54.091593]  amdgpu_init+0x67/0xff0 [amdgpu]
[   54.092190]  do_one_initcall+0x5f/0x330
[   54.092495]  do_init_module+0x68/0x240
[   54.092794]  load_module+0x201c/0x2110
[   54.093093]  init_module_from_file+0x97/0xd0
[   54.093428]  ? init_module_from_file+0x97/0xd0
[   54.093777]  idempotent_init_module+0x11c/0x2a0
[   54.094134]  __x64_sys_finit_module+0x64/0xc0
[   54.094476]  do_syscall_64+0x58/0x120
[   54.094767]  entry_SYSCALL_64_after_hwframe+0x6e/0x76

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:44:05 -04:00
Yifan Zhang
3b37e2725a drm/amdgpu: skip kfd init if GFX is not ready.
avoid kfd init crash in that case.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:43:58 -04:00
Philip Yang
305cd109b7 drm/amdkfd: Validate user queue update
Ensure update queue new ring buffer is mapped on GPU with correct size.

Decrease queue old ring_bo queue_refcount and increase new ring_bo
queue_refcount.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:43:49 -04:00
Philip Yang
b049504e21 drm/amdkfd: Validate user queue svm memory residency
Queue CWSR area maybe registered to GPU as svm memory, create queue to
ensure svm mapped to GPU with KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED flag.

Add queue_refcount to struct svm_range, to track queue CWSR area usage.

Because unmap mmu notifier callback return value is ignored, if
application unmap the CWSR area while queue is active, pr_warn message
in dmesg log. To be safe, evict user queue.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24 14:43:28 -04:00
Himal Prasad Ghimiray
b461195781 drm/xe: Delete unused register from xe_regs.h
Register SOFTWARE_FLAGS_SPR33 is unused; therefore, delete it.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715105555.2220444-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-07-24 10:49:50 -07:00
Dmitry Osipenko
445d336cd1 drm/virtio: Fix type of dma-fence context variable
Type of DMA fence context is u64. Fence-waiting code uses u32 for the
context variable, fix it.

Fixes: e4812ab8e6 ("drm/virtio: Refactor and optimize job submission code path")
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240714205009.3408298-1-dmitry.osipenko@collabora.com
2024-07-24 20:42:19 +03:00