The drm_mode_legacy_fb_format() function only generates formats suitable
for little endian devices. switch to drm_driver_legacy_fb_format() here
instead to take the device endianness into consideration, too.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6ae2ff23aa ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()")
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20240702121737.522878-1-thuth@redhat.com
In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.
Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.
This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
Reported-by: Liu Ying <victor.liu@nxp.com>
Fixes: f3d9683346 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
V3: Remove unnecessary declaration of ret by evaluating the return
code of regmap_read directly.
V2: Fix uninitialized cec_status
Cut back a little on error handling to return either IRQ_NONE or
IRQ_HANDLED.
While working on rvkms, I noticed that there's no code that actually uses
the drm_pending_vblank_event that's embedded in vkms_output. So, just drop
the member from the struct.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703160458.1303872-1-lyude@redhat.com
The caching mode for buffer objects with VRAM as a possible
placement was forced to write-combined, regardless of placement.
However, write-combined system memory is expensive to allocate and
even though it is pooled, the pool is expensive to shrink, since
it involves global CPU TLB flushes.
Moreover write-combined system memory from TTM is only reliably
available on x86 and DGFX doesn't have an x86 restriction.
So regardless of the cpu caching mode selected for a bo,
internally use write-back caching mode for system memory on DGFX.
Coherency is maintained, but user-space clients may perceive a
difference in cpu access speeds.
v2:
- Update RB- and Ack tags.
- Rephrase wording in xe_drm.h (Matt Roper)
v3:
- Really rephrase wording.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 622f709ca6 ("drm/xe/uapi: Add support for CPU caching mode")
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 622f709ca6 ("drm/xe/uapi: Add support for CPU caching mode")
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com> #On chat
Link: https://patchwork.freedesktop.org/patch/msgid/20240705132828.27714-1-thomas.hellstrom@linux.intel.com
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330205722.93801-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330205722.93801-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330203831.87003-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330203831.87003-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330203831.87003-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330203831.87003-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Updates for v6.11
Core:
- SM7150 support
DPU:
- SM7150 support
- Fix DSC support for DSI panels in video mode
- Fixed TE vsync source support for DSI command-mode panels
- Fix for devices without UBWC in the display controller (ie.
QCM2290)
DSI:
- Remove unused register-writing wrappers
- Fix DSC support for panels in video mode
- Add support for parsing TE vsync source
- Add support for MSM8937 (28nm DSI PHY)
MDP5:
- Add support for MSM8937
- Fix configuration for MSM8953
GPU:
- Split giant device table into per-gen "hw catalog" similar to
what is done on the display side of the driver
- Fix a702 UBWC mode
- Fix unused variably warnings
- GPU memory traces
- Add param for userspace to know if raytracing is supported
- Memory barrier cleanup and GBIF unhalt fix
- X185 support (aka gpu in X1 laptop chips)
- a505 support
- fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()
-----BEGIN PGP SIGNATURE-----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=n8xn
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.11
1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628134632.28672-1-chunkuang.hu@kernel.org
- Use drm_edid_duplicate() instead of kmemdup().
- Replace existing EDID handling with struct drm_edid functions
for improved management.
- Keep an allocated raw_edid or NULL and handle fake_edid_info in get_modes().
-----BEGIN PGP SIGNATURE-----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=DSsI
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Some cleanups to Exynos Virtual Display driver
- Use drm_edid_duplicate() instead of kmemdup().
- Replace existing EDID handling with struct drm_edid functions
for improved management.
- Keep an allocated raw_edid or NULL and handle fake_edid_info in get_modes().
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703075912.37106-1-inki.dae@samsung.com
On BMG-G21 we need to disable fbc due to complications around the WA.
v2:
- Try to handle with i915_drv.h and compat layer. (Rodrigo)
v3:
- For simplicity retreat back to the original design for now.
- Drop the extra \ from the Makefile (Jani)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-4-matthew.auld@intel.com
This involves enabling l2 caching of host side memory access to VRAM
through the CPU BAR. The main fallout here is with display since VRAM
writes from CPU can now be cached in GPU l2, and display is never
coherent with caches, so needs various manual flushing. In the case of
fbc we disable it due to complications in getting this to work
correctly (in a later patch).
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-3-matthew.auld@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH
E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H
wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR
31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp
zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM
quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg
O6fPUV8=
=pgUx
-----END PGP SIGNATURE-----
Merge v6.10-rc6 into drm-next
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The domain allocated in msm_iommu_new() is for the @dev. Replace
iommu_domain_alloc() with iommu_paging_domain_alloc() to make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240610085555.88197-6-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
To force a write barrier on the device memory, we write to the
SOFTWARE_FLAGS_SPR33 register, but this particular register was
selected because it was one of the writable and unused register.
Since a write barrier should also work if we use the read-only
register, switch to VF_CAP_REG register that is also marked as
accessible for VFs.
While at it, add simple kernel-doc for xe_device_wmb() function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702183704.1022-4-michal.wajdeczko@intel.com
There is no real benefit to maintain a separate file. The register
definitions related to SR-IOV can be placed in existing headers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702183704.1022-3-michal.wajdeczko@intel.com
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626210536.1620176-2-matthew.d.roper@intel.com
(cherry picked from commit 4f82ac6102)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If a queue is already assigned to the hardware, then a newly submitted
job can start straight away without waiting for the tick. However in
this case the devfreq infrastructure isn't notified that the GPU is
busy. By the time the tick happens the job might well have finished and
no time will be accounted for the GPU being busy.
Fix this by recording the GPU as busy directly in queue_run_job() in the
case where there is a CSG assigned and therefore we just ring the
doorbell.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com
Add VM bind IOCTL error injection which steals MSB of the bind flags
field which if set injects errors at various points in the VM bind
IOCTL. Intended to validate error paths. Enabled by CONFIG_DRM_XE_DEBUG.
v4:
- Change define layout (Jonathan)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-8-matthew.brost@intel.com
Update PT layer so if a memory allocation for a PTE fails the error can
be propagated to the user without requiring the VM to be killed.
v5:
- change return value invalidation_fence_init to void (Matthew Auld)
v7:
- Invert i,j usage in two places (Matthew Auld)
- s/0/NULL (Matthew Auld)
- Don't ignore return value of xe_pt_new_shared (Matthew Auld)
- Don't check for NULL in xe_pt_entry (Matthew Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-7-matthew.brost@intel.com
This aligns with the uAPI of an array of binds or single bind that
results in multiple GPUVA ops to be considered a single atomic
operations.
The design is roughly:
- xe_vma_ops is a list of xe_vma_op (GPUVA op)
- each xe_vma_op resolves to 0-3 PT ops
- xe_vma_ops creates a single job
- if at any point during binding a failure occurs, xe_vma_ops contains
the information necessary unwind the PT and VMA (GPUVA) state
v2:
- add missing dma-resv slot reservation (CI, testing)
v4:
- Fix TLB invalidation (Paulo)
- Add missing xe_sched_job_last_fence_add/test_dep check (Inspection)
v5:
- Invert i, j usage (Matthew Auld)
- Add helper to test and add job dep (Matthew Auld)
- Return on anything but -ETIME for cpu bind (Matthew Auld)
- Return -ENOBUFS if suballoc of BB fails due to size (Matthew Auld)
- s/do/Do (Matthew Auld)
- Add missing comma (Matthew Auld)
- Do not assign return value to xe_range_fence_insert (Matthew Auld)
v6:
- s/0x1ff/MAX_PTE_PER_SDI (Matthew Auld, CI)
- Check to large of SA in Xe to avoid triggering WARN (Matthew Auld)
- Fix checkpatch issues
v7:
- Rebase
- Support more than 510 PTEs updates in a bind job (Paulo, mesa testing)
v8:
- Rebase
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-5-matthew.brost@intel.com
Each xe_vma_op resolves to 0-3 pt_ops. Add storage for the pt_ops to
xe_vma_ops which is dynamically allocated based the number and types of
xe_vma_op in the xe_vma_ops list. Allocation only implemented in this
patch.
This will help with converting xe_vma_ops (multiple xe_vma_op) in a
atomic update unit.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-3-matthew.brost@intel.com
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
To adhere to dma fencing rules that fences must signal within a
reasonable amount of time, add a 5 second timeout to preempt fences. If
this timeout occurs, kill the associated VM as this fatal to the VM.
v2:
- Add comment for smp_wmb (Checkpatch)
- Fix kernel doc typo (Inspection)
- Add comment for killed check (Niranjana)
v3:
- Drop smp_wmb (Matthew Auld)
- Don't take vm->lock in preempt fence worker (Matthew Auld)
- Drop RB given changes to patch
v4:
- Add WRITE/READ_ONCE (Niranjana)
- Don't export xe_vm_kill (Niranjana)
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626004137.4060806-1-matthew.brost@intel.com
Add a helper to dump the Display Stream Compression configuration, taken
into use in the i915 driver by a later patch.
v2:
- Rebase on the s/DRM_X16/FXP_Q4 change.
- s/DSC configration/DSC configuration in the function documentation.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-3-imre.deak@intel.com
Add helpers to convert between q4 fixed point and integer/fraction
values. Also add the format/argument macros required to printk q4 fixed
point variables. The q4 notation is based on the short variant described
by
https://en.wikipedia.org/wiki/Q_(number_format)
where only the number of fraction bits in the fixed point value are
defined, while the full size is deducted from the container type, that
is the size of int for these helpers. Using the fxp_ prefix, which makes
moving these helpers outside of drm to a more generic place easier, if
they prove to be useful.
These are needed by later patches dumping the Display Stream Compression
configuration in DRM core and in the i915 driver to replace the
corresponding bpp_x16 helpers defined locally in the driver.
v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16.
(Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-2-imre.deak@intel.com
[Why]
During resume, observe that we receive CSN event before we start topology
probing. Handling CSN at this moment based on uncertain topology is
unnecessary.
[How]
Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN
if the topology is yet to be probed.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-3-Wayne.Lin@amd.com
[Why]
After supend/resume, with topology unchanged, observe that
link_address_sent of all mstb are marked as false even the topology probing
is done without any error.
It is caused by wrongly also include "ret == 0" case as a probing failure
case.
[How]
Remove inappropriate checking conditions.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Fixes: 37dfdc55ff ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-2-Wayne.Lin@amd.com