When slice_height is 0, the division by slice_height in the calculation
of the number of slices will cause a division by zero driver crash. This
leaves the kernel in a state that requires a reboot. This patch adds a
check to avoid the division by zero.
The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on
a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor
connected via Thunderbolt. The amdgpu driver crashed with this exception
when I rebooted the system with the monitor connected.
kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2))
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu
After applying this patch, the driver no longer crashes when the monitor
is connected and the system is rebooted. I believe this is the same
issue reported for 3113.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jose Fernandez <josef@netflix.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3113
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add some missing debug registers for DPCS and RDPC debug.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ip dump for each ip of the asic in the
devcoredump for all the ips where a callback
is registered for register dump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Invoke the dump_ip_state function for each ip before
the asic resets and save the register values for
debugging via devcoredump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to print ip information to be
used to print registers in devcoredump
buffer.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding gfx10 gc registers to be used for register
dump via devcoredump during a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to reserve bad page.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return 0 to avoid returning an uninitialized variable r
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete fence fallback timer to fix the ramdom
use-after-free issue.
v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d76c0a23b5.
This change must be reverted since it caused soft hangs when changing
the refresh rate to 122 & 144Hz when using a 7000 series GPU.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses buffer overflow in the smu_v14_0_init_microcode
function. The issue was about the snprintf function writing more bytes
into the fw_name buffer than it can hold.
The line of code is:
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
Here, snprintf is used to write a formatted string into fw_name. The
format is "amdgpu/%s.bin", where %s is a placeholder for the string
ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum
number of bytes it can write into fw_name, including the
null-terminating character. In the original code, fw_name is an array of
30 characters.
The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds
the 30 bytes allocated for fw_name. This is because %s could be replaced
by ucode_prefix, which can be up to 29 characters long. Adding the 12
characters from "amdgpu/" and ".bin", the total length could be 41
characters.
To address this, the size of ucode_prefix has been reduced to 15
characters. This ensures that the maximum length of the string written into
fw_name does not exceed its capacity.
smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fe6cd91524 ("drm/amd/swsmu: add smu14 ip support")
Cc: Li Ma <li.ma@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace tmz flag into buffer flag to make it easier to understand
and extend
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To adapt to different gc versions in gfx_v9_4_3.c file.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IGTs (e.g. xe_vm) can provide the exact same coverage as the PT update
selftest. The PT update selftest is dependent on internal functions
which can change thus maintaining this test is costly and provide no
extra coverage. Delete this test.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-14-matthew.brost@intel.com
xe_gt_tlb_invalidation_range accepts a start and end address rather than
a VMA. This will enable multiple VMAs to be invalidated in a single
invalidation. Update the PT layer to use this new function.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-13-matthew.brost@intel.com
Rather than adding a ufence to a VMA in the bind function, add the
ufence to all VMAs in the IOCTL that require binds in
vm_bind_ioctl_ops_fini. This help withs the transition to job 1 per VM
bind IOCTL.
v2:
- Rebase
v3:
- Fix typo in commit (Oak)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-12-matthew.brost@intel.com
Rather than checking for an unsignaled ufence ay unbind time, check for
this during the op_lock_and_prep function. This helps with the
transition to job 1 per VM bind IOCTL.
v2:
- Rebase
v3:
- Fix typo in commit message (Oak)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-11-matthew.brost@intel.com
Simplify VM bind code by signaling out-fences / destroying VMAs in a
single location. Will help with transition single job for many bind ops.
v2:
- s/vm_bind_ioctl_ops_install_fences/vm_bind_ioctl_ops_fini (Oak)
- Set last fence in vm_bind_ioctl_ops_fini (Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-10-matthew.brost@intel.com
In effort to make multiple VMA binds operations atomic (1 job), all
device page tables updates will be implemented via a xe_vma_ops (atomic
unit) interface,
Add xe_vma_rebind function which is implemented using xe_vma_ops
interface. Use xe_vma_rebind in GPU page faults for rebinds rather than
directly called deprecated function in PT layer.
v3:
- Update commit message (Oak)
v4:
- Fix tile_mask argument (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-8-matthew.brost@intel.com
Clean up everything in VM bind IOCTL in 1 path for both errors and
non-errors. Also move VM bind IOCTL cleanup from ops (also used by
non-IOCTL binds) to the VM bind IOCTL.
v2:
- Break ops_execute on error (Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-7-matthew.brost@intel.com
All non-binding operations in VM bind IOCTL should be in the lock and
prepare step rather than the execution step. Move prefetch to conform to
this pattern.
v2:
- Rebase
- New function names (Oak)
- Update stale comment (Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-4-matthew.brost@intel.com
Add ops_execute function which returns a fence. This will be helpful to
initiate all binds (VM bind IOCTL, rebinds in exec IOCTL, rebinds in
preempt rebind worker, and rebinds in pagefaults) via a gpuva ops list.
Returning a fence is needed in various paths.
v2:
- Rebase
Cc: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-3-matthew.brost@intel.com
Lock all BOs used in gpuva ops and validate all BOs in a single step
during the VM bind IOCTL.
This help with the transition to making all gpuva ops in a VM bind IOCTL
a single atomic job which is required for proper error handling.
v2:
- Better commit message (Oak)
- s/op_lock/op_lock_and_prep, few other renames too (Oak)
- Use DRM_EXEC_IGNORE_DUPLICATES flag in drm_exec_init (local testing)
- Do not reserve slots in locking step (direction based on series from Thomas)
v3:
- Validate BO if is immediate set (Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-2-matthew.brost@intel.com
The feedback we get from the DPRX is per-lane. Make changes using this
information, instead of picking the maximum values from all lanes. This
results in more-consistent training on marginal links.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423171859.3953024-5-sean.anderson@linux.dev
Enable this message for verbose debugging only as it is otherwise
printed after every AUX message, quickly filling the log buffer.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423171859.3953024-4-sean.anderson@linux.dev
The blend, avbuf, and audio members of zynqmp_disp are anonymous structs
with only one member each. This is rather pointless, so move the members
up a level.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423171859.3953024-2-sean.anderson@linux.dev
Add the NVreg_RegistryDwords command line parameter, which allows
specifying additional registry keys to be sent to GSP-RM. This
allows additional configuration, debugging, and experimentation
with GSP-RM, which uses these keys to alter its behavior.
Note that these keys are passed as-is to GSP-RM, and Nouveau does
not parse them. This is in contrast to the Nvidia driver, which may
parse some of the keys to configure some functionality in concert with
GSP-RM. Therefore, any keys which also require action by the driver
may not function correctly when passed by Nouveau. Caveat emptor.
The name and format of NVreg_RegistryDwords is the same as used by
the Nvidia driver, to maintain compatibility.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417215317.3490856-1-ttabi@nvidia.com
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On older platforms (12.00) the PF driver must explicitly unblock
VF's modifications to the GGTT. On newer platforms this capability
is enabled by default.
Bspec: 49908, 53204
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425143927.2265-1-michal.wajdeczko@intel.com
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=xhbG
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.10
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425153859.3579-1-chunkuang.hu@kernel.org