Commit graph

126,670 commits

Author SHA1 Message Date
Zhanjun Dong
bde5d76785 drm/xe: Add helper macro to loop each DSS
Add helper macro to loop each DSS. This is a precursor patch to allow
for easier iteration through MCR registers and other per-DSS uses.

Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314210735.258553-2-zhanjun.dong@intel.com
2024-03-14 16:42:18 -07:00
Matt Roper
431547134e drm/xe/mocs: Clarify which GT is being operated on
Switch the MOCS-related debug messages to use a GT-specific logging
function and add ID/type output to the beginning of the MOCS kunit test
to assist with debug when problems arise.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314195825.3226856-4-matthew.d.roper@intel.com
2024-03-14 15:46:17 -07:00
Matt Roper
00e9062e8d drm/xe/mocs: Determine MCR separately for primary/media GT in kunit test
Although MOCS registers became multicast in graphics version 12.50 on
the primary GT, this transition did not happen until version 20 on the
media GT.  Considering each GT independently is mostly important for
MTL/ARL where the Xe_LPM+ IP has non-MCR MOCS registers, even though
Xe_LPG IP has MCR registers.

Bspec: 67789, 71186
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314195825.3226856-3-matthew.d.roper@intel.com
2024-03-14 15:46:15 -07:00
Daniele Ceraolo Spurio
cc244ce531 drm/xe/gsc: Handle GSCCS ER interrupt
Starting on Xe2, the GSCCS engine reset is a 2-step process. When the
driver or the GuC hits the GDRST register, the CS is immediately reset
and a success is reported, but the GSC shim continues its reset in the
background. While the shim reset is ongoing, the CS is able to accept
new context submission, but any commands that require the shim will
be stalled until the reset is completed. This means that we can keep
submitting to the GSCCS as long as we make sure that the preemption
timeout is big enough to cover any delay introduced by the reset; since
the GSC preempt timeout is not tunable at runtime, we only need to check
that the value set in kconfig is big enough (and increase it if it
isn't).
When the shim reset completes, a specific CS interrupt is triggered,
in response to which we need to check the GSCI_TIMER_STATUS register
to see if the reset was successful or not.
Note that the GSCI_TIMER_STATUS register is not power save/restored,
so it gets reset on MC6 entry. However, a reset failure stops MC6,
so in that scenario we're always guaranteed to find the correct value.

Since we can't check the register within interrupt context, the
existing GSC worker has been updated to handle it.
The expected action to take on ER failure is to trigger a driver FLR,
but we still don't support that, so for now we just print an error. A
comment has been added to the code to keep track of the FLR requirement.

v2: Add a check for the initial timeout value (Alan)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304145634.820684-1-daniele.ceraolospurio@intel.com
2024-03-14 14:47:13 -07:00
José Roberto de Souza
dd8a07f06d drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC
Doing a XE_EXEC with num_batch_buffer == 0 makes signals passed as
argument to be signaled when the last real XE_EXEC is completed.
But to do that it was first pinning all VMAs in drm_gpuvm_exec_lock(),
this patch remove this pinning as it is not required.

This change also help Mesa implementing memory over-commiting recovery
as it needs to unbind not needed VMAs when the whole VM can't fit
in GPU memory but it can only do the unbiding when the last XE_EXEC
is completed.
So with this change Mesa can get the signal it want without getting
out-of-memory errors.

Fixes: eb9702ad29 ("drm/xe: Allow num_batch_buffer / num_binds == 0 in IOCTLs")
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313171318.121066-1-jose.souza@intel.com
(cherry picked from commit 58480c1c91)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-14 14:29:42 -05:00
Himal Prasad Ghimiray
d58b4ef63b drm/xe: Return if kobj creation is failed
Return after warning regarding kobj creation failure.

Fixes: 4ae3aeab32 ("drm/xe: Add vram frequency sysfs attributes")
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313150545.2830408-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 989d07ac6b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-14 14:29:38 -05:00
Matthew Brost
3860213943 drm/xe: Invalidate userptr VMA on page pin fault
Rather than return an error to the user or ban the VM when userptr VMA
page pin fails with -EFAULT, invalidate VMA mappings. This supports the
UMD use case of freeing userptr while still having bindings.

Now that non-faulting VMs can invalidate VMAs, drop the usm prefix for
the tile_invalidated member.

v2:
 - Fix build error (CI)
v3:
 - Don't invalidate VMA if in fault mode, rather kill VM (Thomas)
 - Update commit message with tile_invalidated name chagne (Thomas)
 - Wait VM bookkeep slots with VM resv lock (Thomas)
v4:
 - Move list_del_init(&userptr.repin_link) after error check (Thomas)
 - Assert not in fault mode (Matthew)

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312183907.933835-1-matthew.brost@intel.com
(cherry picked from commit 521db22a1d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-14 14:29:33 -05:00
Matthew Auld
2c5b70f74d drm/xe/guc_submit: use jiffies for job timeout
drm_sched_init() expects jiffies for the timeout, but here we are
passing the timeout in ms. Convert to jiffies instead.

Fixes: eef55700f3 ("drm/xe: Add sysfs for default engine scheduler properties")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314121554.223229-2-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-14 10:11:34 -07:00
Hsin-Yi Wang
ca3c781949 drm/panel-edp: Fix AUO 0x405c panel naming and add a variant
There are 2 different AUO panels using the same panel id. One of the
variants requires using overridden modes to resolve glitching issue as
described in commit 70e0d5550f ("drm/panel-edp: Add auo_b116xa3_mode").
Other variants should use the modes parsed from EDID.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-6-hsinyi@chromium.org
2024-03-14 08:24:45 -07:00
Hsin-Yi Wang
bf201127c1 drm/panel-edp: Match edp_panels with panel identity
It's found that some panels have variants that they share the same panel id
although their EDID and names are different. When matching generic edp
panels, we should first match with both panel identity, which contains both
panel id and panel name. If not found, match with panel id only.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-5-hsinyi@chromium.org
2024-03-14 08:23:47 -07:00
Hsin-Yi Wang
7ff53c2f77 drm/edid: Match edid quirks with identity
Currently edid quirks are matched by panel id only.

Modify it to match with identity so it's easier to be extended
for more complex matching if required.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-4-hsinyi@chromium.org
2024-03-14 08:23:27 -07:00
Hsin-Yi Wang
6e3fdedcf0 drm/edid: Add a function to match EDID with identity
Create a type drm_edid_ident as the identity of an EDID. Currently it
contains panel id and monitor name.

Create a function that can match a given EDID and an identity:
1. Reject if the panel id doesn't match.
2. If name is not null in identity, try to match it in the detailed timing
   blocks. Note that some panel vendors put the monitor name after
   EDID_DETAIL_MONITOR_STRING.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-3-hsinyi@chromium.org
2024-03-14 08:22:57 -07:00
Hsin-Yi Wang
a0b39da116 drm_edid: Add a function to get EDID base block
It's found that some panels have variants that they share the same panel id
although their EDID and names are different. Besides panel id, now we need
more information from the EDID base block to distinguish these panel
variants.

Add drm_edid_read_base_block() to return the EDID base block, which is
wrapped in struct drm_edid.

Caller can further use it to get panel id or check if the block contains
certain strings, such as panel name.

Merge drm_edid_get_panel_id() and edid_extract_panel_id() into one
function.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-2-hsinyi@chromium.org
2024-03-14 08:20:26 -07:00
Jouni Högander
f777728663 drm/i915/display: Increase number of fast wake precharge pulses
Increasing number of fast wake sync pulses seem to fix problems with
certain PSR panels. This should be ok for other panels as well as the eDP
specification allows 10...16 precharge pulses and we are still within that
range.

v3: mention laptop model and panel manufacturer and model in comment
v2: add comment explaining pulse count is increased

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9739
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313133221.868391-5-jouni.hogander@intel.com
2024-03-14 16:27:15 +02:00
Jouni Högander
1d81ee5562 drm/i915/psr: Calculate IO wake and fast wake lines for DISPLAY_VER < 12
Bspec mentions 50 us for IO wake time and 32 us for fast wake time. 32 us
is most probably wrong as it doesn't meet the specification as fast wake
time is calculated in Bspec like this:

10..16 us (precharge) + 8 us (preamble) + 4 us (phy_wake) + 20 us
(tfw_exit_latency)

Instead of using these constants calculate IO wake and fast wake for
DISPLAY_VER < 12 as well.

v3:
  - do not handle < 9 separately
  - add own helper for skl and tgl io buffer wake times
v2:
  - initialize io/fast_wake_time for display version < 9

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313133221.868391-4-jouni.hogander@intel.com
2024-03-14 16:27:03 +02:00
Jouni Högander
fe10e7c681 drm/i915/psr: Improve fast and IO wake lines calculation
Current fast and IO wake lines calculation is assuming fast wake sync
length is 18 pulses. Let's improve this by checking actual length.

Add getter for IO buffer wake time and return 10 us there which was assumed
with static 42 us IO wake time. Upcoming patches will extent this for
different display versions.

Bspec: 65450

v3:
  - s/get_io_buffer_wake_time/io_buffer_wake_time/ and use it directly in
    calculation.
v2:
  - rename io_wake_time in if block to io_buffer_wake_time
  - rename get_io_wake_time to get_io_buffer_wake_time

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313133221.868391-3-jouni.hogander@intel.com
2024-03-14 16:26:51 +02:00
Jouni Högander
8453c12aa2 drm/i915/display: Make intel_dp_aux_fw_sync_len available for PSR code
ALPM AUX-Wake fast wake sync pulse count is needed by PSR to calculate IO
wake and fast wake lines. Convert intel_dp_aux_fw_sync_len as non-static
to make it available for PSR code.

v2: use int instead of u8

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313133221.868391-2-jouni.hogander@intel.com
2024-03-14 16:25:25 +02:00
Maxime Ripard
5d515eb129
drm/sun4i: hdmi: Fix u64 div on 32bit arch
Commit 358e76fd61 ("drm/sun4i: hdmi: Consolidate atomic_check and
mode_valid") changed the clock rate from an unsigned long to an unsigned
long long resulting in a a 64-bit division that might not be supported
on all platforms.

The resulted in compilation being broken at least for m68k, xtensa and
some arm configurations, at least.

Fixes: 358e76fd61 ("drm/sun4i: hdmi: Consolidate atomic_check and mode_valid")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYvG9KE15PGNoLu+SBVyShe+u5HBLQ81+kK9Zop6u=ywmw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011839.KLiXh4wC-lkp@intel.com/
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20240304091225.366325-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-03-14 13:45:03 +01:00
Shekhar Chauhan
2c215a93b9 drm/i915/dp: Increase idle pattern wait timeout to 2ms
The driver currently waits 1ms for idle patterns,
but for Xe2LPD and possibly future display IPs,
it requires a 1640us (rounded up to 2ms) timeout
whilst waiting for idle patterns for MST streams.

To simplify the code, the timeout is uniformly
increased by 1ms across all platforms/display IPs.

v1: Introduced the 2ms wait timeout.
v2: Segregated the wait timeout for platforms before & after LNL.
v3: Fixed 2 cosmetic changes.
v4: Revert to v2 design with commit message enhancements.
v5: Minor cosmetic changes to the commit message.

BSpec: 68849
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311041504.806058-1-shekhar.chauhan@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-14 10:43:01 +02:00
Nirmoy Das
002d8f0b4f drm/xe: Remove unused xe_bo->props struct
Property struct is not being used so remove it and related dead code.

Fixes: ddfa2d6a84 ("drm/xe/uapi: Kill VM_MADVISE IOCTL")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311151159.10036-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 21:21:56 -07:00
Linus Torvalds
480e035fc4 drm for 6.9:
core:
 - EDID cleanups
 - scheduler error handling fixes
 - managed: add drmm_release_action() with tests
 - add ratelimited drm debug print
 - DPCD PSR early transport macro
 - DP tunneling and bandwidth allocation helpers
 - remove built-in edids
 - dp: Avoid AUX transfers on powered-down displays
 - dp: Add VSC SDP helpers
 
 cross drivers:
 - use new drm print helpers
 - switch to ->read_edid callback
 - gem: add stats for shared buffers plus updates to amdgpu, i915, xe
 
 syncobj:
 - fixes to waiting and sleeping
 
 ttm:
 - add tests
 - fix errno codes
 - simply busy-placement handling
 - fix page decryption
 
 media:
 - tc358743: fix v4l device registration
 
 video:
 - move all kernel parameters for video behind CONFIG_VIDEO
 
 sound:
 - remove <drm/drm_edid.h> include from header
 
 ci:
 - add tests for msm
 - fix apq8016 runner
 
 efifb:
 - use copy of global screen_info state
 
 vesafb:
 - use copy of global screen_info state
 
 simplefb:
 - fix logging
 
 bridge:
 - ite-6505: fix DP link-training bug
 - samsung-dsim: fix error checking in probe
 - samsung-dsim: add bsh-smm-s2/pro boards
 - tc358767: fix regmap usage
 - imx: add i.MX8MP HDMI PVI plus DT bindings
 - imx: add i.MX8MP HDMI TX plus DT bindings
 - sii902x: fix probing and unregistration
 - tc358767: limit pixel PLL input range
 - switch to new drm_bridge_read_edid() interface
 
 panel:
 - ltk050h3146w: error-handling fixes
 - panel-edp: support delay between power-on and enable; use put_sync in
   unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
   BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
 - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
 - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
 - add BOE TH101MB31IG002-28A plus DT bindings
 - add EDT ETML1010G3DRA plus DT bindings
 - add Novatek NT36672E LCD DSI plus DT bindings
 - nt36523: support 120Hz timings, fix includes
 - simple: fix display timings on RK32FN48H
 - visionox-vtdr6130: fix initialization
 - add Powkiddy RGB10MAX3 plus DT bindings
 - st7703: support panel rotation plus DT bindings
 - add Himax HX83112A plus DT bindings
 - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
 
 panel-orientation-quirks:
 - GPD Win Mini
 
 amdgpu:
 - Validate DMABuf imports in compute VMs
 - Add RAS ACA framework
 - PSP 13 fixes
 - Misc code cleanups
 - Replay fixes
 - Atom interpretor PS, WS bounds checking
 - DML2 fixes
 - Audio fixes
 - DCN 3.5 Z state fixes
 - Remove deprecated ida_simple usage
 - UBSAN fixes
 - RAS fixes
 - Enable seq64 infrastructure
 - DC color block enablement
 - Documentation updates
 - DC documentation updates
 - DMCUB updates
 - ATHUB 4.1 support
 - LSDMA 7.0 support
 - JPEG DPG support
 - IH 7.0 support
 - HDP 7.0 support
 - VCN 5.0 support
 - SMU 13.0.6 updates
 - NBIO 7.11 updates
 - SDMA 6.1 updates
 - MMHUB 3.3 updates
 - DCN 3.5.1 support
 - NBIF 6.3.1 support
 - VPE 6.1.1 support
 
 amdkfd:
 - Validate DMABuf imports in compute VMs
 - SVM fixes
 - Trap handler updates and enhancements
 - Fix cache size reporting
 - Relocate the trap handler
 
 radeon:
 - Atom interpretor PS, WS bounds checking
 - Misc code cleanups
 
 xe:
 - new query for GuC submission version
 - Remove unused persistent exec_queues
 - Add vram frequency sysfs attributes
 - Add the flag XE_VM_BIND_FLAG_DUMPABLE
 - Drop pre-production workarounds
 - Drop kunit tests for unsupported platforms
 - Start pumbling SR-IOV support with memory based interrupts for VF
 - Allow to map BO in GGTT with PAT index corresponding to
   XE_CACHE_UC to work with memory based interrupts
 - Add GuC Doorbells Manager as prep work SR-IOV
 - Implement additional workarounds for xe2 and MTL
 - Program a few registers according to perfomance guide spec for Xe2
 - Fix remaining 32b build issues and enable it back
 - Fix build with CONFIG_DEBUG_FS=n
 - Fix warnings from GuC ABI headers
 - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
 - Release mmap mappings on rpm suspend
 - Disable mid-thread preemption when not properly supported by hardware
 - Fix xe_exec by reserving extra fence slot for CPU bind
 - Fix xe_exec with full long running exec queue
 - Canonicalize addresses where needed for Xe2 and add to devcoredum
 - Toggle USM support for Xe2
 - Only allow 1 ufence per exec / bind IOCTL
 - Add GuC firmware loading for Lunar Lake
 - Add XE_VMA_PTE_64K VMA flag
 
 i915:
 - Add more ADL-N PCI IDs
 - Enable fastboot also on older platforms
 - Early transport for panel replay and PSR
 - New ARL PCI IDs
 - DP TPS4 PHY test pattern support
 - Unify and improve VSC SDP for PSR and non-PSR cases
 - Refactor memory regions and improve debug logging
 - Rework global state serialization
 - Remove unused CDCLK divider fields
 - Unify HDCP connector logging format
 - Use display instead of graphics version in display code
 - Move VBT and opregion debugfs next to the implementation
 - Abstract opregion interface, use opaque type
 - MTL fixes
 - HPD handling fixes
 - Add GuC submission interface version query
 - Atomically invalidate userptr on mmu-notifier
 - Update handling of MMIO triggered reports
 - Don't make assumptions about intel_wakeref_t type
 - Extend driver code of Xe_LPG to Xe_LPG+
 - Add flex arrays to struct i915_syncmap
 - Allow for very slow HuC loading
 - DP tunneling and bandwidth allocation support
 
 msm:
 - Correct bindings for MSM8976 and SM8650 platforms
 - Start migration of MDP5 platforms to DPU driver
 - X1E80100 MDSS support
 - DPU:
 - Improve DSC allocation, fixing several important corner cases
 - Add support for SDM630/SDM660 platforms
 - Simplify dpu_encoder_phys_ops
 - Apply fixes targeting DSC support with a single DSC encoder
 - Apply fixes for HCTL_EN timing configuration
 - X1E80100 support
 - Add support for YUV420 over DP
 - GPU:
 - fix sc7180 UBWC config
 - fix a7xx LLC config
 - new gpu support: a305B, a750, a702
 - machine support: SM7150 (different power levels than other a618)
 - a7xx devcoredump support
 
 habanalabs:
 - configure IRQ affinity according to NUMA node
 - move HBM MMU page tables inside the HBM
 - improve device reset
 - check extended PCIe errors
 
 ivpu:
 - updates to firmware API
 - refactor BO allocation
 
 imx:
 - use devm_ functions during init
 
 hisilicon:
 - fix EDID includes
 
 mgag200:
 - improve ioremap usage
 - convert to struct drm_edid
 - Work around PCI write bursts
 
 nouveau:
 - disp: use kmemdup()
 - fix EDID includes
 - documentation fixes
 
 qaic:
 - fixes to BO handling
 - make use of DRM managed release
 - fix order of remove operations
 
 rockchip:
 - analogix_dp: get encoder port from DT
 - inno_hdmi: support HDMI for RK3128
 - lvds: error-handling fixes
 
 ssd130x:
 - support SSD133x plus DT bindings
 
 tegra:
 - fix error handling
 
 tilcdc:
 - make use of DRM managed release
 
 v3d:
 - show memory stats in debugfs
 - Support display MMU page size
 
 vc4:
 - fix error handling in plane prepare_fb
 - fix framebuffer test in plane helpers
 
 virtio:
 - add venus capset defines
 
 vkms:
 - fix OOB access when programming the LUT
 - Kconfig improvements
 
 vmwgfx:
 - unmap surface before changing plane state
 - fix memory leak in error handling
 - documentation fixes
 - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
 - fix null-pointer deref in execbuf
 - refactor display-mode probing
 - fix fencing for creating cursor MOBs
 - fix cursor-memory lifetime
 
 xlnx:
 - fix live video input for ZynqMP DPSUB
 
 lima:
 - fix memory leak
 
 loongson:
 - fail if no VRAM present
 
 meson:
 - switch to new drm_bridge_read_edid() interface
 
 renesas:
 - add RZ/G2L DU support plus DT bindings
 
 mxsfb:
 - Use managed mode config
 
 sun4i:
 - HDMI: updates to atomic mode setting
 
 mediatek:
 - Add display driver for MT8188 VDOSYS1
 - DSI driver cleanups
 - Filter modes according to hardware capability
 - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
 
 etnaviv:
 - enhancements for NPU and MRT support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmXxI+AACgkQDHTzWXnE
 hr5isxAApZ+DxesDbV8bd91KXL03vTfJtM5xVQuZoDzrr20KdTvu2EfQcCFnAUjl
 YtY05U9arDT4Txq5nX70Xc6I5M9HN6lqSUfsWhI6xUcR9TUollPbYwEu8IdoMaCG
 TRnspkiheye+DLFY6omLNH2aG1/k1IIefVWKaClFpbNPaaSHREDiY7/rkmErMBIS
 hrN13+6IVzX7+6fmNgHugUfdyawDJ8J9Nsc8T3Zlioljq3p+VbtStLsGeABTHSEJ
 MX18FwbGllI+QcXvaXM8gIg8NYKvSx/ZtlvKTpyPpTjZT3i3BpY+7yJqWDRQhiGM
 VTX7di1f90yWgzlYE5T33MW7Imvw3q04N7qYJ+Z1LHD/A8VyjwPUKLeul8P9ousT
 0qQLSQsnuXH5AMLDh8IeLG/i0hAMWJ2UbProFSAFhd/UQHP7QOm2mmCsf79me9It
 qKFn6QZKvAKGZk/myTbQIVAmQWrDCpKq4i1aoKXEvcEuQUtM1lPvmMVsStVEfG+y
 ACaI24zSJACViH6rfhVzr74giwZX/ay0NSXqwRXfD5kX8fXb050LxLGW93iYZoHv
 FpdT2C8oTS1A5nsZpoxwVP35euUsp7D4J5YYbrZder2m0s0DDCVLMqdFrSVNdWDM
 4ZQRiY3wCiJjSS8dpwppW0uaVGjtnGQnjQ5sQrIw0vKkwxee0TQ=
 =WLj9
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "Highlights are usual, more AMD IP blocks for future hw, i915/xe
  changes, Displayport tunnelling support for i915, msm YUV over DP
  changes, new tests for ttm, but its mostly a lot of stuff all over the
  place from lots of people.

  core:
   - EDID cleanups
   - scheduler error handling fixes
   - managed: add drmm_release_action() with tests
   - add ratelimited drm debug print
   - DPCD PSR early transport macro
   - DP tunneling and bandwidth allocation helpers
   - remove built-in edids
   - dp: Avoid AUX transfers on powered-down displays
   - dp: Add VSC SDP helpers

  cross drivers:
   - use new drm print helpers
   - switch to ->read_edid callback
   - gem: add stats for shared buffers plus updates to amdgpu, i915, xe

  syncobj:
   - fixes to waiting and sleeping

  ttm:
   - add tests
   - fix errno codes
   - simply busy-placement handling
   - fix page decryption

  media:
   - tc358743: fix v4l device registration

  video:
   - move all kernel parameters for video behind CONFIG_VIDEO

  sound:
   - remove <drm/drm_edid.h> include from header

  ci:
   - add tests for msm
   - fix apq8016 runner

  efifb:
   - use copy of global screen_info state

  vesafb:
   - use copy of global screen_info state

  simplefb:
   - fix logging

  bridge:
   - ite-6505: fix DP link-training bug
   - samsung-dsim: fix error checking in probe
   - samsung-dsim: add bsh-smm-s2/pro boards
   - tc358767: fix regmap usage
   - imx: add i.MX8MP HDMI PVI plus DT bindings
   - imx: add i.MX8MP HDMI TX plus DT bindings
   - sii902x: fix probing and unregistration
   - tc358767: limit pixel PLL input range
   - switch to new drm_bridge_read_edid() interface

  panel:
   - ltk050h3146w: error-handling fixes
   - panel-edp: support delay between power-on and enable; use put_sync
     in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
     V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
   - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
   - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
   - add BOE TH101MB31IG002-28A plus DT bindings
   - add EDT ETML1010G3DRA plus DT bindings
   - add Novatek NT36672E LCD DSI plus DT bindings
   - nt36523: support 120Hz timings, fix includes
   - simple: fix display timings on RK32FN48H
   - visionox-vtdr6130: fix initialization
   - add Powkiddy RGB10MAX3 plus DT bindings
   - st7703: support panel rotation plus DT bindings
   - add Himax HX83112A plus DT bindings
   - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
   - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs

  panel-orientation-quirks:
   - GPD Win Mini

  amdgpu:
   - Validate DMABuf imports in compute VMs
   - Add RAS ACA framework
   - PSP 13 fixes
   - Misc code cleanups
   - Replay fixes
   - Atom interpretor PS, WS bounds checking
   - DML2 fixes
   - Audio fixes
   - DCN 3.5 Z state fixes
   - Remove deprecated ida_simple usage
   - UBSAN fixes
   - RAS fixes
   - Enable seq64 infrastructure
   - DC color block enablement
   - Documentation updates
   - DC documentation updates
   - DMCUB updates
   - ATHUB 4.1 support
   - LSDMA 7.0 support
   - JPEG DPG support
   - IH 7.0 support
   - HDP 7.0 support
   - VCN 5.0 support
   - SMU 13.0.6 updates
   - NBIO 7.11 updates
   - SDMA 6.1 updates
   - MMHUB 3.3 updates
   - DCN 3.5.1 support
   - NBIF 6.3.1 support
   - VPE 6.1.1 support

  amdkfd:
   - Validate DMABuf imports in compute VMs
   - SVM fixes
   - Trap handler updates and enhancements
   - Fix cache size reporting
   - Relocate the trap handler

  radeon:
   - Atom interpretor PS, WS bounds checking
   - Misc code cleanups

  xe:
   - new query for GuC submission version
   - Remove unused persistent exec_queues
   - Add vram frequency sysfs attributes
   - Add the flag XE_VM_BIND_FLAG_DUMPABLE
   - Drop pre-production workarounds
   - Drop kunit tests for unsupported platforms
   - Start pumbling SR-IOV support with memory based interrupts for VF
   - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
     to work with memory based interrupts
   - Add GuC Doorbells Manager as prep work SR-IOV
   - Implement additional workarounds for xe2 and MTL
   - Program a few registers according to perfomance guide spec for Xe2
   - Fix remaining 32b build issues and enable it back
   - Fix build with CONFIG_DEBUG_FS=n
   - Fix warnings from GuC ABI headers
   - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
   - Release mmap mappings on rpm suspend
   - Disable mid-thread preemption when not properly supported by
     hardware
   - Fix xe_exec by reserving extra fence slot for CPU bind
   - Fix xe_exec with full long running exec queue
   - Canonicalize addresses where needed for Xe2 and add to devcoredum
   - Toggle USM support for Xe2
   - Only allow 1 ufence per exec / bind IOCTL
   - Add GuC firmware loading for Lunar Lake
   - Add XE_VMA_PTE_64K VMA flag

  i915:
   - Add more ADL-N PCI IDs
   - Enable fastboot also on older platforms
   - Early transport for panel replay and PSR
   - New ARL PCI IDs
   - DP TPS4 PHY test pattern support
   - Unify and improve VSC SDP for PSR and non-PSR cases
   - Refactor memory regions and improve debug logging
   - Rework global state serialization
   - Remove unused CDCLK divider fields
   - Unify HDCP connector logging format
   - Use display instead of graphics version in display code
   - Move VBT and opregion debugfs next to the implementation
   - Abstract opregion interface, use opaque type
   - MTL fixes
   - HPD handling fixes
   - Add GuC submission interface version query
   - Atomically invalidate userptr on mmu-notifier
   - Update handling of MMIO triggered reports
   - Don't make assumptions about intel_wakeref_t type
   - Extend driver code of Xe_LPG to Xe_LPG+
   - Add flex arrays to struct i915_syncmap
   - Allow for very slow HuC loading
   - DP tunneling and bandwidth allocation support

  msm:
   - Correct bindings for MSM8976 and SM8650 platforms
   - Start migration of MDP5 platforms to DPU driver
   - X1E80100 MDSS support
   - DPU:
      - Improve DSC allocation, fixing several important corner cases
      - Add support for SDM630/SDM660 platforms
      - Simplify dpu_encoder_phys_ops
      - Apply fixes targeting DSC support with a single DSC encoder
      - Apply fixes for HCTL_EN timing configuration
      - X1E80100 support
      - Add support for YUV420 over DP
   - GPU:
      - fix sc7180 UBWC config
      - fix a7xx LLC config
      - new gpu support: a305B, a750, a702
      - machine support: SM7150 (different power levels than other a618)
      - a7xx devcoredump support

  habanalabs:
   - configure IRQ affinity according to NUMA node
   - move HBM MMU page tables inside the HBM
   - improve device reset
   - check extended PCIe errors

  ivpu:
   - updates to firmware API
   - refactor BO allocation

  imx:
   - use devm_ functions during init

  hisilicon:
   - fix EDID includes

  mgag200:
   - improve ioremap usage
   - convert to struct drm_edid
   - Work around PCI write bursts

  nouveau:
   - disp: use kmemdup()
   - fix EDID includes
   - documentation fixes

  qaic:
   - fixes to BO handling
   - make use of DRM managed release
   - fix order of remove operations

  rockchip:
   - analogix_dp: get encoder port from DT
   - inno_hdmi: support HDMI for RK3128
   - lvds: error-handling fixes

  ssd130x:
   - support SSD133x plus DT bindings

  tegra:
   - fix error handling

  tilcdc:
   - make use of DRM managed release

  v3d:
   - show memory stats in debugfs
   - Support display MMU page size

  vc4:
   - fix error handling in plane prepare_fb
   - fix framebuffer test in plane helpers

  virtio:
   - add venus capset defines

  vkms:
   - fix OOB access when programming the LUT
   - Kconfig improvements

  vmwgfx:
   - unmap surface before changing plane state
   - fix memory leak in error handling
   - documentation fixes
   - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
   - fix null-pointer deref in execbuf
   - refactor display-mode probing
   - fix fencing for creating cursor MOBs
   - fix cursor-memory lifetime

  xlnx:
   - fix live video input for ZynqMP DPSUB

  lima:
   - fix memory leak

  loongson:
   - fail if no VRAM present

  meson:
   - switch to new drm_bridge_read_edid() interface

  renesas:
   - add RZ/G2L DU support plus DT bindings

  mxsfb:
   - Use managed mode config

  sun4i:
   - HDMI: updates to atomic mode setting

  mediatek:
   - Add display driver for MT8188 VDOSYS1
   - DSI driver cleanups
   - Filter modes according to hardware capability
   - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

  etnaviv:
   - enhancements for NPU and MRT support"

* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
  drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
  drm/amd/pm: wait for completion of the EnableGfxImu message
  drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
  drm/amdgpu: add smu 14.0.1 support
  drm/amdgpu: add VPE 6.1.1 discovery support
  drm/amdgpu/vpe: add VPE 6.1.1 support
  drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
  drm/amdgpu/vpe: add collaborate mode support for VPE
  drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
  drm/amdgpu/vpe: add multi instance VPE support
  drm/amdgpu/discovery: add nbif v6_3_1 ip block
  drm/amdgpu: Add nbif v6_3_1 ip block support
  drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
  drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
  arch/powerpc: Remove <linux/fb.h> from backlight code
  macintosh/via-pmu-backlight: Include <linux/backlight.h>
  fbdev/chipsfb: Include <linux/backlight.h>
  drm/etnaviv: Restore some id values
  drm/amdkfd: make kfd_class constant
  drm/amdgpu: add ring timeout information in devcoredump
  ...
2024-03-13 18:34:05 -07:00
José Roberto de Souza
58480c1c91 drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC
Doing a XE_EXEC with num_batch_buffer == 0 makes signals passed as
argument to be signaled when the last real XE_EXEC is completed.
But to do that it was first pinning all VMAs in drm_gpuvm_exec_lock(),
this patch remove this pinning as it is not required.

This change also help Mesa implementing memory over-commiting recovery
as it needs to unbind not needed VMAs when the whole VM can't fit
in GPU memory but it can only do the unbiding when the last XE_EXEC
is completed.
So with this change Mesa can get the signal it want without getting
out-of-memory errors.

Fixes: eb9702ad29 ("drm/xe: Allow num_batch_buffer / num_binds == 0 in IOCTLs")
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313171318.121066-1-jose.souza@intel.com
2024-03-13 15:46:26 -07:00
Matthew Brost
cf2cbbc76d drm/xe: Use xe_assert in xe_device_assert_mem_access
The implementation of xe_device_assert_mem_access has a non-zero cost.
Use xe_assert rather than XE_WARN_ON so it will compile out in non-debug
kernel builds (Kconfig CONFIG_DRM_XE_DEBUG=n).

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313184430.999397-1-matthew.brost@intel.com
2024-03-13 13:05:41 -07:00
Himal Prasad Ghimiray
023f5c8e90
drm/xe/xe_exec : In xe_exec_ioctl remove deadcode
At label err_unlock_list the condition write_label will never be true.
Remove the deadcode line for write_label true.

Reported by static analyzer.

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313150545.2830408-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-13 16:00:26 -04:00
Himal Prasad Ghimiray
989d07ac6b
drm/xe: Return if kobj creation is failed
Return after warning regarding kobj creation failure.

Fixes: 4ae3aeab32 ("drm/xe: Add vram frequency sysfs attributes")
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313150545.2830408-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-13 16:00:26 -04:00
Shuicheng Lin
e5a95c8c0a drm/xe/xe_tracer: Align fence output format in ftrace log
The fence print in xe_gt_tlb_invalidation_fence and xe_hw_fence
is with "%p", change fence print in xe_sched_job to "%p" also.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313025052.1410833-1-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 12:36:53 -07:00
Lucas De Marchi
bb67dd0225 drm/xe: Group live kunit tests
As was done for the normal kunit tests, group the live tests into a
single module, xe_live_test.ko.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312145158.2295351-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 12:18:39 -07:00
Linus Torvalds
07abb19a9b Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
 
  - Add support for LZ4 compression algorithm to the hibernation image
    creation and loading code (Nikhil V).
 
  - Fix and clean up system suspend statistics collection (Rafael
    Wysocki).
 
  - Simplify device suspend and resume handling in the power management
    core code (Rafael Wysocki).
 
  - Fix PCI hibernation support description (Yiwei Lin).
 
  - Make hibernation take set_memory_ro() return values into account as
    appropriate (Christophe Leroy).
 
  - Set mem_sleep_current during kernel command line setup to avoid an
    ordering issue with handling it (Maulik Shah).
 
  - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
    driver's system suspend callback (Qingliang Li).
 
  - Simplify pm_runtime_get_if_active() usage and add a replacement for
    pm_runtime_put_autosuspend() (Sakari Ailus).
 
  - Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
 
  - Fix section title markdown in the runtime PM documentation (Yiwei
    Lin).
 
  - Enable preferred core support in the amd-pstate cpufreq driver (Meng
    Li).
 
  - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
    min/max limit perf values in amd-pstate always stay within the
    (highest perf, lowest perf) range (Tor Vic, Meng Li).
 
  - Allow intel_pstate to assign model-specific values to strings used in
    the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
    Pandruvada).
 
  - Drop long-unused cpudata::prev_cummulative_iowait from the
    intel_pstate cpufreq driver (Jiri Slaby).
 
  - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
    latter is an inefficient frequency (Shivnandan Kumar).
 
  - Change default transition delay in cpufreq to 2ms (Qais Yousef).
 
  - Remove references to 10ms minimum sampling rate from comments in the
    cpufreq code (Pierre Gondois).
 
  - Honour transition_latency over transition_delay_us in cpufreq (Qais
    Yousef).
 
  - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
 
  - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
    Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
    Belova).
 
  - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
 
  - Make the SCMI cpufreq driver get a transition delay value from
    firmware (Pierre Gondois).
 
  - Prevent the haltpoll cpuidle governor from shrinking guest
    poll_limit_ns below grow_start (Parshuram Sangle).
 
  - Avoid potential overflow in integer multiplication when computing
    cpuidle state parameters (C Cheng).
 
  - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
    driver and in intel_idle to return a correct value for C0 (He
    Rongguang).
 
  - Address multiple issues in the TPMI RAPL driver and add support for
    new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
 
  - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
    Lezcano).
 
  - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
 
  - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
    Norway Ananda).
 
  - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
 
  - Fix a couple of warnings in the OPP core code related to W=1
    builds (Viresh Kumar).
 
  - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
    Kumar).
 
  - Extend dev_pm_opp_data with turbo support (Sibi Sankar).
 
  - dt-bindings: drop maxItems from inner items (David Heidelberg).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmXvI/ISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx24sP/jxg6fOGme8raHQvpTXG3/H56wlGzQ4P
 YUvvKUXnfD3yf1zNISsUl7VQebZqDt8rygkwSdymXlUVZX1eubN0RpCFc0F8GZuc
 THG/YQhYQr/9zro3FpKhfDj5evk21PCQzjf+dGvfQF9qVMxNPG1JzEFK6PnolT5X
 2BvkonY1XFWZjCMbZ83B/jt35lTDb0cmeNbCpfD5UJgcnxmMOtZYpORdyfPWTJpG
 GVCwmAFVVXxXlust/AIpt3mmOpKzSA9GnrtJkhtQe5GN+Y4OjnJiFJmTC7EfCctj
 JlWgVUA716mtFMUrjXgjfI54firF2oQpqaSa2HG/V/A96JWQqjarGz5dAV1IrPEt
 ZmYpvMe4E90S411wF1OWyrEqjXUuDnH1OWUvUdWSt4E7DhFw3esDi/jLW2tyVKAT
 hIy+/O4wzbDSTX/h9Cgt1Qjhew6lKUIwvhEXclB3fuJ+JoviWNkC9lnK93e2H0A3
 VYfkd/lpUD74035l0FrCJ/49MjX9kqrsn+TipHsIlSXAi8ZRdKbVvxOTD8RYudcI
 GvCiDDrkMgNwGlyedgbtTBUepCvSg93b+vVmRj7YMPtBhioOUo3qCn6wpqhxfnth
 9BCnPW7JxqUw/NJdlk9hKumaUZq+MK8G+kdYcIDg6xmAkWSUVP2QKlWavfMCxqRP
 +dN6T2iHsKFe
 =UePT
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "From the functional perspective, the most significant change here is
  the addition of support for Energy Models that can be updated
  dynamically at run time.

  There is also the addition of LZ4 compression support for hibernation,
  the new preferred core support in amd-pstate, new platforms support in
  the Intel RAPL driver, new model-specific EPP handling in intel_pstate
  and more.

  Apart from that, the cpufreq default transition delay is reduced from
  10 ms to 2 ms (along with some related adjustments), the system
  suspend statistics code undergoes a significant rework and there is a
  usual bunch of fixes and code cleanups all over.

  Specifics:

   - Allow the Energy Model to be updated dynamically (Lukasz Luba)

   - Add support for LZ4 compression algorithm to the hibernation image
     creation and loading code (Nikhil V)

   - Fix and clean up system suspend statistics collection (Rafael
     Wysocki)

   - Simplify device suspend and resume handling in the power management
     core code (Rafael Wysocki)

   - Fix PCI hibernation support description (Yiwei Lin)

   - Make hibernation take set_memory_ro() return values into account as
     appropriate (Christophe Leroy)

   - Set mem_sleep_current during kernel command line setup to avoid an
     ordering issue with handling it (Maulik Shah)

   - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
     driver's system suspend callback (Qingliang Li)

   - Simplify pm_runtime_get_if_active() usage and add a replacement for
     pm_runtime_put_autosuspend() (Sakari Ailus)

   - Add a tracepoint for runtime_status changes tracking (Vilas Bhat)

   - Fix section title markdown in the runtime PM documentation (Yiwei
     Lin)

   - Enable preferred core support in the amd-pstate cpufreq driver
     (Meng Li)

   - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
     min/max limit perf values in amd-pstate always stay within the
     (highest perf, lowest perf) range (Tor Vic, Meng Li)

   - Allow intel_pstate to assign model-specific values to strings used
     in the EPP sysfs interface and make it do so on Meteor Lake
     (Srinivas Pandruvada)

   - Drop long-unused cpudata::prev_cummulative_iowait from the
     intel_pstate cpufreq driver (Jiri Slaby)

   - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
     latter is an inefficient frequency (Shivnandan Kumar)

   - Change default transition delay in cpufreq to 2ms (Qais Yousef)

   - Remove references to 10ms minimum sampling rate from comments in
     the cpufreq code (Pierre Gondois)

   - Honour transition_latency over transition_delay_us in cpufreq (Qais
     Yousef)

   - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)

   - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
     Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
     Belova)

   - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)

   - Make the SCMI cpufreq driver get a transition delay value from
     firmware (Pierre Gondois)

   - Prevent the haltpoll cpuidle governor from shrinking guest
     poll_limit_ns below grow_start (Parshuram Sangle)

   - Avoid potential overflow in integer multiplication when computing
     cpuidle state parameters (C Cheng)

   - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
     driver and in intel_idle to return a correct value for C0 (He
     Rongguang)

   - Address multiple issues in the TPMI RAPL driver and add support for
     new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)

   - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
     Lezcano)

   - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)

   - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
     Norway Ananda)

   - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)

   - Fix a couple of warnings in the OPP core code related to W=1 builds
     (Viresh Kumar)

   - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
     Kumar)

   - Extend dev_pm_opp_data with turbo support (Sibi Sankar)

   - dt-bindings: drop maxItems from inner items (David Heidelberg)"

* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
  dt-bindings: opp: drop maxItems from inner items
  OPP: debugfs: Fix warning around icc_get_name()
  OPP: debugfs: Fix warning with W=1 builds
  cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
  OPP: Extend dev_pm_opp_data with turbo support
  Fix cpupower-frequency-info.1 man page typo
  cpufreq: scmi: Set transition_delay_us
  firmware: arm_scmi: Populate fast channel rate_limit
  firmware: arm_scmi: Populate perf commands rate_limit
  cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
  PM: sleep: wakeirq: fix wake irq warning in system suspend
  powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
  cpufreq: Don't unregister cpufreq cooling on CPU hotplug
  PM: suspend: Set mem_sleep_current during kernel command line setup
  cpufreq: Honour transition_latency over transition_delay_us
  cpufreq: Limit resolving a frequency to policy min/max
  Documentation: PM: Fix runtime_pm.rst markdown syntax
  cpufreq: amd-pstate: adjust min/max limit perf
  cpufreq: Remove references to 10ms min sampling rate
  cpufreq: intel_pstate: Update default EPPs for Meteor Lake
  ...
2024-03-13 11:40:06 -07:00
Matthew Brost
521db22a1d drm/xe: Invalidate userptr VMA on page pin fault
Rather than return an error to the user or ban the VM when userptr VMA
page pin fails with -EFAULT, invalidate VMA mappings. This supports the
UMD use case of freeing userptr while still having bindings.

Now that non-faulting VMs can invalidate VMAs, drop the usm prefix for
the tile_invalidated member.

v2:
 - Fix build error (CI)
v3:
 - Don't invalidate VMA if in fault mode, rather kill VM (Thomas)
 - Update commit message with tile_invalidated name chagne (Thomas)
 - Wait VM bookkeep slots with VM resv lock (Thomas)
v4:
 - Move list_del_init(&userptr.repin_link) after error check (Thomas)
 - Assert not in fault mode (Matthew)

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312183907.933835-1-matthew.brost@intel.com
2024-03-13 11:40:03 -07:00
Linus Torvalds
aeb152910a pwm: Changes for v6.9-rc1
This contains the usual amount of driver and device tree changes.
 Additionally there is a big rework of how pwm lowlevel drivers are
 registered to prepare adding character device support.
 
 Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
 Brunet, Raag Jadav and Rafał Miłecki for their contributions. And sorry
 for those who still need some patience because I didn't manage to empty
 my review queue.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmXuyf4ACgkQj4D7WH0S
 /k4Yugf+P7gMPuCQJqWLvOyuHjKt4tI3aVsr+jbSiAfbPWaXAQKZunnZ9K17bOI2
 JQkDuAi76teNRiVtNEx1ZEdfKe9KgY/Npq8BTmvXxvBktCand8sfhyyRaXYo9FWI
 B5qKdp1WIg7ZDMoGQtLRayly4FAsbB0L50SjWmkVIXC2xXp6t6KxxgnOgTM58Oo9
 0yYYetF3EOmDQ4J234/muaLbM+1rjajKdw+SgS2mry2WV60SOqo+PQfuK42XjWip
 cLDkEgYogwx1MAbFgobtquA7Hvkdb2WyCirTDNZiGIBtmM89kH4Oa8e4IDR6FRqn
 w35hJv7sxVjiqBrSMD/lWpJeQ8gPYg==
 =6Ixv
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux

Pull pwm updates from Uwe Kleine-König:
 "This contains the usual amount of driver and device tree changes.
  Additionally there is a big rework of how pwm lowlevel drivers are
  registered to prepare adding character device support.

  Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
  Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
  sorry for those who still need some patience because I didn't manage
  to empty my review queue"

* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
  pwm: imx-tpm: fix probe crash due to access registers without clock
  pwm: meson: generalize 4 inputs clock on meson8 pwm type
  dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
  dt-bindings: pwm: amlogic: fix s4 bindings
  pwm: dwc: simplify error handling
  pwm: dwc: Add 16 channel support for Intel Elkhart Lake
  pwm: dwc: drop redundant error check
  staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
  staging: greybus: pwm: Rework how the number of PWM lines is determined
  staging: greybus: pwm: Drop unused gb_connection_set_data()
  staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
  staging: greybus: pwm: Make use of pwmchip_parent() accessor
  staging: greybus: pwm: Change prototype of helpers to prepare further changes
  leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
  drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
  gpio: mvebu: Make use of devm_pwmchip_alloc() function
  pwm: xilinx: Make use of devm_pwmchip_alloc() function
  pwm: xilinx: Prepare removing pwm_chip from driver data
  pwm: vt8500: Make use of devm_pwmchip_alloc() function
  ...
2024-03-13 10:51:39 -07:00
Jérémie Dautheribes
751b584182 drm/panel: simple: add CMT430B19N00 LCD panel support
Add support for Crystal Clear Technology CMT430B19N00 4.3" 480x272
TFT-LCD panel.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240313172016.387277-4-jeremie.dautheribes@bootlin.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313172016.387277-4-jeremie.dautheribes@bootlin.com
2024-03-13 18:33:32 +01:00
Janusz Krzysztofik
71b2187714 drm/i915/hwmon: Fix locking inversion in sysfs getter
In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an
rpm wakeref.  That results in lock inversion:

<4> [197.079335] ======================================================
<4> [197.085473] WARNING: possible circular locking dependency detected
<4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted
<4> [197.098096] ------------------------------------------------------
<4> [197.104231] prometheus-node/839 is trying to acquire lock:
<4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350
<4> [197.116939]
but task is already holding lock:
<4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915]
<4> [197.131543]
which lock already depends on the new lock.
...
<4> [197.507922] Chain exists of:
  fs_reclaim --> &gt->reset.mutex --> &hwmon->hwmon_lock
<4> [197.518528]  Possible unsafe locking scenario:
<4> [197.524411]        CPU0                    CPU1
<4> [197.528916]        ----                    ----
<4> [197.533418]   lock(&hwmon->hwmon_lock);
<4> [197.537237]                                lock(&gt->reset.mutex);
<4> [197.543376]                                lock(&hwmon->hwmon_lock);
<4> [197.549682]   lock(fs_reclaim);
...
<4> [197.632548] Call Trace:
<4> [197.634990]  <TASK>
<4> [197.637088]  dump_stack_lvl+0x64/0xb0
<4> [197.640738]  check_noncircular+0x15e/0x180
<4> [197.652968]  check_prev_add+0xe9/0xce0
<4> [197.656705]  __lock_acquire+0x179f/0x2300
<4> [197.660694]  lock_acquire+0xd8/0x2d0
<4> [197.673009]  fs_reclaim_acquire+0xa1/0xd0
<4> [197.680478]  __kmalloc+0x9a/0x350
<4> [197.689063]  acpi_ns_internalize_name.part.0+0x4a/0xb0
<4> [197.694170]  acpi_ns_get_node_unlocked+0x60/0xf0
<4> [197.720608]  acpi_ns_get_node+0x3b/0x60
<4> [197.724428]  acpi_get_handle+0x57/0xb0
<4> [197.728164]  acpi_has_method+0x20/0x50
<4> [197.731896]  acpi_pci_set_power_state+0x43/0x120
<4> [197.736485]  pci_power_up+0x24/0x1c0
<4> [197.740047]  pci_pm_default_resume_early+0x9/0x30
<4> [197.744725]  pci_pm_runtime_resume+0x2d/0x90
<4> [197.753911]  __rpm_callback+0x3c/0x110
<4> [197.762586]  rpm_callback+0x58/0x70
<4> [197.766064]  rpm_resume+0x51e/0x730
<4> [197.769542]  rpm_resume+0x267/0x730
<4> [197.773020]  rpm_resume+0x267/0x730
<4> [197.776498]  rpm_resume+0x267/0x730
<4> [197.779974]  __pm_runtime_resume+0x49/0x90
<4> [197.784055]  __intel_runtime_pm_get+0x19/0xa0 [i915]
<4> [197.789070]  hwm_energy+0x55/0x100 [i915]
<4> [197.793183]  hwm_read+0x9a/0x310 [i915]
<4> [197.797124]  hwmon_attr_show+0x36/0x120
<4> [197.800946]  dev_attr_show+0x15/0x60
<4> [197.804509]  sysfs_kf_seq_show+0xb5/0x100

Acquire the wakeref before the lock and hold it as long as the lock is
also held.  Follow that pattern across the whole source file where similar
lock inversion can happen.

v2: Keep hardware read under the lock so the whole operation of updating
    energy from hardware is still atomic (Guenter),
  - instead, acquire the rpm wakeref before the lock and hold it as long
    as the lock is held,
  - use the same aproach for other similar places across the i915_hwmon.c
    source file (Rodrigo).

Fixes: 1b44019a93 ("drm/i915/guc: Disable PL1 power limit when loading GuC firmware")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> # v6.5+
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311203500.518675-2-janusz.krzysztofik@linux.intel.com
2024-03-13 15:09:04 +01:00
Nirmoy Das
8d4ba9fc1c drm/i915/selftests: Pick correct caching mode.
Caching mode is HW dependent so pick a correct one using
intel_gt_coherent_map_type().

Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10249
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312111815.18083-1-nirmoy.das@intel.com
2024-03-13 14:41:54 +01:00
Balasubramani Vivekanandan
79263e4b3f drm/xe/lnl: Enable display support
Enable display support for Lunar Lake.

Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-9-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:46 -07:00
Balasubramani Vivekanandan
bf1a72ab5a drm/i915/xe2lpd: Load DMC
Load DMC for Xe2LPD. The value 0x8000 is the maximum payload size for
any Xe2LPD DMC firmware.

v2:
  - s/XE2LPD_MAX_FW_SIZE/XE2LPD_DMC_MAX_FW_SIZE/. (Lucas)

Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-8-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:46 -07:00
Gustavo Sousa
c834a080a0 drm/i915/xe2lpd: Support MDCLK:CDCLK ratio changes
Commit 394b4b7df9 ("drm/i915/lnl: Add CDCLK table") and commit
3d3696c0fe ("drm/i915/lnl: Start using CDCLK through PLL") started
adding support for CDCLK programming support for Xe2LPD. One final piece
is missing, which is the programming necessary for changed in the ratio
between MDCLK and CDCLK. Let's do that now.

BSpec instructs us to update MBUS_CTL and DBUF_CTL_S* registers when the
ratio between MDCLK and CDCLK changes. The updates must be done before
changing the CDCLK when decreasing the frequency; or after it when
increasing the frequency.

Ratio-related updates to MBUS_CTL also depend on the state of MBus
joining, so they are performed by either CDCLK change sequence or by
changes in MBus joining. Since one might happen independently of the
other, we need to make sure that both logics see the necessary state
values when programming that register. MBus joining logic needs to know
the MDCLK:CDCLK ratio and that's already provided via mdclk_cdclk_ratio
field of struct intel_dbuf_state.

For the CDCLK logic, we need to have something similar: we need to
propagate the status of MBus joining to struct intel_cdclk_state. Do
that by adding the field joined_mbus to struct intel_cdclk_config.
(Preferably, that field would be added to intel_cdclk_state, however
currently only intel_cdclk_config is passed down to the functions that
do the register programming. We might revisit this decision if we find
that refactoring the code to pass the whole intel_cdclk_state is worth
it.)

Bspec: 68864, 68868, 69090, 69482
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-7-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:46 -07:00
Gustavo Sousa
9161e31181 drm/i915: Add mdclk_cdclk_ratio to intel_dbuf_state
Xe2LPD always selects the CDCLK PLL as source for the MDCLK. Because of
that, the ratio between MDCLK and CDCLK is not be constant anymore. As
such, make sure to have the current ratio available in intel_dbuf_state
so that it can be used during dbuf programming.

Note that we write-lock the global state instead of serializing to a
hardware commit because a change in the ratio should be rather handled
in the CDCLK change sequence, which will need to take care of updating
the necessary registers in that case. We will implement that in upcoming
changes.

That said, changes in the MBus joining state should be handled by the
DBUF/MBUS logic, just like it is already done, but the logic will need
to know the ratio to properly update the registers.

v2:
  - Make first sentence of commit message more intelligible. (Matt)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-6-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:45 -07:00
Gustavo Sousa
66a0e06813 drm/i915: Extract intel_dbuf_mdclk_cdclk_ratio_update()
As of Xe2LPD, it is now possible to select the source of the MDCLK
as either the CD2XCLK or the CDCLK PLL.

Previous display IPs were hardcoded to use the CD2XCLK. For those, the
ratio between MDCLK and CDCLK remained constant, namely 2. For Xe2LPD,
when we select the CDCLK PLL as the source, the ratio will vary
according to the squashing configuration (since the cd2x divisor is
fixed for all supported configurations).

To help the transition to supporting changes in the ratio, extract the
function intel_dbuf_mdclk_cdclk_ratio_update() from the existing logic
and call it using 2 as hardcoded ratio. Upcoming changes will use that
function for updates in the ratio due to CDCLK changes.

Bspec: 50057, 69445, 49213, 68868
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-5-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:45 -07:00
Gustavo Sousa
452269e2f0 drm/i915/cdclk: Only compute squash waveform when necessary
It is no use computing the squash waveform if we are not going to use
it. Move the call to cdclk_squash_waveform() inside the block guarded by
HAS_CDCLK_SQUASH(dev_priv).

v2:
  - Move "u16 waveform" declaration to inside the block where it is
    initialized and used. (Matt)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-4-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:45 -07:00
Gustavo Sousa
5372a54d7a drm/i915/cdclk: Add and use mdclk_source_is_cdclk_pll()
Currently, only Xe2LPD uses CDCLK PLL as the source of MDCLK and
previous display IPs use the CD2XCLK. There will be changes in code
paths common to those platforms that will rely on which source is being
used. As such, let's make that information explicit with the addition of
the predicate function mdclk_source_is_cdclk_pll().

Arguably, an enum could be created, but using a boolean should suffice
here, since we there are only two possible sources and the logic that
will rely on it will be very localized.

In order to get the code into a more consistent state, let's also take
this opportunity to hook the selection of CDCLK_CTL's "MDCLK Source
Select" to that new function. Even though currently only
MDCLK_SOURCE_SEL_CDCLK_PLL will be returned, having this extra logic is
arguably better than keeping stuff untied and prone to bugs.

v2:
  - Extract mdclk_source_is_cdclk_pll() out of xe2lpd_mdclk_source_sel()
    to make latter only about the register's field.

Bspec: 69090, 68861
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-3-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:46:23 -07:00
Gustavo Sousa
dfdfc609bb drm/i915/cdclk: Rename lnl_cdclk_table to xe2lpd_cdclk_table
The CDCLK table is tied to Xe2LPD display and not to the platform. Let's
rename lnl_cdclk_table to xe2lpd_cdclk_table in order to reflect that.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-2-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-13 05:45:11 -07:00
Jani Nikula
9dd81b2e1e drm/exynos: simplify the return value handling in exynos_dp_get_modes()
Just use 0 and 1 directly, instead of the confusing local variable
that's always set to 0.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64cc680f14d961cedb726a6fd5c6dfd53ca9bb85.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
b43a72c4f3 drm/bridge: lt9611uxc: use int for holding number of modes
lt9611uxc_connector_get_modes() propagates the return value of
drm_edid_connector_add_modes() but stores the int temporarily in an
unsigned int. Use the correct type.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ed97f4f036263cdc4f34330cef91214970f99a77.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
abf493988e drm/vc4: hdmi: do not return negative values from .get_modes()
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/dcda6d4003e2c6192987916b35c7304732800e08.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
c2da9ada64 drm/imx/ipuv3: do not return negative values from .get_modes()
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/311f6eec96d47949b16a670529f4d89fcd97aefa.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
171b711b26 drm/bridge: lt8912b: do not return negative values from .get_modes()
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/dcdddcbcb64b6f6cdc55022ee50c10dee8ddbc3d.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
13d5b04036 drm/exynos: do not return negative values from .get_modes()
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/d8665f620d9c252aa7d5a4811ff6b16e773903a2.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
fc4e977265 drm/panel: do not return negative error codes from drm_panel_get_modes()
None of the callers of drm_panel_get_modes() expect it to return
negative error codes. Either they propagate the return value in their
struct drm_connector_helper_funcs .get_modes() hook (which is also not
supposed to return negative codes), or add it to other counts leading to
bogus values.

On the other hand, many of the struct drm_panel_funcs .get_modes() hooks
do return negative error codes, so handle them gracefully instead of
propagating further.

Return 0 for no modes, whatever the reason.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79f559b72d8c493940417304e222a4b04dfa19c4.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Jani Nikula
7af03e6887 drm/probe-helper: warn about negative .get_modes()
The .get_modes() callback is supposed to return the number of modes,
never a negative error code. If a negative value is returned, it'll just
be interpreted as a negative count, and added to previous calculations.

Document the rules, but handle the negative values gracefully with an
error message.

Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/50208c866facc33226a3c77b82bb96aeef8ef310.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-13 10:44:14 +02:00
Thomas Zimmermann
a2e7496b45 Merge drm/drm-fixes into drm-misc-fixes
Backmerging to sync before merging the patchset at [1].

[1] https://lore.kernel.org/all/cover.1709913674.git.jani.nikula@intel.com/

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-03-13 09:43:21 +01:00