If the drm/msm init code gets an error during output modeset
initialisation, the kernel will report an error regarding DRM memory
manager not being clean during shutdown. This is because
msm_dsi_modeset_init() allocates a piece of GEM memory for the TX
buffer, but destruction of the buffer happens only at
msm_dsi_host_destroy(), which is called during DSI driver's remove()
time, much later than the DRM MM shutdown.
To solve this issue, move the TX buffer destruction to dsi_unbind(), so
that the buffer is destructed at the correct time. Note, we also have to
store a reference to the address space, because priv->kms->aspace is
cleared before components are unbound.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Fixes: 8f59ee9a57 ("drm/msm/dsi: Adjust probe order")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562238/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use exiting function to free the allocated GEM object instead of
open-coding it. This has a bonus of internally calling
msm_gem_put_vaddr() to compensate for msm_gem_get_vaddr() in
msm_get_kernel_new().
Fixes: 1e29dff004 ("drm/msm: Add a common function to free kernel buffer objects")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/562239/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The previous patches converted all users of the DSC DPCD caps to look
these up from the connector, so remove the version stored in intel_dp.
A follow-up patchset will read out the MST connector specific
capabilities in intel_dp_add_mst_connector() ->
intel_dp_mst_read_decompression_port_dsc_caps().
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in the patchset.
v3:
- Rebased on read-out fix for eDP in the patchset.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-3-imre.deak@intel.com
Use the connector's DSC DPCD capabilities in intel_dp_dsc_compute_max_bpp()
instead of the version stored in the encoder.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-7-imre.deak@intel.com
Use the connector's DSC DPCD capabilities in i915_dsc_fec_support_show()
instead of the version stored in the encoder. Atm the two are identical,
but a follow-up patch will store the (MST) connector specific version
in the connector.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-6-imre.deak@intel.com
Cache the i915 specific device and connector pointers in
i915_dsc_fec_support_show().
v2:
- s/Cahce/Cache typo in commit log. (Stan)
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-5-imre.deak@intel.com
Similarly to eDP and SST-DP connectors read out the DSC capabilities for
MST connectors as well. Atm these will match the root port's DSC caps
and only used after a follow-up change enables the decompression for
each stream separately (vs. the current way of enabling it only globally
in the first branch device downstream of the root port).
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010112504.2156789-3-imre.deak@intel.com
In an MST topology the DSC capabilities are specific to each connector,
retrieved either from the sink if it decompresses the stream, or from a
branch device between the source and the sink in case this branch device
does the decompression. Accordingly each connector needs to cache its
own DSC DPCD and FEC capabilities, along with the AUX device through
which the decompression can be enabled. This patch prepares for that by
storing the capabilities and the DSC AUX device in the connector, for
now these just matching the version stored in intel_dp. The follow-up
patches will convert all users to look up these in the connector instead
of intel_dp, after which the intel_dp copies are removed.
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in previous patch.
v3:
- Rebased on read-out fix for eDP in previous patch.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-2-imre.deak@intel.com
Check only the eDP or the DP specific DPCD revision depending on the
sink type. Pass the corresponding revision to the function, which allows
getting the DSC caps of a branch device (in an MST topology, which has
its own DPCD and so DPCD revision).
While at it use DP_DPCD_REV_14 instead of open coding it and for clarity
add a separate function to read out the DSC capability on eDP.
v2:
- Use DP_DPCD_REV_14 instead of open coding it. (Stan)
- Check EDP_DCPD_REV/DPCD_REV in a clearer way. (Ville)
v3:
- Fix the read-out for eDP in intel_dp_detect().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-1-imre.deak@intel.com
The "ret" variable is declared as ssize_t and it can hold negative error
codes but the "rk_obj->base.size" variable is type size_t. This means
that when we compare them, they are both type promoted to size_t and the
negative error code becomes a high unsigned value and is treated as
success. Add a cast to fix this.
Fixes: 38f993b7c5 ("drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/2bfa28b5-145d-4b9e-a18a-98819dd686ce@moroto.mountain
With the current cleanup flow, we could trigger a NULL pointer
dereference if there is a delayed destruction of a BO with a
system resource that gets executed on drain_workqueue() call,
as we attempt to free a resource using an already released
resource manager.
Remove the device from the device list and drain its workqueue
before releasing the system domain manager in ttm_device_fini().
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Add DT support, by:
1. Creating a panel bridge from DT, and attaching it to the encoder,
2. Replacing the custom connector with a bridge connector,
3. Obtaining clock configuration based on the compatible value.
Note that for now the driver uses a fixed clock configuration selecting
the bus clock, as the current code to select other clock inputs needs
changes to support any other SoCs than SH7724.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6185ab76aa300fa402e4f6610b2109665f2d8a1c.1694767209.git.geert+renesas@glider.be
Now the suspend/resume methods no longer need to look at internal driver
state, the dpms and started fields in the shmob_drm_crtc structure can
be removed, as well as the shmob_drm_crtc_dpms() wrapper. After this,
shmob_drm_crtc_atomic_{en,dis}able() became just wrappers around
shmob_drm_crtc_st{art,op}(), so inline the latter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/905b9ca72f43d40438c8cb1199cde140eb123204.1694767209.git.geert+renesas@glider.be
Implement atomic mode setting for both the primary and overlay planes.
This involves:
- Moving the primary plane handling code from CRTC mode setting to
plane handling shared by primary and overlay planes,
- Adding basic CRTC and mode config atomic mode setting ops, which
don't do much yet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a6b698a1c8c1eaf631c2f928f5888ab5fe7aa4c3.1694767209.git.geert+renesas@glider.be
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.
Implement this using the drm_crtc_vblank_{on,off}() helpers.
Note that drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. This is performed at CRTC creation time, requiring vertical
blank initialization to be moved before creating CRTCs.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e5833e5706b7792bfca8e6e56fc154a7c3e0574f.1694767209.git.geert+renesas@glider.be
Turning a CRTC off will prevent a queued page flip from ever completing,
potentially confusing userspace. Wait for queued page flips to complete
before turning the CRTC off to avoid this.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c97d5859c43fa36043c61de28d67688ebe345092.1694767209.git.geert+renesas@glider.be
Move legacy interface handling to the connector setup code.
Set up bus_flags and bus_formats in display_info according to the
bus format and panel information from platform data, to make it more
similar with DT-based connector/bridge/panel setup.
This will allow us to use the same LCD interface setup code for both
legacy and DT-based systems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/912f615eb87c847804a268200ab57c63453c65d4.1694767209.git.geert+renesas@glider.be
Replace the drm_mode_modeinfo field with videomode that includes more
signal polarity flags. This simplifies driver handling of panel modes
and prepares for DT support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Simplify]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4312e56de424d94399c6105e7159317eae86c9d5.1694767209.git.geert+renesas@glider.be
Now that drm_device is embedded in shmob_drm_device, we can use
a container_of()-based helper to get the shmob_drm_device pointer from
the drm_device, instead of using the deprecated drm_device.dev_private
field.
While at it, restore reverse Xmas tree ordering of local variable
declarations.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8ef4be8bffe75efc7f4b66f3732ec357f7d43e0f.1694767209.git.geert+renesas@glider.be
There is no need to call drm_plane_force_disable() from the plane's
.destroy() callback, as the plane should have been disabled already
before. See also commit 3c858a3385 ("drm/plane_helper: don't
disable plane in destroy function") for the generic plane helper case.
After removing this call, shmob_drm_plane_destroy() becomes a simple
wrapper around shmob_drm_plane_destroy(), hence replace it by the
latter.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8d7a3f250612085fdf4e06d377843e8f874b22d9.1694767209.git.geert+renesas@glider.be