intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
Link: https://lore.kernel.org/all/3626411dc9e556452c432d0919821b76d9991217@intel.com
Link: https://lore.kernel.org/all/20260228130946.50919-2-ltao@redhat.com
Fixes: 88c1f9a4d3 ("drm/i915/dmc: Create debugfs entry for dc6 counter")
Cc: Mohammed Thasleem <mohammed.thasleem@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: <stable@vger.kernel.org> # v6.16+
Tested-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260309164803.1918158-1-imre.deak@intel.com
(cherry picked from commit 2344b93af8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCabMItwAKCRC93/aFa7yZ
2BiwAQD3yQsA6xuspaMXduQwFE0tu6rL6bB+NSB7bfM2YYdE1AEAqi2GQPOlfohH
DK/zb58ZPoeJfCdShPPQ85cSkPSu2wY=
=OtzL
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-12:
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260312184425.3875669-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
When drm_atomic_add_affected_planes() adds a plane to the atomic
state, the associated colorops are not guaranteed to be included.
This can leave colorop state out of the transaction when planes
are pulled in implicitly (eg. during modeset or internal commits).
Also add affected colorops when adding affected planes to keep
plane and color pipeline state consistent within the atomic
transaction.
v2: Add affected colorops only when a pipeline is enabled
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Cc: <stable@vger.kernel.org> #v6.19+
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260310113238.3495981-3-chaitanya.kumar.borah@intel.com
__drm_atomic_helper_colorop_duplicate_state() unconditionally
sets state->bypass = true after copying the existing state.
This override causes the new atomic state to no longer reflect
the currently committed hardware state. Since the bypass property
directly controls whether the colorop is active in hardware,
resetting it to true can inadvertently disable an active colorop
during a subsequent commit, particularly for internal driver commits
where userspace does not touch the property.
Drop the unconditional assignment and preserve the duplicated
bypass value.
Fixes: 8c5ea1745f ("drm/colorop: Add BYPASS property")
Cc: <stable@vger.kernel.org> #v6.19+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260310113238.3495981-2-chaitanya.kumar.borah@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmm3G/UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZJUH/R0vQ3Vha48QDEic
1NREwaHxAoTFi0i3y7OPPklqrP2V09D1qg4Q6fExYQVTQgV6F2DRjVbyPKrmr4ay
BA6aHrUdnFngYHpDlI1b1r7rJiAIN4WFHl7StO70bS+EB+UPsP9cfP3CKXUfKfqT
kyHXzUrd5QnjYmlb9rQw1E6rzsRamNtGUtZf7TwDidJYjtm3sPeDHUkjyRy4xkYd
UouIu6W7UXoicl38bJAgaWBY5BiYtjN6ktnY4/gcqDeqYd7mTM3Eb1B+OSXgFfip
F0OYfJhfWn+63WnPA+1I5jXWC1UrdVXTMK/NTYjhmGlfdmkLcWDlNGtu+qKZbpwj
fmF3Kyo=
=6nX1
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc4' into drm-rust-next
We need the latest fixes from drm-rust-fixes in drm-rust-next as well to
build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Commit 4636ce93d5 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260309165635.1138413-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Three clocks are not being released in devm_regmap_init_mmio() error
path.
Add proper goto and set ret to the error code.
Fixes: 8270249fbe ("drm/sun4i: backend: Create regmap after access is possible")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260226163836.10335-1-ethantidmore06@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The lt8713sx is a Type-C/DP1.4 to DP1.4/HDMI2.0 converter,
with three configurable DP1.4/HDMI2.0/DP++ output interfaces and
audio output interface.
Driver is required for firmware upgrade and enabling the bridge chip.
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Simon Zhu <xmzhu@lontium.corp-partner.google.com>
Link: https://patch.msgid.link/20260303-lt8713sx-bridge-driver-v5-2-6cc2a855aafa@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This enables support for Transparent Huge Pages (THP) for device pages by
using MIGRATE_VMA_SELECT_COMPOUND during migration. It removes the need to
split folios and loop multiple times over all pages to perform required
operations at page level. Instead, we rely on newly introduced support for
higher orders in drm_pagemap and folio-level API.
In Xe, this drastically improves performance when using SVM. The GT stats
below collected after a 2MB page fault show overall servicing is more than
7 times faster, and thanks to reduced CPU overhead the time spent on the
actual copy goes from 23% without THP to 80% with THP:
Without THP:
svm_2M_pagefault_us: 966
svm_2M_migrate_us: 942
svm_2M_device_copy_us: 223
svm_2M_get_pages_us: 9
svm_2M_bind_us: 10
With THP:
svm_2M_pagefault_us: 132
svm_2M_migrate_us: 128
svm_2M_device_copy_us: 106
svm_2M_get_pages_us: 1
svm_2M_bind_us: 2
v2:
- Fix one occurrence of drm_pagemap_get_devmem_page() (Matthew Brost)
v3:
- Remove migrate_device_split_page() and folio_split_lock, instead rely on
free_zone_device_folio() to split folios before freeing (Matthew Brost)
- Assert folio order is HPAGE_PMD_ORDER (Matthew Brost)
- Always use folio_set_zone_device_data() in split (Matthew Brost)
v4:
- Warn on compound device page, s/continue/goto next/ (Matthew Brost)
v5:
- Revert warn on compound device page
- s/zone_device_page_init()/zone_device_folio_init() (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-5-francois.dugast@intel.com
cpages returned from migrate_vma_setup represents the total number of
individual pages found, not the number of 4K pages. The math in
drm_pagemap_migrate_to_devmem for npages is based on the number of 4K
pages, so cpages != npages can fail even if the entire memory range is
found in migrate_vma_setup (e.g., when a single 2M page is found).
Add drm_pagemap_cpages, which converts cpages to the number of 4K pages
found.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-4-francois.dugast@intel.com
This new helper helps ensure all accesses to zone_device_data use the
correct API whether the page is part of a folio or not.
v2:
- Move to drm_pagemap.h, stick to folio_zone_device_data (Matthew Brost)
- Return struct drm_pagemap_zdd * (Matthew Brost)
v3:
- Add stub for !CONFIG_ZONE_DEVICE (CI)
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-3-francois.dugast@intel.com
If the page is part of a folio, unlock and put the whole folio at once
instead of individual pages one after the other. This will reduce the
amount of operations once device THP are in use.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-2-francois.dugast@intel.com
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
Cc: stable@vger.kernel.org
Fixes: 919bb54e98 ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-8-zhanjun.dong@intel.com
If the firmware fails to load in GT resets the device is wedged also
initiating a GuC state cleanup.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-7-zhanjun.dong@intel.com
The GuC CT state transition requires moving to the STOP state before
entering the DISABLED state. Update the driver teardown sequence to make
the proper state machine transitions.
Fixes: ee4b32220a ("drm/xe/guc: Add devm release action to safely tear down CT")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-6-zhanjun.dong@intel.com
Replace the magic number 2 with the proper enum value
XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET for better code readability
and maintainability.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-5-zhanjun.dong@intel.com
The intent of wedging a device is to allow queues to continue running
only in wedged mode 2. In other modes, queues should initiate cleanup
and signal all remaining fences. Fix xe_guc_submit_wedge to correctly
clean up queues when wedge mode != 2.
Fixes: 7dbe8af13c ("drm/xe: Wedge the entire device")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-4-zhanjun.dong@intel.com
In GuC submit fini, forcefully tear down any exec queues by disabling
CTs, stopping the scheduler (which cleans up lost G2H), killing all
remaining queues, and resuming scheduling to allow any remaining cleanup
actions to complete and signal any remaining fences.
Split guc_submit_fini into device related and software only part. Using
device-managed and drm-managed action guarantees the correct ordering of
cleanup.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-3-zhanjun.dong@intel.com
xe_guc_submit_pause_abort is intended to be called after something
disastrous occurs (e.g., VF migration fails, device wedging, or driver
unload) and should immediately trigger the teardown of remaining
submission state. With that, kill any remaining queues in this function.
Fixes: 7c4b7e34c8 ("drm/xe/vf: Abort VF post migration recovery on failure")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-2-zhanjun.dong@intel.com
Commit adefb2ccea ("drm/v3d: create a dedicated lock for dma fence")
split `fence_lock` from `queue_lock` because v3d_job_update_stats() was
taking `queue_lock` to protect `job->file_priv` during stats collection
in the IRQ handler. Using the same lock for both DMA fence signaling and
stats protection in a IRQ context caused issues on PREEMPT_RT.
Since then, the stats infrastructure has been reworked: v3d_stats is now
refcounted and jobs hold their own references to stats objects, so
v3d_job_update_stats() no longer takes `queue_lock` at all.
With the original reason for the split gone, merge `fence_lock` back
into `queue_lock` to simplify the locking scheme.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-6-49864fe00692@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
To remove the file_priv NULL-ing dance needed to check if the file
descriptor is open, move the per-fd reset counter into v3d_stats, which
is heap-allocated and refcounted, outliving the fd as long as jobs
reference it.
This change allows the removal of the last `queue_lock` usage to protect
`job->file_priv` and avoids possible NULL ptr dereference issues due to
lifetime mismatches.
Also, to simplify locking, replace both the global and per-fd locked
reset counters with atomics.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-5-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Have each job hold its own references to the per-fd and global stats
objects. This eliminates the need for `queue_lock` protection in the
stats update path, since the job's stats pointers are guaranteed to
remain valid for the job's entire lifetime regardless of file descriptor
closure.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-4-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Convert `v3d_stats` from embedded structs to heap-allocated, refcounted
objects. This decouples the stats lifetime from the containing
structures (this is, `v3d_queue_state` and `v3d_file_priv`), allowing
jobs to safely hold their own references to stats objects even after the
file descriptor is closed.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-3-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The `v3d_stats` sequence counter uses regular seqcount helpers, which
carry lockdep annotations that expect a consistent IRQ context between
all writers. However, lockdep is unable to detect that v3d's readers
are never in IRQ or softirq context, and that for CPU job queues, even
the write side never is. This led to false positive that were previously
worked around by conditionally disabling local IRQs under
IS_ENABLED(CONFIG_LOCKDEP).
Switch to the raw seqcount helpers which skip lockdep tracking entirely.
This is safe because jobs are fully serialized per queue: the next job
can only be queued after the previous one has been signaled, so there is
no scope for the start and update paths to race on the same seqcount.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-2-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
drm_sched_entity_init() can fail but its return value is currently being
ignored in v3d_open(). Check the return value and properly unwind
on failure by destroying any already-initialized scheduler entities.
Fixes: 57692c94dc ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-1-49864fe00692@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5.
Fixes: cfc27680ee ("drm/colorop: Introduce new drm_colorop mode object")
Cc: Simon Ser <contact@emersion.fr>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> #v6.19+
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20260312204145.829714-1-harry.wentland@amd.com
By using the same variable for both the return of poll_timeout_us and
the return of the polled function guc_wait_ucode, the return value of
the latter is overwritten and lost after exiting the polling loop. Since
guc_wait_ucode returns -1 on GuC load failure, we lose that information
and always continue as if the GuC had been loaded correctly.
This is fixed by simply using 2 separate variables.
Fixes: a4916b4da4 ("drm/xe/guc: Refactor GuC load to use poll_timeout_us()")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260303001732.2540493-2-daniele.ceraolospurio@intel.com
The ACPI_AC_CLASS symbol is defined in several places in the same way
which is rather unfortunate.
Instead, define it in one common header file (acpi_bus.h) so that it is
accessible to all of its users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/6163384.MhkbZ0Pkbq@rafael.j.wysocki
Convert the driver to use the non-deprecated mipi_dsi_*_multi() helpers and
mipi_dsi_msleep().
Switch DCS command sequences to the multi context API and
accumulate errors via struct mipi_dsi_multi_context. Replace
open-coded error handling with the multi helpers and convert
nt36672a_send_cmds() and power sequencing accordingly.
This patch is intended to functionally be a no-op, though there is one
slight change. Previously a failure in regulator_bulk_disable() would
have caused nt36672a_panel_unprepare() to return an error. Now it
won't. No other errors in nt36672a_panel_unprepare() were propagated,
so this makes things consistent.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260305044921.10942-1-chintanlike@gmail.com
The IPUv3 overlay plane may be placed over or under the primary plane.
Set the zpos of the primary to an immutable position of 1 to have the
possibility to place the other plane underneath it.
Set the zpos of other planes (the overlay plane) to a mutable value
between 0 (the lowest possible value of a zpos) and directly above the
primary plane with the latter being the default.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260219-drm-imx-underlay-plane-v2-2-26ef829c5483@pengutronix.de
The overlay plane may be placed over or under the primary plane. Using
zpos to determine, if the plane is the primary or overlay plane is not
valid anymore.
Use the plane type for determining the name of the plane in the error
message.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260219-drm-imx-underlay-plane-v2-1-26ef829c5483@pengutronix.de
When I build for an old imx53 platform I see the same as the test robot
saw before:
arm-buildroot-linux-gnueabihf-ld: drivers/gpu/drm/imx/ipuv3/parallel-display.o: in function `imx_pd_bind':
parallel-display.c:(.text+0xb8): undefined reference to `drm_bridge_connector_init'
Selecting DRM_DISPLAY_HELPER for DRM_IMX_PARALLEL_DISPLAY fixes the build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512241721.jZgcwRfr-lkp@intel.com/
Signed-off-by: Martin Kepplinger-Novakovic <martin.kepplinger-novakovic@ginzinger.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260121102607.4087362-1-martin.kepplinger-novakovic@ginzinger.com
Prefer bus format set via legacy "interface-pix-fmt" DT property
over panel bus format. This is necessary to retain support for
DTs which configure the IPUv3 parallel output as 24bit DPI, but
connect 18bit DPI panels to it with hardware swizzling.
This used to work up to Linux 6.12, but stopped working in 6.13,
reinstate the behavior to support old DTs.
Cc: stable@vger.kernel.org
Fixes: 5f6e56d331 ("drm/imx: parallel-display: switch to drm_panel_bridge")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260110171510.692666-1-marex@nabladev.com
Since both the DP SST and MST HPD IRQ handlers call
intel_dp_handle_link_service_irq() with LINK_STATUS_CHANGED set in
irq_mask if intel_dp->link.force_retrain is set, checking for the former
flag is sufficient to determine if the link status needs to be checked
(which includes retraining the link if this is forced); remove checking
for the latter flag.
Since LINK_STATUS_CHANGED is currently set unconditionally for DP SST,
extend the related comment to note that it must be set if
intel_dp->link.force_retrain is set (in case setting LINK_STATUS_CHANGED
becomes conditional on DPCD_REV).
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260311153152.133744-2-imre.deak@intel.com
Handling of a forced link retraining debugfs request via the DP MST HPD
IRQ handler is incorrectly skipped, if the IRQ handler doesn't see any
HPD IRQs raised by the sink. Fix this by ensuring that the request is
always handled (in the Fixes: commit below by directly calling
intel_dp_check_link_state(), later by the same call moved to
intel_dp_handle_link_service_irq()).
Cc: Luca Coelho <luciano.coelho@intel.com>
Fixes: db4855d903 ("drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler")
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260311153152.133744-1-imre.deak@intel.com
During intel_hdcp_check_link phase we need to take into account
if we are currently forcing HDCP 1.4 or not. This is because
we check for HDCP 2.x Link first and only if HDCP 2.x is not being
used check for HDCP 1.4. With force_hdcp14 in picture we should not
be going into intel_hdcp2_check_link because of which we may end
up trying to disable HDCP2.x even if HDCP 1.4 was enabled causing
a lot of issues while IGT tests this.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260225065045.3040787-1-suraj.kandpal@intel.com
gud, two timings fixes for ti-sn65dsi83, an initialization fix for ivpu,
and a runtime suspend deadlock fix for amdxdna.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCabJrhgAKCRAnX84Zoj2+
dpnvAX0YM7aOCD/v6zqppgMP3A3eEnETvaZON18Et+g0MHjg7lp1VHTMMw95AEpJ
93QZt0IBgNyvx39PVrontGciEZ/EJH9gp1UKKu3R3Prg12dJFASNdVJD9FnYiHug
QWXStsNQMQ==
=Bnn+
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-03-12' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A pixel byte swap fix for st7586, a null pointer dereference fix for
gud, two timings fixes for ti-sn65dsi83, an initialization fix for ivpu,
and a runtime suspend deadlock fix for amdxdna.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260312-accurate-ambrosial-trout-bfabf8@houat
The Xe2_HPM-specific RTP table entries for Wa_16021867713 and
Wa_14019449301 were removed by commit 941f538b0a ("drm/xe: Consolidate
workaround entries for Wa_16021867713") and commit aa0f0a6783
("drm/xe: Consolidate workaround entries for Wa_14019449301") in favor
of alternate entries earlier in the table that cover a wider range of IP
versions. However these Xe2_HPM-specific entries were accidentally
resurrected during a backmerge, which causes the Xe driver to complain
on probe about two entries trying to program the same registers+bits:
<3> [48.491155] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: discarding save-restore reg 1c3f1c (clear: 00000008, set: 00000008, masked: no, mcr: no): ret=-22
<3> [48.491211] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: discarding save-restore reg 1d3f1c (clear: 00000008, set: 00000008, masked: no, mcr: no): ret=-22
<3> [48.491225] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: discarding save-restore reg 1c3f08 (clear: 00000020, set: 00000020, masked: no, mcr: no): ret=-22
<3> [48.491238] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: discarding save-restore reg 1d3f08 (clear: 00000020, set: 00000020, masked: no, mcr: no): ret=-22
Re-drop the redundant Xe2_HPM-specific entries to eliminate the dmesg
errors.
Fixes: 58351f46de ("Merge v7.0-rc3 into drm-next")
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7608
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patch.msgid.link/20260312-wa_merge_fix-v1-1-2ec6607f1e0c@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
snapshot->ctb is u32*, so pointer arithmetic on it scales
the byte offset from xe_bo_size() by 4, overshooting the
intended start of the g2h portion and writing past the
allocated buffer.
Fix this by using void * to get the arithmetic right and
prevent future mishaps.
v2: s/u8/void for memcpy and iosys_map consistency (Matt)
Fixes: af3de6cf06 ("drm/xe: Split H2G and G2H into separate buffer objects")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260304211728.249104-1-mika.kuoppala@linux.intel.com
Currently, ttm_bo_swapout is not exercised by the TTM KUnit tests.
It used to be exercised until commit 76689eb526 ("drm/ttm: remove
ttm_bo_validate_swapout test"), but that test was removed as it was
unreliable due to requiring to allocate half of the system memory.
Calling ttm_bo_swapout directly with a single allocated BO, however, does
not suffer from that problem, and was able to detect a UAF introduced by
commit c06da4b357 ("drm/ttm: Tidy usage of local variables a little
bit"), when built with KASAN.
When applying a fix to that UAF, the test passed without any issues.
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260309-ttm_bo_swapout_test-v2-1-219f64046cfe@igalia.com
Both the target parameter and return value of ttm_bo_swapout deal with
pages, not bytes.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260309-ttm_bo_swapout_doc-v1-1-eeb08176a00b@igalia.com
Implement handling of VM_BIND(..., DECOMPRESS) in xe_vm_bind_ioctl.
Key changes:
- Parse and record per-op intent (op->map.request_decompress) when the
DECOMPRESS flag is present.
- Use xe_pat_index_get_comp_en() helper to check if a PAT index
has compression enabled via the XE2_COMP_EN bit.
- Validate DECOMPRESS preconditions in the ioctl path:
- Only valid for MAP ops.
- The provided pat_index must select the device's "no-compression" PAT.
- Only meaningful on devices with flat CCS and the required XE2+
otherwise return -EOPNOTSUPP.
- Use XE_IOCTL_DBG for uAPI sanity checks.
- Implement xe_bo_decompress():
For VRAM BOs run xe_bo_move_notify(), reserve one fence slot,
schedule xe_migrate_resolve(), and attach the returned fence
with DMA_RESV_USAGE_KERNEL. Non-VRAM cases are silent no-ops.
- Wire scheduling into vma_lock_and_validate() so VM_BIND will schedule
decompression when request_decompress is set.
- Handle fault-mode VMs by performing decompression synchronously during
the bind process, ensuring that the resolve is completed before the bind
finishes.
This schedules an in-place GPU resolve (xe_migrate_resolve) for
decompression.
Compute PR: https://github.com/intel/compute-runtime/pull/898
IGT PR: https://patchwork.freedesktop.org/series/157553/
v7: Rebase on latest drm-tip and add compute and igt pr info
v6: (Matt Auld)
- Rebase as xe_pat_index_get_comp_en() is added in separate
patch
- Drop vm param from xe_bo_decompress(), instead of it
extract tile from bo
- Reject decompression on igpu instead of silent skipping
to avoid any failure on Xe2+igpu as xe_device_has_flat_ccs()
can sometimes be false on igpu due some setting in the BIOS
to turn off compression on igpu.
- Nits
v5: (Matt)
- Correct the condition check of xe_pat_index_get_comp_en
v4: (Matt)
- Introduce xe_pat_index_get_comp_en(), which checks
XE2_COMP_EN for the pat_index
- .interruptible should be true, everything else false
v3: (Matt)
- s/xe_bo_schedule_decompress/xe_bo_decompress
- skip the decrompress step if the BO isn't in VRAM
- start/size not required in xe_bo_schedule_decompress
- Use xe_bo_move_notify instead of xe_vm_invalidate_vma
with respect to invalidation.
- Nits
v2:
- Move decompression work out of vm_bind ioctl. (Matt)
- Put that work in a small helper at the BO/migrate layer invoke it
from vma_lock_and_validate which already runs under drm_exec.
- Move lightweight checks to vm_bind_ioctl_check_args (Matthew Auld)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260304123758.3050386-8-nitin.r.gote@intel.com
