Handle RAS eeprom record when UMC_CHANNEL_IDX_V2 is set.
v2: get UMC_CHANNEL_IDX_V2 flag before the clear of it.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
queue id always remain a positive value and should
be of type unsigned.
With this we also dont need to typecast the id to other
types specially in xarray functions.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Prevent integer overflow when mhz to khz
- Remove always-false branches
- Remove redundant initializers
- Silence unused variable warning
- Initialize replay_state to PR_STATE_INVALID
- Fallback to boot snapshot for dispclk
- Skip cursor cache reset if hubp powergating is disabled
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the PAGE_SIZE is 8KB on sparc64, the size of
structure amdsriov_ras_telemetry will exceed 64KB,
so use absolute value to fix the buffer size.
Fixes the issue:
drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:522:2: error: static
assertion failed due to requirement 'sizeof(struct
amdsriov_ras_telemetry) <= 64 << 10': amdsriov_ras_telemetry must be 64 KB
| sizeof(struct amdsriov_ras_telemetry) <=
AMD_SRIOV_MSG_RAS_TELEMETRY_SIZE_KB_V1 << 10,
drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:522:40: note:
expression evaluates to '115616 <= 65536'
| sizeof(struct amdsriov_ras_telemetry) <=
AMD_SRIOV_MSG_RAS_TELEMETRY_SIZE_KB_V1 << 10,
Fixes: cb48a6b2b6 ("drm/amd/ras: use dedicated memory as vf ras command buffer")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602261700.rVOLIw4l-lkp@intel.com/
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Cast to long long before multiplication to prevent overflow
when converting mhz to khz by multiplying by 1000.
This is reported as INTEGER_OVERFLOW errors by Coverity.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
program_prealpha_dealpha and hpo_frl_stream_enc_acquired are always
false and all branches depending on them will never be taken.
This is reported as DEADCODE errors by Coverity.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Remove unnecessary default value assignments for variables that
are unconditionally assigned before use.
Linux kernel code style prefers no assignments during initialization
when variables are assigned unconditionally as they can obscures
the actual data flow. In addition, compilers will be able to catch them
if variables are used without being updated later in all conditions.
This is reported as UNUSED_VALUE errors by Coverity.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Initialize the replay_state variable to PR_STATE_INVALID instead of
PR_STATE_0 before retrieving the actual replay state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the dentist is unavailable, fallback to reading CLKIP via the boot
snapshot to get the current dispclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Warning: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:415 expecting prototype for smu_msg_proto_v1_send_msg(). Prototype was for smu_msg_v1_send_msg() instead
Fixes: 4f379370a4 ("drm/amd/pm: Add smu message control block")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Warning: drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_eeprom.c:845 function parameter 'ras_core' not described in 'ras_eeprom_append'
Warning: drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_eeprom.c:845 expecting prototype for ras_core_eeprom_append(). Prototype was for ras_eeprom_append() instead
Fixes: 5c3be5defc ("drm/amd/ras: Add eeprom ras functions")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:1923 expecting prototype for amdgpu_ttm_mmio_remap_bo_init(). Prototype was for amdgpu_ttm_alloc_mmio_remap_bo() instead
Fixes: 96e97a562d ("drm/amdgpu: Drop MMIO_REMAP domain bit and keep it Internal")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forcing an int to be dereferenced at uint64_t for div64_u64_rem() runs
the risk of endian confusion and stack overflowing writes. Seen while
preparing to enable -Warray-bounds globally:
In file included from ../arch/x86/include/asm/processor.h:35,
from ../include/linux/sched.h:13,
from ../include/linux/ratelimit.h:6,
from ../include/linux/dev_printk.h:16,
from ../drivers/gpu/drm/amd/amdgpu/../ras/ras_mgr/ras_sys.h:29,
from ../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras.h:27,
from ../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c:24:
In function 'div64_u64_rem',
inlined from 'ras_core_convert_timestamp_to_time' at ../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c:72:9:
../include/linux/math64.h:56:20: error: array subscript 'u64 {aka long long unsigned int}[0]' is partly outside array bounds of 'int[1]' [-Werror=array-bounds=]
56 | *remainder = dividend % divisor;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c: In function 'ras_core_convert_timestamp_to_time':
../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c:70:19: note: object 'remaining_seconds' of size 4
70 | int days, remaining_seconds;
| ^~~~~~~~~~~~~~~~~
Use a 64-bit type for the remainder calculation, but leave
remaining_seconds as 32-bit to avoid 64-bit division later. The value of
remainder will always be less than seconds_per_day, so there's no
truncation risk.
Fixes: ace232eff5 ("drm/amdgpu: Add ras module files into amdgpu")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will set DPG flags for enabling power gating on GFX11_5_4
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Create DEGAMMA properties even if color pipeline is enabled, and enforce
the mutual exclusion in atomic check by rejecting any commit that
attempts to enable both COLOR_PIPELINE on the plane and DEGAMMA_LUT on
the CRTC simultaneously.
Fixes: 18a4127e93 ("drm/amd/display: Disable CRTC degamma when color pipeline is enabled")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4963
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
New ASIC's 3D LUT is indicated by mpc.preblend.
Fixes: 0de2b1afea ("drm/amd/display: add 3D LUT colorop")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wa_16025250150 asks us to set five register fields of the register to
0x1 each. However we were just OR'ing this into the existing register
value (which has a default of 0x4 for each nibble-sized field) resulting
in final field values of 0x5 instead of the desired 0x1. Correct the
RTP programming (use FIELD_SET instead of SET) to ensure each field is
assigned to exactly the value we want.
Cc: Aradhya Bhatia <aradhya.bhatia@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Fixes: 7654d51f1f ("drm/xe/xe2hpg: Add Wa_16025250150")
Reviewed-by: Ngai-Mint Kwan <ngai-mint.kwan@linux.intel.com>
Link: https://patch.msgid.link/20260227164341.3600098-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Currently xe_lrc_init() does two things.
1. Allocates LRC bo based on exec queue parameters.
2. Initializes LRC bo with actual context details.
Introduce xe_lrc_ctx_init() and split these two implementations for
better maintainability.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260302082757.3516577-1-raag.jadav@intel.com
xe_gsc_proxy_remove undoes what is done in both xe_gsc_proxy_init and
xe_gsc_proxy_start; however, if we fail between those 2 calls, it is
possible that the HW forcewake access hasn't been initialized yet and so
we hit errors when the cleanup code tries to write GSC register. To
avoid that, split the cleanup in 2 functions so that the HW cleanup is
only called if the HW setup was completed successfully.
Since the HW cleanup (interrupt disabling) is now removed from
xe_gsc_proxy_remove, the cleanup on error paths in xe_gsc_proxy_start
must be updated to disable interrupts before returning.
Fixes: ff6cd29b69 ("drm/xe: Cleanup unwind of gt initialization")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260220225308.101469-1-zhanjun.dong@intel.com
Currently the `TyrDriver` struct implements both `platform::Driver` and
`drm::Driver`. For clarity, split up these two roles:
- Introduce `TyrPlatformDriverData` to implement `platform::Driver`, and
- Introduce `TyrDrmDriver` to implement `drm::Driver`.
Also rename other variables to reflect their roles in the DRM context:
- Rename `TyrDevice` to `TyrDrmDevice`
- Rename `TyrData` to `TyrDrmDeviceData`
- Rename `File` to `TyrDrmFileData`
- Rename `DrmFile` to `TyrDrmFile`
No functional changes are intended.
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260224002314.344675-1-deborah.brouwer@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
Fixes: 3c1fa4aa60 ("drm/xe: Move queue init before LRC creation")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> (v1)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-2-tomasz.lis@intel.com
(cherry picked from commit 393e5fea6f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
Fixes: b30d5de3d4 ("drm/xe/configfs: Add mid context restore bb")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260225013448.3547687-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a235e7d009)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If a batch buffer is complete, it makes little sense to preempt the
fence signaling instructions in the ring, as the largest portion of the
work (the batch buffer) is already done and fence signaling consists of
only a few instructions. If these instructions are preempted, the GuC
would need to perform a context switch just to signal the fence, which
is costly and delays fence signaling. Avoid this scenario by disabling
preemption immediately after the BB start instruction and re-enabling it
after executing the fence signaling instructions.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260115004546.58060-1-matthew.brost@intel.com
(cherry picked from commit 2bcbf2dcde)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Consider the following application:
#include <fcntl.h>
#include <string.h>
#include <drm/drm.h>
#include <sys/ioctl.h>
int main(void) {
int fd = open("/dev/dri/renderD128", O_RDWR);
struct drm_syncobj_create arg1;
ioctl(fd, DRM_IOCTL_SYNCOBJ_CREATE, &arg1);
struct drm_syncobj_handle arg2;
memset(&arg2, 1, sizeof(arg2)); // simulate dirty stack
arg2.handle = arg1.handle;
arg2.flags = 0;
arg2.fd = 0;
arg2.pad = 0;
// arg2.point = 0; // userspace is required to set point to 0
ioctl(fd, DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD, &arg2);
}
The last ioctl returns EINVAL because args->point is not 0. However,
userspace developed against older kernel versions is not aware of the
new point field and might therefore not initialize it.
The correct check would be
if (args->flags & DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_TIMELINE)
return -EINVAL;
However, there might already be userspace that relies on this not
returning an error as long as point == 0. Therefore use the more lenient
check.
Fixes: c2d3a73006 ("drm/syncobj: Extend EXPORT_SYNC_FILE for timeline syncobjs")
Signed-off-by: Julian Orth <ju.orth@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260301-point-v1-1-21fc5fd98614@gmail.com
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The test itself does not change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260227133113.235940-8-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The test itself does not change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Adrián Larumbe" <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260227133113.235940-7-tzimmermann@suse.de
Before the MIPI DSI clock source can be configured, the target divide
ratio needs to be set.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 5a4326f2e3 ("clk: renesas: rzg2l: Remove DSI clock rate restrictions")
Link: https://patch.msgid.link/20260227015216.2721504-1-chris.brandt@renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
UAPI Changes:
connector:
- Add panel_type property
fourcc:
- Add ARM interleaved 64k modifier
nouveau:
- Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO
Cross-subsystem Changes:
coreboot:
- Clean up coreboot framebuffer support
dma-buf:
- Provide revoke mechanism for shared buffers
- Rename move_notify callback to invalidate_mappings and update users.
- Always enable move_notify
- Support dma_fence_was_initialized() test
- Protect dma_fence_ops by RCU and improve locking
- Fix sparse warnings
Core Changes:
atomic:
- Allocate drm_private_state via callback and convert drivers
atomic-helper:
- Use system_percpu_wq
buddy:
- Make buddy allocator available to all DRM drivers
- Document flags and structures
colorop:
- Add destroy helper and convert drivers
fbdev-emulation:
- Clean up
gem:
- Fix drm_gem_objects_lookup() error cleanup
Driver Changes:
amdgpu:
- Set panel_type to OELD for eDP
atmel-hlcdc:
- Support sana5d65 LCD controller
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- Clean up
imagination:
- Clean up
komeda:
- Fix integer overflow in AFBC checks
mcde:
- Improve bridge handling
nouveau:
- Provide Z-cull info to user space
- gsp: Support GA100
- Shutdown on PCI device shutdown
- Clean up
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- Fix Kconfig dependencies
panthor:
- Add tracepoints for power and IRQs
rcar-du:
- dsi: fix VCLK calculation
rockchip:
- vop2: Use drm_ logging functions
- Support DisplayPort on RK3576
sysfb:
- corebootdrm: Support system framebuffer on coreboot firmware; detect orientation
- Clean up pixel-format lookup
sun4i:
- Clean up
tilcdc:
- Use DT bindings scheme
- Use managed DRM interfaces
- Support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Clean up a lot of obsolete code
v3d:
- Clean up
vc4:
- Use system_percpu_wq
- Clean up
verisilicon:
- Support DC8200 plus DT bindings
virtgpu:
- Support PRIME imports with enabled 3D
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmmgV6IbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJEGgNwR1TC3oj3VsH/0xa8RvMN/B882kLA9N2
Dz9MR3sD3gCKiO3kzLTWncMnvI3qpSZCD/mR86+h7sEh5qiFFSiziZCCEF+BFkpB
UHK4mawDhMpOQiW+HhTR9V110WVrqtW8jVVg0db9XBE8y7xtj/lV3hv+/1N7WCkg
9fuxPkXby5cnW6aA8lPYzIdILFknwNVrzYCiPFmc4bXM5uynD0ft7KGR0dgViBIh
e6IQ+2POz0N0oVOdKGu10wvBQXKOznHpDPRK8844QrLb8CD/W8/mlifeqESDEsM1
TaPFdupXNdt0jdE2Jb+R+kGWfhM9T+CrtgaQ9LBNTDD8/RO2NrQIxDSYvnKw0DzQ
jlE=
=5H3Q
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-02-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
connector:
- Add panel_type property
fourcc:
- Add ARM interleaved 64k modifier
nouveau:
- Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO
Cross-subsystem Changes:
coreboot:
- Clean up coreboot framebuffer support
dma-buf:
- Provide revoke mechanism for shared buffers
- Rename move_notify callback to invalidate_mappings and update users.
- Always enable move_notify
- Support dma_fence_was_initialized() test
- Protect dma_fence_ops by RCU and improve locking
- Fix sparse warnings
Core Changes:
atomic:
- Allocate drm_private_state via callback and convert drivers
atomic-helper:
- Use system_percpu_wq
buddy:
- Make buddy allocator available to all DRM drivers
- Document flags and structures
colorop:
- Add destroy helper and convert drivers
fbdev-emulation:
- Clean up
gem:
- Fix drm_gem_objects_lookup() error cleanup
Driver Changes:
amdgpu:
- Set panel_type to OELD for eDP
atmel-hlcdc:
- Support sana5d65 LCD controller
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- Clean up
imagination:
- Clean up
komeda:
- Fix integer overflow in AFBC checks
mcde:
- Improve bridge handling
nouveau:
- Provide Z-cull info to user space
- gsp: Support GA100
- Shutdown on PCI device shutdown
- Clean up
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- Fix Kconfig dependencies
panthor:
- Add tracepoints for power and IRQs
rcar-du:
- dsi: fix VCLK calculation
rockchip:
- vop2: Use drm_ logging functions
- Support DisplayPort on RK3576
sysfb:
- corebootdrm: Support system framebuffer on coreboot firmware; detect orientation
- Clean up pixel-format lookup
sun4i:
- Clean up
tilcdc:
- Use DT bindings scheme
- Use managed DRM interfaces
- Support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Clean up a lot of obsolete code
v3d:
- Clean up
vc4:
- Use system_percpu_wq
- Clean up
verisilicon:
- Support DC8200 plus DT bindings
virtgpu:
- Support PRIME imports with enabled 3D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260226143615.GA47200@linux.fritz.box
Reorder the select statements in NOVA_CORE Kconfig to be in
alphabetical order.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://patch.msgid.link/20260224225323.3312204-3-joelagnelf@nvidia.com
[acourbot@nvidia.com: fix conflict due to patch reordering.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
If the xe module within a VM was creating a new LRC during save/
restore, this LRC will be invalid. The fixups procedure may not
be able to reach it, as there will be a race to add the new LRC
reference to an exec queue.
Even if the new LRC which was being created during VM migration is
added to EQ in time for fixups, said LRC may still remain damaged.
In a small percentage of specially crafted test cases, the resulting
LRC was still damaged and caused GPU hang.
Any LRC which could be created in such a situation, have to be
re-created.
Due to VM having arbitrarily set amount of CPU cores, it is possible
to limit the amount to 1. In such case, there is a possibility that
kernel will switch CPU contexts in a way which allows to miss
VF migration recovery running in parallel (by simply not switching
to the LRC creation thread during recovery). Therefore checking
if the migration is in progress just after LRC creation, is not
enough to ensure detection.
Free the incorrectly created LRC, and trigger a re-run of the
creation, but only after waiting for default LRC to get fixups.
Use additional atomic value increased after fixups, to ensure any VF
migration that avoided detection by just checking for recovery in
progress, will be caught.
v2: Merge marker and wait for default LRC, reducing amount of calls
within xe_init_eq(). Alter the LRC creation loop to remove a race
with post-migration fixups worker.
v3: Kerneldoc fixes. Rename fixups_complete_count.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-5-tomasz.lis@intel.com
When a context is being created during save/restore, the LRC creation
needs to wait for GGTT address space to be shifted. But it also needs
to have fixed default LRCs. This is mandatory to avoid the situation
where LRC will be created based on data from before the fixups, but
reference within exec queue will be set too late for fixups.
This fixes an issue where contexts created during save/restore have
a large chance of having one unfixed LRC, due to the xe_lrc_create()
being synced for equal start to race with default LRC fixups.
v2: Move the fixups confirmation further, behind all fixups.
Revert some renames.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-4-tomasz.lis@intel.com
There is a small but non-zero chance that VF post migration fixups
are running on an exec queue during teardown. The chances are
decreased by starting the teardown by releasing guc_id, but remain
non-zero. On the other hand the sync between fixups and EQ creation
(wait_valid_ggtt) drastically increases the chance for such parallel
teardown if queue creation error path is entered (err_lrc label).
The exec queue itself is not going to cause an issue, but LRCs have
a small chance of getting freed during the fixups.
Creating a setter and a getter makes it easier to protect the fixup
operations with a lock. For other driver activities, the original
access method (without any protection) can still be used.
v2: Separate lock, only for LRCs. Kerneldoc fixes. Subject tag fix.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-3-tomasz.lis@intel.com
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
Fixes: 3c1fa4aa60 ("drm/xe: Move queue init before LRC creation")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> (v1)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-2-tomasz.lis@intel.com
Tighten uapi validation to restrict multi-lrc support to VIDEO_DECODE and
VIDEO_ENHANCE engines only. This check should have been in place from the
start, as the driver typically avoids allowing uapi cases that we have
no userspace consumer for.
Additionally, the GuC firmware on ModSched platforms no longer supports
multi-lrc on non-media engines.
V4:
- use a unified mask for all platforms since engine instance count
is an independent runtime check (Matt Roper, Matthew Brost)
V3:
- store a multi-lrc enable class mask in xe->info and populate from
xe_device_desc in xe_pci.c (Matthew Brost)
V2:
- correct the typo (Shuicheng)
- move the check earlier to avoid VM lookup (Shuicheng, Matt Roper)
- remove the graphics version check (Matt Roper)
- input more details in the commit info (Matt Roper)
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260225022014.45394-1-x.wang@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
A recent bspec tuning guide update asks us to program
COMMON_SLICE_CHICKEN4[5] on Xe3 and Xe3p platforms. Add this setting to
our LRC tuning RTP table so that the setting will become part of each
context's LRC.
Bspec: 72161, 55902
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260224235055.3038710-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The test itself does not change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260227133113.235940-5-tzimmermann@suse.de
Fix a nasty copy and paste bug, where the incorrect boolean return type of
the ttm_pool_beneficial_order() helper had a consequence of avoiding
direct reclaim too eagerly for drivers which use this feature (currently
amdgpu).
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 7e9c548d37 ("drm/ttm: Allow drivers to specify maximum beneficial TTM pool size")
Cc: Christian König <christian.koenig@amd.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.19+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260227124901.3177-1-tvrtko.ursulin@igalia.com
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The test itself does not change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: nouveau@lists.freedesktop.org
Link: https://patch.msgid.link/20260227133113.235940-6-tzimmermann@suse.de
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Some DRM tests cross the 1s execution time threshold that defines a test
as slow. Let's flag them as such.
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260224110310.1854608-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_sched_fini() contained a hack to work around a race in amdgpu.
According to AMD, the hack should not be necessary anymore. In case
there should have been undetected users,
commit 975ca62a01 ("drm/sched: Add warning for removing hack in drm_sched_fini()")
had added a warning one release cycle ago.
Thus, it can be derived that the hack can be savely removed by now.
Remove the hack.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260108083019.63532-2-phasta@kernel.org
Convert the direct i915_overlay_*() calls from the display
side to go over a new parent interface instead.
v2: Correctly handle the ERR_PTR returned by
i915_overlay_obj_lookup() (Jani)
v3: Rebase due to the NULL check in intel_overlay_cleanup()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226130150.16816-1-ville.syrjala@linux.intel.com
Relocate the i915 driver specific parts of the overlay code
into i915_overlay.c. This leaves intel_overlay.c with just
the display specific code.
The one annoyance here is the DSPCLK_GATE_D register access
being done from i830_overlay_clock_gating(). The register
definition lives on the display side as we do need to access
it on other platforms there. Since it's just one register
and bit, I decided to just duplicate that part in i915_reg.h.
v2: Use kzalloc_obj()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226133855.17690-1-ville.syrjala@linux.intel.com
We don't generally want fetch_and_zero() on the display side, so
stop using it in the display side intel_overlay_cleanup().
Fortunately we don't really have anything to do here apart from
freeing the data. And we'll keep on clearing the pointer, just
in case something somewhere cares about it.
Note that once i915_overlay_cleanup() is converted to the parent
interface we can't call it unconditionally (as xe won't have it).
So we need to keep the early bailout for overlay==NULL.
v2: Adjust the commit message since we do apparently
have fetch_and_zero() in display code as well (Jani)
v3: Skip i915_overlay_cleanup() if the overlay wasn't initialized
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226130113.16714-1-ville.syrjala@linux.intel.com
Split the i915 driver specific bits from 'struct intel_overlay'
into a seaarate 'struct i915_overlay'. The latter will move to
the i915 side of the parent vs. display driver split.
The display side will also need to know the virtual address of
the register map. That now gets passed as the return value
from i915_overlay_setup(), so that the display side doesn't
need to know how the mapping was achieved.
v2: Use kzalloc_obj()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226100738.29997-17-ville.syrjala@linux.intel.com
i830_overlay_clock_gating() will remain on the i915 side of the
parent vs. display driver split. Stop using display specific stuff
inside it.
The one annoyance here is access to the display engine's
DSPCLK_GATE_D register. The proper way to deal with that might
be to move it to the display side, but that seems a bit hard right
now. So leave it where it is for now.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226100738.29997-15-ville.syrjala@linux.intel.com
Adjust the names ("i915_overlay_" prefix) and calling
convention (pass the driver agnostic 'struct drm_device'()
of the functions that will provide the remainder of the
parent driver interface to be used by the overlay display
code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226100738.29997-14-ville.syrjala@linux.intel.com
Some of the lower level functions in the overlay code will
move to the i915 side of the upcoming parent vs. display
driver split. Move all such functions to the "i915_overlay_"
namespace to make it easier to see what belongs where.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226100738.29997-13-ville.syrjala@linux.intel.com
