TBT PHY is enablement/disablement is handled by its own TBT module.
We do not play a big part in it's state management, that being take care
by it's own TBT modeule.
The PHY/PLL TypeC mode (TBT, DP-alt) can change after the PLL state was
computed for a modeset, so the state verification after the modeset
sequence would indicate a mismatch in case the mode changed from DP-alt
to TBT, or from TBT to DP-alt mode. To avoid such a mismatch error the
verification is skipped if the mode for either the read-out or the
computed state is TBT (where that TBT PLL state doesn't reflect anyway
the PLL's actual HW state).
Simply return true when we are in tbt mode.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260204023247.1560196-1-suraj.kandpal@intel.com
When NVK enabled large pages userspace tests were seeing fault
reports at a valid address.
There was a case where an address moving from 64k page to 4k pages
could expose a race between unmapping the 4k page, mapping the 64k
page and unref the 4k pages.
Unref 4k pages would cause the dual-page table handling to always
set the LPTE entry to SPARSE or INVALID, but if we'd mapped a valid
LPTE in the meantime, it would get trashed. Keep track of when
a valid LPTE has been referenced, and don't reset in that case.
This adds an lpte valid tracker and lpte reference count.
Whenever an lpte is referenced, it gets made valid and the ref count
increases, whenever it gets unreference the refcount is tracked.
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14610
Reviewed-by: Mary Guillemard <mary@mary.zone>
Tested-by: Mary Guillemard <mary@mary.zone>
Tested-by: Mel Henning <mhenning@darkrefraction.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260204030208.2313241-4-airlied@gmail.com
We need to tracker large counts of spte than previously due to unref
getting delayed sometimes.
This doesn't fix LPT tracking yet, it just creates space for it.
Reviewed-by: Mary Guillemard <mary@mary.zone>
Tested-by: Mary Guillemard <mary@mary.zone>
Tested-by: Mel Henning <mhenning@darkrefraction.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260204030208.2313241-3-airlied@gmail.com
I want to increase the counters here and start tracking LPTs as well
as there are certain situations where userspace with mixed page sizes
can cause ref/unrefs to live longer so need better reference counting.
This should be entirely non-functional.
Reviewed-by: Mary Guillemard <mary@mary.zone>
Tested-by: Mary Guillemard <mary@mary.zone>
Tested-by: Mel Henning <mhenning@darkrefraction.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260204030208.2313241-2-airlied@gmail.com
Merge updates related to runtime PM for 6.20-rc1/7.0-rc1:
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
* pm-runtime:
drm: Discard pm_runtime_put() return value
genirq/chip: Change irq_chip_pm_put() return type to void
scsi: ufs: core: Discard pm_runtime_put() return values
platform/chrome: cros_hps_i2c: Discard pm_runtime_put() return value
coresight: Discard pm_runtime_put() return values
hwspinlock: omap: Discard pm_runtime_put() return value
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
media: ccs: Discard pm_runtime_put() return value
drm/imagination: Discard pm_runtime_put() return value
USB: core: Discard pm_runtime_put() return value
The current code rejects device mappings whenever system pages have
already been encountered. This is not the intended behavior when
allow_mixed is set.
Relax the restriction by permitting a single pagemap to be selected when
allow_mixed is enabled, even if system pages were found earlier.
Fixes: bce13d6ecd ("drm/gpusvm, drm/xe: Allow mixed mappings for userptr")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260130194928.3255613-3-matthew.brost@intel.com
drm_gpusvm_get_pages() only sets the local flags prior to committing the
pages. If an error occurs mid-mapping, has_dma_mapping will be clear,
causing the unmap function to skip unmapping pages that were
successfully mapped before the error. Fix this by forcibly setting
has_dma_mapping in the error path to ensure all previously mapped pages
are properly unmapped.
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260130194928.3255613-2-matthew.brost@intel.com
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_tlb_inval_job.c:210 expecting prototype for
xe_tlb_inval_alloc_dep(). Prototype was for xe_tlb_inval_job_alloc_dep()
instead"
Fixes: 15366239e2 ("drm/xe: Decouple TLB invalidations from GT")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-8-shuicheng.lin@intel.com
(cherry picked from commit 9f9c117ac5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_tlb_inval.c:136 expecting prototype for
xe_gt_tlb_inval_init(). Prototype was for xe_gt_tlb_inval_init_early()
instead"
v2: add () for the function. (Michal)
Fixes: db16f9d90c ("drm/xe: Split TLB invalidation code in frontend and backend")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-7-shuicheng.lin@intel.com
(cherry picked from commit 0651dbb9d6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_migrate.c:1262 expecting prototype for
xe_get_migrate_exec_queue(). Prototype was for xe_migrate_exec_queue()
instead"
Fixes: 916ee4704a ("drm/xe/vf: Register CCS read/write contexts with Guc")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-6-shuicheng.lin@intel.com
(cherry picked from commit 9fd8da7179)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The topology query helper advanced the user pointer by the size
of the pointer, not the size of the structure. This can misalign
the output blob and corrupt the following mask. Fix the increment
to use sizeof(*topo).
There is no issue currently, as sizeof(*topo) happens to be equal
to sizeof(topo) on 64-bit systems (both evaluate to 8 bytes).
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260130043907.465128-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c2a6859138)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The mgag200_bmc_stop_scanout() function is called by the .atomic_disable()
handler for the MGA G200 VGA BMC encoder. This function performs a few
register writes to inform the BMC of an upcoming mode change, and then
polls to wait until the BMC actually stops.
The polling is implemented using a busy loop with udelay() and an iteration
timeout of 300, resulting in the function blocking for 300 milliseconds.
The function gets called ultimately by the output_poll_execute work thread
for the DRM output change polling thread of the mgag200 driver:
kworker/0:0-mm_ 3528 [000] 4555.315364:
ffffffffaa0e25b3 delay_halt.part.0+0x33
ffffffffc03f6188 mgag200_bmc_stop_scanout+0x178
ffffffffc087ae7a disable_outputs+0x12a
ffffffffc087c12a drm_atomic_helper_commit_tail+0x1a
ffffffffc03fa7b6 mgag200_mode_config_helper_atomic_commit_tail+0x26
ffffffffc087c9c1 commit_tail+0x91
ffffffffc087d51b drm_atomic_helper_commit+0x11b
ffffffffc0509694 drm_atomic_commit+0xa4
ffffffffc05105e8 drm_client_modeset_commit_atomic+0x1e8
ffffffffc0510ce6 drm_client_modeset_commit_locked+0x56
ffffffffc0510e24 drm_client_modeset_commit+0x24
ffffffffc088a743 __drm_fb_helper_restore_fbdev_mode_unlocked+0x93
ffffffffc088a683 drm_fb_helper_hotplug_event+0xe3
ffffffffc050f8aa drm_client_dev_hotplug+0x9a
ffffffffc088555a output_poll_execute+0x29a
ffffffffa9b35924 process_one_work+0x194
ffffffffa9b364ee worker_thread+0x2fe
ffffffffa9b3ecad kthread+0xdd
ffffffffa9a08549 ret_from_fork+0x29
On a server running ptp4l with the mgag200 driver loaded, we found that
ptp4l would sometimes get blocked from execution because of this busy
waiting loop.
Every so often, approximately once every 20 minutes -- though with large
variance -- the output_poll_execute() thread would detect some sort of
change that required performing a hotplug event which results in attempting
to stop the BMC scanout, resulting in a 300msec delay on one CPU.
On this system, ptp4l was pinned to a single CPU. When the
output_poll_execute() thread ran on that CPU, it blocked ptp4l from
executing for its 300 millisecond duration.
This resulted in PTP service disruptions such as failure to send a SYNC
message on time, failure to handle ANNOUNCE messages on time, and clock
check warnings from the application. All of this despite the application
being configured with FIFO_RT and a higher priority than the background
workqueue tasks. (However, note that the kernel did not use
CONFIG_PREEMPT...)
It is unclear if the event is due to a faulty VGA connection, another bug,
or actual events causing a change in the connection. At least on the system
under test it is not a one-time event and consistently causes disruption to
the time sensitive applications.
The function has some helpful comments explaining what steps it is
attempting to take. In particular, step 3a and 3b are explained as such:
3a - The third step is to verify if there is an active scan. We are
waiting on a 0 on remhsyncsts (<XSPAREREG<0>.
3b - This step occurs only if the remove is actually scanning. We are
waiting for the end of the frame which is a 1 on remvsyncsts
(<XSPAREREG<1>).
The actual steps 3a and 3b are implemented as while loops with a
non-sleeping udelay(). The first step iterates while the tmp value at
position 0 is *not* set. That is, it keeps iterating as long as the bit is
zero. If the bit is already 0 (because there is no active scan), it will
iterate the entire 300 attempts which wastes 300 milliseconds in total.
This is opposite of what the description claims.
The step 3b logic only executes if we do not iterate over the entire 300
attempts in the first loop. If it does trigger, it is trying to check and
wait for a 1 on the remvsyncsts. However, again the condition is actually
inverted and it will loop as long as the bit is 1, stopping once it hits
zero (rather than the explained attempt to wait until we see a 1).
Worse, both loops are implemented using non-sleeping waits which spin
instead of allowing the scheduler to run other processes. If the kernel is
not configured to allow arbitrary preemption, it will waste valuable CPU
time doing nothing.
There does not appear to be any documentation for the BMC register
interface, beyond what is in the comments here. It seems more probable that
the comment here is correct and the implementation accidentally got
inverted from the intended logic.
Reading through other DRM driver implementations, it does not appear that
the .atomic_enable or .atomic_disable handlers need to delay instead of
sleep. For example, the ast_astdp_encoder_helper_atomic_disable() function
calls ast_dp_set_phy_sleep() which uses msleep(). The "atomic" in the name
is referring to the atomic modesetting support, which is the support to
enable atomic configuration from userspace, and not to the "atomic context"
of the kernel. There is no reason to use udelay() here if a sleep would be
sufficient.
Replace the while loops with a read_poll_timeout() based implementation
that will sleep between iterations, and which stops polling once the
condition is met (instead of looping as long as the condition is met). This
aligns with the commented behavior and avoids blocking on the CPU while
doing nothing.
Note the RREG_DAC is implemented using a statement expression to allow
working properly with the read_poll_timeout family of functions. The other
RREG_<TYPE> macros ought to be cleaned up to have better semantics, and
several places in the mgag200 driver could make use of RREG_DAC or similar
RREG_* macros should likely be cleaned up for better semantics as well, but
that task has been left as a future cleanup for a non-bugfix.
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260202-jk-mgag200-fix-bad-udelay-v2-1-ce1e9665987d@intel.com
The r570 firmware with certain GPUs (at least RTX6000) needs this
flag to reflect the suspend vs runtime PM state of the driver.
This uses that info to set the correct flags to the firmware.
This fixes a regression on RTX6000 and other GPUs since r570 firmware
was enabled.
Fixes: 53dac06238 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260203052431.2219998-4-airlied@gmail.com
This is just refactoring to allow the lower layers to distinguish
between suspend and runtime suspend.
GSP 570 needs to set a flag with the GPU is going into GCOFF,
this flag taken from the opengpu driver is set whenever runtime
suspend is enterning GCOFF but not for normal suspend paths.
This just refactors the code, a subsequent patch use the information.
Fixes: 53dac06238 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260203052431.2219998-3-airlied@gmail.com
There are two layers of sequence numbers, one at the msg level
and one at the rpc level.
570 firmware started asserting on the sequence numbers being
in the right order, and we would see nocat records with asserts
in them.
Add the rpc level sequence number support.
Fixes: 53dac06238 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260203052431.2219998-2-airlied@gmail.com
If amdgpu_amdkfd_gpuvm_free_memory_of_gpu() fails after kgd_mem is
removed from validate_list, the mem handle still lingers in the KFD idr.
This means when process is terminated,
kfd_process_free_outstanding_kfd_bos() will call
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() again resulting in double
deletion.
To avoid this -
(a) Check if list is empty before deleting it
(b) Rearragne amdgpu_amdkfd_gpuvm_free_memory_of_gpu() such that it can
be safely called again if it returns failure the first time.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ba60345f4)
There is nothing wrong if in_shaper_func type is DISTRIBUTED POINTS.
Remove the assert placed for a TODO to avoid misinterpretations.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1714dcc4c2)
Commit 27fc10d109 ("drm/amd/display: Fix the delta clamping for shaper
LUT") fixed banding when using plane shaper LUT in DCN10 CM helper. The
problem is also present in DCN30 CM helper, fix banding by extending the
same bug delta clamping fix to CM3.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0274a54897)
Some shimmer/colorful points appears when using the steamOS color
pipeline for HDR on gaming with DCN32. These points look like black
values being wrongly mapped to red/blue/green values. It was caused
because the number of hw points in regular LUTs and in a shaper LUT was
treated as the same.
DCN3+ regular LUTs have 257 bases and implicit deltas (i.e. HW
calculates them), but shaper LUT is a special case: it has 256 bases and
256 deltas, as in DCN1-2 regular LUTs, and outputs 14-bit values.
Fix that by setting by decreasing in 1 the number of HW points computed
in the LUT segmentation so that shaper LUT (i.e. fixpoint == true) keeps
the same DCN10 CM logic and regular LUTs go with `hw_points + 1`.
CC: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Fixes: 4d5fd3d08e ("drm/amd/display: PQ tail accuracy")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5006505b19)
This reverts commit 7294863a6f.
This commit was erroneously applied again after commit 0ab5d711ec
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
Link: https://lore.kernel.org/linux-acpi/20251006120944.7880-1-spasswolf@web.de/
Link: https://github.com/acpica/acpica/issues/1060
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 97a9689300)
Cc: stable@vger.kernel.org
commit f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence") caused
a dependency on new enough MES firmware to use amdgpu. This was fixed
on most gfx11 and gfx12 hardware with commit 0180e0a5dd
("drm/amdgpu/mes: add compatibility checks for set_hw_resource_1"), but
this left out that GC 11.0.4 had breakage at MES 0x51.
Bump the requirement to 0x52 instead.
Reported-by: danijel@nausys.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4576
Fixes: f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2d2ccc85f)
Cc: stable@vger.kernel.org
No longer required to allocate temporary buffer while fetching metrcis,
instead, use metrics table cache data directly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is nothing wrong if in_shaper_func type is DISTRIBUTED POINTS.
Remove the assert placed for a TODO to avoid misinterpretations.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 27fc10d109 ("drm/amd/display: Fix the delta clamping for shaper
LUT") fixed banding when using plane shaper LUT in DCN10 CM helper. The
problem is also present in DCN30 CM helper, fix banding by extending the
same bug delta clamping fix to CM3.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some shimmer/colorful points appears when using the steamOS color
pipeline for HDR on gaming with DCN32. These points look like black
values being wrongly mapped to red/blue/green values. It was caused
because the number of hw points in regular LUTs and in a shaper LUT was
treated as the same.
DCN3+ regular LUTs have 257 bases and implicit deltas (i.e. HW
calculates them), but shaper LUT is a special case: it has 256 bases and
256 deltas, as in DCN1-2 regular LUTs, and outputs 14-bit values.
Fix that by setting by decreasing in 1 the number of HW points computed
in the LUT segmentation so that shaper LUT (i.e. fixpoint == true) keeps
the same DCN10 CM logic and regular LUTs go with `hw_points + 1`.
CC: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Fixes: 4d5fd3d08e ("drm/amd/display: PQ tail accuracy")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If amdgpu_amdkfd_gpuvm_free_memory_of_gpu() fails after kgd_mem is
removed from validate_list, the mem handle still lingers in the KFD idr.
This means when process is terminated,
kfd_process_free_outstanding_kfd_bos() will call
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() again resulting in double
deletion.
To avoid this -
(a) Check if list is empty before deleting it
(b) Rearragne amdgpu_amdkfd_gpuvm_free_memory_of_gpu() such that it can
be safely called again if it returns failure the first time.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The return code of a non void function should not be ignored. In cases
where we do not care, the code needs to suppress it.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add get ras capability for psp 15.0.8.
v2:Remove APU type check and IP version check.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of default features could be different from the actual width
of the bitmap. Use a different definition for it. Also increase the max
width of bitmap to 128.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use smu_feature_bits instead of uint64_t pointer and operate on
feature bits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feature bits are not necessarily restricted to 64-bits. Use
smu_feature_bits data structure to represent feature mask for checking
DPM status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7294863a6f.
This commit was erroneously applied again after commit 0ab5d711ec
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
Link: https://lore.kernel.org/linux-acpi/20251006120944.7880-1-spasswolf@web.de/
Link: https://github.com/acpica/acpica/issues/1060
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Migrate DCCG register access from hwseq to dccg component.
- Add lpddr5 handling to dml2.1
- Correct external pr fsm control
- Make DCN35 OTG disable w/a reusable
- Make DSC FGCG a DSC block level function
- Make some DCN35 DCCG symbols reusable
- Fix writeback on DCN 3.2+
- Fix IGT link training failure on Replay panel
- Fix system resume lag issue
- Add oem panel config for new features
- Fix IGT ILR link training failure on Replay panel
- Fix a NULL pointer dereference in dcn20_hwseq.c
- Add Gfx Base Case For Linear Tiling Handling
- Migrate DIO registers access from hwseq to dio component.
- Match expected data types
- Add CRC 32-bit mode support for DCN3.6+
- Init DMUB DPIA Only for APU
- DIO memory leak fix.
- Add Handling for gfxversion DcGfxBase
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new enum definition for panel replay ml activity options.
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no way to set tiling in dml in the case that gfxversion is
DcGfxBase.
[How]
Where tiling is updated based on Gfx, add case for DcGfxBase and set
tiling to dml2_sw_linear.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allocated memory for dcn10_dio but not freed in dcn401_resource.
[how]
Add kfree for it in dcn401_resource.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. There is no need to init dpia in dgpu
2. Add additional dpia flags
a. dpia hpd dynamic control
b. consolidated dpia link training to dp
c. dynamic bw allocation support
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN 3.6+ hardware supports CRC-32 polynomial in addition to the
legacy CRC-16. Enable 32-bit CRC values per color component for
improvement of precision in display validation.
[How]
When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs
interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC
source configuration triggers amdgpu_dm_crtc_configure_crc_source(),
crc_poly_mode is retrieved from dm_irq_params and passed to
dc_stream_configure_crc().
In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the
crc_params structure and passes it to optc35_configure_crc(). If the
hardware supports the OTG_CRC_POLY_SEL register, the register is
programmed to select CRC-16 or CRC-32 polynomial.
When reading CRC values, optc35_get_crc() checks whether CRC32 register
masks are available. If present, it reads 32-bit CRC values from
OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back
to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B
registers.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Data types should match what is expected.
Update/cast data accordingly.
Also change ASSERT to use DML_ASSERT instead
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zheng Austin <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Direct DIO registers access in hwseq layer was creating register conflicts.
[how]
Migrated DIO registers from hwseq to dio component.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence") caused
a dependency on new enough MES firmware to use amdgpu. This was fixed
on most gfx11 and gfx12 hardware with commit 0180e0a5dd
("drm/amdgpu/mes: add compatibility checks for set_hw_resource_1"), but
this left out that GC 11.0.4 had breakage at MES 0x51.
Bump the requirement to 0x52 instead.
Reported-by: danijel@nausys.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4576
Fixes: f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Post-driver cases always use linear tiling yet there is no dedicated
Gfx handling for this condition.
[How]
Add DcGfxBase/DalGfxBase to gfx version enums and set tiling to linear
when it is used. Also, enforce the use of proper tiling format as tiling
information is used.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
hws->funcs.dccg_init is accessed without checking if it is NULL, which
may lead to a NULL pointer dereference.
[how]
Add a NULL check before calling dccg_init.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix the IGT ilr_link-training-configs test failure
by directly using the supported link rates from DPCD.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT link-training-configs test fails to set the link rate on Replay panels
because some link rate types are not supported in debugfs. As a result,
debugfs treats these link rates as invalid, causing the IGT test to fail.
[How]
Add missing link rate types to resolve this issue.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
