Resetting VCN resets the entire tile, including jpeg.
When resetting the VCN, we need to ensure that JPEG data blocks are accessible and we also need to handle the JPEG queue.
Add a helper function to restore the JPEG queue during the VCN reset.
v2: split the jpeg helper in two, in the top helper we can stop the sched workqueues and attempt to wait for any outstanding fences.
Then in the bottom helper, we can force completion, re-init the rings, and restart the sched workqueues (Alex)
v3: merge patches 1 and 2 into one patch (Alex)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MI projects, when Dynamic Power Gating (DPG) is enabled,
VCN reset operations should be performed with DPG in pause mode.
Otherwise, the hardware may perform undesirable reset operations
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WREG32 to write mmCG_THERMAL_INT.
This is a direct access register.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis reveals a potential integer underflow in
intel_fbc_stolen_end. This can apparently occur if
intel_parent_stolen_area_size returns zero (or, theoretically, any value
less than 2^23), as 2^23 is subtracted from the return value and stored
in a u64. While this doesn't appear to cause any issues due to the use
of the min() function to clamp the return values from the
intel_fbc_stolen_end function, it would be best practice to avoid
undeflowing values like this on principle. So, rework the function to
prevent the underflow from occurring. Note that the underflow at
present would result in the value of intel_fbc_cfb_base_max being
returned at the end of intel_fbc_stolen_end, so just return that if the
value of intel_parent_stolen_area_size is too small.
While we're here, fix the other comments here and modify the execution
path for readability.
v2: (Jani)
- Fix the comments in intel_fbc_stolen_end
- Use check_sub_overflow
- Remove macro that mirrors SZ_8M, as it is now only referenced once
- Misc. formatting fixes
Fixes: a9da512b3e ("drm/i915: avoid the last 8mb of stolen on BDW/SKL")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260107162935.8123-2-jonathan.cavitt@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Previously, the driver's internal wedged.mode state was updated without
verifying whether the corresponding engine reset policy update in GuC
succeeded. This could leave the driver reporting a wedged.mode state
that doesn't match the actual reset behavior programmed in GuC.
With this change, the reset policy is updated first, and the driver's
wedged.mode state is modified only if the policy update succeeds on all
available GTs.
This patch also introduces two functional improvements:
- The policy is sent to GuC only when a change is required. An update
is needed only when entering or leaving XE_WEDGED_MODE_UPON_ANY_HANG,
because only in that case the reset policy changes. For example,
switching between XE_WEDGED_MODE_UPON_CRITICAL_ERROR and
XE_WEDGED_MODE_NEVER doesn't affect the reset policy, so there is no
need to send the same value to GuC.
- An inconsistent_reset flag is added to track cases where reset policy
update succeeds only on a subset of GTs. If such inconsistency is
detected, future wedged mode configuration will force a retry of the
reset policy update to restore a consistent state across all GTs.
Fixes: 6b8ef44cc0 ("drm/xe: Introduce the wedged_mode debugfs")
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260107174741.29163-3-lukasz.laguna@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0f13dead4e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
We are meant to be checking the user vm for the bind queue, but actually
we are checking the migrate vm. For various reasons this is not
currently firing but this will likely change in the future.
Now that we have the user_vm attached to the bind queue, we can fix this
by directly checking that here.
Fixes: dba89840a9 ("drm/xe: Add GT TLB invalidation jobs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-4-matthew.auld@intel.com
(cherry picked from commit 9dd1048bca)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Currently this is very broken if someone attempts to create a bind
queue and share it across multiple VMs. For example currently we assume
it is safe to acquire the user VM lock to protect some of the bind queue
state, but if allow sharing the bind queue with multiple VMs then this
quickly breaks down.
To fix this reject using a bind queue with any VM that is not the same
VM that was originally passed when creating the bind queue. This a uAPI
change, however this was more of an oversight on kernel side that we
didn't reject this, and expectation is that userspace shouldn't be using
bind queues in this way, so in theory this change should go unnoticed.
Based on a patch from Matt Brost.
v2 (Matt B):
- Hold the vm lock over queue create, to ensure it can't be closed as
we attach the user_vm to the queue.
- Make sure we actually check for NULL user_vm in destruction path.
v3:
- Fix error path handling.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-3-matthew.auld@intel.com
(cherry picked from commit 9dd08fdecc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
Since the companion bridge pointer is used by .atomic_enable, putting its
reference in the remove function would be dangerous. Use .destroy to put it
on final deallocation.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-3-v2-6-8d7a3dbacdf4@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
dw_hdmi->bridge is used only in dw_hdmi_top_thread_irq(), so in order to
avoid potential use-after-free ensure the irq is freed before putting the
dw_hdmi->bridge reference.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-3-v2-2-8d7a3dbacdf4@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
We are meant to be checking the user vm for the bind queue, but actually
we are checking the migrate vm. For various reasons this is not
currently firing but this will likely change in the future.
Now that we have the user_vm attached to the bind queue, we can fix this
by directly checking that here.
Fixes: dba89840a9 ("drm/xe: Add GT TLB invalidation jobs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-4-matthew.auld@intel.com
Currently this is very broken if someone attempts to create a bind
queue and share it across multiple VMs. For example currently we assume
it is safe to acquire the user VM lock to protect some of the bind queue
state, but if allow sharing the bind queue with multiple VMs then this
quickly breaks down.
To fix this reject using a bind queue with any VM that is not the same
VM that was originally passed when creating the bind queue. This a uAPI
change, however this was more of an oversight on kernel side that we
didn't reject this, and expectation is that userspace shouldn't be using
bind queues in this way, so in theory this change should go unnoticed.
Based on a patch from Matt Brost.
v2 (Matt B):
- Hold the vm lock over queue create, to ensure it can't be closed as
we attach the user_vm to the queue.
- Make sure we actually check for NULL user_vm in destruction path.
v3:
- Fix error path handling.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-3-matthew.auld@intel.com
The Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260120234029.419825-8-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
DRM checks EDID block count against allocated size in drm_edid_valid
function. We have to allocate the right EDID size instead of the max
size to prevent the EDID to be reported as invalid.
Cc: stable@kernel.org
Fixes: 7c585f9a71 ("drm/bridge: anx7625: use struct drm_edid more")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251218151307.95491-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add kunit tests that exercise edge cases where allocation requests
exceed mm->max_order after rounding. This can happen with
non-power-of-two VRAM sizes when the allocator rounds up requests.
For example, with 10G VRAM (8G + 2G roots), mm->max_order represents
the 8G block. A 9G allocation can round up to 16G in multiple ways:
CONTIGUOUS allocation rounds to next power-of-two, or non-CONTIGUOUS
with 8G min_block_size rounds to next alignment boundary.
The test validates CONTIGUOUS and RANGE flag combinations, ensuring that
only CONTIGUOUS-alone allocations use try_harder fallback, while other
combinations return -EINVAL when rounded size exceeds memory, preventing
BUG_ON assertions.
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260108113227.2101872-6-sanjay.kumar.yadav@intel.com
When DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size is
rounded up to the next power-of-two via roundup_pow_of_two().
Similarly, for non-contiguous allocations with large min_block_size,
the size is aligned up via round_up(). Both operations can produce a
rounded size that exceeds mm->size, which later triggers
BUG_ON(order > mm->max_order).
Example scenarios:
- 9G CONTIGUOUS allocation on 10G VRAM memory:
roundup_pow_of_two(9G) = 16G > 10G
- 9G allocation with 8G min_block_size on 10G VRAM memory:
round_up(9G, 8G) = 16G > 10G
Fix this by checking the rounded size against mm->size. For
non-contiguous or range allocations where size > mm->size is invalid,
return -EINVAL immediately. For contiguous allocations without range
restrictions, allow the request to fall through to the existing
__alloc_contig_try_harder() fallback.
This ensures invalid user input returns an error or uses the fallback
path instead of hitting BUG_ON.
v2: (Matt A)
- Add Fixes, Cc stable, and Closes tags for context
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6712
Fixes: 0a1844bf0b ("drm/buddy: Improve contiguous memory allocation")
Cc: <stable@vger.kernel.org> # v6.7+
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260108113227.2101872-5-sanjay.kumar.yadav@intel.com
Don’t reject the commit when the source rectangle has fractional parts.
This can occur due to scaling: drm_atomic_helper_check_plane_state() calls
drm_rect_clip_scaled(), which may introduce fractional parts while
computing the clipped source rectangle. This does not imply the commit is
invalid, so we should accept it instead of discarding it.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251120-lcd_scaling_fix-v1-1-5ffc98557923@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
The softlockup_panic sysctl is currently a binary option: panic
immediately or never panic on soft lockups.
Panicking on any soft lockup, regardless of duration, can be overly
aggressive for brief stalls that may be caused by legitimate operations.
Conversely, never panicking may allow severe system hangs to persist
undetected.
Extend softlockup_panic to accept an integer threshold, allowing the
kernel to panic only when the normalized lockup duration exceeds N
watchdog threshold periods. This provides finer-grained control to
distinguish between transient delays and persistent system failures.
The accepted values are:
- 0: Don't panic (unchanged)
- 1: Panic when duration >= 1 * threshold (20s default, original behavior)
- N > 1: Panic when duration >= N * threshold (e.g., 2 = 40s, 3 = 60s.)
The original behavior is preserved for values 0 and 1, maintaining full
backward compatibility while allowing systems to tolerate brief lockups
while still catching severe, persistent hangs.
[lirongqing@baidu.com: v2]
Link: https://lkml.kernel.org/r/20251218074300.4080-1-lirongqing@baidu.com
Link: https://lkml.kernel.org/r/20251216074521.2796-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying
the atmel_hlcdc_plane state structure without properly duplicating the
drm_plane_state. In particular, state->commit remained set to the old
state commit, which can lead to a use-after-free in the next
drm_atomic_commit() call.
Fix this by calling
__drm_atomic_helper_duplicate_plane_state(), which correctly clones
the base drm_plane_state (including the ->commit pointer).
It has been seen when closing and re-opening the device node while
another DRM client (e.g. fbdev) is still attached:
=============================================================================
BUG kmalloc-64 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b
FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b
Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0
pid=29
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_framebuffer_remove+0x4cc/0x5a8
drm_mode_rmfb_work_fn+0x6c/0x80
process_one_work+0x12c/0x2cc
worker_thread+0x2a8/0x400
kthread+0xc0/0xdc
ret_from_fork+0x14/0x28
Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0
pid=169
drm_atomic_helper_commit_hw_done+0x100/0x150
drm_atomic_helper_commit_tail+0x64/0x8c
commit_tail+0x168/0x18c
drm_atomic_helper_commit+0x138/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0
flags=0x200(workingset|zone=0)
Object 0xc611b340 @offset=832 fp=0xc611b7c0
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-2-79b615130dc3@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-1-79b615130dc3@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Analog connectors may be hot-plugged unlike other connector
types that don't support HPD.
Stop DRM from polling other connector types that don't
support HPD, such as eDP, LVDS, etc. These were wrongly
polled when analog connector support was added,
causing issues with the seamless boot process.
Fixes: c4f3f114e7 ("drm/amd/display: Poll analog connectors (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e924c7004b)
If fence emit fails, free the fence if necessary.
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5eb680a060)
Restrictions on debugging cooperative launch for GFX11 devices should
align to CWSR work around requirements.
i.e. devices without the need for the work around should not be subject
to such restrictions.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 230ef3977d)
If drm_sched_job_init fails, hw_vm_fence is not freed currently,
then cause memory leak.
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Link: https://lore.kernel.org/amd-gfx/a5a828cb-0e4a-41f0-94c3-df31e5ddad52@amd.com/T/#t
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d42ee457c)
Remove emit_frame_cntl function for gfx v12, which is not support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5aaa5058de)
Cc: stable@vger.kernel.org
An (admittedly problematic) optimization change in LLVM 20 [1] turns
known division by zero into the equivalent of __builtin_unreachable(),
which invokes undefined behavior if it is encountered in a control flow
graph, destroying code generation. When compile testing for x86_64,
objtool flags an instance of this optimization triggering in
msm_dp_ctrl_config_msa(), inlined into msm_dp_ctrl_on_stream():
drivers/gpu/drm/msm/msm.o: warning: objtool: msm_dp_ctrl_on_stream(): unexpected end of section .text.msm_dp_ctrl_on_stream
The zero division happens if the else branch in the first if statement
in msm_dp_ctrl_config_msa() is taken because pixel_div is initialized to
zero and it is not possible for LLVM to eliminate the else branch since
rate is still not known after inlining into msm_dp_ctrl_on_stream().
Transform the if statements into a switch statement with a default case
with the existing error print and an early return to avoid the invalid
division. Add a comment to note this helps the compiler, even though the
case is known to be unreachable. With this, pixel_dev's default zero
initialization can be dropped, as it is dead with this change.
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Link: 37932643ab [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601081959.9UVJEOfP-lkp@intel.com/
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698355/
Link: https://lore.kernel.org/r/20260113-drm-msm-dp_ctrl-avoid-zero-div-v2-1-f1aa67bf6e8e@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Some of error messages in RM reference block index, while other print
the enum value (which is shifted by 1), not to mention that some of the
messages are misleading. Reformat the messages, making them more clear
and also always printing the hardware block name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698774/
Link: https://lore.kernel.org/r/20260115-dpu-fix-dspp-v1-1-b73152c147b3@oss.qualcomm.com
Add support for Display Processing Unit (DPU) version 13.0
on the Kaanapali platform. This version introduces changes
to the SSPP sub-block structure. Add common block and rectangle
blocks to accommodate these structural modifications for
compatibility.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698716/
Link: https://lore.kernel.org/r/20260115092749.533-13-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add support for Kaanapali platform SSPP sub-blocks, which
introduce structural changes including register additions,
removals, and relocations. Add the new common and rectangle
blocks, and update register definitions and handling to
ensure compatibility with DPU v13.0.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698712/
Link: https://lore.kernel.org/r/20260115092749.533-11-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
DPU version 13.0.0 introduces changes to the interrupt register
layout. Update the driver to support these modifications for
proper interrupt handling.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698708/
Link: https://lore.kernel.org/r/20260115092749.533-9-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add DSI PHY support for the Kaanapali platform, Kaanapali introduce
addition of DSI2/DSI2_phy compared to SM8650. However, based on the
HPG diagram, only DSI0_phy and DSI1_phy works.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698705/
Link: https://lore.kernel.org/r/20260115092749.533-7-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Code in dpu_hw_sspp_setup_format() doesn't handle UBWC versions bigger
than 4.0. Replace switch-case with if-else checks, making sure that the
register is initialized on UBWC 5.x (and later) hosts.
Fixes: c2577fc174 ("drm/msm/dpu: Add support for SM8750")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699280/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-4-0987acc0427f@oss.qualcomm.com
Since DPU 8.0 there is a separate register for the second rectangle,
which needs to be programmed with the UBWC config if multirect is being
used. Write pipe's UBWC configuration to the correct register.
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699277/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-3-0987acc0427f@oss.qualcomm.com
As in all other places, the Highest Bank Bit value should be programmed
into the hardware with the offset of -13. Correct the value written
into the register to prevent unpredictable results.
Fixes: 227d4ce0b0 ("drm/msm: Offset MDSS HBB value by 13")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699276/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-2-0987acc0427f@oss.qualcomm.com
As in the previous generations, on UBWC 5.x and 6.x devices the Highest
Bank Bit value should be programmed into the hardware with the offset of
-13. Correct the value written into the register to prevent
unpredictable results.
Fixes: 227d4ce0b0 ("drm/msm: Offset MDSS HBB value by 13")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699274/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-1-0987acc0427f@oss.qualcomm.com
kernel-doc is the last documentation-related tool still living outside of
the tools/docs directory; the time has come to move it over.
[mchehab: fixed kdoc lib location]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <311d17e403524349940a8b12de6b5e91e554b1f4.1768823489.git.mchehab+huawei@kernel.org>
Replace legacy DRM_INFO() logging in the VCE code with drm_info()
helper that takes a struct drm_device.
This provides proper device context in dmesg on multi-GPU systems and
aligns the radeon driver with current DRM logging practices.
Note that this change logs firmware version information at info level
and does not indicate a failure.
Signed-off-by: Mukesh Ogare <mukeshogare871@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Analog connectors may be hot-plugged unlike other connector
types that don't support HPD.
Stop DRM from polling other connector types that don't
support HPD, such as eDP, LVDS, etc. These were wrongly
polled when analog connector support was added,
causing issues with the seamless boot process.
Fixes: c4f3f114e7 ("drm/amd/display: Poll analog connectors (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the typo "miniumum" → "minimum" in a comment in dc_dsc.c.
This typo is already listed in scripts/spelling.txt by commit
8c32002657 ("scripts/spelling.txt: add several more common spelling
mistakes").
Suggested-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Runrun Liu <liurunrun@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Update memory QoS measurement interface.
- Panel inst for monitors.
- Disable FEC when powering down encoders.
- Detect panel type from VSDB.
- Check NULL before accessing a variable.
- Initialize a default to phyd32clk.
- Revert "init dispclk from bootup clock".
- Add IPS residency info to debugfs.
- Ensure link output is disabled in backend reset for PLL_ON.
- Remove unused code.
- Add DMU crash recovery callback to DM.
- Remove coverity comments.
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
