For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
The minimum/maximum DSC input (i.e. pipe) and compressed (i.e. link) BPP
limits are computed already in intel_dp_compute_config_limits(), so
there is no need to do this again in
mst_stream_dsc_compute_link_config() called later. Remove the
corresponding alignments from the latter function and use the
precomputed (aligned and within bounds) maximum pipe BPP and the min/max
compressed BPP values instead as-is.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-21-imre.deak@intel.com
intel_edp_dsc_compute_pipe_bpp() matches now
intel_dp_dsc_compute_pipe_bpp(), remove the former function.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-20-imre.deak@intel.com
Move computing the eDP compressed BPP value to the function computing
this for DP, allowing further simplifications later.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-19-imre.deak@intel.com
If dsc_compute_compressed_bpp() failed with a forced pipe BPP value
(where the forced pipe BPP value itself is valid within the min/max pipe
BPP limits), the function will also fail when called with the maximum
pipe BPP value: dsc_compute_compressed_bpp() will try all compressed
BPPs below the passed in pipe BPP value and if the function failed with
a given (low) compressed BPP value it will also fail with a compressed
BPP value higher than the one which failed already.
Based on the above remove the logic to retry computing a compressed BPP
value with the maximum pipe BPP value if computing the compressed BPP
failed already with the (lower) forced pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-18-imre.deak@intel.com
The maximum pipe BPP value (used as the DSC input BPP) has been aligned
already to the corresponding source/sink input BPP capabilities in
intel_dp_compute_config_limits(). So it isn't needed to perform the same
alignment again in intel_dp_dsc_compute_pipe_bpp() called later, this
function can simply use the already aligned maximum pipe BPP value, do
that.
Also, there is no point in trying pipe BPP values lower than the
maximum: this would only make dsc_compute_compressed_bpp() start with a
lower _compressed_ BPP value, but this lower compressed BPP value has
been tried already when dsc_compute_compressed_bpp() was called with the
higher pipe BPP value (i.e. the first dsc_compute_compressed_bpp() call
tries already all the possible compressed BPP values which are all below
the pipe BPP value passed to it). Simplify the function accordingly
trying only the maximum pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-17-imre.deak@intel.com
The maximum pipe BPP value (used as the DSC input BPP) has been aligned
already to the corresponding source/sink input BPP capabilities in
intel_dp_compute_config_limits(). So it isn't needed to perform the same
alignment again in intel_edp_dsc_compute_pipe_bpp() called later, this
function can simply use the already aligned maximum pipe BPP value, do
that.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-16-imre.deak@intel.com
The minimum/maximum compressed BPP values are aligned/bounded in
intel_dp_compute_link_bpp_limits() to the corresponding source limits.
The minimum compressed BPP value doesn't change afterwards, so no need
to align it again, remove that.
The maximum compressed BPP, which depends on the pipe BPP value still
needs to be aligned, since the pipe BPP value could change after the
above limits were computed, via intel_dp_force_dsc_pipe_bpp(). Use the
corresponding helper for this alignment instead of open-coding the same.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-15-imre.deak@intel.com
Atm, a DP DSC video mode's required BW vs. the available BW is
determined by calculating the maximum compressed BPP value allowed by
the available BW. Doing that using a closed-form formula as it's done
atm (vs. an iterative way) is problematic, since the overhead of the
required BW itself depends on the BPP value being calculated. Instead of
that calculate the required BW for the minimum compressed BPP value
supported both by the source and the sink and check this BW against the
available BW. This change also aligns the BW calculation during mode
validation with how this is done during state computation, calculating
the required effective data rate with the corresponding BW overhead.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-14-imre.deak@intel.com
Add intel_dp_mode_valid_with_dsc() and call this for an SST/MST mode
validation to prepare for a follow-up change using a way to verify the
mode's required BW the same way this is done elsewhere during state
computation (which in turn depends on the mode's effective data rate
with the corresponding BW overhead).
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-13-imre.deak@intel.com
Factor out compute_max_compressed_bpp_x16() also used during mode
validation in a follow-up change.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-12-imre.deak@intel.com
Factor out compute_min_compressed_bpp_x16() also used during mode
validation in a follow-up change.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-11-imre.deak@intel.com
Prepare for follow-up changes using dsc_throughput_quirk_max_bpp_x16()
without an intel_crtc_state pointer.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-10-imre.deak@intel.com
Prepare for follow-up changes also calling
intel_dp_dsc_min_sink_compressed_bpp() /
intel_dp_dsc_max_sink_compressed_bpp_x16()
without an intel_crtc_state.
While at it remove the stale function declarations from the header file.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-9-imre.deak@intel.com
The intel_dp pointer can be deducted from the connector pointer, so it's
enough to pass only connector to
intel_dp_compute_config_link_bpp_limits(), do so.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-8-imre.deak@intel.com
Align the minimum/maximum DSC compressed BPPs to the corresponding
source compressed BPP limits already when computing the BPP limits. This
alignment is also performed later during state computation, however
there is no reason to initialize the limits to an unaligned/incorrect
value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-7-imre.deak@intel.com
Align the minimum/maximum DSC input BPPs to the corresponding sink DSC
input BPP capability limits already when computing the BPP limits. This
alignment is also performed later during state computation, however
there is no reason to initialize the limits to an unaligned/incorrect
value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-6-imre.deak@intel.com
Factor out align_max_vesa_compressed_bpp_x16(), also used later for
computing the maximum DSC compressed BPP limit.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-5-imre.deak@intel.com
Factor out align_max_sink_dsc_input_bpp(), also used later for computing
the maximum DSC input BPP limit.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-4-imre.deak@intel.com
Drop the unused timeslots parameter from dsc_compute_link_config() and
other functions calling it.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-2-imre.deak@intel.com
On some platforms, notably MediaTek MT8196, the shader_present bitmask
in the Mali GPU register for it has cores enabled that may be faulty.
The true shader_present bitmask is found in an efuse instead.
Implement reading shader_present from an nvmem cell if one is present,
falling back to the Mali register if it's absent. The error codes are
trickled up through to the probe function so that probe deferral works.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251220-mt8196-shader-present-v2-3-45b1ff1dfab0@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Replace DRM_ERROR() and DRM_DEBUG_DRIVER() calls in
drivers/gpu/drm/mediatek/mtk_crtc.c with the corresponding drm_err()
and drm_dbg_driver() helpers.
The drm_*() logging helpers take a struct drm_device * argument,
allowing the DRM core to prefix log messages with the correct device
name and instance. This is required to correctly distinguish log
messages on systems with multiple GPUs.
This change aligns the Mediatek DRM driver with the DRM TODO item:
"Convert logging to drm_* functions with drm_device parameter".
Reported-by: kernel test robot <lkp@intel.com>
Closes:
https://lore.kernel.org/oe-kbuild-all/202512220515.z3QybJ8I-lkp@intel.com/
Signed-off-by: Abhishek Rajput <abhiraj21put@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251223095434.492041-1-abhiraj21put@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences.
Cc: <stable@vger.kernel.org> # 6.18.x
Fixes: 73cfd166e0 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20251231055039.44266-1-me@shenghaoyang.info
The callbacks .probe(), .remove() and .shutdown() for device_drivers
should go away. So migrate to bus methods. There are two differences
that need addressing:
- The bus remove callback returns void while the driver remove callback
returns int (the actual value is ignored by the core).
- The bus shutdown callback is also called for unbound devices, so an
additional check for dev->driver != NULL is needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/dd55d034c68953268ea416aa5c13e41b158fcbb4.1765355236.git.u.kleine-koenig@baylibre.com
The return value of struct device_driver::remove is ignored by the core
(see device_remove() in drivers/base/dd.c). So it doesn't make sense to
let the host1x remove callback return an int just to ignore it later.
So make the callback return void. All current implementors return 0, so
they are easily converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/d364fd4ec043d36ee12e46eaef98c57658884f63.1765355236.git.u.kleine-koenig@baylibre.com
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
It's better to use gpiod_set_value_cansleep because the panel can be
connected via i2c/spi expander or similar external devices
for reference see Documentation/driver-api/gpio/consumer.rst
Signed-off-by: Vladimir Yakovlev <vovchkir@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251208161613.3763049-1-vovchkir@gmail.com
This command is part of LIC sequence included in FT8006P firmware.
There's no need to repeat it here.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260105-mantix-halo-fixes-v1-4-1ebc9b195a34@puri.sm
According to the sequence from section 7.3.4 of FT8006P datasheet,
TP_RSTN and RESX should be asserted after disabling AVDD and AVEE and
together with VDDI.
Also, AVEE power down needs to happen at least 150ms after entering
sleep mode.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260105-mantix-halo-fixes-v1-3-1ebc9b195a34@puri.sm
FP8006P datasheet mentions:
> It is necessary to wait 15msec after releasing RESX before sending
> commands. Also Sleep Out command cannot be sent for 120 msec.
This hasn't been respected by the driver so far, which could interfere
with the LCD init code sequence performed by the controller. In some cases
this leads to VCOM voltage being set to a wrong value, causing "halo"
effects, temporary burn-in around the edges of the screen and degraded
image contrast.
T3 and T4 are counted from when VDDI is enabled. There's no need to add
them when we've already waited more than that in T2 and T2d.
While FT8006P datasheet does not mention a delay between exiting sleep
mode and turning the display on, code provided by the vendor uses 120ms
there and it happens to be the same value as required in newer datasheets
for newer controllers from the same family, so it seems appropriate to
use it here as well.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260105-mantix-halo-fixes-v1-2-1ebc9b195a34@puri.sm
This improves reliability of sending DSI commands.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260105-mantix-halo-fixes-v1-1-1ebc9b195a34@puri.sm
In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it
may be NULL:
if (!jdi)
mipi_dsi_detach(dsi);
However, when jdi is NULL, the function does not return and continues by
calling jdi_panel_disable():
err = jdi_panel_disable(&jdi->base);
Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can
lead to a NULL-pointer dereference:
struct jdi_panel *jdi = to_panel_jdi(panel);
backlight_disable(jdi->backlight);
To prevent such a potential NULL-pointer dereference, return early from
jdi_panel_dsi_remove() when jdi is NULL.
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218120955.11185-1-islituo@gmail.com
Add support for the Innolux G150XGE-L05 15.0" TFT 1024x768 LVDS panel.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260102141706.36842-2-festevam@gmail.com
Migrate the TL121BVMS07 panel from non-DSC 60 Hz to DSC-enabled 120 Hz,
including updated init sequence, DSC configuration, and display timings.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251216075530.1966327-1-yelangyan@huaqin.corp-partner.google.com
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cc41f29a6b ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/697613/
Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-24-535a3ed73bf3@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Currently MDP5 3.x (MSM8998, SDM630 and SDM660) platforms are support
by both DPU and MDP5 drivers. Support for them in the DPU driver is
mature enough, so it's no longer sensible to keep them enabled in the
MDP5 driver. Not to mention that MSM8998 never used an MDP5 compatible
string. Drop support for the MDP5 3.x genration inside the MDP5
driver and migrate those to the DPU driver only.
Note: this will break if one uses the DT generated before v6.3 as they
had only the generic, "qcom,mdp5" compatible string for SDM630 and
SDM660. However granted that we had two LTS releases inbetween I don't
think it is an issue.
Patchwork: https://patchwork.freedesktop.org/patch/696491/
Link: https://lore.kernel.org/r/20251228-mdp5-drop-dpu3-v4-3-7497c3d39179@oss.qualcomm.com
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The _dpu_format_populate_plane_sizes_ubwc() used MSM_MEDIA_ALIGN() and
MSM_MEDIA_ROUNDUP(), macros inherited from the previous implementation,
msm_media_info.h. Replace them with the standard Linux macros,
round_up() and DIV_ROUND_UP() respectively.
Patchwork: https://patchwork.freedesktop.org/patch/688182/
Link: https://lore.kernel.org/r/20251114-dpu-formats-v3-12-cae312379d49@oss.qualcomm.com
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcm6490-fairphone-fp5
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Drop redundant layout->num_planes assignments, using the value assigned
from the formats table. RGB UBWC formats need special handling: they use
two planes (per the format table), but the uAPI defines plane[1] as
empty.
Reviewed-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688180/
Link: https://lore.kernel.org/r/20251114-dpu-formats-v3-10-cae312379d49@oss.qualcomm.com
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcm6490-fairphone-fp5
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
