When IOVA-based DMA mapping is unavailable (e.g., IOMMU
passthrough mode), rdma_rw_ctx_init_bvec() falls back to
checking rdma_rw_io_needs_mr() with the raw bvec count.
Unlike the scatterlist path in rdma_rw_ctx_init(), which
passes a post-DMA-mapping entry count that reflects
coalescing of physically contiguous pages, the bvec path
passes the pre-mapping page count. This overstates the
number of DMA entries, causing every multi-bvec RDMA READ
to consume an MR from the QP's pool.
Under NFS WRITE workloads the server performs RDMA READs
to pull data from the client. With the inflated MR demand,
the pool is rapidly exhausted, ib_mr_pool_get() returns
NULL, and rdma_rw_init_one_mr() returns -EAGAIN. svcrdma
treats this as a DMA mapping failure, closes the connection,
and the client reconnects -- producing a cycle of 71% RPC
retransmissions and ~100 reconnections per test run. RDMA
WRITEs (NFS READ direction) are unaffected because
DMA_TO_DEVICE never triggers the max_sgl_rd check.
Remove the rdma_rw_io_needs_mr() gate from the bvec path
entirely, so that bvec RDMA operations always use the
map_wrs path (direct WR posting without MR allocation).
The bvec caller has no post-DMA-coalescing segment count
available -- xdr_buf and svc_rqst hold pages as individual
pointers, and physical contiguity is discovered only during
DMA mapping -- so the raw page count cannot serve as a
reliable input to rdma_rw_io_needs_mr(). iWARP devices,
which require MRs unconditionally, are handled by an
earlier check in rdma_rw_ctx_init_bvec() and are unaffected.
Fixes: bea28ac14c ("RDMA/core: add MR support for bvec-based RDMA operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260313194201.5818-3-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When IOMMU passthrough mode is active, ib_dma_map_sgtable_attrs()
produces no coalescing: each scatterlist page maps 1:1 to a DMA
entry, so sgt.nents equals the raw page count. A 1 MB transfer
yields 256 DMA entries. If that count exceeds the device's
max_sgl_rd threshold (an optimization hint from mlx5 firmware),
rdma_rw_io_needs_mr() steers the operation into the MR
registration path. Each such operation consumes one or more MRs
from a pool sized at max_rdma_ctxs -- roughly one MR per
concurrent context. Under write-intensive workloads that issue
many concurrent RDMA READs, the pool is rapidly exhausted,
ib_mr_pool_get() returns NULL, and rdma_rw_init_one_mr() returns
-EAGAIN. Upper layer protocols treat this as a fatal DMA mapping
failure and tear down the connection.
The max_sgl_rd check is a performance optimization, not a
correctness requirement: the device can handle large SGE counts
via direct posting, just less efficiently than with MR
registration. When the MR pool cannot satisfy a request, falling
back to the direct SGE (map_wrs) path avoids the connection
reset while preserving the MR optimization for the common case
where pool resources are available.
Add a fallback in rdma_rw_ctx_init() so that -EAGAIN from
rdma_rw_init_mr_wrs() triggers direct SGE posting instead of
propagating the error. iWARP devices, which mandate MR
registration for RDMA READs, and force_mr debug mode continue
to treat -EAGAIN as terminal.
Fixes: 00bd1439f4 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260313194201.5818-2-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f4 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The bvec-based RDMA API currently returns -EOPNOTSUPP when Memory
Region registration is required. This prevents iWARP devices from
using the bvec path, since iWARP requires MR registration for RDMA
READ operations. The force_mr debug parameter is also unusable with
bvec input.
Add rdma_rw_init_mr_wrs_bvec() to handle MR registration for bvec
arrays. The approach creates a synthetic scatterlist populated with
DMA addresses from the bvecs, then reuses the existing ib_map_mr_sg()
infrastructure. This avoids driver changes while keeping the
implementation small.
The synthetic scatterlist is stored in the rdma_rw_ctx for cleanup.
On destroy, the MRs are returned to the pool and the bvec DMA
mappings are released using the stored addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-4-cel@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The bvec RDMA API maps each bvec individually via dma_map_phys(),
requiring an IOTLB sync for each mapping. For large I/O operations
with many bvecs, this overhead becomes significant.
The two-step IOVA API (dma_iova_try_alloc / dma_iova_link /
dma_iova_sync) allocates a contiguous IOVA range upfront, links
all physical pages without IOTLB syncs, then performs a single
sync at the end. This reduces IOTLB flushes from O(n) to O(1).
It also requires only a single output dma_addr_t compared to extra
per-input element storage in struct scatterlist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-3-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The existing rdma_rw_ctx_init() API requires callers to construct a
scatterlist, which is then DMA-mapped page by page. Callers that
already have data in bio_vec form (such as the NVMe-oF target) must
first convert to scatterlist, adding overhead and complexity.
Introduce rdma_rw_ctx_init_bvec() and rdma_rw_ctx_destroy_bvec() to
accept bio_vec arrays directly. The new helpers use dma_map_phys()
for hardware RDMA devices and virtual addressing for software RDMA
devices (rxe, siw), avoiding intermediate scatterlist construction.
Memory registration (MR) path support is deferred to a follow-up
series; callers requiring MR-based transfers (iWARP devices or
force_mr=1) receive -EOPNOTSUPP and should use the scatterlist API.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-2-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
dma_map_sg() now supports the use of P2PDMA pages so pci_p2pdma_map_sg()
is no longer necessary and may be dropped. This means the
rdma_rw_[un]map_sg() helpers are no longer necessary. Remove it all.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move the check for the actual pgmap types that need the free at refcount
one behavior into the out of line helper, and thus avoid the need to
pull memremap.h into mm.h.
Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
There are a couple of subtle error path bugs related to mapping the sgls:
- In rdma_rw_ctx_init(), dma_unmap would be called with an sg that could
have been incremented from the original call, as well as an nents that
is the dma mapped entries not the original number of nents called when
mapped.
- Similarly in rdma_rw_ctx_signature_init, both sg and prot_sg were
unmapped with the incorrect number of nents.
To fix this, switch to the sgtable interface for mapping which
conveniently stores the original nents for unmapping. This will get
cleaned up further once the dma mapping interface supports P2PDMA and
pci_p2pdma_map_sg() can be removed.
Fixes: 0e353e34e1 ("IB/core: add RW API support for signature MRs")
Fixes: a060b5629a ("IB/core: generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/20211001213215.3761-1-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since RDMA rw API support operations with P2P memory sg list, make sure to
map/unmap the scatter list for signature operation correctly.
Link: https://lore.kernel.org/r/20200220100819.41860-2-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case the SGL was mapped for P2P DMA operation, we must unmap it using
pci_p2pdma_unmap_sg during the error unwind of rdma_rw_ctx_init()
Fixes: 7f73eac3a7 ("PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()")
Link: https://lore.kernel.org/r/20200220100819.41860-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If there are more scatter entries than the recommended limit provided by
the ib device, UMR registration is used. This will provide optimal
performance when performing large RDMA READs over devices that advertise
the threshold capability.
With ConnectX-5 running NVMeoF RDMA with FIO single QP 128KB writes:
Without use of cap: 70Gb/sec
With use of cap: 84Gb/sec
Link: https://lore.kernel.org/r/20191007135933.12483-3-leon@kernel.org
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Replace the old signature handover API with the new one. The new API
simplifes PI handover code complexity for ULPs and improve performance.
For RW API it will reduce the maximum number of work requests per task
and the need of dealing with multiple MRs (and their registrations and
invalidations) per task. All the mappings and registration of the data
and the protection buffers is done by the LLD using a single WR and a
special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation.
The setup of the tested benchmark (using iSER ULP):
- 2 servers with 24 cores (1 initiator and 1 target)
- ConnectX-4/ConnectX-5 adapters
- 24 target sessions with 1 LUN each
- ramdisk backstore
- PI active
Performance results running fio (24 jobs, 128 iodepth) using
write_generate=1 and read_verify=1 (w/w.o patch):
bs IOPS(read) IOPS(write)
---- ---------- ----------
512 1243.3K/1182.3K 1725.1K/1680.2K
4k 571233/528835 743293/748259
32k 72388/71086 71789/93573
Using write_generate=0 and read_verify=0 (w/w.o patch):
bs IOPS(read) IOPS(write)
---- ---------- ----------
512 1572.1K/1427.2K 1823.5K/1724.3K
4k 921992/916194 753772/768267
32k 75052/73960 73180/95484
There is a performance degradation when writing big block sizes.
Degradation is caused by the complexity of combining multiple
indirections and perform RDMA READ operation from it. This will be
fixed in the following patches by reducing the indirections if
possible.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a preparation for adding new signature API to the rw-API.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN
and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a preparation for adding new signature API to the rw-API.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Print the supported and wanted values for SG count during signature
operation.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A wrong value was printed in case of sig MR pool initialization failure.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the correct function name.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to use PCI P2P memory the pci_p2pmem_map_sg() function must be
called to map the correct PCI bus address.
To do this, check the first page in the scatter list to see if it is P2P
memory or not. At the moment, scatter lists that contain P2P memory must
be homogeneous so if the first page is P2P the entire SGL should be P2P.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes: 0e353e34e1 ("IB/core: add RW API support for signature MRs")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
"nents" is an unsigned int, so if ib_map_mr_sg() returns a negative
error code then it's type promoted to a high unsigned int which is
treated as success.
Fixes: a060b5629a ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
prot_sg_cnt cannot be zero as a previous check on ret (from which
prot_sg_cnt is assigned) returns -ENOMEM if is it zero. Since
it cannot be zero we can simplify the code by removing the non
-zero check on prot_sg_cnt and redundant else statement.
Detected by CoverityScan, COD#1357188 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The amount of payload per MR depends on device capabilities and
the memory registration mode in use. The new rdma_rw API hides both,
making it difficult for ULPs to determine how large their transport
send queues need to be.
Expose the MR payload information via a new API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Compute the SGE limit for RDMA READ and WRITE requests in
ib_create_qp(). Use that limit in the RDMA RW API implementation.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org> #v4.7+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some but not all callers of rdma_rw_ctx_init() zero-initialize
struct rdma_rw_ctx. Hence make rdma_rw_ctx_init() initialize all
work request fields that will be read by ib_post_send().
Fixes: a060b5629a ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> #v4.7+
Signed-off-by: Doug Ledford <dledford@redhat.com>
The SRP initiator allows to set max_sectors to a value that exceeds
the largest amount of data that can be mapped at once with an mlx4
HCA using fast registration and a page size of 4 KB. Hence modify
ib_map_mr_sg() such that it can map partial sg-elements. If an
sg-element has been mapped partially, let the caller know
which fraction has been mapped by adjusting *sg_offset.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This supports both manual mapping of lots of SGEs, as well as using MRs
from the QP's MR pool, for iWarp or other cases where it's more optimal.
For now, MRs are only used for iWARP transports. The user of the RDMA-RW
API must allocate the QP MR pool as well as size the SQ accordingly.
Thanks to Steve Wise for testing, fixing and rewriting the iWarp support,
and to Sagi Grimberg for ideas, reviews and fixes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
