The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In ims_pcu_line_setup(), the driver uses pcu->cmd_buf as a transfer
buffer for usb_control_msg(). However, pcu->cmd_buf is embedded in the
struct ims_pcu allocation, which violates DMA mapping rules regarding
cacheline alignment.
Use a heap-allocated buffer for the line coding data instead.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command()
without acquiring pcu->cmd_mutex. This can lead to data races and
corruption of the shared command buffer if triggered concurrently with
other commands.
Acquire pcu->cmd_mutex before calling ims_pcu_execute_command().
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver currently trusts the bMasterInterface0 from the CDC union
descriptor without verifying that it matches the interface being
probed. This could lead to the driver overwriting the private data of
another interface.
Validate that the control interface found in the descriptor is indeed
the one we are probing.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ims_pcu_disconnect() only intended to perform cleanup when the primary
(control) interface is unbound. However, it currently relies on the
interface class to distinguish between control and data interfaces.
A malicious device could present a data interface with the same class
as the control interface, leading to premature cleanup and potential
use-after-free or double-free.
Switch to verifying that the interface being disconnected is indeed
the control interface.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
During probe the driver claims the data interface, but it never releases
it. Release it in disconnect to avoid leaving it permanently claimed.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ims_pcu_reset_packet() incorrectly sets have_stx to true, which implies
that the start-of-packet delimiter has already been received. This
causes the protocol parser to skip waiting for the next STX byte and
potentially process garbage data.
Correctly set have_stx to false when resetting the packet state.
Fixes: 875115b82c ("Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the driver was converted to use the driver core to instantiate device
attributes (via .dev_groups in the usb_driver structure), the attributes
started appearing on all interfaces bound to the driver. Since the ims-pcu
driver manually claims the secondary data interface during probe, the
driver core automatically creates the sysfs attributes for that interface
as well.
However, the driver only supports these attributes on the primary control
interface. Data interfaces lack the necessary descriptors and internal
state to handle these requests, and accessing them can lead to unexpected
behavior or crashes.
Fix this by updating the is_visible() callbacks for both the main and OFN
attribute groups to verify that the interface being accessed is indeed the
control interface.
Fixes: 204d18a7a0 ("Input: ims-pcu - use driver core to instantiate device attributes")
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ahp23lj4_vXIeUBl@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Rework the driver to use modern style:
- Remove global state by introducing a per-device structure
- Use devm for resource management (input device allocation)
- Use dev_err_probe() for error reporting in the probe path
- Clean up unused definitions and headers.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/ahp6qt_viW3l-NlX@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Simplify resource mapping by using devm_platform_ioremap_resource()
instead of the longer devm_platform_get_and_ioremap_resource() helper
as the last argument is NULL.
Additionally, use platform_get_irq() to retrieve the interrupt
instead of irq_of_parse_and_map() and propagate its error code on
failure. irq_of_parse_and_map() requires irq_dispose_mapping, which is
missing.
Assisted-by: Antigravity:Gemini-3.5-Flash
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260603192415.6679-1-rosenp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove the Xilinx XPS PS/2 controller driver. This driver supports an
old Xilinx EDK IP core that is no longer in active use. The hardware
is not available on modern platforms, and the driver has no users here.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260603054217.442016-1-rosenp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Lenovo Yoga Air 14 (83QK) laptop keyboard becomes unresponsive
after the standard atkbd init sequence. Controlled testing on the
actual hardware shows the F5 (ATKBD_CMD_RESET_DIS / deactivate)
command specifically corrupts the EC state, causing zero IRQ1
interrupts after init.
Skipping only the deactivate command (while keeping F4 ENABLE)
resolves the issue completely: both keystroke input and CapsLock
LED toggle work correctly. The reverse test - skipping only F4
while keeping F5 - makes the problem worse (zero keystroke
interrupts), confirming F5 is the sole culprit.
Add a DMI quirk entry for LENOVO/83QK using the existing
atkbd_deactivate_fixup callback, consistent with the existing
entries for LG Electronics and HONOR FMB-P that address the
same EC F5 deactivate issue.
Signed-off-by: Zeyu WANG <zeyu.thomas.wang@gmail.com>
Link: https://patch.msgid.link/20260602170909.14725-1-zeyu.thomas.wang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously, only the type value was settable. The proto value is used
internally for choosing the right drivers, so we should expose it. The
other values make sense to expose as well.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://patch.msgid.link/20260522015040.3953472-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into next
Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II and
"Nova 2 Lite" from GameSir controllers as well as a fix to prevent a
potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad in
Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when
tearing it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCahvBFwAKCRBAj56VGEWX
nP7XAQDH9WIYBX7XEHSPInN6GH8GngWA/94v3b6UpBSL2UFdQQEAo1+WoyOGL/Dh
0U0g5CcvDwx9irF8qJBWX2a3DRNPngo=
=hDBA
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II
and "Nova 2 Lite" from GameSir controllers as well as a fix to
prevent a potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad
in Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when tearing
it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
* tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()
Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490
Input: atlas - check ACPI_COMPANION() against NULL
Input: atmel_mxt_ts - check mem_size before calculating config memory size
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
Input: fm801-gp - simplify initialisation of pci_device_id array
Input: xpad - add "Nova 2 Lite" from GameSir
Input: xpad - add support for ASUS ROG RAIKIRI II
Input: elan_i2c - validate firmware size before use
Input: xpad - fix out-of-bounds access for Share button
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
Input: elan_i2c - increase device reset wait timeout after update FW
Input: elan_i2c - add ic type 0x19
The driver doesn't make use of the value that was explicitly assigned to
the .driver_data members. Drop the assignment. While touching the array,
convert it to use named initialization which is easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515165135.498505-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add driver for Wacom W9002 and two Wacom W9007A variants. These are
penabled touchscreens supporting passive Wacom Pens and use I2C.
Co-developed-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Hendrik Noack <hendrik-noack@gmx.de>
Link: https://patch.msgid.link/20260528074818.12151-3-hendrik-noack@gmx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The input buffer size is pcu->max_in_size, but pcu->max_out_size is
passed to usb_free_coherent().
Change size to match the allocation size.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260522085412.45430-2-fourier.thomas@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Lenovo ThinkPad E490 (PNP ID: LEN2058) has a Synaptics TM3471-020
touchpad that supports SMBus/RMI4 mode but is not listed in
smbus_pnp_ids[]. Without this entry, RMI4 over SMBus is not enabled
by default, and the touchpad falls back to PS/2 mode.
Adding LEN2058 to the passlist enables automatic RMI4 detection without
requiring the psmouse.synaptics_intertouch parameter, and matches
the behavior of similar ThinkPad models already in the list
(E480/LEN2054, E580/LEN2055).
Tested on ThinkPad E490 with kernel 7.0.5-zen1 and Arch Linux.
RMI4 over SMBus is confirmed working without any kernel parameters.
Signed-off-by: Nicolás Bazaes <contacto@bazaes.cl>
Assisted-by: Claude:claude-sonnet-4-6
Link: https://patch.msgid.link/20260514013552.14234-1-contacto@bazaes.cl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
atlas_btns driver.
Fixes: b8303880b6 ("Input: atlas - convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8696590.T7Z3S40VBb@rafael.j.wysocki
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the __free(kfree) macro for the obuf allocation in mxt_object_show()
to simplify the code.
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In mxt_update_cfg(), the driver calculates the memory size needed to store
the configuration as data->mem_size - cfg.start_ofs. If data->mem_size is
less than or equal to cfg.start_ofs, this calculation will underflow or
result in a zero-size buffer, neither of which is valid for a configuration
update.
Add a check to return -EINVAL if data->mem_size is too small. While at it,
change the types of start_ofs and mem_size in struct mxt_cfg to u16 to
match the device address space.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260504185448.4055973-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=.
Fixes: 50a77c658b ("Input: atmel_mxt_ts - download device config using firmware loader")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of assigning the pci_device_id members using a list (which is
hard to read as you need to look at the order of the members in that
struct in parallel) use the PCI_VDEVICE() convenience macro to compact
the initialisation while improving readability.
Also drop trailing zeros that the compiler will care about then.
The change doesn't introduce binary changes to the compiled driver,
verified on both ARCH=x86 and ARCH=arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507160051.3315630-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current implementation sends a separate power-down command
after reading the Z2 value, resulting in an extra I2C
transaction per measurement cycle.
The TSC2007 command byte contains a 2-bit power-down mode
selection field. By selecting the power-down state in the Z2
measurement command, the device powers down after the Z2 A/D
conversion completes, eliminating the subsequent power-down
transaction.
This reduces the number of I2C transactions by one per touch
measurement cycle, decreasing I2C bus overhead and improving
touch sampling performance.
Signed-off-by: Yuki Horii <yuuki198708@gmail.com>
Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04
Link: https://patch.msgid.link/20260410074100.1660-1-horiiyuk@ishida.co.jp
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The calculations done to obtain byte_offset can result into a negative
number, fix its type.
This patch fixes the following sparse error:
drivers/input/touchscreen/atmel_mxt_ts.c:1481:44: warning: unsigned value that used to be signed checked against zero?
drivers/input/touchscreen/atmel_mxt_ts.c:1479:49: signed value source
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504-fix-sparse-v1-1-1071137cd280@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the VID/PIDs for the ASUS ROG RAIKIRI II controller to xpad_device
and the VID to xpad_table. The controller has a physical PC/XBOX toggle
which switches between XBOX360 and XBOXONE protocols.
Signed-off-by: Dmitriy Zharov <contact@zharov.dev>
Link: https://patch.msgid.link/20260430183522.122151-1-contact@zharov.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for the ezx series of phones was removed in 2022, this
driver is just dead code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260430164326.2766500-2-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for the ezx series of phones was removed in 2022, this
driver is just dead code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260430164326.2766500-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ensure that the firmware file is large enough to contain the expected
number of pages and the signature (which resides at the end of the
firmware blob) before accessing them to prevent potential out-of-bounds
reads.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ae2dOgiFvXRm4BHo@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4ef4636707 ("Input: xpad - fix Share button on Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5197424cdc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for an optional "reset-gpios" property. If present, the
driver drives the reset line high at probe time and releases it during
power-on, after the regulators have been enabled.
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260409-stmfts5-v4-8-64fe62027db5@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make code cleaner, compiler will optimize it away anyway.
Preparation for FTM5 support, where more steps are needed.
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260409-stmfts5-v4-6-64fe62027db5@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We must power off regulators and ensure that IRQ is disabled when
failing at power on phase. Create stmfts_configure function to limit
use of goto.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260409-stmfts5-v4-5-64fe62027db5@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to devm_regulator_bulk_get_const() to stop setting the supplies
list in probe(), and move the regulator_bulk_data struct in static const.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260409-stmfts5-v4-3-64fe62027db5@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
value does not declare the module's exact license, but only lets the
module loader test whether the module is Free Software or not.
See commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs.
"GPL v2" bogosity") in the details of the issue. The fix is to use
"GPL" for all modules under any variant of the GPL.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260409-stmfts5-v4-1-64fe62027db5@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaeji/QAKCRBAj56VGEWX
nGHgAP4n7O4oAR9Oik3zKLN095LPpMumqSMTQ8o3TpKzNWql2AEAscjPpRoCGdPA
94CsBVwFYBYkiWd2l5lye7WvK2tNrgI=
=pNNY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
