Currently, the TPS65219 driver unconditionally registers a poweroff
handler. This causes issues on systems where a different component
(such as TF-A firmware) should handle system poweroff instead.
Make the poweroff handler registration conditional based on the
"system-power-controller" device tree property. This follows the
standard kernel pattern where only the designated power controller
registers for system poweroff operations.
On systems where the property is absent, the PMIC will not register
a poweroff handler, allowing other poweroff mechanisms to function.
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
Link: https://patch.msgid.link/20260401112257.1248437-3-a-kaur@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The TPS65214 PMIC variant has a LOCK_REG register that prevents writes to
nearly all registers when locked. Unlock the registers at probe time and
leave them unlocked permanently.
This approach is justified because:
- Register locking is very uncommon in typical system operation
- No code path is expected to lock the registers during runtime
- Adding a custom regmap write function would add overhead to every
register write, including voltage changes triggered by CPU OPP
transitions from the cpufreq governor which could happen quite
frequently
Cc: stable@vger.kernel.org
Fixes: 7947219ab1 ("mfd: tps65219: Add support for TI TPS65214 PMIC")
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251218-fix_tps65219-v5-1-8bb511417f3a@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
'struct regmap_irq_sub_irq_map' and 'struct tps65219_chip_data' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
27804 10016 256 38076 94bc drivers/mfd/tps65219.o
After:
=====
text data bss dec hex filename
27893 9792 256 37941 9435 drivers/mfd/tps65219.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/117946696551de41b706ea9b973a7ccaacea5178.1750530460.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Static 'struct reg_sequence' array, 'struct regmap_irq_sub_irq_map' and
'struct regmap_irq_chip ' are not modified so can be changed to const
for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250528194416.567127-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Use chip ID and chip_data struct to differentiate between 3 PMIC devices in
probe(). Add TPS65214 resource information. Update descriptions and
copyright information to reflect the driver supports 3 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-6-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use chip ID and chip_data struct to differentiate between devices in
probe(). Add TPS65215 resource information. Update descriptions and
copyright information to reflect the driver supports 2 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-5-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The chipid macro/variable and regmap_read function call is not needed
because the TPS65219_REG_TI_DEV_ID register value is not a consistent value
across TPS65219 PMIC config versions. Reading from the DEV_ID register
without a consistent value to compare it to isn't useful. There isn't a
way to verify the match data ID is the same ID read from the DEV_ID device
register. 0xF0 isn't a DEV_ID value consistent across TPS65219 NVM
configurations.
For TPS65215, there is a consistent value in bits 5-0 of the DEV_ID
register. However, there are other error checks in place within probe()
that apply to both PMICs rather than keeping this isolated check for one
PMIC.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-4-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use MFD_CELL macro helpers instead of plain struct properties, which makes
the code shorter with the common defined MFD cell attributes.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-2-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use new API for power-off mode support:
Link: https://lwn.net/Articles/894511/
Link: https://lore.kernel.org/all/7hfseqa7l0.fsf@baylibre.com/
sys-off API allows support of shutdown handler and restart handler.
Shutdown was not supported before that enhancement.
This is required for platform that are not using PSCI.
Test:
- restart:
# reboot
Default is cold reset:
# cat /sys/kernel/reboot/mode
Switch boot mode to warm reset:
# echo warm > /sys/kernel/reboot/mode
- power-off:
# halt
Tested on AM62-LP-SK board.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Suggested-by: Andrew Davis <afd@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230608071947.3467751-1-jneanne@baylibre.com
TPS65219 PMIC GPIOs are exposed in a standard way:
gpiodetect
gpiochip0 [tps65219-gpio] (3 lines)
tps65219-gpios is incorrect cell name (plural). Changed to
tps65219-gpio (singular)
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230511-tps65219-add-gpio-support-v5-2-ebb94281c854@baylibre.com
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
The TPS65219 is a power management IC PMIC designed to supply a wide
range of SoCs in both portable and stationary applications. Any SoC can
control TPS65219 over a standard I2C interface.
It contains the following components:
- Regulators.
- Over Temperature warning and Shut down.
- GPIOs
- Multi Function Pins (MFP)
- power-button
This patch adds support for tps65219 PMIC. At this time only
the functionalities listed below are made available:
- Regulators probe and functionalities
- warm and cold reset support
- SW shutdown support
- Regulator warnings via IRQs
- Power-button via IRQ
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221104152311.1098603-5-jneanne@baylibre.com
