ovpn updates dev->dstats from both process and softirq contexts. In
particular, TCP paths may run from socket callbacks, workqueues or
strparser work, while UDP receive and ovpn's ndo_start_xmit path may
update the same per-device dstats from BH context.
Add ovpn device drop-stat helpers that disable BHs around
dev_dstats_rx_dropped() and dev_dstats_tx_dropped(), and use them for
drop accounting.
The successful RX dev_dstats_rx_add() update is already covered by the
BH-disabled section around gro_cells_receive(). For the successful TCP
TX dev_dstats_tx_add() update, replace the existing preempt-disabled
section with a BH-disabled one.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert all drivers currently utilizing ipv6_stub to make direct
function calls. The fallback functions introduced previously will
prevent linkage errors when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260325120928.15848-7-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During initialization, we override socket callbacks and set sk_user_data
to an ovpn_socket instance. Currently, these two operations are
decoupled: callbacks are overridden before sk_user_data is set. While
existing callbacks perform safety checks for NULL or non-ovpn
sk_user_data, this condition causes a "half-formed" state where valid
packets arriving during attachment trigger error logs (e.g., "invoked on
non ovpn socket").
Set sk_user_data before overriding the callbacks so that it can be
accessed safely from them. Since we already check that the socket has no
sk_user_data before setting it, this remains safe even if an interrupt
accesses the socket after sk_user_data is set but before the callbacks
are overridden.
This also requires initializing all protocol-specific fields (such as
tcp_tx_work and peer links) before calling ovpn_socket_attach, ensuring
the ovpn_socket is fully formed before it becomes visible to any
callback.
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
OpenVPN allows users to configure a FW mark on sockets used to
communicate with other peers. The mark is set by means of the
`SO_MARK` Linux socket option.
However, in the ovpn UDP code path, the socket's `sk_mark` value is
currently ignored and it is not propagated to outgoing `skbs`.
This commit ensures proper inheritance of the field by setting
`skb->mark` to `sk->sk_mark` before handing the `skb` to the network
stack for transmission.
Fixes: 08857b5ec5 ("ovpn: implement basic TX path (UDP)")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31877.html
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Removing a peer while userspace attempts to close its transport
socket triggers a race condition resulting in the following
crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000077: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000003b8-0x00000000000003bf]
CPU: 12 UID: 0 PID: 162 Comm: kworker/12:1 Tainted: G O 6.15.0-rc2-00635-g521139ac3840 #272 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-20240910_120124-localhost 04/01/2014
Workqueue: events ovpn_peer_keepalive_work [ovpn]
RIP: 0010:ovpn_socket_release+0x23c/0x500 [ovpn]
Code: ea 03 80 3c 02 00 0f 85 71 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d bc 24 be 03 00 00 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 30
RSP: 0018:ffffc90000c9fb18 EFLAGS: 00010217
RAX: dffffc0000000000 RBX: ffff8881148d7940 RCX: ffffffff817787bb
RDX: 0000000000000077 RSI: 0000000000000008 RDI: 00000000000003be
RBP: ffffc90000c9fb30 R08: 0000000000000000 R09: fffffbfff0d3e840
R10: ffffffff869f4207 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888115eb9300 R14: ffffc90000c9fbc8 R15: 000000000000000c
FS: 0000000000000000(0000) GS:ffff8882b0151000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f37266b6114 CR3: 00000000054a8000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
unlock_ovpn+0x8b/0xe0 [ovpn]
ovpn_peer_keepalive_work+0xe3/0x540 [ovpn]
? ovpn_peers_free+0x780/0x780 [ovpn]
? lock_acquire+0x56/0x70
? process_one_work+0x888/0x1740
process_one_work+0x933/0x1740
? pwq_dec_nr_in_flight+0x10b0/0x10b0
? move_linked_works+0x12d/0x2c0
? assign_work+0x163/0x270
worker_thread+0x4d6/0xd90
? preempt_count_sub+0x4c/0x70
? process_one_work+0x1740/0x1740
kthread+0x36c/0x710
? trace_preempt_on+0x8c/0x1e0
? kthread_is_per_cpu+0xc0/0xc0
? preempt_count_sub+0x4c/0x70
? _raw_spin_unlock_irq+0x36/0x60
? calculate_sigpending+0x7b/0xa0
? kthread_is_per_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x80
? kthread_is_per_cpu+0xc0/0xc0
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: ovpn(O)
This happens because the peer deletion operation reaches
ovpn_socket_release() while ovpn_sock->sock (struct socket *)
and its sk member (struct sock *) are still both valid.
Here synchronize_rcu() is invoked, after which ovpn_sock->sock->sk
becomes NULL, due to the concurrent socket closing triggered
from userspace.
After having invoked synchronize_rcu(), ovpn_socket_release() will
attempt dereferencing ovpn_sock->sock->sk, triggering the crash
reported above.
The reason for accessing sk is that we need to retrieve its
protocol and continue the cleanup routine accordingly.
This crash can be easily produced by running openvpn userspace in
client mode with `--keepalive 10 20`, while entirely omitting this
option on the server side.
After 20 seconds ovpn will assume the peer (server) to be dead,
will start removing it and will notify userspace. The latter will
receive the notification and close the transport socket, thus
triggering the crash.
To fix the race condition for good, we need to refactor struct ovpn_socket.
Since ovpn is always only interested in the sock->sk member (struct sock *)
we can directly hold a reference to it, raher than accessing it via
its struct socket container.
This means changing "struct socket *ovpn_socket->sock" to
"struct sock *ovpn_socket->sk".
While acquiring a reference to sk, we can increase its refcounter
without affecting the socket close()/destroy() notification
(which we rely on when userspace closes a socket we are using).
By increasing sk's refcounter we know we can dereference it
in ovpn_socket_release() without incurring in any race condition
anymore.
ovpn_socket_release() will ultimately decrease the reference
counter.
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Reported-by: Qingfang Deng <dqfext@gmail.com>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/1
Tested-by: Gert Doering <gert@greenie.muc.de>
Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31575.html
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
When deconfiguring a UDP-tunnel from a socket, we cannot
call setup_udp_tunnel_sock() with an empty config, because
this helper is expected to be invoked only during setup.
Get rid of the call to setup_udp_tunnel_sock() and just
revert what it did during socket initialization..
Note that the global udp_encap_needed_key and the GRO state
are left untouched: udp_destroy_socket() will eventually
take care of them.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Fixes: ab66abbc76 ("ovpn: implement basic RX path (UDP)")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/netdev/1a47ce02-fd42-4761-8697-f3f315011cc6@redhat.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
IPv6 user packets (sent over the tunnel) may be larger than
the outgoing interface MTU after encapsulation.
When this happens ovpn should allow the kernel to fragment
them because they are "locally generated".
To achieve the above, we must set skb->ignore_df = 1
so that ip6_fragment() can be made aware of this decision.
Failing to do so will result in ip6_fragment() dropping
the packet thinking it was "routed".
No change is required in the IPv4 path, because when
calling udp_tunnel_xmit_skb() we already pass the
'df' argument set to 0, therefore the resulting datagram
is allowed to be fragmented if need be.
Fixes: 08857b5ec5 ("ovpn: implement basic TX path (UDP)")
Reported-by: Gert Doering <gert@greenie.muc.de>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/3
Tested-by: Gert Doering <gert@greenie.muc.de>
Acked-by: Gert Doering <gert@greenie.muc.de> # as primary user
Link: https://mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31577.html
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
With this change an ovpn instance will be able to stay connected to
multiple remote endpoints.
This functionality is strictly required when running ovpn on an
OpenVPN server.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-14-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packets received over the socket are forwarded to the user device.
Implementation is UDP only. TCP will be added by a later patch.
Note: no decryption/decapsulation exists yet, packets are forwarded as
they arrive without much processing.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-8-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packets sent over the ovpn interface are processed and transmitted to the
connected peer, if any.
Implementation is UDP only. TCP will be added by a later patch.
Note: no crypto/encapsulation exists yet. Packets are just captured and
sent.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-7-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This specific structure is used in the ovpn kernel module
to wrap and carry around a standard kernel socket.
ovpn takes ownership of passed sockets and therefore an ovpn
specific objects is attached to them for status tracking
purposes.
Initially only UDP support is introduced. TCP will come in a later
patch.
Cc: willemdebruijn.kernel@gmail.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-6-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>