Commit graph

870 commits

Author SHA1 Message Date
Linus Torvalds
26ae421f7f pci-v7.2-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmo7CrQUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxsvw/7B4rHdVs1/LERE4H0bBKKNz7mr6g/
 6JOBDYc9ERgZpDgAwBKm+uuFzg8KLK0lf5PU7p2zNxjMVia+c4AMTHw/icN91yfL
 NZLP013GQmZ6s1r290AMnVtUqd1hNm2R+r4nzXTm85y9B25tZIiJj3gssIXPKDTE
 74rrRiNVO9+zj8JTED6kbSoAq40iv94Ux9VnumHy6kF1izsFAht7eJmkICgeOLRX
 okBq86Tqivwv85XpqOQZTHudBwvS91HHsAdClW9UcXyRQo3RJAcba2tkglfZ2Ozo
 RbfqxxKNuW/3TTziOflfzm/oImZuMQdlvu98udMQ+LacOmLN+SWPdyVFly9X87i+
 ZGH4bKxtqcba8EYFZ+VRrG3JNuOWwcfmAPC93WhuwhywJ6evRg9Wufffss6GLUmH
 g9id/KbMI0RRkYnne7w9nmmCwLge0/3klhf5dwyZZ/q9IyKPUqjyagdbjFA4Esp5
 wLK1H9645pXtZtj5h8qMlZQ+rrDt/IYWqsCo15pB1Z4y3Lpb+JaYsHOS+Ye/3PDA
 0MDeCoTvK4scZGtM6l10jn3fdGVy6EL+3thteQz/+FHzmMEXp53TnrQTBhKtdGc0
 RfPLZEMuFCjbr+6u6bSu3thD1eH4TgQHIWY1Fl4FdczXzc6+A6blBY4BSZAqX8kU
 xjNfpptAieR4BtM=
 =h+xD
 -----END PGP SIGNATURE-----

Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
     around a WiFi device defect; use a quirk or boot-time
     "pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)

   - Always lift 2.5GT/s restriction in PCIe failed link retraining to
     avoid clamping a link to 2.5GT/s after hot-plug changes the device
     (Maciej W. Rozycki)

   - Request bus reassignment when not probe-only to fix an enumeration
     regression on Marvell CN106XX and possibly other DT-based systems
     (Ratheesh Kannoth)

   - Fix procfs race between pci_proc_init() and pci_bus_add_device()
     that resulted in 'proc_dir_entry ... already registered' warnings
     and pointer corruption (Krzysztof Wilczyński)

   - Fix sysfs race that causes 'duplicate filename' warnings and boot
     panics by converting PCI resource files to static attributes
     (Krzysztof Wilczyński)

   - Expose sysfs 'resourceN_resize' attributes only on platforms with
     PCI mmap (Krzysztof Wilczyński)

   - Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
     attributes (Krzysztof Wilczyński)

   - Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
     mmap path to match the generic path (Krzysztof Wilczyński)

   - Use kstrtobool() to parse the 'rom' attribute input to avoid the
     unexpected behavior of enabling the ROM when writing '0' with no
     trailing newline (Krzysztof Wilczyński)

  Resource management:

   - Improve resource claim logging for debuggability (Ilpo Järvinen)

   - Clean up several uses of const parameters (Ilpo Järvinen)

   - Check option ROM header signatures and lengths before accessing to
     avoid page faults and alignment faults (Guixin Liu)

  ASPM:

   - Don't reconfigure ASPM when entering low-power D-state; only do it
     when returning back to D0 (Carlos Bilbao)

  Power management:

   - During suspend, set power state to 'unknown' for all devices, not
     just those with drivers (Lukas Wunner)

   - Skip restoring Resizable BARs and VF Resizable BARs if device
     doesn't respond to config reads, to avoid invalid array accesses
     (Marco Nenciarini)

   - Add pci_suspend_retains_context() so drivers can tell whether
     devices retain internal state across suspend/resume, since some
     platforms reset devices on suspend; use this in nvme to avoid
     issues on Qcom RCs (Manivannan Sadhasivam)

  Power control:

   - Only to power on/off devices that actually support power control to
     avoid poking at incompatible devices mentioned in DT (Manivannan
     Sadhasivam)

  Virtualization and resets:

   - Log device readiness timeouts as errors, not warnings, because the
     device is likely unusable in this case (Bjorn Helgaas)

   - Wait for device readiness after soft reset (D3hot ->
     D0uninitialized transition), when the device may respond with
     Request Retry Status (RRS) if it needs more time to initialize
     (Bjorn Helgaas)

   - Drop unnecessary retries when restoring BARs because resets should
     now already include all required delays (Lukas Wunner)

   - Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
     terminates uncleanly (Jose Ignacio Tornos Martinez)

   - Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
     which seem not to support it correctly (Jose Ignacio Tornos
     Martinez)

  Peer-to-peer DMA:

   - Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
     s390 ISM BARs (Matt Evans)

   - Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)

  Endpoint framework:

   - Add endpoint controller APIs for use by function drivers to
     discover auxiliary blocks like DMA engines (Koichiro Den)

   - Remember DesignWare eDMA engine base/size and expose them via the
     EPC aux-resource API (Koichiro Den)

   - Add endpoint embedded doorbell fallback, used if MSI allocation
     fails (Koichiro Den)

   - Validate BAR index and remove dead BAR read in endpoint doorbell
     test (Carlos Bilbao)

   - Unwind MSI/MSI-X vectors if NTB initialization fails part-way
     through (Koichiro Den)

   - Cache sleepable pci_irq_vector() value at ISR setup to avoid
     calling it from hardirq context (Koichiro Den)

   - Call sleepable pci_epc_raise_irq() from a work item instead of
     atomic context, e.g., when setting bits in NTB peer doorbells in
     the ntb_peer_db_set() path (Koichiro Den)

   - Report 0-based vNTB doorbell vector to account for link event 0 and
     historically skipped slot 1 (Koichiro Den)

   - Prevent configfs writes to vNTB db_count and other values that are
     already in use after EPC attach (Koichiro Den)

   - Account for vNTB db_valid reserved slots (link event 0 and
     historically skipped slot 1) so they don't appear as valid
     doorbells (Koichiro Den)

   - Implement vNTB .db_vector_count()/mask() for doorbells so clients
     can use multiple vectors and avoid thundering herds (Koichiro Den)

   - Report 0-based NTB doorbell vector to account for link event 0 and
     historically skipped slot 1 (Koichiro Den)

   - Fix doorbell bitmask and IRQ vector handling to clear only
     specified bits, use the correct vector for non-contiguous Linux IRQ
     numbers, and validate incoming vectors (Koichiro Den)

   - Implement NTB .db_vector_count()/mask() for doorbells so clients
     can use multiple vectors (Koichiro Den)

  Native PCIe controller infrastructure:

   - Add pci_host_common_link_train_delay() for the mandatory delay
     after > 5GT/s Link training completes and use it for cadence HPA,
     j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)

   - Protect root bus removal with rescan lock in altera, brcmstb,
     cadence, dwc, iproc, mediatek, plda, rockchip to prevent
     use-after-free or crashes when racing with sysfs rescan or hotplug
     (Hans Zhang)

   - Add pci_host_common_parse_ports() for use by any native driver to
     parse Root Port properties (per-Link features like width, speed,
     PHY, power and reset control, etc should be described in Root Port
     stanzas, not the host bridge; currently only reset GPIOs
     implemented) (Sherry Sun)

  New native PCIe controller drivers:

   - Add DT binding and driver for UltraRISC DP1000 PCIe controller
     (Xincheng Zhang, Jia Wang)

  Altera PCIe controller driver:

   - Do not dispose of the parent IRQ mapping, which belongs to the
     parent interrupt controller (Mahesh Vaidya)

   - Fix chained IRQ handler ordering issue and resource leaks on probe
     failure (Mahesh Vaidya)

  AMD MDB PCIe controller driver:

   - Assert PERST# on shutdown so any connected Endpoints are held in
     reset during shutdown (Sai Krishna Musham)

  Amlogic Meson PCIe controller driver:

   - Propagate devm_add_action_or_reset() failure to fix probe error
     path (Shuvam Pandey)

   - Add .remove() callback to deinitialize the host bridge and power
     off the PHY (Shuvam Pandey)

  Broadcom iProc PCIe controller driver:

   - Restore .map_irq() assignment; its removal broke INTx on the iproc
     platform bus driver (Mark Tomlinson)

  Broadcom STB PCIe controller driver:

   - No change, but products using certain WiFi devices may be affected
     by removal of CONFIG_PCIE_BUS_* (see above)

  Freescale i.MX6 PCIe controller driver:

   - Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
     functions (Richard Zhu)

   - Assert PERST# before enabling regulators to ensure that even if
     power is enabled, endpoint stays inactive until REFCLK is stable
     (Sherry Sun)

   - Parse reset properties in Root Port nodes (falling back to host
     bridge) to help support Key E connectors and the pwrctrl framework
     (Sherry Sun)

   - Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)

   - Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
     Zhu)

   - Integrate new pwrctrl API for DTs with Root Port-level power
     supplies (Sherry Sun)

  Intel Gateway PCIe controller driver:

   - Enable clock before PHY init for correct ordering (Florian Eckert)

   - Add .start_link() callback so the driver works again (Florian
     Eckert)

   - Stop overwriting the ATU base address discovered by
     dw_pcie_get_resources() (Florian Eckert)

   - Add DT 'atu' region since this is hardware-specific, and fall back
     to driver default if lacking (Florian Eckert)

  Loongson PCIe controller driver:

   - Ignore downstream devices only on internal bridges to avoid
     Loongson hardware issue (Rong Zhang)

   - Quirk old Loongson-3C6000 bridges that advertise incorrect
     supported link speeds (Ziyao Li)

  Marvell MVEBU PCIe controller driver:

   - Use fixed-width interrupt masks to avoid truncation in 64-bit
     builds (Rosen Penev)

  MediaTek PCIe controller driver:

   - Use FIELD_PREP() to fix incorrect operator precedence in
     PCIE_FTS_NUM_L0 (Li RongQing)

   - Fix IRQ domain leak when port fails to enable (Manivannan
     Sadhasivam)

   - Use actual physical address for MSI message address instead of
     virt_to_phys() (Manivannan Sadhasivam)

   - Add EcoNet EN7528 to DT binding (Caleb James DeLisle)

  MediaTek PCIe Gen3 controller driver:

   - Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
     (PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)

   - Add .shutdown() to assert PERST# before powering down device (Jian
     Yang)

   - Do full device power down on removal, including asserting PERST#,
     when removing driver (Chen-Yu Tsai)

   - Fix a 'failed to create pwrctrl devices' error message that was
     inadvertently skipped (Chen-Yu Tsai)

  NVIDIA Tegra194 PCIe controller driver:

   - Program the DesignWare PORT_AFR L1 entrance latency based on the
     'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)

  Qualcomm PCIe controller driver:

   - Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)

   - Set max OPP during resume so DBI register accesses don't fail with
     NoC errors (Qiang Yu)

   - Add pci_host_common_d3cold_possible() to determine whether
     downstream devices are already in D3hot and wakeup-enabled devices
     are capable of generating PME from D3cold (Krishna Chaitanya
     Chundru)

   - Add .get_ltssm() callback to get the LTSSM status without DBI,
     since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
     Chundru)

   - Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
     avoid power leakage (Krishna Chaitanya Chundru)

   - Decide whether suspend should put the link in L2 and power down
     using pci_host_common_d3cold_possible() instead of checking whether
     ASPM L1 is enabled (Krishna Chaitanya Chundru)

   - Add qcom D3cold support to tear down interconnect bandwidth and OPP
     votes (Krishna Chaitanya Chundru)

   - Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
     RP node while PERST# is in the RC node, but warn about the DT issue
     (Qiang Yu)

   - Program T_POWER_ON based on DT 't-power-on-us' property in case
     hardware advertises incorrect values (Krishna Chaitanya Chundru)

   - Disable ASPM L0s for SA8775P (Shawn Guo)

   - Initialize DWC MSI lock for firmware-managed ECAM hosts, which
     don't use the dw_pcie_host_init() path that initializes the lock
     (Yadu M G)

  Renesas RZ/G3S PCIe controller driver:

   - Add RZ/V2N DT support (Lad Prabhakar)

  SOPHGO PCIe controller driver:

   - Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)

  Synopsys DesignWare PCIe controller driver:

   - Apply ECRC TLP Digest workaround for all DesignWare cores prior to
     5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)

   - Use common struct dw_pcie 'mode' rather than duplicating it in
     artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)

   - Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
     boilerplate and fix a seq_file memory leak by including a
     .release() callback (Hans Zhang)

   - Fix a signedness bug in fault injection test code (Dan Carpenter)

   - Avoid NULL pointer dereference when tearing down debugfs for
     controller that lacks RAS DES capability (Shuvam Pandey)

  MicroSemi Switchtec management driver:

   - Add Gen6 Device IDs (Ben Reed)

  Miscellaneous:

   - Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
     visconti drivers (Andy Shevchenko)

   - Fix typos in documentation (josh ziegler)

   - Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"

* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
  PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
  PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
  PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
  PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
  PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
  alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
  PCI: Add macros for legacy I/O and memory address space sizes
  PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
  alpha/PCI: Convert resource files to static attributes
  alpha/PCI: Add static PCI resource attribute macros
  alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
  alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
  alpha/PCI: Use PCI resource accessor macros
  alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
  alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
  PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
  PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
  PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
  PCI/sysfs: Convert PCI resource files to static attributes
  PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
  ...
2026-06-24 12:48:43 -07:00
Linus Torvalds
ba9c792c82 for-7.2/block-20260615
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmowCYEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjUvD/0YcIgniTL/BDQkEQk4+FBVOqLiyPFPhdEY
 z/zxMfvRDcUx48E5t4uDHMFwytugTtymRpmkpLANUuUHHpigLPWhT1kCjzIc8OOU
 534VJ2Ksay5f3i9gVBhpORmdcBokevdmt5KSqvc+it0k+DNUy1o8DJGcQqPSnRtA
 C5Kk6e9QNHpOR30pNygaxtaAsx2rlyrBYw0zWUy7yeUQqI9X+0yZDLC8FUsVDVXW
 fptHqQN4///4zm8DdNvTAGhGPGCAcyciXQbrJKBrH9DlZuD5XzrDBFieuhZ96H6M
 jvr6eL6XlNx3qd/3x9PYsV4zyArTQZw++XLHakNMoP7Gd3ddSVutfKPLN4TZf5ij
 TA4chrhMoIhrubU8LYmDHhTFFCXoRd5NCG5f6JKu7usEzBQVKNO4IJ4fJDA/efeG
 iy3W1mdyAAefLS/DfH+i5foWUJbl5VXe4H/d1o8uIdgU2y8rM9d6NdSFWIHNbvc/
 Dhq47AHExyWONtIpIPnRjgL9lMVqyG0KjmnPLq8hFhPRUzu5XxvxufyhEfCbWBEr
 x6gWvnQlY35DmZYCLzn0FOJRIpYXy49hcJw+FS6fkMaBELhj+OQ7nbaKvCWTw91H
 utTltXKvYjJwisMlzfH6/V2Gv7bE4ytRwRTU5GKQQjYIn572RUe4DPbPd3SGxm6T
 mt9q2CMGbw==
 =upvV
 -----END PGP SIGNATURE-----

Merge tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
     - Per-controller admin and IO timeout sysfs attributes, and
       letting the block layer set request timeouts (Maurizio,
       Maximilian)
     - Multipath passthrough iostats, and PCI P2PDMA enablement for
       multipath devices (Keith, Kiran)
     - A new diag sysfs attribute group exporting per-controller
       counters (retries, multipath failover, error counters, requeue
       and failure counts, reset and reconnect events) (Nilay)
     - FDP configuration validation and bounds check fixes (liuxixin)
     - Various nvmet fixes, including a pre-auth out-of-bounds read in
       the Discovery Get Log Page handler, auth payload bounds
       validation, and tcp error-path leak fixes (Bryam, Tianchu,
       Geliang)
     - nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
       Eric)
     - Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
       Achkinazi, Wentao)

 - MD pull request via Yu Kuai:
     - raid1/raid10 fixes for a deadlock in the read error recovery
       path, error-path detection and bio accounting with cloned bios,
       and an nr_pending leak in the REQ_ATOMIC bad-block error path
       (Abd-Alrhman)
     - PCI P2PDMA propagation from member devices to the RAID device
       (Kiran)
     - dm-raid bio requeue fix, and various smaller fixes and cleanups
       (Benjamin, Chen, Li, Thorsten)

 - Enable Clang lock context analysis for the block layer, with the
   accompanying annotations across queue limits, the blk_holder_ops
   callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)

 - Block status code infrastructure work: a tagged status table, a
   str_to_blk_op() helper, a bio_endio_status() helper, and on top of
   that a new configurable block-layer error injection facility
   (Christoph)

 - DRBD netlink rework, replacing the genl_magic machinery with explicit
   netlink serialization and moving the DRBD UAPI headers to
   include/uapi/linux/ (Christoph Böhmwalder)

 - bvec improvements: a bvec_folio() helper and making the bvec_iter
   helpers proper inline functions (Willy, Christoph)

 - ublk cleanups and a canceling-flag fix for the disk-not-allocated
   case (Caleb, Ming)

 - Partition handling fixes: bound the AIX pp_count scan, fix an of_node
   refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
   Wentao, Mike)

 - Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
   WQ_PERCPU to the block workqueue users (Mateusz, Marco)

 - Block statistics and tracing: propagate in-flight to the whole disk
   on partition IO, export passthrough stats, and a new
   block_rq_tag_wait tracepoint (Tang, Keith, Aaron)

 - A round of removals, unexports and cleanups across bio, direct-io and
   the bvec helpers (Christoph)

 - Various driver fixes (mtip32xx use-after-free, rbd snap_count
   validation and strscpy conversion, nbd socket lockdep reclassify,
   virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
   email/list updates (Coly, Li, Yu, Christoph Böhmwalder)

 - Other little fixes and cleanups all over

* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
  MAINTAINERS: Update Coly Li's email address
  block: check bio split for unaligned bvec
  nbd: Reclassify sockets to avoid lockdep circular dependency
  block: add configurable error injection
  block: add a str_to_blk_op helper
  block: add a "tag" for block status codes
  block: add a macro to initialize the status table
  floppy: Drop unused pnp driver data
  block: propagate in_flight to whole disk on partition I/O
  virtio-blk: clamp zone report to the report buffer capacity
  block: optimize I/O merge hot path with unlikely() hints
  drivers/block/rbd: Use strscpy() to copy strings into arrays
  partitions: aix: bound the pp_count scan to the ppe array
  block: Enable lock context analysis
  block/mq-deadline: Make the lock context annotations compatible with Clang
  block/Kyber: Make the lock context annotations compatible with Clang
  block/blk-mq-debugfs: Improve lock context annotations
  block/blk-iocost: Inline iocg_lock() and iocg_unlock()
  block/blk-iocost: Split ioc_rqos_throttle()
  block/crypto: Annotate the crypto functions
  ...
2026-06-16 13:02:47 +05:30
Jens Axboe
ed60c09f29 nvme updates for Linux 7.2
- Per-controller timeouts
   - Multipath telemetry
   - Namespace format validation
   - Various other fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmohV0IACgkQPe3zGtjz
 Rgmc/A//Qm762VuLMr5oV3jtLyADBlNYS5ERMg+O+cefuQ+ckzHZfCQxGnoL6em+
 r1xsaNUqwj1VFykXc5Szdgr7hMRhtDVxYgkiQSpOu/Ui4ewlIlemK/6tZJFu97YG
 eqCkW5sMw8hyOLBs4JI0FYogx4nwSmCLfw8IiWUC5Cqa/j57elgv4aI7SV3fTDkF
 JsOUWE55tzCafWqhgcYngsNz+kjErV8DbEgY34l66ZrrJChLtcLQm0IT1pktwuXR
 KSAAcIBo6XtLM+DHNY68v/LmJD8MWz7BAZTt25aXt8ehRZVc9bYrKLJfZok95nyr
 CT+/Uz5CsyvNpLCOYKmxJV2t+WoqKkyhKQVJWN31Ms1/mO1+8cTydtRNcPH8ic/L
 Wl0m75fb+/uwAoAXgZE8dParDSft7vA0uguaN514qz872f9L3Bd0xZaD4OhfxBdw
 wWtIs+8mI7EBC1sDIgtLVkR/YEsBY+CQTantvZPI0R22fxmgiXQN9K9EKfy+ZJ58
 xH666mOeTmlDA5RUrEs22iMAx5ILCi5HpKX63iCaFDSrJC3ZcGd5vH34I1Csvx8n
 g4t3jzrHDzqB1dIrKknY7cZPLm5g8ny0uTFC7x26O6SVXZ+6TyfYG9gTyONQMZ1O
 AOLc8FCaT2vPVOXOKSTChD9LLZtGyLZjeQEnU2I2qiJpkxX6s+8=
 =W0b9
 -----END PGP SIGNATURE-----

Merge tag 'nvme-7.2-2026-06-04' of git://git.infradead.org/nvme into for-7.2/block

Pull NVMe updates from Keith:

"- Per-controller timeouts
 - Multipath telemetry
 - Namespace format validation
 - Various other fixes"

* tag 'nvme-7.2-2026-06-04' of git://git.infradead.org/nvme: (34 commits)
  nvme: export controller reconnect event count via sysfs
  nvme: export controller reset event count via sysfs
  nvme: export I/O failure count when no path is available via sysfs
  nvme: export I/O requeue count when no path is usable via sysfs
  nvme: export command error counters via sysfs
  nvme: export multipath failover count via sysfs
  nvme: export command retry count via sysfs
  nvme: add diag attribute group under sysfs
  nvme-tcp: lockdep: use dynamic lockdep keys per socket instance
  nvme-tcp: move nvme_tcp_reclassify_socket()
  nvme: validate FDP configuration descriptor sizes
  nvmet-auth: validate reply message payload bounds against transfer length
  nvme: refresh multipath head zoned limits from path limits
  nvme: fix FDP fdpcidx bounds check
  nvme-tcp: Use WQ_PERCPU explicitly if wq_unbound is false.
  nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page
  nvme-multipath: set BIO_REMAPPED on bios remapped to per-path namespace disks
  nvme-multipath: require exact iopolicy names for module parameter
  nvme-multipath: pass NS head to nvme_mpath_revalidate_paths()
  nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools
  ...
2026-06-05 05:18:58 -06:00
Nilay Shroff
37afebc79a nvme: add diag attribute group under sysfs
Add a new diag attribute group under:
/sys/class/nvme/<ctrl>/
/sys/block/<nvme-path-dev>/
/sys/block/<ns-head-dev>/

This new sysfs attribute group will be used to organize NVMe diagnostic
and telemetry-related counters under it.

Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-06-04 01:57:06 -07:00
Mateusz Nowicki
a192b8cfa4 nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools
nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the
numa_node forwarded from hctx->numa_node by its single caller,
nvme_init_hctx_common().  On a non-NUMA kernel hctx->numa_node is
NUMA_NO_NODE (-1).  Because the parameter was declared 'unsigned', the
value becomes UINT_MAX and the index walks off the array (sized to
nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace
without a /dev node.

Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel:

  BUG: unable to handle page fault for address: ffff889101603d38
  RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme]
  Call Trace:
   nvme_init_hctx+0x10/0x20 [nvme]
   nvme_alloc_ns+0x9e/0xa10 [nvme_core]
   nvme_scan_ns+0x301/0x3b0 [nvme_core]
   nvme_scan_ns_async+0x23/0x30 [nvme_core]

Switch the parameter to int and fall back to node 0 when it is
NUMA_NO_NODE; node 0 is always present.

Fixes: d977506f88 ("nvme-pci: make PRP list DMA pools per-NUMA-node")
Link: https://lore.kernel.org/r/20260309062840.2937858-2-iam@sung-woo.kim
Reported-by: Sung-woo Kim <iam@sung-woo.kim>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mateusz Nowicki <mateusz.nowicki@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-27 09:28:20 -07:00
Mateusz Nowicki
b040a1a452 block: switch numa_node to int in blk_mq_hw_ctx and init_request
numa_node in blk_mq_hw_ctx and the matching argument of
blk_mq_ops::init_request can be NUMA_NO_NODE (-1).  Declared as
unsigned int, NUMA_NO_NODE becomes UINT_MAX and walks off
nvme_dev::descriptor_pools[] on CONFIG_NUMA=n [1].

Switch the field and the callback prototype to int and update all
in-tree init_request implementations.  No functional change:
cpu_to_node(), kmalloc_node() and blk_alloc_flush_queue() already
take int.

Link: https://lore.kernel.org/linux-nvme/20260522150628.399288-1-mateusz.nowicki@posteo.net/ [1]
Link: https://lore.kernel.org/linux-nvme/20260309062840.2937858-2-iam@sung-woo.kim/
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Sung-woo Kim <iam@sung-woo.kim>
Signed-off-by: Mateusz Nowicki <mateusz.nowicki@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260523125210.272274-1-mateusz.nowicki@posteo.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-05-26 11:01:55 -06:00
Manivannan Sadhasivam
748a927e08 nvme-pci: Use pci_suspend_retains_context() during suspend
pci_suspend_retains_context() lets PCI client drivers know if the platform
can retain the device context during suspend. This is decided based on
several factors like:

  - Firmware involvement at the end of suspend

  - Any platform limitation in waking from low power state (e.g., L1SS)

This API may be extended in the future to cover other platform specific
issues impacting the device low power mode during system suspend.

Use this API instead of checks like pm_suspend_via_firmware(). When
pci_suspend_retains_context() returns false, assume the platform cannot
retain the context and shutdown the controller. If it returns true, assume
that the context will be retained and keep the device in low power mode.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-4-b2c3a4bdeb15@oss.qualcomm.com
2026-05-23 06:54:25 -05:00
Keith Busch
1bf86336e4 nvme-pci: fix dma mapping leak on data setup error
We're leaking the initial DMA mapping during iteration if we fail to
allocate the tracking descriptor for both PRP and SGL. Unmap the
iterator directly; we can't use the existing unmap helper because it
depends on the tracking descriptor being successfully allocated, so a
new one for an in-use iterator is provided.

The mappings were also leaking when the driver detects an invalid
bio_vec when mapping PRPs, so fix that too.

Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Fixes: 7ce3c1dd78 ("nvme-pci: convert the data mapping to blk_rq_dma_map")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-21 07:49:05 -07:00
Keith Busch
85686c7296 nvme-pci: fix dma_vecs leak on p2p memory
We don't unmap P2P memory, so we don't need to track it. The dma_vec
allocation was getting leaked on the completion.

Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-21 07:48:58 -07:00
Maurizio Lombardi
61b99f24f0 nvme: add sysfs attribute to change admin timeout per nvme controller
Currently, there is no method to adjust the timeout values on a
per-controller basis with nvme admin queues.
Add an admin_timeout attribute to nvme so that different nvme controllers
which may have different timeout requirements can have custom admin
timeouts set.

The admin timeout is also applied to the fabrics queue (fabrics_q).
The fabrics queue is utilized for fabric-specific administrative and
control operations, such as Connect and Property Get/Set commands.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-20 11:45:44 -07:00
Maurizio Lombardi
23b6d2cbf7 nvme: remove redundant timeout argument from nvme_wait_freeze_timeout
All callers of nvme_wait_freeze_timeout() currently pass the exact same
NVME_IO_TIMEOUT default as their timeout argument.

Remove it and use a local variable.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-20 11:45:44 -07:00
AlanCui4080
40df217285 Revert "nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808"
This reverts commit 7f991e3f9b ("nvme: add quirk
NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808")

The incorrect implementations of SUBNQN is a known issue in a massive number of
NVMe units.  However, the warning "nvme nvmex: missing or invalid SUBNQN field."
is usually appropriate and will not affect performance or behavior etc.  That is
because the support for SUBNQN is mandatory if the controller supports NVMe
revision 1.2.1 or greater, and it reported itself without a SUBNQN field which
breaks compliance with the specification. It should be not quirked by the Linux
Kernel.

Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-11 08:07:40 -07:00
Chia-Lin Kao (AceLan)
b35a130367 nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward.  This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.

This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:

  nvme_setup_host_mem()
    nvme_alloc_host_mem_single()   -> sets dev->hmb_sgt
    nvme_set_host_mem()            -> fails with -EIO
    nvme_free_host_mem()           -> frees hmb_sgt, but does NOT NULL it
    return error

  nvme_probe() error path:
    nvme_free_host_mem()           -> dev->hmb_sgt is stale, use-after-free

The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).

This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
 Call Trace:
  <TASK>
  dma_free_noncontiguous+0x3b/0x130
  nvme_free_host_mem+0x30/0xf0 [nvme]
  nvme_probe.cold+0xcc/0x275 [nvme]
  local_pci_probe+0x43/0xa0
  pci_device_probe+0xeea/0x290
  really_probe+0xf9/0x3b0
  __driver_probe_device+0x8b/0x170
  driver_probe_device+0x24/0xd0
  __driver_attach_async_helper+0x6b/0x110
  async_run_entry_fn+0x37/0x170
  process_one_work+0x1ac/0x3d0
  worker_thread+0x1b8/0x360
  kthread+0xf7/0x130
  ret_from_fork+0x2d8/0x3a0
  ret_from_fork_asm+0x1a/0x30
  </TASK>

Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state.

Fixes: 63a5c7a4b4 ("nvme-pci: use dma_alloc_noncontigous if possible")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-05-11 08:07:40 -07:00
Jens Axboe
aa03cfe9db nvme fixes for Linux 7.1
- Target data transfer size confiruation (Aurelien)
  - Enable P2P for RDMA (Shivaji Kant)
  - TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
  - TCP host updates (Alistair, Chaitanya)
  - Authentication updates (Alistair, Daniel, Chris Leech)
  - Multipath fixes (John Garry)
  - New quirks (Alan Cui, Tao Jiang)
  - Apple driver fix (Fedor Pchelkin)
  - PCI admin doorbell update fix (Keith)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmnriqwACgkQPe3zGtjz
 Rgm3zw//S0WS/UyfPBr8L7zUL4sukcGINH5WIOZpKz4BUADxtIGY9i4gIyTKJzhA
 OM8IAOSIqflXbpwsZXQY0saG0S50H82OpH9tF2iAaZd1ja6dOJR05L3GpZ2n0Buc
 GFlPkzFA6OxaRBml9GKnSi+05t7/HmgSdWHUNQ1MyTuBy6YDVjWB7Xnv88hK2L/O
 2M/aD+vU+4UM+ITvPmin3JPS1qS0MyIQewG3Fo5clVwfHQ3Fox1KGCSRKEeiWwr8
 pfv90QgGaIBlbnTO19Ng6cFPAL8XLlIY3veLMP+9SsDzJMZRo9zmvO3qXe3C3iS9
 61oMl7gsoPmzQtsy9GUo2D2F8Lnf0ss/5QcJDpkD+wzxmx9QEDqMnmfia6l0FCzW
 dFPtKzYPgM01EFJa/Ulj1Yk52i2lLUVdLnb5ghz75HEu3gUyFbV1WrxPJuWhzek4
 TeI0tGbC7ogfwVT/0aWTsYpUsYJ0tbLK5RK6aSy9TcYXhi/Px0rOxE3vULgZX3C1
 ZaWi0z6mPiyIvUrh9+lt6GsHjow7uunvxNPAdUtyHjM/YQZh47b9tWLslIj2yNVE
 1nkiYRunPxuB/CclLHDfjAxTHWYxCte2BGplKAjYcjLcqTN4mDskMnaeleX4Rj5X
 xOqqmwOoAPxL4kid2WjVtMe5YIybcOAB6f5oJLvJt3rEILFCsFc=
 =iwmA
 -----END PGP SIGNATURE-----

Merge tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme into block-7.1

Pull NVMe fixes from Keith:

"- Target data transfer size confiruation (Aurelien)
 - Enable P2P for RDMA (Shivaji Kant)
 - TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
 - TCP host updates (Alistair, Chaitanya)
 - Authentication updates (Alistair, Daniel, Chris Leech)
 - Multipath fixes (John Garry)
 - New quirks (Alan Cui, Tao Jiang)
 - Apple driver fix (Fedor Pchelkin)
 - PCI admin doorbell update fix (Keith)"

* tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme: (22 commits)
  nvme-auth: Hash DH shared secret to create session key
  nvme-pci: fix missed admin queue sq doorbell write
  nvme-auth: Include SC_C in RVAL controller hash
  nvme-tcp: teardown circular locking fixes
  nvmet-tcp: Don't clear tls_key when freeing sq
  Revert "nvmet-tcp: Don't free SQ on authentication success"
  nvme: skip trace completion for host path errors
  nvme-pci: add quirk for Memblaze Pblaze5 (0x1c5f:0x0555)
  nvme-multipath: put module reference when delayed removal work is canceled
  nvme: expose TLS mode
  nvme-apple: drop invalid put of admin queue reference count
  nvme-core: fix parameter name in comment
  nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free
  nvme-multipath: drop head pointer check in nvme_mpath_clear_current_path()
  nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808 (Samsung PM981/983/970 EVO Plus )
  nvmet-tcp: fix race between ICReq handling and queue teardown
  nvmet-tcp: remove redundant calls to nvmet_tcp_fatal_error()
  nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers
  nvme: enable PCI P2PDMA support for RDMA transport
  nvmet: introduce new mdts configuration entry
  ...
2026-04-27 15:47:21 -06:00
Keith Busch
1cc4cdae2a nvme-pci: fix missed admin queue sq doorbell write
We can batch admin commands submitted through io_uring_cmd passthrough,
which means bd->last may be false and skips the doorbell write to
aggregate multiple commands per write. If a subsequent command can't be
dispatched for whatever reason, we have to provide the blk-mq ops'
commit_rqs callback in order to ensure we properly update the doorbell.

Fixes: 58e5bdeb9c ("nvme: enable uring-passthrough for admin commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-04-22 10:07:30 -07:00
Tao Jiang
cf92d78a4a nvme-pci: add quirk for Memblaze Pblaze5 (0x1c5f:0x0555)
The Memblaze Pblaze5 NVMe device (PCI ID 0x1c5f:0x0555)
is detected as a controller on recent kernels (tested on 5.15.85
and 6.8.4), but no namespace is exposed.

Tools like lsblk and fdisk do not report any block device.

dmesg shows:
  nvme nvme0: missing or invalid SUBNQN field.

The device works correctly on older kernels (e.g. 4.19), suggesting
a compatibility issue with newer namespace handling.

This indicates the device does not properly support the
Namespace Descriptor List feature.

Applying NVME_QUIRK_NO_NS_DESC_LIST allows the namespace to be
discovered correctly.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Tao Jiang <tanroame.kyle@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-04-16 15:11:14 -07:00
Linus Torvalds
7fe6ac157b for-7.1/block-20260411
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmna0tgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgptEbD/0ZMEsz5pcN+/bpM9Qva5lVVkByRieua+JA
 T7L+JMcEigp1Hf2idAPlv1e9dbrtgOGhkjZNlbZenP2MHXBmbUTnzTWDKW5w0ZQ4
 UqnVC7fMmxzI57DPt7iG/1WQo8O6QPHWwBof5ZXn0b83qwByTB2oVkAb9ysT7CdM
 wGk5KnPRLIAWf5o+aZ4LoWE+196jQiszx1m6U58FTqnCgvJ/GyKyrgzx+uvGUgF+
 owZT/6TrN7cN9A68fOnmcjEZ7beZXygOQPTn32sF9rEOi8JsgK71EE2LofdVVSNU
 ES/tyKVJbSNDgUH2b0T84rErT4MtZcw5J29V3k7CVndC+DcT2uLSroPz3lYQjDg9
 TLeq7ZLjnyoBG+muboWdXcvBKn3aKLec3nfVSbz6J1xb/Z22gWYy5TZbrGnGH8fJ
 zBiyKkHMaZi55IdTDWQT3a48h36qFh0Y2wbvZ6uhyYOfXHyj4pA4ccJZgFfmf4ZG
 flVRFGEL9Tqc82lB8dfy9DBp0ZQSjeBUCd+gyDKjiuWVau5L5iTUeMMkt8yr7qbg
 PY+ATJcHk5S5zwM2xcZUt5EcHBBbCaKQ6DdRZKwzMMUvCjHlvnWvENVjUtRa9Dng
 1vUKpB/e5NGpqD05Iqgyai+OD9/tALc4sUEI2yQ7/dk9pKIXQ4RE9HR/pSkgbjeR
 LGokj08cgg==
 =ga3t
 -----END PGP SIGNATURE-----

Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

 - Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
   copies between kernel and userspace by matching registered buffer
   PFNs at I/O time. Includes selftests.

 - Refactor bio integrity to support filesystem initiated integrity
   operations and arbitrary buffer alignment.

 - Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
   and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
   unify synchronous bi_end_io callbacks.

 - Fix zone write plug refcount handling and plug removal races. Add
   support for serializing zone writes at QD=1 for rotational zoned
   devices, yielding significant throughput improvements.

 - Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
   command.

 - Add io_uring passthrough (uring_cmd) support to the BSG layer.

 - Replace pp_buf in partition scanning with struct seq_buf.

 - zloop improvements and cleanups.

 - drbd genl cleanup, switching to pre_doit/post_doit.

 - NVMe pull request via Keith:
      - Fabrics authentication updates
      - Enhanced block queue limits support
      - Workqueue usage updates
      - A new write zeroes device quirk
      - Tagset cleanup fix for loop device

 - MD pull requests via Yu Kuai:
      - Fix raid5 soft lockup in retry_aligned_read()
      - Fix raid10 deadlock with check operation and nowait requests
      - Fix raid1 overlapping writes on writemostly disks
      - Fix sysfs deadlock on array_state=clear
      - Proactive RAID-5 parity building with llbitmap, with
        write_zeroes_unmap optimization for initial sync
      - Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
        version mismatch fallback
      - Fix bcache use-after-free and uninitialized closure
      - Validate raid5 journal metadata payload size
      - Various cleanups

 - Various other fixes, improvements, and cleanups

* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
  ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
  scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
  block: refactor blkdev_zone_mgmt_ioctl
  MAINTAINERS: update ublk driver maintainer email
  Documentation: ublk: address review comments for SHMEM_ZC docs
  ublk: allow buffer registration before device is started
  ublk: replace xarray with IDA for shmem buffer index allocation
  ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
  ublk: verify all pages in multi-page bvec fall within registered range
  ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
  xfs: use bio_await in xfs_zone_gc_reset_sync
  block: add a bio_submit_or_kill helper
  block: factor out a bio_await helper
  block: unify the synchronous bi_end_io callbacks
  xfs: fix number of GC bvecs
  selftests/ublk: add read-only buffer registration test
  selftests/ublk: add filesystem fio verify test for shmem_zc
  selftests/ublk: add hugetlbfs shmem_zc test for loop target
  selftests/ublk: add shared memory zero-copy test
  selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
  ...
2026-04-13 15:51:31 -07:00
Alan Cui
7f991e3f9b nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808 (Samsung PM981/983/970 EVO Plus )
The firmware for Samsung 970 Evo Plus / PM981 / PM983 does not support SUBNQN.
Make quirks to suppress warnings.

# nvme id-ctrl /dev/nvme1n1
NVME Identify Controller:
vid       : 0x144d
ssvid     : 0x144d
sn        : ***
mn        : Samsung SSD 970 EVO Plus 500GB
fr        : 2B2QEXM7

mcdqpc    : 0
subnqn    :
ioccsz    : 0

Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-04-09 07:19:43 -07:00
Robert Beckett
a8eebf9699 nvme-pci: add NVME_QUIRK_DISABLE_WRITE_ZEROES for Kingston OM3SGP4
The Kingston OM3SGP42048K2-A00 (PCI ID 2646:502f) firmware has a race
condition when processing concurrent write zeroes and DSM (discard)
commands, causing spurious "LBA Out of Range" errors and IOMMU page
faults at address 0x0.

The issue is reliably triggered by running two concurrent mkfs commands
on different partitions of the same drive, which generates interleaved
write zeroes and discard operations.

Disable write zeroes for this device, matching the pattern used for
other Kingston OM* drives that have similar firmware issues.

Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-03-27 07:35:05 -07:00
Linus Torvalds
73548503dc block-7.0-20260312
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmzLnIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpo6eD/4ywXTNYMZD4gkFgjIm01+ygfuFqEVS0uK8
 +uWbtO1NuJh9ML41vq5MfSEy7mg00tvWaVyyTdBkdxvyexoXxeOQOYTxKMKrdDYf
 4CSpR9J+nIM6ZuUmVycD0ZUUbfcms+ODMq5rCt11T3EpTCIiBrfzdOxPU3Bw3sCf
 waWAqcbRNj1WM3+g9AXvDoNzJWr18c08QNN2hjISZ56DiPUKjegkCEPKs1V/qoDi
 ToeqWYNZBhacz4ma5pGTfWoUY9SsNteE6ND2Q/edYJf6NmRwD6cbhADBdURpS62h
 e7j+ccNG4fySVkdC6eqC6hcPskX28MhEx+GGuOqOYiuugufUvD/eX2V+lc/Hq09o
 JPCg7oJIMzYRTydbVyTLkk5oQeqOm89ht+KkZR0N1J3tdI6btsRQ+OZ8pq1k+cNi
 y6oAtr4n1z6NCBMXlVf8S4m05EGLgQpvuQ274dA39MPZf9qApBt4py0cM76JkMly
 4P37zKrBbEoW89uzTGCvIJwKWZE1DPC27OKAlWLykbxBDW4iyp+oc6dHuerO+dBa
 UiyLKVUNZar32FxyJxNqxpstX4jHONdpzd8lSgk6gxIgopbfezRXwYDznQF4sP67
 5htBvVVftblGU3gIoK/CTBmdnmI9FKl6JeMP+UYK8pZ/OY2ZJbRFdTQKrFEa4OeA
 OQtHQM7KUA==
 =OgM8
 -----END PGP SIGNATURE-----

Merge tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Fix nvme-pci IRQ race and slab-out-of-bounds access
      - Fix recursive workqueue locking for target async events
      - Various cleanups

 - Fix a potential NULL pointer dereference in ublk on size setting

 - ublk automatic partition scanning fix

 - Two s390 dasd fixes

* tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  nvme: Annotate struct nvme_dhchap_key with __counted_by
  nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue()
  nvme-pci: Fix race bug in nvme_poll_irqdisable()
  nvmet: move async event work off nvmet-wq
  nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
  s390/dasd: Copy detected format information to secondary device
  s390/dasd: Move quiesce state with pprc swap
  ublk: don't clear GD_SUPPRESS_PART_SCAN for unprivileged daemons
  ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
2026-03-13 10:13:06 -07:00
Sungwoo Kim
fc71f409b2 nvme-pci: Fix race bug in nvme_poll_irqdisable()
In the following scenario, pdev can be disabled between (1) and (3) by
(2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will
return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2).
This causes IRQ warning because it tries to enable INTx IRQ that has
never been disabled before.

To fix this, save IRQ number into a local variable and ensure
disable_irq() and enable_irq() operate on the same IRQ number.  Even if
pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and
enable_irq() on a stale IRQ number is still valid and safe, and the
depth accounting reamins balanced.

task 1:
nvme_poll_irqdisable()
  disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1)
  enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector))  ...(3)

task 2:
nvme_reset_work()
  nvme_dev_disable()
    pdev->msix_enable = 0;  ...(2)

crash log:

------------[ cut here ]------------
Unbalanced enable for IRQ 10
WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26
Modules linked in:
CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753
Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9
RSP: 0018:ffffc900001bf550 EFLAGS: 00010046
RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0
RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000
R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293
FS:  0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0
Call Trace:
 <TASK>
 enable_irq+0x121/0x1e0 kernel/irq/manage.c:797
 nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494
 nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744
 blk_mq_rq_timed_out block/blk-mq.c:1653 [inline]
 blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721
 bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292
 __sbitmap_for_each_set include/linux/sbitmap.h:269 [inline]
 sbitmap_for_each_set include/linux/sbitmap.h:290 [inline]
 bt_for_each block/blk-mq-tag.c:324 [inline]
 blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536
 blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763
 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
 process_scheduled_works kernel/workqueue.c:3340 [inline]
 worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
 kthread+0x41a/0x930 kernel/kthread.c:463
 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
 </TASK>
irq event stamp: 74478
hardirqs last  enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline]
hardirqs last  enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202
hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162
softirqs last  enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last  enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last  enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120 kernel/softirq.c:723
softirqs last disabled at (74287): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last disabled at (74287): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last disabled at (74287): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120 kernel/softirq.c:723
---[ end trace 0000000000000000 ]---

Fixes: fa059b856a (nvme-pci: Simplify nvme_poll_irqdisable)
Acked-by: Chao Shi <cshi008@fiu.edu>
Acked-by: Weidong Zhu <weizhu@fiu.edu>
Acked-by: Dave Tian <daveti@purdue.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-03-10 08:20:29 -07:00
Sungwoo Kim
b4e78f1427 nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
dev->online_queues is a count incremented in nvme_init_queue. Thus,
valid indices are 0 through dev->online_queues − 1.

This patch fixes the loop condition to ensure the index stays within the
valid range. Index 0 is excluded because it is the admin queue.

KASAN splat:

==================================================================
BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline]
BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404
Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74

CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: nvme-reset-wq nvme_reset_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:378 [inline]
 print_report+0xce/0x5d0 mm/kasan/report.c:482
 kasan_report+0xdc/0x110 mm/kasan/report.c:595
 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379
 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline]
 nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404
 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252
 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
 process_scheduled_works kernel/workqueue.c:3340 [inline]
 worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
 kthread+0x41a/0x930 kernel/kthread.c:463
 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
 </TASK>

Allocated by task 34 on cpu 1 at 4.241550s:
 kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57
 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78
 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570
 poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
 __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415
 kasan_kmalloc include/linux/kasan.h:263 [inline]
 __do_kmalloc_node mm/slub.c:5657 [inline]
 __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663
 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline]
 nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline]
 nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534
 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324
 pci_call_probe drivers/pci/pci-driver.c:392 [inline]
 __pci_device_probe drivers/pci/pci-driver.c:417 [inline]
 pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451
 call_driver_probe drivers/base/dd.c:583 [inline]
 really_probe+0x29b/0xb70 drivers/base/dd.c:661
 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803
 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833
 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159
 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129
 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
 process_scheduled_works kernel/workqueue.c:3340 [inline]
 worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
 kthread+0x41a/0x930 kernel/kthread.c:463
 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246

The buggy address belongs to the object at ffff88800592a000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 244 bytes to the right of
 allocated 1152-byte region [ffff88800592a000, ffff88800592a480)

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001
head: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 000fffffc0000003 ffffea0000164a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88800592a400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88800592a480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800592a500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                                             ^
 ffff88800592a580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800592a600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Fixes: 0f0d2c876c (nvme: free sq/cq dbbuf pointers when dbbuf set fails)
Acked-by: Chao Shi <cshi008@fiu.edu>
Acked-by: Weidong Zhu <weizhu@fiu.edu>
Acked-by: Dave Tian <daveti@purdue.edu>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-03-10 08:19:53 -07:00
Linus Torvalds
a028739a43 block-7.0-20260305
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmqPRMQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplf5D/9uOsBr+OGXtkLUJtD6MiwoJUsYgYF2dMIx
 epcp+8RdMaOGtigtx69QXzTP5aPjA+AvBLAMYM+QDQDAPMWbRPsD7LaCYHy7ekwA
 OL68R3QRTMYPPgpuf7pKyhif7olozAvoWAnRaoWlo67rbK+mTzZsTIsgTwF4zUu6
 T0dL9thbWqtJMxKSuUk+DywggvGyNZWICJ3rAZ6os2htruH0fPhsJNGVFgNXMnpe
 Cy2OvWxBWRQkZnpDEocZUdYyCRVhHr7hu311j6nSLNXufqpgFmWLGO4C3vetOlgx
 ulEHfGNINcSLcw9R8pNWRxU14V6iw8Oy4nU9RtZhUpF32Iasvxb4H0w76Dp9Ukq1
 /DuoSkWg/Ahn24xSYxJwwZpOEE8L92pn0M2ukCfC6h7ytmDjjEL1AQ2kyFHV4mR3
 nc/3FkQ0abe3HHk8Rit6+txe3sSQo5no1z8kFlb9yp2MwAmonxCCQ9N1s7pxeeP+
 iLaPbGMaZ7Ra1GswD/vzxFQtkglsxLuM5D0JkjHe99a54ZnF0vF3y9jeDVOQbV1C
 H6/bU/2DI3SQ8xqv6tIXQ22reyRen3ao5VKLSrmrT/tDQVoEBV5SMnJFO1J8jBP4
 QST03wiu8ShHSyZ98KefwlsndrTX02V9UVD4FVj+TZXwCWltulnIR4dVYFdySWwW
 d613iUsWJw==
 =NNcQ
 -----END PGP SIGNATURE-----

Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Improve quirk visibility and configurability (Maurizio)
      - Fix runtime user modification to queue setup (Keith)
      - Fix multipath leak on try_module_get failure (Keith)
      - Ignore ambiguous spec definitions for better atomics support
        (John)
      - Fix admin queue leak on controller reset (Ming)
      - Fix large allocation in persistent reservation read keys
        (Sungwoo Kim)
      - Fix fcloop callback handling (Justin)
      - Securely free DHCHAP secrets (Daniel)
      - Various cleanups and typo fixes (John, Wilfred)

 - Avoid a circular lock dependency issue in the sysfs nr_requests or
   scheduler store handling

 - Fix a circular lock dependency with the pcpu mutex and the queue
   freeze lock

 - Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
   bio_add_page(), as adding a page here cannot fail. The exiting code
   had broken cleanup for the error condition, so make it clear that the
   error condition cannot happen

 - Fix for a __this_cpu_read() in preemptible context splat

* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  block: use trylock to avoid lockdep circular dependency in sysfs
  nvme: fix memory allocation in nvme_pr_read_keys()
  block: use __bio_add_page in bio_copy_kern
  block: break pcpu_alloc_mutex dependency on freeze_lock
  blktrace: fix __this_cpu_read/write in preemptible context
  nvme-multipath: fix leak on try_module_get failure
  nvmet-fcloop: Check remoteport port_state before calling done callback
  nvme-pci: do not try to add queue maps at runtime
  nvme-pci: cap queue creation to used queues
  nvme-pci: ensure we're polling a polled queue
  nvme: fix memory leak in quirks_param_set()
  nvme: correct comment about nvme_ns_remove()
  nvme: stop setting namespace gendisk device driver data
  nvme: add support for dynamic quirk configuration via module parameter
  nvme: fix admin queue leak on controller reset
  nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
  nvme: stop using AWUPF
  nvme: expose active quirks in sysfs
  nvme/host: fixup some typos
2026-03-06 08:36:18 -08:00
Jens Axboe
d90c470b0e nvme fixes for Linux 7.0
- Improve quirk visibility and configurability (Maurizio)
  - Fix runtime user modification to queue setup (Keith)
  - Fix multipath leak on try_module_get failure (Keith)
  - Ignore ambiguous spec definitions for better atomics support (John)
  - Fix admin queue leak on controller reset (Ming)
  - Fix large allocation in persistent reservation read keys (Sungwoo Kim)
  - Fix fcloop callback handling (Justin)
  - Securely free DHCHAP secrets (Daniel)
  - Various cleanups and typo fixes (John, Wilfred)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmmoSbMACgkQPe3zGtjz
 RgkpuQ/9EfCp24xowwKEXycX7pquojwjEAh1n5WsUyBDXQls/7Dq3w0EXtkc8fA8
 SUcDpTj7ABiF/faschCoFO47R5/0TPtNMCleWFSdW0OG6B7IYaUt9Cj86JK1dzme
 Zn7luH47Pesmd+H184IOIfDhsiVs5Z3YCISlT1aa1EFg+3/neDqGGpT4+ySOjSZe
 9j8ASUTOqfuBZ2Xc8RNvumABBEkEkUd4xwYTLRi+o/PR9econGrpiEqDyUBAf8dr
 VrZoL0aoQoUEaU08tJOci4GH3Spp4RXlpQo92RBE4yDTxWozRRBWwoCycmPKHQ5b
 +5nC77t1p2OyzgP0xPngQZVMi7A+QTFZf4shq0Xho5kifjB8ZTqVSJJSGK7RlwE4
 GmXgHfMs8Gvn3aew8BcpXilhe4InXfY1LqYmTvJxo9VLK/u7apo94vrJICewHh2z
 lsiWTOHe9xSm8wR20fcxp3D3kXpQ5sMcMoco96dVFetw1WNE30qDy+xtpOvPwdL5
 9mloguR7Pmsu+gVim2VaqSA8HsPIYEbXymLMVzTeVbtPALzrKsGLLW8k/DYFhSTm
 +Ow4KeItyL5hgDU2jenjS3xwshKqKTeJDueue4WBFxgqdbH9hwiJ6aVWS2eoJxev
 RAZXSGTmxEo8X5nDsNz048iT96lFpM7ERViHOWnrptLcFX4yFNM=
 =fMd5
 -----END PGP SIGNATURE-----

Merge tag 'nvme-7.0-2026-03-04' of git://git.infradead.org/nvme into block-7.0

Pull NVMe fixes from Keith:

"- Improve quirk visibility and configurability (Maurizio)
 - Fix runtime user modification to queue setup (Keith)
 - Fix multipath leak on try_module_get failure (Keith)
 - Ignore ambiguous spec definitions for better atomics support (John)
 - Fix admin queue leak on controller reset (Ming)
 - Fix large allocation in persistent reservation read keys (Sungwoo Kim)
 - Fix fcloop callback handling (Justin)
 - Securely free DHCHAP secrets (Daniel)
 - Various cleanups and typo fixes (John, Wilfred)"

* tag 'nvme-7.0-2026-03-04' of git://git.infradead.org/nvme:
  nvme: fix memory allocation in nvme_pr_read_keys()
  nvme-multipath: fix leak on try_module_get failure
  nvmet-fcloop: Check remoteport port_state before calling done callback
  nvme-pci: do not try to add queue maps at runtime
  nvme-pci: cap queue creation to used queues
  nvme-pci: ensure we're polling a polled queue
  nvme: fix memory leak in quirks_param_set()
  nvme: correct comment about nvme_ns_remove()
  nvme: stop setting namespace gendisk device driver data
  nvme: add support for dynamic quirk configuration via module parameter
  nvme: fix admin queue leak on controller reset
  nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
  nvme: stop using AWUPF
  nvme: expose active quirks in sysfs
  nvme/host: fixup some typos
2026-03-04 08:15:17 -07:00
Linus Torvalds
bf4afc53b7 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 17:09:51 -08:00
Kees Cook
69050f8d6d treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-21 01:02:28 -08:00
Keith Busch
baa47c4f89 nvme-pci: do not try to add queue maps at runtime
The block layer allocates the set's maps once. We can't add special
purpose queues at runtime if they weren't allocated at initialization
time.

Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-02-13 06:47:59 -08:00
Keith Busch
4735b510a0 nvme-pci: cap queue creation to used queues
If the user reduces the special queue count at runtime and resets the
controller, we need to reduce the number of queues and interrupts
requested accordingly rather than start with the pre-allocated queue
count.

Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-02-13 06:47:41 -08:00
Keith Busch
166e31d7db nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-02-13 06:47:24 -08:00
Maurizio Lombardi
bbdaa8c17c nvme: fix memory leak in quirks_param_set()
When loading the nvme module, if the 'quirks' parameter is specified
via both the kernel command line (e.g., nvme.quirks=...) and the
modprobe command line (e.g., modprobe nvme quirks=...), the
quirks_param_set() callback is invoked twice.

Currently, in the double-invocation scenario, the second call
overwrites the nvme_pci_quirk_list pointer, causing the memory
allocated in the first call to leak.

Fix this by freeing the existing list before assigning the new one.

Fixes: b4247c8317c5 ("nvme: add support for dynamic quirk configuration via module parameter")
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-02-11 18:34:39 -08:00
Linus Torvalds
0c00ed308d for-7.0/block-20260206
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmGLwcQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpv+TD/48S2HTnMhmW6AtFYWErQ+sEKXpHrxbYe7S
 +qR8/g/T+QSfhfqPwZEuagndFKtIP3LJfaXGSP1Lk1RfP9NLQy91v33Ibe4DjHkp
 etWSfnMHA9MUAoWKmg8EvncB2G+ZQFiYCpjazj5tKHD9S2+psGMuL8kq6qzMJE83
 uhpb8WutUl4aSIXbMSfyGlwBhI1MjjRbbWlIBmg4yC8BWt1sH8Qn2L2GNVylEIcX
 U8At3KLgPGn0axSg4yGMAwTqtGhL/jwdDyeczbmRlXuAr4iVL9UX/yADCYkazt6U
 ttQ2/H+cxCwfES84COx9EteAatlbZxo6wjGvZ3xOMiMJVTjYe1x6Gkcckq+LrZX6
 tjofi2KK78qkrMXk1mZMkZjpyUWgRtCswhDllbQyqFs0SwzQtno2//Rk8HU9dhbt
 pkpryDbGFki9X3upcNyEYp5TYflpW6YhAzShYgmE6KXim2fV8SeFLviy0erKOAl+
 fwjTE6KQ5QoQv0s3WxkWa4lREm34O6IHrCUmbiPm5CruJnQDhqAN2QZIDgYC4WAf
 0gu9cR/O4Vxu7TQXrumPs5q+gCyDU0u0B8C3mG2s+rIo+PI5cVZKs2OIZ8HiPo0F
 x73kR/pX3DMe35ZQkQX22ymMuowV+aQouDLY9DTwakP5acdcg7h7GZKABk6VLB06
 gUIsnxURiQ==
 =jNzW
 -----END PGP SIGNATURE-----

Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

 - Support for batch request processing for ublk, improving the
   efficiency of the kernel/ublk server communication. This can yield
   nice 7-12% performance improvements

 - Support for integrity data for ublk

 - Various other ublk improvements and additions, including a ton of
   selftests additions and updated

 - Move the handling of blk-crypto software fallback from below the
   block layer to above it. This reduces the complexity of dealing with
   bio splitting

 - Series fixing a number of potential deadlocks in blk-mq related to
   the queue usage counter and writeback throttling and rq-qos debugfs
   handling

 - Add an async_depth queue attribute, to resolve a performance
   regression that's been around for a qhilw related to the scheduler
   depth handling

 - Only use task_work for IOPOLL completions on NVMe, if it is necessary
   to do so. An earlier fix for an issue resulted in all these
   completions being punted to task_work, to guarantee that completions
   were only run for a given io_uring ring when it was local to that
   ring. With the new changes, we can detect if it's necessary to use
   task_work or not, and avoid it if possible.

 - rnbd fixes:
      - Fix refcount underflow in device unmap path
      - Handle PREFLUSH and NOUNMAP flags properly in protocol
      - Fix server-side bi_size for special IOs
      - Zero response buffer before use
      - Fix trace format for flags
      - Add .release to rnbd_dev_ktype

 - MD pull requests via Yu Kuai
      - Fix raid5_run() to return error when log_init() fails
      - Fix IO hang with degraded array with llbitmap
      - Fix percpu_ref not resurrected on suspend timeout in llbitmap
      - Fix GPF in write_page caused by resize race
      - Fix NULL pointer dereference in process_metadata_update
      - Fix hang when stopping arrays with metadata through dm-raid
      - Fix any_working flag handling in raid10_sync_request
      - Refactor sync/recovery code path, improve error handling for
        badblocks, and remove unused recovery_disabled field
      - Consolidate mddev boolean fields into mddev_flags
      - Use mempool to allocate stripe_request_ctx and make sure
        max_sectors is not less than io_opt in raid5
      - Fix return value of mddev_trylock
      - Fix memory leak in raid1_run()
      - Add Li Nan as mdraid reviewer

 - Move phys_vec definitions to the kernel types, mostly in preparation
   for some VFIO and RDMA changes

 - Improve the speed for secure erase for some devices

 - Various little rust updates

 - Various other minor fixes, improvements, and cleanups

* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
  blk-mq: ABI/sysfs-block: fix docs build warnings
  selftests: ublk: organize test directories by test ID
  block: decouple secure erase size limit from discard size limit
  block: remove redundant kill_bdev() call in set_blocksize()
  blk-mq: add documentation for new queue attribute async_dpeth
  block, bfq: convert to use request_queue->async_depth
  mq-deadline: covert to use request_queue->async_depth
  kyber: covert to use request_queue->async_depth
  blk-mq: add a new queue sysfs attribute async_depth
  blk-mq: factor out a helper blk_mq_limit_depth()
  blk-mq-sched: unify elevators checking for async requests
  block: convert nr_requests to unsigned int
  block: don't use strcpy to copy blockdev name
  blk-mq-debugfs: warn about possible deadlock
  blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
  blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
  blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
  blk-rq-qos: fix possible debugfs_mutex deadlock
  blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
  blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
  ...
2026-02-09 17:57:21 -08:00
Maurizio Lombardi
7bb8c40f5a nvme: add support for dynamic quirk configuration via module parameter
Introduce support for enabling or disabling specific NVMe quirks at module
load time through the `quirks` module parameter.
This mechanism allows users to apply known quirks dynamically based on the
device's PCI vendor and device IDs, without requiring to add hardcoded
entries in the driver and recompiling the kernel.

While the generic PCI new_id sysfs interface exists for dynamic
configuration, it is insufficient for scenarios where the system fails
to boot (for example, this has been reported to happen because of the
bogus_nid quirk). The new_id attribute is writable only after the system
has booted and sysfs is mounted.

The `quirks` parameter accepts a list of quirk specifications separated by
a '-' character in the following format:

<VID>:<DID>:<quirk_names>[-<VID>:<DID>:<quirk_names>-..]

Each quirk is represented by its name and can be prefixed with `^` to
indicate that the quirk should be disabled; quirk names are separated by
a ',' character.

Example: enable BOGUS_NID and BROKEN_MSI, disable DEALLOCATE_ZEROES:

   $ modprobe nvme quirks=7170:2210:bogus_nid,broken_msi,^deallocate_zeroes

Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-02-05 07:35:58 -08:00
Keith Busch
071be3b0b6 nvme-pci: handle changing device dma map requirements
The initial state of dma_needs_unmap may be false, but change to true
while mapping the data iterator. Enabling swiotlb is one such case that
can change the result. The nvme driver needs to save the mapped dma
vectors to be unmapped later, so allocate as needed during iteration
rather than assume it was always allocated at the beginning. This fixes
a NULL dereference from accessing an uninitialized dma_vecs when the
device dma unmapping requirements change mid-iteration.

Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Link: https://lore.kernel.org/linux-nvme/20260202125738.1194899-1-pradeep.pragallapati@oss.qualcomm.com/
Reported-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-02-05 07:29:10 -08:00
Roger Pau Monne
a54afbc8a2 nvme-pci: DMA unmap the correct regions in nvme_free_sgls
The call to nvme_free_sgls() in nvme_unmap_data() has the sg_list and sge
parameters swapped.  This wasn't noticed by the compiler because both share
the same type.  On a Xen PV hardware domain, and possibly any other
architectures that takes that path, this leads to corruption of the NVMe
contents.

Fixes: f0887e2a52 ("nvme-pci: create common sgl unmapping helper")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-01-28 06:58:10 -08:00
Ming Lei
5e2fde1a94 block: pass io_comp_batch to rq_end_io_fn callback
Add a third parameter 'const struct io_comp_batch *' to the rq_end_io_fn
callback signature. This allows end_io handlers to access the completion
batch context when requests are completed via blk_mq_end_request_batch().

The io_comp_batch is passed from blk_mq_end_request_batch(), while NULL
is passed from __blk_mq_end_request() and blk_mq_put_rq_ref() which don't
have batch context.

This infrastructure change enables drivers to detect whether they're
being called from a batched completion path (like iopoll) and access
additional context stored in the io_comp_batch.

Update all rq_end_io_fn implementations:
- block/blk-mq.c: blk_end_sync_rq
- block/blk-flush.c: flush_end_io, mq_flush_data_end_io
- drivers/nvme/host/ioctl.c: nvme_uring_cmd_end_io
- drivers/nvme/host/core.c: nvme_keep_alive_end_io
- drivers/nvme/host/pci.c: abort_endio, nvme_del_queue_end, nvme_del_cq_end
- drivers/nvme/target/passthru.c: nvmet_passthru_req_done
- drivers/scsi/scsi_error.c: eh_lock_door_done
- drivers/scsi/sg.c: sg_rq_end_io
- drivers/scsi/st.c: st_scsi_execute_end
- drivers/target/target_core_pscsi.c: pscsi_req_done
- drivers/md/dm-rq.c: end_clone_request

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-20 10:12:54 -07:00
Jens Axboe
df73d3c618 Merge branch 'for-7.0/blk-pvec' into for-7.0/block
* for-7.0/blk-pvec:
  types: move phys_vec definition to common header
  nvme-pci: Use size_t for length fields to handle larger sizes
2026-01-18 06:27:37 -07:00
Nilay Shroff
0edb475ac0 nvme: fix PCIe subsystem reset controller state transition
The commit d2fe192348 (“nvme: only allow entering LIVE from CONNECTING
state”) disallows controller state transitions directly from RESETTING
to LIVE. However, the NVMe PCIe subsystem reset path relies on this
transition to recover the controller on PowerPC (PPC) systems.

On PPC systems, issuing a subsystem reset causes a temporary loss of
communication with the NVMe adapter. A subsequent PCIe MMIO read then
triggers EEH recovery, which restores the PCIe link and brings the
controller back online. For EEH recovery to proceed correctly, the
controller must transition back to the LIVE state.

Due to the changes introduced by commit d2fe192348 (“nvme: only allow
entering LIVE from CONNECTING state”), the controller can no longer
transition directly from RESETTING to LIVE. As a result, EEH recovery
exits prematurely, leaving the controller stuck in the RESETTING state.

Fix this by explicitly transitioning the controller state from RESETTING
to CONNECTING and then to LIVE. This satisfies the updated state
transition rules and allows the controller to be successfully recovered
on PPC systems following a PCIe subsystem reset.

Cc: stable@vger.kernel.org
Fixes: d2fe192348 ("nvme: only allow entering LIVE from CONNECTING state")
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-01-14 07:21:31 -08:00
Nitesh Shetty
91e1c1bcf0 block, nvme: remove unused dma_iova_state function parameter
DMA IOVA state is not used inside blk_rq_dma_map_iter_next, get
rid of the argument.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-13 07:23:39 -07:00
Leon Romanovsky
073b9bf9af nvme-pci: Use size_t for length fields to handle larger sizes
This patch changes the length variables from unsigned int to size_t.
Using size_t ensures that we can handle larger sizes, as size_t is
always equal to or larger than the previously used u32 type.

Originally, u32 was used because blk-mq-dma code evolved from
scatter-gather implementation, which uses unsigned int to describe length.
This change will also allow us to reuse the existing struct phys_vec in places
that don't need scatter-gather.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-06 05:47:54 -07:00
Ilikara Zheng
340f4fc550 nvme-pci: disable secondary temp for Wodposit WPBSNM8
Secondary temperature thresholds (temp2_{min,max}) were not reported
properly on this NVMe SSD. This resulted in an error while attempting to
read these values with sensors(1):

  ERROR: Can't get value of subfeature temp2_min: I/O error
  ERROR: Can't get value of subfeature temp2_max: I/O error

Add the device to the nvme_id_table with the
NVME_QUIRK_NO_SECONDARY_TEMP_THRESH flag to suppress access to all non-
composite temperature thresholds.

Cc: stable@vger.kernel.org
Tested-by: Wu Haotian <rigoligo03@gmail.com>
Signed-off-by: Ilikara Zheng <ilikara@aosc.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-12-15 07:14:40 -08:00
Jens Axboe
0f45353dd4 nvme updates for Linux 6.19
- Subsystem usage cleanups (Max)
  - Endpoint device fixes (Shin'ichiro)
  - Debug statements (Gerd)
  - FC fabrics cleanups and fixes (Daniel)
  - Consistent alloc API usages (Israel)
  - Code comment updates (Chu)
  - Authentication retry fix (Justin)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmkyEDQACgkQPe3zGtjz
 RgnY0w//VDEwG8L9jVHgK6oGaABVhT0QhEGs6RcwsRvXeQT81TRU3aazS3VWQ281
 +HZxM+8Jnhlg7FYZTV6+pTjgSzr7hvrEtDSm+1wCC6t2FtmVeluka/NedX15JA+/
 JUo5Tged3qckQZPDjFbxCuSwjGJdWyCkyaBQqEFTYyP59M5yf+KGKOzO5nleSBp2
 txWKYXscuoee0SH/0bSm6YuzlNcX2vW++O+6y3v73gxF4vGxUSvTnJdUJW6NYtgy
 Fj7a5FTIwvBw3Pdr3CBmtD6OWdYDbAlvRSowdUzE8ItQiI7vbkbVkSJhTOLFHzCV
 ZX2xnRV97jOLijXFroUA/+o0naW/0W7xls+aIfAEyXfBTP9kFdQL/iB6bWwLudEK
 ZELZyBcn6b0bDPuxUWnZfhu/NqjDQ2/PV+lz9ULo903gz66AljXm3LQtldrePBku
 XFPPbbeahCogizyAxFOwZGTPQbcMhqEgq9Afet8yq9V9ZtVMTAf6C1/TySE2dldT
 Xg9SpJttb2Tx8XqMYvSUptSDHqeA8NKhwjlDj+h0zxXRfRGcmyk6HG3yCUX1wOOc
 gR3vzgCfRi3YHvfrxTiPea/ev/0YpFkX4NA3U+4hXFc8ue/xwpQwevyN6+fgpHH1
 WRjTS5t6icJnkwIKQTXz6acwKsQsWwFoMdXQUzzZopaR2BvLCVI=
 =aPBc
 -----END PGP SIGNATURE-----

Merge tag 'nvme-6.19-2025-12-04' of git://git.infradead.org/nvme into block-6.19

Pull NVMe updates from Keith:

"- Subsystem usage cleanups (Max)
 - Endpoint device fixes (Shin'ichiro)
 - Debug statements (Gerd)
 - FC fabrics cleanups and fixes (Daniel)
 - Consistent alloc API usages (Israel)
 - Code comment updates (Chu)
 - Authentication retry fix (Justin)"

* tag 'nvme-6.19-2025-12-04' of git://git.infradead.org/nvme:
  nvme-fabrics: add ENOKEY to no retry criteria for authentication failures
  nvme-auth: use kvfree() for memory allocated with kvcalloc()
  nvmet-tcp: use kvcalloc for commands array
  nvmet-rdma: use kvcalloc for commands and responses arrays
  nvme: fix typo error in nvme target
  nvmet-fc: use pr_* print macros instead of dev_*
  nvmet-fcloop: remove unused lsdir member.
  nvmet-fcloop: check all request and response have been processed
  nvme-fc: check all request and response have been processed
  nvme-fc: don't hold rport lock when putting ctrl
  nvme-pci: add debug message on fail to read CSTS
  nvme-pci: print error message on failure in nvme_probe
  nvmet: pci-epf: fix DMA channel debug print
  nvmet: pci-epf: move DMA initialization to EPC init callback
  nvmet: remove redundant subsysnqn field from ctrl
  nvmet: add sanity checks when freeing subsystem
2025-12-04 20:58:19 -07:00
Linus Torvalds
cc25df3e2e for-6.19/block-20251201
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmktsoMQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpuiUD/92eivL+HmOh10o8trvxajB0yuyqfSjHHrL
 g+xUbF4s9bgAg/v+Upx7sTY8jdrTcMjKov+G9T6uPvBMqVmeVdZckA1PSAKQaIX1
 Zb7nS2LnO7F6JKbwpwVrrIaqVbcz8MfGIIMbN4yNNEOMCwdIVMp4fo7trPBknJNx
 WddNSGUFlIF3NqSI8AflSS/pYnGm+McfBHXBpJAKipI3iquKKubHv+FX9kLp7Tn4
 x27ZoCWOHglIBTJXU0mmXCVsLF8b5BA8DQcGtT62azb8+l0cRTkaHY0DFAv5BvhG
 TqcjrKdmR0cGSNt+nEmFrujE3atBRl0G0kiHA80YgA1MTtYzdPaUVOUtM9k/rEem
 gpiGMDpBypdxyJAyijPSaVJdfcg0psOlYbhIR4N2wbj/dq8268h+cWzXlF1spgVt
 /7ygoaCmfMNbTy9rKThTjH+es787AVXUAXXaPHhIFsnCKUj8xQl4pT7XltmgYeWx
 1/XD1NEJeLHHog5upAVlGX3H5tbvP1nIICxbZa9mDOJX1rwxxI7/s/RucPjbNXuY
 AiaKPTfxtB9+Ihd2HrJ/76RVMkckcOBc4GIKoFfwuKDbcdLXQ5FcZCmVRoI1V9SV
 KsH7JBgihLwR9XWKE1vp9+CBNe1Qlu3K4IjG/E7CNLeuDntIBu73ihqGP/DqV6Bq
 RX1Dc0OyAQ==
 =m22w
 -----END PGP SIGNATURE-----

Merge tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

 - Fix head insertion for mq-deadline, a regression from when priority
   support was added

 - Series simplifying and improving the ublk user copy code

 - Various ublk related cleanups

 - Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
   request is punted to a thread for handling

 - Merge and then later revert loop dio nowait support, as it ended up
   causing excessive stack usage for when the inline issue code needs to
   dip back into the full file system code

 - Improve auto integrity code, making it less deadlock prone

 - Speedup polled IO handling, but manually managing the hctx lookups

 - Fixes for blk-throttle for SSD devices

 - Small series with fixes for the S390 dasd driver

 - Add support for caching zones, avoiding unnecessary report zone
   queries

 - MD pull requests via Yu:
      - fix null-ptr-dereference regression for dm-raid0
      - fix IO hang for raid5 when array is broken with IO inflight
      - remove legacy 1s delay to speed up system shutdown
      - change maintainer's email address
      - data can be lost if array is created with different lbs devices,
        fix this problem and record lbs of the array in metadata
      - fix rcu protection for md_thread
      - fix mddev kobject lifetime regression
      - enable atomic writes for md-linear
      - some cleanups

 - bcache updates via Coly
      - remove useless discard and cache device code
      - improve usage of per-cpu workqueues

 - Reorganize the IO scheduler switching code, fixing some lockdep
   reports as well

 - Improve the block layer P2P DMA support

 - Add support to the block tracing code for zoned devices

 - Segment calculation improves, and memory alignment flexibility
   improvements

 - Set of prep and cleanups patches for ublk batching support. The
   actual batching hasn't been added yet, but helps shrink down the
   workload of getting that patchset ready for 6.20

 - Fix for how the ps3 block driver handles segments offsets

 - Improve how block plugging handles batch tag allocations

 - nbd fixes for use-after-free of the configuration on device clear/put

 - Set of improvements and fixes for zloop

 - Add Damien as maintainer of the block zoned device code handling

 - Various other fixes and cleanups

* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
  block/rnbd: correct all kernel-doc complaints
  blk-mq: use queue_hctx in blk_mq_map_queue_type
  md: remove legacy 1s delay in md_notify_reboot
  md/raid5: fix IO hang when array is broken with IO inflight
  md: warn about updating super block failure
  md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
  sbitmap: fix all kernel-doc warnings
  ublk: add helper of __ublk_fetch()
  ublk: pass const pointer to ublk_queue_is_zoned()
  ublk: refactor auto buffer register in ublk_dispatch_req()
  ublk: add `union ublk_io_buf` with improved naming
  ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
  kfifo: add kfifo_alloc_node() helper for NUMA awareness
  blk-mq: fix potential uaf for 'queue_hw_ctx'
  blk-mq: use array manage hctx map instead of xarray
  ublk: prevent invalid access with DEBUG
  s390/dasd: Use scnprintf() instead of sprintf()
  s390/dasd: Move device name formatting into separate function
  s390/dasd: Remove unnecessary debugfs_create() return checks
  s390/dasd: Fix gendisk parent after copy pair swap
  ...
2025-12-03 19:26:18 -08:00
Gerd Bayer
78723fe309 nvme-pci: add debug message on fail to read CSTS
Add a debug log spelling out that reading the CSTS register failed - to
distinguish this from other reasons for ENODEV.

Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-12-01 13:45:57 -08:00
Gerd Bayer
c9adfb5b68 nvme-pci: print error message on failure in nvme_probe
Add a new error message that makes failures to probe visible in the
kernel log, like:
nvme 0008:00:00.0: error -ENODEV: probe failed

This highlights issues with a particular device right away instead of
leaving users to search for missing drives.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-12-01 13:45:57 -08:00
Leon Romanovsky
37f0c7a8df block-dma: properly take MMIO path
In commit eadaa8b255 ("dma-mapping: introduce new DMA attribute to
indicate MMIO memory"), DMA_ATTR_MMIO attribute was added to describe
MMIO addresses, which require to avoid any memory cache flushing, as
an outcome of the discussion pointed in Link tag below.

In case of PCI_P2PDMA_MAP_THRU_HOST_BRIDGE transfer, blk-mq-dm logic
treated this as regular page and relied on "struct page" DMA flow.
That flow performs CPU cache flushing, which shouldn't be done here,
and doesn't set IOMMU_MMIO flag in DMA-IOMMU case.

As a solution, let's encode peer-to-peer transaction type in NVMe IOD
flags variable and provide it to blk-mq-dma API.

Link: https://lore.kernel.org/all/f912c446-1ae9-4390-9c11-00dce7bf0fd3@arm.com/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-14 05:09:56 -07:00
Leon Romanovsky
61d43b1731 nvme-pci: migrate to dma_map_phys instead of map_page
After introduction of dma_map_phys(), there is no need to convert
from physical address to struct page in order to map page. So let's
use it directly.

Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-14 05:09:56 -07:00
Keith Busch
bc840b21a2 nvme: remove virtual boundary for sgl capable devices
The nvme virtual boundary is only required for the PRP format. Devices
that can use SGL for DMA don't need it for IO queues. Drop reporting it
for such devices; rdma fabrics controllers will continue to use the
limit as they currently don't report any boundary requirements, but tcp
and fc never needed it in the first place so they get to report no
virtual boundary.

Applications may continue to align to the same virtual boundaries for
optimization purposes if they want, and the driver will continue to
decide whether to use the PRP format the same as before if the IO allows
it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-06 18:11:58 -07:00
Keith Busch
0194b65ab5 nvme-pci: use blk_map_iter for p2p metadata
The dma_map_bvec helper doesn't work for p2p data, so use the same
blk_map_iter method that sgl uses for this memory type.

Reported-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-10-22 19:46:25 -07:00
Jens Axboe
7378b003e9 nvme updates for Linux 6.18
- FC target fixes (Daniel)
  - Authentication fixes and updates (Martin, Chris)
  - Admin controller handling (Kamaljit)
  - Target lockdep assertions (Max)
  - Keep-alive updates for discovery (Alastair)
  - Suspend quirk (Georg)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmjTIjEACgkQPe3zGtjz
 Rgk2DxAAhPtEuwJQkrC8+HqoUXyWx7nI+3bmY1w8iGZQhVQvc9AiVBG9D2hxcUIQ
 AFEZRKt08qctSf+Z/hLJZy6Npdzinlo60W6bChgDYGxu03VT37baOgVDFQbLy3qy
 zYX5Z7ykDCJToEsqkPNNGjt1kKyJlEJmFYDSweE2zIw3LFuJ0HBYs/uSg4JHjFoE
 QUNvAiAJM8vwlTestVX4c+n9sDBkSKC/NnSm9wwU/tqyaPR2RvS2/zZ8JTk3XOGJ
 0URps2ilnVGmyr5iHpFYG/xvl/OTfJqyjFrroYcBjV/e+EMt5EBvcsdfz2emLksB
 nXTVj1EClcyIXPSTNKbbhIFFMgFZn5AQEtIUjUMpEHvWCom04JEu6NTfBzdtEKlQ
 nf/BIfbtY2MhHUJwiZktY7do+VhTVSEGZhWmKYTv2QyaM9MhIkey773agnmf5D1X
 QHVeX6pVqcyIv3NE8cv6VpevjsY+WrYaHkeXUlu+2I0hH8I2VFzY56an39GxxlZP
 LGaIE8BNzu/32xmsHgzI2vgYdVXskHDIpRgWM/zro93mT/IJT+Da8VOCrenizlIJ
 jotKxDx14RGz4O69q3zrRMahKimfKsP3XWYSUfroiVPHFeBDDn3T25UH+/GaVMqc
 6II0ztnAjWJjgqTU2/P9aDdb5abnKTjUh6oPZIw8Wa1jSZFHIBM=
 =PsS2
 -----END PGP SIGNATURE-----

Merge tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme into for-6.18/block

Pull NVMe updates from Keith:

" - FC target fixes (Daniel)
  - Authentication fixes and updates (Martin, Chris)
  - Admin controller handling (Kamaljit)
  - Target lockdep assertions (Max)
  - Keep-alive updates for discovery (Alastair)
  - Suspend quirk (Georg)"

* tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme:
  nvme: Use non zero KATO for persistent discovery connections
  nvmet: add safety check for subsys lock
  nvme-core: use nvme_is_io_ctrl() for I/O controller check
  nvme-core: do ioccsz/iorcsz validation only for I/O controllers
  nvme-core: add method to check for an I/O controller
  nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk
  nvme-auth: use hkdf_expand_label()
  nvme-auth: add hkdf_expand_label()
  nvme-tcp: send only permitted commands for secure concat
  nvme-fc: use lock accessing port_state and rport state
  nvmet-fcloop: call done callback even when remote port is gone
  nvmet-fc: avoid scheduling association deletion twice
  nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
  nvme-auth: update bi_directional flag
2025-09-23 23:12:20 -06:00
Georg Gottleuber
eeaed48980 nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk
On the TUXEDO InfinityBook S Gen8, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (3.5 watts).

This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1 watts.

Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-09-16 11:16:29 -07:00