The Lenovo GameZone/Other interfaces have some delicate divergences
among different devices. When making a bug report or adding support for
new devices/interfaces, capdata is the most important information to
cross-check with.
Add a debugfs file (lenovo_wmi/<device_name>/capdata), so that users can
dump capdata and include it in their reports.
Since `struct capdata01' is just an extension to `struct capdata00',
also convert the former to include the latter anonymously
(-fms-extensions, since v6.19). This is declared as a union in the
capdata01 struct, with both the anonymous declaration and as a named
member to avoid type casting when passing just the capdata00 struct
pointer.
Tested-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
We are about to add debugfs support for lenovo-wmi-capdata. Let's setup
a debugfs directory called "lenovo_wmi" for tidiness, so that any
lenovo-wmi-* device can put its subdirectory under the directory.
Subdirectories will be named after the corresponding WMI devices.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some Lenovo BIOS have been shown to have incomplete and/or broken
capability data and WMI attribute IDs. In some cases the capability data
reports that a feature is not supported when the get/set methods are
fully implemented. It is also possible that the ACPI methods from the
ideapad_laptop driver we defer to could be bugged while the WMI method
is fully working. To aid end users in submitting more complete bug
reports in these situations, add an override to skip the ACPI and
compatibility checks to force load the power supply extension as if it
is fully supported and has no conflicts.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add charge_behaviour and charge_types attributes through a power supply
extension for devices that support WMI based charge enable & disable.
Lenovo Legion devices that implement WMI function and capdata ID
0x03010001 in their BIOS are able to enable or disable charging at 80%
through the lenovo-wmi-other interface. Add a charge_types attribute for
BATX devices to expose this capability with Standard and Long_Life types
enabled.
Additionally, devices that support WMI function and capdata ID 0x03020000
are able to force discharge of the battery. Expose this capability with
a charge_behaviour attribute in the power supply extension, with the auto
and force-discharge behaviors enabled. The GET method for this attribute
is bugged. After analyzing the DSDT, and some testing, it appears the
method grabs bit(3) instead of bit(4) from the EC register that stores the
current status, and will only report if charging has been inhibited or
not. To work around this, store and report the last setting written to the
attribute.
As some devices only expose one attribute or the other, a bitmask is
added with a lookup table and some helper macros to select the correct
configuration for the hardware at runtime.
The ideapad_laptop driver provides the charge_types attribute to provide
similar functionality. When the WMI method is set this can corrupt the
ACPI method return and cause hardware and driver errors. To avoid
conflicts between the drivers, we get the acpi_handle and do the same
check that ideapad_laptop does when it enables the feature. If the
feature is supported in ideapad_laptop, abort adding the extension from
lenovo-wmi-other. The ACPI method is more reliable when both are
present from my testing, so we can prefer that implementation and do
not need to worry about de-conflicting from inside that driver.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In the next patch a power supply extension is added which requires
a name attribute. Instead of creating another const macro with the
same information, rename LWMI_OM_FW_ATTR_BASE_PATH to
LWMI_OM_SYSFS_NAME.
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use an enum for all GPU attribute feature ID's and add GPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use an enum for all device ID's and CPU attribute feature ID's,
add missing CPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo diagnostics and support team have requested a mechanism
to get the raw data from the HWDD commands to support customer debug
situations.
Add a debugfs entry to display the HWDD raw data.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260429015210.1863316-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_is_attr_01_supported, and only creates the attribute subfolder
if the attribute is supported by the hardware. Due to some poorly
implemented BIOS this is a multi-step sequence of events. This is
because:
- Some BIOS support getting the capability data from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS support get/set for the current value from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS report capability data for a method that is not fully
implemented.
- Some BIOS have methods fully implemented, but no complimentary
capability data.
To ensure we only expose fully implemented methods with corresponding
capability data, we check each outcome before reporting that an
attribute can be supported.
Checking for lwmi_is_attr_01_supported during remove is not done to
ensure that we don't attempt to call cd01 or send WMI events if one of
the interfaces being removed was the cause of the driver unloading.
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Kurt Borja <kuurtb@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/DG60P3SHXR8H.3NSEHMZ6J7XRC@gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-10-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_attr_id() function. In the same vein as LWMI_ATTR_ID_FAN_RPM(),
but as a generic, to de-duplicate attribute_id assignment boilerplate.
Adds tunable_attr_01_id() function that breaks out the members of a
tunable_attr_01 struct and passes them to lwmi_attr_id().
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-9-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, lenovo-wmi-gamezone depends on lenovo-wmi-other as the former
imports symbols from the latter. The imported symbols are just used to
register a notifier block. However, there is no runtime dependency
between both drivers, and either of them can run without the other,
which is the major purpose of using the notifier framework.
Such a link-time dependency is non-optimal. A previous attempt to "fix"
it made LENOVO_WMI_GAMEZONE select LENOVO_WMI_TUNING, which was
fundamentally broken and resulted in undefined Kconfig behavior, as
`select' cannot be used on a symbol with potentially unmet dependencies.
Decouple both drivers by moving the thermal mode notifier chain to
lenovo-wmi-helpers. Methods for notifier block (un)registration are
exported for lenovo-wmi-gamezone, while a method for querying the
current thermal mode are exported for lenovo-wmi-other.
This turns the dependency graph from
+------------ lenovo-wmi-gamezone
| |
v |
lenovo-wmi-helpers |
^ |
| V
+------------ lenovo-wmi-other
into
+------------ lenovo-wmi-gamezone
|
v
lenovo-wmi-helpers
^
|
+------------ lenovo-wmi-other
To make it clear, the name of the notifier chain is also renamed from
`om_chain_head' to `tm_chain_head', indicating that it's used to query
the current thermal mode.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 6e38b9fcbf ("platform/x86: lenovo: gamezone needs "other mode"")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603252259.gHvJDyh3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202603260302.X0NjQOda-lkp@intel.com/
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In struct tunable_attr_01 the capdata pointer is unused and the size of
the id members is u32 when it should be u8. Fix these prior to adding
additional members.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds explicit initialization of wmi_method_args_32 declarations with
zero values to prevent uninitialized data from being sent to the device
BIOS when passed.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/platform-driver-x86/95c7e7b539dd0af41189c754fcd35cec5b6fe182.camel@rong.moe/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When lwmi_om_master_bind() fails, the master device's components are
left bound, with the aggregate device destroyed due to the failure
(found by sashiko.dev [1]).
Balance calls to component_bind_all() and component_unbind_all() when an
error is propagated to the component framework.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-4-derekjohn.clark@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the IDA id is only freed on wmi-other device removal or
failure to create firmware-attributes device, kset, or attributes. It
leaks IDA ids if the wmi-other device is bound multiple times, as the
unbind callback never frees the previously allocated IDA id.
Additionally, if the wmi-other device has failed to create a
firmware-attributes device before it gets removed, the wmi-device
removal callback double frees the same IDA id.
These bugs were found by sashiko.dev [1].
Fix them by moving ida_free() into lwmi_om_fw_attr_remove() so it is
balanced with ida_alloc() in lwmi_om_fw_attr_add(). With them fixed,
properly set and utilize the validity of priv->ida_id to balance
firmware-attributes registration and removal, without relying on
propagating the registration error to the component framework, which is
more reliable and aligns with the hwmon device registration and removal
sequences.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: e521d16e76 ("platform/x86: Add lenovo-wmi-helpers")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove an unneeded goto statement in hotkey_kthread(). Since
the function has a single exit location with no cleanup code,
the jump provides no benefit. Per the kernel coding style,
returning directly is preferred over goto in such case [1].
[1] https://www.kernel.org/doc/html/latest/process/coding-style.html
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Tested-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260425063936.9360-1-eduardo@eduardovasconcelos.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- asus-wmi:
- Retain battery charge threshold during boot which avoids unsolicited
change to 100%. Return -ENODATA when the limit is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
- barco-p50-gpio: Normalize gpio_get return values
- bitland-mifs-wmi: Add driver for Bitland laptops (supports platform
profile,hwmon, kbd backlight, gpu mode, hotkeys, and
fan boost)
- dell_rbu: Fix using uninitialized value in sysfs write function
- dell-wmi-sysman: Respect destination length when constructing enum
strings
- hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX
16-ak0xxxx
- input: trackpoint & thinkpad_acpi: Enable doubletap by default and
add sysfs enable/disable
- int3472: Add support for GPIO type 0x02 (IR flood LED)
- intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
- intel/vsec: Refactor to support ACPI-enumerated PMT endpoints.
- pcengines-apuv2: Attach software node to the gpiochip
- uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
- wmi: Perform output size check within WMI core to allow simpler WMI
drivers
- acpi_driver -> platform driver conversions (a large number of changes
from Rafael J. Wysocki)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wmi:
- adjust screenpad power/brightness handling
- do not enforce a battery charge threshold
- fix screenpad brightness range
barco-p50-gpio:
- convert to guard() notation
- normalize return value of gpio_get
bitland-mifs-wmi:
- Add new Bitland MIFS WMI driver
dell/dell-rbtn:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
dell_rbu:
- avoid uninit value usage in packet_size_write()
dell-wmi-sysman:
- bound enumeration string aggregation
- Clean up security buffer helpers
- Fix typo in function comment
- Use standard kobj_sysfs_ops
- Use sysfs_emit{_at} in show functions
Documentation: laptops:
- Update documentation for uniwill laptops
Documentation:
- thinkpad-acpi - Document doubletap_enable attribute
eeepc-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
fujitsu:
- Convert backlight driver to a platform one
- Convert laptop driver to a platform one
- Register ACPI notify handlers directly
- Reorder code to avoid forward declarations
fujitsu-tablet:
- Convert ACPI driver to a platform one
hp-wmi:
- add locking for concurrent hwmon access
- add Omen 14-fb0xxx (board 8C58) support
- Add support for Omen 16-n0xxx (8A44)
- Add support for Omen 16-wf1xxx (8C77)
- Add support for OMEN MAX 16-ak0xxx (8D87)
- avoid cancel_delayed_work_sync from work handler
- fix fan table parsing
- fix ignored return values in fan settings
- fix u8 underflow in gpu_delta calculation
- Ignore backlight and FnLock events
- use mod_delayed_work to reset keep-alive timer
input:
- trackpoint - Enable doubletap by default on capable devices
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
- Parameterize LED con_id in registration
- Rename pled to led in LED registration code
- Use local variable for LED struct access
intel/rst:
- Convert ACPI driver to a platform one
intel/smartconnect:
- Convert ACPI driver to a platform one
intel/tpmi:
- Use 32 bit aligned address for debugfs mem write
intel/vsec:
- Decouple add/link helpers from PCI
- Make driver_data info const
- Plumb ACPI PMT discovery tables through vsec
- Refactor base_addr handling
- Return real error codes from registration path
- Switch exported helpers from pci_dev to device
lg-laptop:
- Convert ACPI driver to a platform one
- Drop debug-only ACPI notify handler
nvsw-sn2201:
- Drop unused include
panasonic-laptop:
- Convert ACPI driver to a platform one
- Fix OPTD notifier registration and cleanup
- Make pcc_register_optd_notifier() void
- Register ACPI notify handler directly
- Remove redundant checks from 3 functions
pcengines-apuv2:
- attach software node to the gpiochip
sony-laptop:
- Convert NC driver to a platform one
- Convert PIC driver to a platform one
- Register ACPI notify handler directly
surface: hotplug:
- Correct inclusion for GPIO APIs
surface: surfacepro3_button:
- Convert to a platform driver
- Drop wakeup source on remove
- Register ACPI notify handler
system76:
- Convert ACPI driver to a platform one
- Drop redundant devm_led_classdev_unregister()
- Register ACPI notify handler directly
thinkpad_acpi:
- Add sysfs control for TrackPoint double-tap
- Drop ACPI driver registration
- remove obsolete TODO comment
- use seq_puts() instead of seq_printf()
tools/power/x86/intel-speed-select:
- Avoid current base freq as maximum
- Fix cpu extended family ID decoding
- Fix output when running on unsupported CLX platforms
- Fix some program return value
- Print Version info when Incompatible API version is detected
- v1.26 release
topstar-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_acpi:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
- Reorder code to avoid forward declaration
toshiba_bluetooth:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_haps:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
uniwill-laptop:
- Apply features across all TUXEDO devices
- Fix signedness bug
- Fix XMG Fusion 15 (L19) entries
- Implement USB-C power priority setting
- Rework hwmon feature defines
wireless-hotkey:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
wmi:
- Add wmidev_invoke_procedure()
- Convert drivers to use wmidev_invoke_procedure()
- Extend wmidev_invoke_method() to reject undersized data
- Extend wmidev_query_block() to reject undersized data
- Prepare to reject undersized unmarshalling results
- Replace .no_notify_data with .min_event_size
x86:
- remove unnecessary module_init/exit() functions
Merges:
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge tag 'fixes' into 'for-next'
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaeYxSwAKCRBZrE9hU+XO
MRzTAQCPUKVOpSY/cjtPXVBn0uJbAo1MSvytv00Kv7dcatvrrwEA9lqmwOfl0kzr
CowEVVCD3om++W9vOsL65hachbAl1QA=
=1qkw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
WMI drivers using the buffer-based WMI API are expected to reject
undersized event payloads. Extend the WMI driver core to allow
such drivers to specify their minimum supported event payload size.
Also remove the now redundant .no_notify_data field.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-7-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
This patch removes the obsolete TODO comment regarding fan speed
presets in fan_write_cmd_speed. After discussion with the
maintainers, it was decided that fixed presets (low/medium/high)
are not suitable due to platform-specific variations.
Signed-off-by: Daniil Bulgar <bulgardaniil18@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260407190546.109900-1-bulgardaniil18@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is no point in registering an ACPI driver that only has an empty
.add() callback, which is done by the thinkpad_acpi driver, since
after binding to an ACPI device it only sits there and does nothing.
That binding only effectively causes the ACPI device's reference count
to increase, but that can be achieved by using acpi_get_acpi_dev()
instead of acpi_fetch_acpi_dev() in setup_acpi_notify(), and doing
the corresponding cleanup in ibm_exit().
Update the code accordingly and get rid of the non-functional ACPI
driver.
No intentional functional impact beyond altering sysfs content.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/3949487.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and New HW Support
- amd/hsmp: Fix typo in error message
- asus-armoury: Add support for G614FP, GA503QM, GZ302EAC, and GZ302EAC
- asus-nb-wmi: Add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
- hp-wmi: Support for Omen 16-k0xxx, 16-wf1xxx, 16-xf0xxx
- intel-hid: Disable wakeup_mode during hibernation
- ISST:
- Check HWP support before MSR access
- Correct locked bit width
- lenovo: wmi-gamezone: Drop unused gz_chain_head
- olpc-xo175-ec: Fix overflow error message
The following is an automated shortlog grouped by driver:
amd/hsmp:
- Fix typo in error message
asus-armoury:
- add support for G614FP
- add support for GA503QM
- add support for GZ302EA and GZ302EAC
asus-nb-wmi:
- add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
hp-wmi:
- Add Omen 16-xf0xxx (8BCA) support
- Add support for Omen 16-k0xxx (8A4D)
- Add support for Omen 16-wf1xxx (8C76)
intel-hid:
- disable wakeup_mode during hibernation
ISST:
- Check HWP support before MSR access
- Correct locked bit width
lenovo: wmi-gamezone:
- Drop gz_chain_head
MAINTAINERS:
- change email address of Denis Benato
olpc: olpc-xo175-ec:
- Fix overflow error message to print inlen
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCacPa+wAKCRBZrE9hU+XO
Mf/1AP9M2dbDElMJQtS8wrcyML5xgGGInfzXACXaQKhVV6ZYugD8DDDdxdtreT+E
1eb8adT4cyGTW8s2YvJFeAD3FXY+FgU=
=ktTR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCacvZhgAKCRBZrE9hU+XO
MQNHAP4yxM/7280O22QTWRSLGbaCkpxYiyXuo/7Vp/LUnVAbVQD+K0FCXj2A1pWW
IXjfKpmDExlnzrO1L5g/4v+/d1zr7gI=
=MOOt
-----END PGP SIGNATURE-----
Merge tag 'fixes' into 'for-next'
Allows uniwill-laptop feature work that depends on changes in the fixes
branch proceed.
The gz_chain_head variable has been unused since the driver's initial
addition to the tree. Its use was eliminated between v3 and v4 during
development but due to the reference of gz_chain_head's wait_list
member, the compiler could not warn that it was unused.
After a (tip) commit ("locking/rwsem: Remove the list_head from struct
rw_semaphore"), which removed a reference to the variable passed to
__RWSEM_INITIALIZER(), certain configurations show an unused variable
warning from the Lenovo wmi-gamezone driver:
drivers/platform/x86/lenovo/wmi-gamezone.c:34:31: warning: 'gz_chain_head' defined but not used [-Wunused-variable]
34 | static BLOCKING_NOTIFIER_HEAD(gz_chain_head);
| ^~~~~~~~~~~~~
include/linux/notifier.h:119:39: note: in definition of macro 'BLOCKING_NOTIFIER_HEAD'
119 | struct blocking_notifier_head name = \
| ^~~~
Remove the variable to prevent the warning from showing up.
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260313-lenovo-wmi-gamezone-remove-gz_chain_head-v1-1-ce5231f0c6fa@kernel.org
[ij: reorganized the changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a sysfs attribute to enable or disable TrackPoint double-tap hotkey
events at the kernel level.
The TrackPoint firmware enables double-tap support automatically. This
interface allows userspace to control whether double-tap events are
forwarded to userspace.
The attribute is available at:
/sys/devices/platform/thinkpad_acpi/doubletap_enable
0 - Disable double-tap hotkey events
1 - Enable double-tap hotkey events (default)
Filtering is implemented by suppressing ACPI hotkey delivery without
injecting synthetic input events.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260311143144.482145-3-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI_AC_CLASS symbol is defined in several places in the same way
which is rather unfortunate.
Instead, define it in one common header file (acpi_bus.h) so that it is
accessible to all of its users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/6163384.MhkbZ0Pkbq@rafael.j.wysocki
checkpatch.pl reported warnings where seq_printf() was used for simple
strings with no format specifiers.
Replace these instances with seq_puts() to avoid the overhead of runtime
string parsing and to conform to kernel coding standards.
Signed-off-by: Coby McKinney <coby@bytemap.space>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260202205214.18898-1-coby@bytemap.space
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Check whether the battery supports the relevant charge threshold before
reading the value to silence these errors:
thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCTG: evaluate failed
thinkpad_acpi: acpi_evalf(BCSG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCSG: evaluate failed
when reading the charge thresholds via sysfs on platforms that do not
support them such as the ThinkPad T400.
Fixes: 2801b9683f ("thinkpad_acpi: Add support for battery thresholds")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202619
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/MI0P293MB01967B206E1CA6F337EBFB12926CA@MI0P293MB0196.ITAP293.PROD.OUTLOOK.COM
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The LWMI_SUPP_MAY_{GET,SET} macros are fundamentally broken. When I
introduced them, I meant to check LWMI_SUPP_VALID *and* the
corresponding bits for get/set capabilities. However, `supported &
LWMI_SUPP_MAY_{GET,SET}' means *or*, so it accidentally passes the check
when LWMI_SUPP_VALID is set.
Fix them by only including the corresponding get/set bit without
LWMI_SUPP_VALID. Meanwhile, rename them to LWMI_SUPP_{GET,SET} to make
them less confusing.
Fixes: 67d9a39ce8 ("platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260207172327.80111-1-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This commit makes some style changes to clean up the following
checkpatch warnings and checks at various places in ideapad.c:
- WARNING: quoted string split across lines
- WARNING: space prohibited between function name and open parenthesis '('
- WARNING: braces {} are not necessary for any arm of this statement
- CHECK: Alignment should match open parenthesis
We exceed the 80 column limit to fix the quoted string warning since
strings in question are user visible. See coding style, part 2 for
details.
Signed-off-by: Benjamin Philip <benjamin.philip495@gmail.com>
Acked-by: Ike Panhc <ikepanhc@gmail.com>
Link: https://patch.msgid.link/20260106184830.34426-1-benjamin.philip495@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Register an HWMON device for fan reporting/tuning according to
Capability Data 00 (capdata00) and Fan Test Data (capdata_fan) provided
by lenovo-wmi-capdata. The corresponding HWMON nodes are:
- fanX_div: internal RPM divisor
- fanX_input: current RPM
- fanX_max: maximum RPM
- fanX_min: minimum RPM
- fanX_target: target RPM (tunable, 0=auto)
Information from capdata00 and capdata_fan are used to control the
visibility and constraints of HWMON attributes. Fan info from capdata00
is collected on bind, while fan info from capdata_fan is collected in a
callback. Once all fan info is collected, register the HWMON device.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20260120182104.163424-8-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A capdata00 attribute (0x04050000) describes the presence of Fan Test
Data. Query it, and bind Fan Test Data as a component of capdata00
accordingly. The component master of capdata00 may pass a callback while
binding to retrieve fan info from Fan Test Data.
Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan
|- master |- component |
|- sub-master |- sub-component
The callback will be called once both the master and the sub-component
are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presence of WMI GUIDs
- The notifier framework cannot cleanly connect capdata_fan to
lenovo-wmi-other without introducing assumptions on probing sequence
capdata00 is registered as a component and a sub-master on probe,
instead of chaining the registrations in one's bind callback. This is
because calling (un)registration methods of the component framework
causes deadlock in (un)bind callbacks, i.e., it's impossible to register
capdata00 as a sub-master/component in its component/sub-master bind
callback, and vice versa.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260120182104.163424-7-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for LENOVO_FAN_TEST_DATA WMI data block. Provides an
interface for querying the min/max fan speed RPM (reference data) of a
given fan ID.
This interface is optional. Hence, it does not bind to lenovo-wmi-other
and is not registered as a component for the moment. Appropriate binding
will be implemented in the subsequent patch.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260120182104.163424-6-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for LENOVO_CAPABILITY_DATA_00 WMI data block that comes on
"Other Mode" enabled hardware. Provides an interface for querying if a
given attribute is supported by the hardware, as well as its default
value.
capdata00 always presents on devices with capdata01. lenovo-wmi-other
now binds to both (no functional change intended).
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260120182104.163424-5-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current implementation are heavily bound to capdata01. Rewrite it so
that it is suitable to utilize other Capability Data as well.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260120182104.163424-4-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prepare for the upcoming changes to make it suitable to retrieve
and provide other Capability Data as well.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260120182104.163424-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Windows WMI-ACPI driver converts all ACPI objects into a common
buffer format, so returning a buffer with four bytes will look like an
integer for WMI consumers under Windows.
Therefore, some devices may simply implement the corresponding ACPI
methods to always return a buffer. While lwmi_dev_evaluate_int() expects
an integer (u32), convert returned >=4B buffer into u32 to support these
devices.
Suggested-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/f1787927-b655-4321-b9d9-bc12353c72db@gmx.de/
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260120182104.163424-2-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add new sysfs interface to identify the impacted component with location of
device.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Nitin Joshi <nitjoshi@gmail.com>
Link: https://patch.msgid.link/20260106174519.6402-2-nitjoshi@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Thinkpads are adding the ability to detect and report hardware damage
status. Add new sysfs interface to identify whether hardware damage
is detected or not.
Initial support is available for the USB-C replaceable connector.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Nitin Joshi <nitjoshi@gmail.com>
Link: https://patch.msgid.link/20260106174519.6402-1-nitjoshi@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This commit cleans up the following checks flagged by checkpatch in
yogabook.c:
- CHECK: Prefer kernel type 'u8' over 'uint8_t'
- CHECK: Comparison to NULL could be written "!data"
- CHECK: line length of ... exceeds 100 columns
Signed-off-by: Benjamin Philip <benjamin.philip495@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260101141657.54258-1-benjamin.philip495@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As per Lenovo documentation, Fn+Print-Screen should "Open the Snipping
tool" which corresponds to KEY_SELECTIVE_SCREENSHOT (keycode 0x27a). It
is currently assigned to KEY_CUT because keycodes under 248 were
preferred due to X11 limitations.
Reassign Fn+Print-Screen from KEY_CUT to KEY_SELECTIVE_SCREENSHOT.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220566
Signed-off-by: Tomáš Hnyk <tomashnyk@gmail.com>
Link: https://patch.msgid.link/20251226203454.405520-1-tomashnyk@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ThinkCenter team are adding WMI certificate thumbprint support.
Updating the driver to enable it. They are using the same GUID as
Thinkpad/ThinkStation.
Tested on M75q Gen 5.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20251127202959.399040-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Legion Go 2 SKU's to the Extreme Mode quirks table.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20251127151605.1018026-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When developing the gamezone WMI drivers, "extreme mode" was matched to
the performance platform profile and "performance" was matched to the
balanced-performance platform profile, but only if extreme mode was
fully supported; otherwise performance was matched to the "performance"
platform profile. This has led to quite a bit of confusion with users
not understanding why the LED color indicating the platform profile
doesn't match their expectations.
To solve this, replace the confusing convention by using the new
max-power profile to represent "extreme mode". While add it, update the
documentation to reflect the expected LED colors in each operating mode.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20251127151605.1018026-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
