The commit 7aa7d4bf9d ("usb: typec: ucsi: Fix race condition and
ordering in port unregistration") consolidated port teardown into the
ucsi_unregister_port() helper. However, it introduced an ordering problem
in the ucsi_init() error path.
Fix this by ensuring ucsi_unregister_port() is called before we unregister
their corresponding lockdep keys.
Cc: stable@vger.kernel.org
Fixes: 7aa7d4bf9d ("usb: typec: ucsi: Fix race condition and ordering in port unregistration")
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/22064276-6c56-411a-9f20-6917ceeb865f@intel.com/
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260717104614.325250-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit e0c48e42d8 ("usb: typec: ucsi: yoga-c630: remove
duplicate AltModes").
The yoga_c630 driver previously implemented its own duplicate altmode
detection in yoga_c630_ucsi_update_altmodes() to work around buggy EC
firmware that returns duplicate AltModes instead of empty ones.
With the introduction of the common ucsi_altmode_is_duplicate() helper
in both the standard and nvidia registration paths, duplicate detection
is now handled automatically in the core UCSI code. This makes the
yoga_c630-specific implementation added in commit e0c48e42d8 ("usb:
typec: ucsi: yoga-c630: remove duplicate AltModes") redundant.
Remove yoga_c630_ucsi_update_altmodes() and its callback to eliminate
code duplication and simplify the driver. Note that this causes the
driver to switch back from the nvidia registration path to the standard
path, which is the original behavior before commit e0c48e42d8 ("usb:
typec: ucsi: yoga-c630: remove duplicate AltModes"). Both paths now
include duplicate detection, ensuring the firmware bug is still properly
handled.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20260713084323.287516-3-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the duplicate altmode detection to ucsi_register_altmodes_nvidia()
which is used when a driver provides the update_altmodes() callback.
This ensures all drivers benefit from duplicate detection, whether they
use the standard registration path or the nvidia path with update_altmodes
callback.
Without this fix, drivers using the nvidia path (like yoga_c630) would
still encounter duplicate altmode registration errors from buggy firmware.
Fixes: a79f16efcd ("usb: typec: ucsi: Add support for the partner USB Modes")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20260713084323.287516-2-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some firmware implementations incorrectly return the same altmode
multiple times at different offsets when queried via
UCSI_GET_ALTERNATE_MODES. This causes sysfs duplicate filename errors
and kernel call traces when the driver attempts to register the same
altmode twice:
sysfs: cannot create duplicate filename '/devices/.../typec/port0/port0.0/partner'
typec-thunderbolt port0-partner.1: failed to create symlinks
typec-thunderbolt port0-partner.1: probe with driver typec-thunderbolt failed with error -17
The matching rules differ by recipient:
- UCSI_RECIPIENT_CON (port) and UCSI_RECIPIENT_SOP_P (plug):
Two altmodes with identical SVID and VDO are byte-for-byte
duplicates and the second has no observable function, so drop it.
- UCSI_RECIPIENT_SOP (partner):
The typec class binds each partner altmode to a port altmode of
the same SVID via altmode_match()/device_find_child(), which
returns the first port altmode with a matching SVID. If the
partner advertises more altmodes for SVID X than the port
advertises, the surplus partner altmode(s) collapse onto an
already-paired port altmode and trigger the
"duplicate filename .../partner" sysfs error during
typec_altmode_create_links(). Use the port-side altmode count for
SVID X as the authoritative cap and reject any partner altmode
that would exceed it. This preserves legitimate multi-Mode
partner altmodes (vendor SVIDs that the port really does
advertise more than once) while filtering the firmware-generated
duplicates that have no port counterpart, and is therefore
stricter than a plain SVID+VDO comparison (which still admits the
Thunderbolt case where firmware reports the same SVID twice with
different VDOs) without being over-broad like a plain SVID match
(which would falsely drop legitimate vendor multi-Mode entries).
If a duplicate is detected, skip it and emit a clean warning instead
of generating a kernel call trace:
ucsi_acpi USBC000:00: con2: Firmware bug: duplicate partner altmode SVID 0x8087 at offset 1, ignoring.
ucsi_acpi USBC000:00: con2: VDO mismatch: 0x8087a043 vs 0x00000001
The duplicate detection logic lives in a reusable helper
ucsi_altmode_is_duplicate() and is invoked from
ucsi_register_altmodes(). It applies to all three recipient types:
partner (SOP), port (CON), and plug (SOP_P) altmodes.
Fixes: a79f16efcd ("usb: typec: ucsi: Add support for the partner USB Modes")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
unchanged: still SVID+VDO exact-dup match.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260713084323.287516-1-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port().
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Fixes: b13abcb7dd ("usb: typec: ucsi: Fix NULL pointer access")
Fixes: fac4b8633f ("usb: ucsi: Ensure connector delayed work items are flushed")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260707141736.1635698-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNSkw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynUlACgtUhZOR/MsYMcNbKJe9vk0iG35+AAnjrhznd4
OJqmb+1vVQ7xDm2fq+gz
=Ky4T
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues"
* tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: core: ratelimit cabling message
usb: misc: usbio: fix disconnect UAF in client teardown
Revert "usb: typec: mux: avoid duplicated mux switches"
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
usb: ucsi: huawei_gaokun: move typec_altmode off stack
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
usb: typec: tcpm: Fix VDM type for Enter Mode commands
usb: typec: ucsi: cancel pending work on system suspend
usb: typec: class: drop PD lookup reference
usb: typec: ps883x: Fix DP+USB3 configuration
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
xhci: sideband: fix ring sg table pages leak
usb: gadget: udc: Fix use-after-free in gadget_match_driver
usb: dwc3: run gadget disconnect from sleepable suspend context
usb: sl811-hcd: disable controller wakeup on remove
usb: typec: anx7411: use devm_pm_runtime_enable()
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
USB: misc: uss720: unregister parport on probe failure
usb: gadget: function: rndis: add length check for header
usb: gadget: function: rndis: add length check to response query
...
This reverts commit b145c3f29d.
The deduplication logic appears to cause issues with separate
SBU muxes. The mode-switch call on these (like gpio-sbu-mux)
never appeared, so no successful mode-switch happened. The more
high-end Parade PS883X redrivers are not affected due to being
retimer-switch. The revert fixes dp altmode mode-switch for both.
Tested on:
Lenovo Thinkbook 16 G7 QOY
Lenovo Ideapad 5 2in1 14Q8X9
Microsoft Windows Dev Kit 2023 (Blackrock)
Lenovo Thinkpad T14s G6
Fixes: b145c3f29d ("usb: typec: mux: avoid duplicated mux switches")
Cc: stable <stable@kernel.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260530-typc-mux-modeset-v1-1-64b0281e2cd6@oldschoolsolutions.biz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The typec_altmode structure contains a 'struct device' object
that cannot be allocated on the stack because of its size, even
when ignoring the lifetime rules:
drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c:326:13: error: stack frame size (1456) exceeds limit (1280) in 'gaokun_ucsi_usb_notify_ind' [-Werror,-Wframe-larger-than]
326 | static void gaokun_ucsi_usb_notify_ind(struct gaokun_ucsi *uec)
Since the altmode is always associated with a port here, move
it into the port object and avoid at least the stack allocation
issue.
Fixes: 1c2b66a7d7 ("usb: ucsi: huawei_gaokun: support mode switching")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://patch.msgid.link/20260618143341.1900221-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 302c570bf3 ("usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260706145312.37260-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VDO() second parameter is VDM type (bit 15): 1 for SVDM, 0 for UVDM.
Using 'vdo ? 2 : 1' corrupts SVID low bit when vdo is non-NULL
(2 << 15 = BIT(16)). Enter Mode is always SVDM, hardcode to 1.
Fixes: 8face9aa57 ("usb: typec: Add parameter for the VDO to typec_altmode_enter()")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260604105059.18750-1-andyshrk@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a Dell XPS 13 9360 (BIOS 2.21.0), entering system suspend (deep/S3)
races a pending UCSI connector-change worker against the ACPI EC teardown.
The worker evaluates the UCSI _DSM (GET_CONNECTOR_STATUS), whose AML
accesses the Embedded Controller. By that point the ACPI EC has already
been stopped for suspend, so the EC address space handler rejects the
access with AE_BAD_PARAMETER, aborting the AML and failing the connector
query:
[22314.689495] ACPI: EC: interrupt blocked
[22314.711981] ACPI: PM: Preparing to enter system sleep state S3
[22314.743260] ACPI: EC: event blocked
[22314.743265] ACPI: EC: EC stopped
[22314.743267] ACPI: PM: Saving platform NVS memory
[22314.744241] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20260408/evregion-303)
[22314.744432] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECW1 due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.744673] ACPI Error: Aborting method \ECWB due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745201] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745394] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f rev:1 func:1 (0x1001)
[22314.745414] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 1
[22314.745424] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
ucsi_acpi implements a resume callback but no suspend callback, so nothing
cancels the connector-change work before the firmware/EC is torn down.
Add a `ucsi_suspend()` core helper that cancels the pending init and
connector-change work, and wire it into ucsi_acpi's PM ops. The connector
state is re-read on resume by `ucsi_resume()`, so cancelling the work loses
nothing.
Fixes: 4e3a50293c ("usb: typec: ucsi: acpi: Implement resume callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Assisted-by: Claude Opus 4.8
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260703110738.8457-2-pmenzel@molgen.mpg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_power_delivery_find() wraps class_find_device_by_name(). That helper
returns a device reference that must be released by the caller.
select_usb_power_delivery_store() only needs this reference while calling
the pd_set callback. Drop it once the callback returns. Otherwise the sysfs
write can pin the selected USB Power Delivery object and prevent it from
being released on unregister.
Fixes: a7cff92f06 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable <stable@kernel.org>
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260702191329.2648043-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6bebd9b777 ("usb: typec: ps883x: Rework ps883x_set()") introduced
two regressions:
1. The CONN_STATUS_0_USB_3_1_CONNECTED bit is mistakenly written to the
wrong configuration register (cfg1 instead of cfg0). This breaks USB3
when using USB3+DP adapters.
2. The switch-case fallthrough block is inverted: Currently,
TYPEC_DP_STATE_C (DP-only) inherits the USB3 configuration, while
TYPEC_DP_STATE_D (DP+USB3) is missing the necessary DP sink flags.
Fix these by writing the USB3 bit to the correct register and swapping the
case statement order so both states get their correct bits assigned.
Cc: stable <stable@kernel.org>
Fixes: 6bebd9b777 ("usb: typec: ps883x: Rework ps883x_set()")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260601-ps883x-usb3dp-fixes-v1-1-d19bec3a6d26@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
anx7411_i2c_probe() enables runtime PM before returning successfully, but
anx7411_i2c_remove() tears down the Type-C partner state, workqueue, dummy
I2C device, mux, switch and port without disabling runtime PM.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
driver detach. Since devres action registration can fail, route that
failure through the existing probe unwind path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: fe6d8a9c8e ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260701114006.75738-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM
command hold the 32-bit Alternate Mode Specific (AMSpecific) field.
For DisplayPort Alternate Mode, this field must contain the full
32-bit DisplayPort configuration VDO payload that the OPM wants the
connector to operate in, rather than just the pin assignment value.
This AMSpecific value follows the DisplayPort Configurations defined
in the DisplayPort Alt Mode on USB Type-C Specification v2.1a,
Table 5-13: SOP DisplayPort Configurations.
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Madhu M <madhu.m@intel.com>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | CPU 1 (threaded IRQ)
ucsi_destroy(uc->ucsi) | ccg_irq_handler()
kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE
Move free_irq() before ucsi_destroy() in the remove path. It is kept
after ucsi_unregister(): ucsi_unregister() cancels connector work whose
handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(),
which waits for a completion that is signalled from the IRQ handler, so
the IRQ must stay active until that work has been cancelled.
The probe error path already orders free_irq() before ucsi_destroy().
This bug was found by static analysis.
Fixes: e32fd989ac ("usb: typec: ucsi: ccg: Move to the new API")
Cc: stable <stable@kernel.org>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260616132011.103279-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes().
Assisted-by: Antigravity:gemini-3.5-flash
Fixes: 4ab8c18d4d ("usb: typec: Register a device for every mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260622220803.305750-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing implementation assigned these flags backwards, configuring
the partner's DisplayPort role to match the port's role instead of
complementing it.
This prevents proper configuration during DP altmode activation, often
causing `pin_assignment` to remain 0 in `dp_altmode_configure()` and
resulting in VDM negotiation failures:
[ 583.328246] typec port1.1: VDM 0xff01a150 failed
Additionally, the fix ensures that the `pin_assignment` sysfs attribute
displays the correct values.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260601142837.3240207-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB PHY (QMP Combo PHY) is always initialized in USB3+DP mode. In
the past, there was no MUX, and it was unnecessary to set it, since
MSM only supported 2-lane DP. But now, MST and 4-lane DP support has
been added to MSM, and a MUX has been added to the PHY. To support
4-lane DP and mode switching for gaokun, get the MUX and set it.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260607101844.820064-1-mitltlatltl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into usb-next
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add debugfs entry for writing message_out data structure to handle
UCSI 2.1 and 3.0 commands through debugfs interface.
Users writing to the message_out debugfs file should ensure the input
data adheres to the following format:
1. Input must be a non-empty valid hexadecimal string.
2. Input length of hexadecimal string must not exceed 256 bytes of
length to be in alignment with the message out data structure size
as per the UCSI specification v2.1.
3. If the input string length is odd, then user needs to prepend a
'0' to the first character for proper hex conversion.
Below are examples of valid hex strings. Note that these values are
just examples. The exact values depend on specific command use case.
#echo 1A2B3C4D > message_out
#echo 01234567 > message_out
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/812820ed3caae2d9ab86e4b26022c5a36b645f86.1778798352.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for UCSI message_out data structure. The UCSI
interface defines separate message_in and message_out data
structure for bidirectional communication, where commands
like Set PDOs and LPM Firmware Update require writing data
to message_out before command execution.
Add write_message_out operation to ucsi_operations structure
to allow platform drivers to implement message_out data writing
capability.
Update ucsi_sync_control_common to accept message_out parameters
and call write_message_out followed by command execution to
maintain proper sequencing as per the UCSI specification.
Introduce ucsi_write_message_out_command for commands that need
to send message_out data, while maintaining ucsi_send_command
for commands that only require message_in response data.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/6d4e1ba7f92e713638f66925ae6389528597df6e.1778798352.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current way of specifying VBUS supply (via the device's vdd-vbus-supply
property) is not ideal. In the end, VBUS is supplied to the USB-C
connector rather than the Type-C block in the PMIC. Follow the standard
way of specifying it (via the connector node) and fallback to the old
property if there is no vbus-supply in the connector node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519-fix-tcpm-vbus-v1-2-14754695282d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike other units in this module, this one does not request interrupts
or regulator supplies. It does not use OF graph, USB role switching or
TypeC muxing APIs. Drop redundant header includes to speed up
preprocessor.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519100014.282058-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lockdep detects a possible recursive locking scenario during
ucsi init:
[ 5.418616] ============================================
[ 5.418634] WARNING: possible recursive locking detected
[ 5.418706] --------------------------------------------
[ 5.418725] kworker/4:1/82 is trying to acquire lock:
[ 5.418759] ffff888119a34648 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418801]
but task is already holding lock:
[ 5.418835] ffff888119a34080 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418884]
other info that might help us debug this:
[ 5.418904] Possible unsafe locking scenario:
[ 5.418937] CPU0
[ 5.418956] ----
[ 5.418991] lock(&con->lock);
[ 5.419013] lock(&con->lock);
[ 5.419033]
*** DEADLOCK ***
[ 5.419387] Call Trace:
[ 5.419406] <TASK>
[ 5.419425] dump_stack_lvl+0x61/0xa0
[ 5.419448] print_deadlock_bug+0x4a6/0x650
[ 5.419483] __lock_acquire+0x62b6/0x7f50
[ 5.419507] lock_acquire+0x11b/0x390
[ 5.419654] __mutex_lock+0xbc/0xcd0
[ 5.419741] ucsi_init_work+0x1a78/0x2eb0
[ 5.419785] ? worker_thread+0xf53/0x2bc0
[ 5.419819] worker_thread+0xff4/0x2bc0
[ 5.419842] kthread+0x2a7/0x330
[ 5.419863] ? __pfx_worker_thread+0x10/0x10
[ 5.419896] ? __pfx_kthread+0x10/0x10
[ 5.419916] ret_from_fork+0x38/0x70
[ 5.419936] ? __pfx_kthread+0x10/0x10
[ 5.419969] ret_from_fork_asm+0x1b/0x30
[ 5.419991] </TASK>
[ 5.420009] ---[ end trace 0000000000000000 ]---
The problem is that all connector locks belong to the same
lockdep lock class, so the following loop:
for (i = 0; i < ucsi->cap.num_connectors; i++)
ucsi_register_port(connector[i])
mutex_lock(&connector[i]->lock)
looks like a recursive acquire of the same mutex. Put each connector
lock into a dedicated lock class so that lockdep doesn't see it as a
possible recursion.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260515060042.136083-1-senozhatsky@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/usb/typec/mux/intel_pmc_mux.c:740:3: error: variable 'num_ports' is uninitialized when used here [-Werror,-Wuninitialized]
740 | num_ports++;
| ^~~~~~~~~
This should have been initialized to zero. Do so now to clean up the
warning and ensure num_ports does not use uninitialized memory.
Fixes: 8bdb0b3830 ("usb: typec: intel_pmc_mux: combine kzalloc + kcalloc")
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/177793914437.2560.9287713196857718000@997d03828cfd/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260506-typec-intel_pmc_mux-fix-uninit-num_ports-v1-1-929b128a32e9@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We only need to update the power_supply on power role change if the port
is connected, because otherwise the online status should be the same for
both cases.
Cc: stable <stable@kernel.org>
Fixes: 7616f006db ("usb: typec: ucsi: Update power_supply on power role change")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-2-6f1239535187@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UGREEN USB-C Multifunction Adapter Model CM512 (AKA "Revodok 107")
exposes two SVIDs: 0xff01 (DP Alt Mode) and 0x1d5c. The DISCOVER_MODES
step succeeds for 0xff01 and gets a NAK for 0x1d5c. Currently this
results in DP Alt Mode not being registered either, since the modes
are only registered once all of them have been discovered. The NAK
results in the processing being stopped and thus no Alt modes being
registered.
Improve the situation by handling the NAK gracefully and continue
processing the other modes.
Before this change, the TCPM log ends like this:
(more log entries before this)
[ 5.028287] AMS DISCOVER_SVIDS finished
[ 5.028291] cc:=4
[ 5.040040] SVID 1: 0xff01
[ 5.040054] SVID 2: 0x1d5c
[ 5.040082] AMS DISCOVER_MODES start
[ 5.040096] PD TX, header: 0x1b6f
[ 5.050946] PD TX complete, status: 0
[ 5.059609] PD RX, header: 0x264f [1]
[ 5.059626] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[ 5.059640] AMS DISCOVER_MODES finished
[ 5.059644] cc:=4
[ 5.069994] Alternate mode 0: SVID 0xff01, VDO 1: 0x000c0045
[ 5.070029] AMS DISCOVER_MODES start
[ 5.070043] PD TX, header: 0x1d6f
[ 5.081139] PD TX complete, status: 0
[ 5.087498] PD RX, header: 0x184f [1]
[ 5.087515] Rx VDM cmd 0x1d5c8083 type 2 cmd 3 len 1
[ 5.087529] AMS DISCOVER_MODES finished
[ 5.087534] cc:=4
(no further log entries after this point)
After this patch the TCPM log looks exactly the same, but then
continues like this:
[ 5.100222] Skip SVID 0x1d5c (failed to discover mode)
[ 5.101699] AMS DFP_TO_UFP_ENTER_MODE start
(log goes on as the system initializes DP AltMode)
Cc: stable <stable@kernel.org>
Fixes: 41d9d75344 ("usb: typec: tcpm: add discover svids and discover modes support for sop'")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260429-tcpm-discover-modes-nak-fix-v4-1-75945d0ed30f@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260518110142.637215-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-7-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If devm_drm_dp_hpd_bridge_add() fails during fusb302_probe(), the original
code returned directly without cleaning up the resources.
Move bridge registration before the IRQ is requested and route bridge
registration failures through the existing TCPM unregister and fwnode
cleanup path.
Fixes: 5d79c52540 ("usb: typec: fusb302: add DRM DP HPD bridge support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260428-fusb-v2-1-aa3b5942cabb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM. ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.
Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Jameson Thies <jthies@google.com>
Cc: Nathan Rebello <nathan.c.rebello@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/2026051351-truck-steadfast-df48@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first
payload VDO from data[], but unlike the equivalent handler in
altmodes/displayport.c it does not check that count covers a VDO beyond
the header. A header-only Configure VDM (count == 1) would read one u32
past the caller's array.
In the normal UCSI path the caller controls count, so this is hardening
for non-standard delivery paths. NAK and bail when no configuration VDO
is present, matching the generic DP altmode driver's existing guard.
Assisted-by: gkh_clanker_t1000
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051351-vividly-flattered-eb3d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached.
Assisted-by: gkh_clanker_t1000
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051351-reshuffle-skillful-90af@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/2026051350-plated-salute-0efe@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A broken/malicious port can transmit a CRC-valid frame whose header
advertises up to seven data objects but whose body carries fewer than
that. Check for this, and rightfully reject the message, instead of
reading from uninitialized stack memory.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Amit Sunil Dhamne <amitsd@google.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051350-sitter-canopener-9045@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051350-reacquire-sculpture-4244@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051347-clustered-deflected-9543@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026051405-posture-shrill-7884@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the error code on these two error paths. The existing code returns
success.
Fixes: 77ed2f4538 ("usb: typec: tipd: Use read_power_status function in probe")
Fixes: 04041fd7d6 ("usb: typec: tipd: Read data status in probe and cache its value")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/agL9o7wUK1dOVBTy@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoA87keHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsnAIAJENovWOPJnq6XOM
GcnwSFG+xsv5kfSXU9+ZgP2WnoHJGoWCon2T69+dyVrthmMxFcPub1UM+VI0M+LP
Eo894JhbAlpej4Z0f6I4L6eE9RMq2vc3UW3ga1WK6R9IYJ3WE1kEur64zJJoBvX1
SPj4oxpI/S02KxLT8F2Sq5PVS4lvaDwK/N2mTB5JNjZE24iUMYc/4nPFNFpVKhgb
qfpMOk4VGjfgRexVksskm8pVO6FAWXUMQTGUUYSpzv5f2avGAyP8o+m3dHIs366+
Y/xVLADTtW7z4pu3eTw5hZLhbTekElFfLTsSPqWwqCiu0zA5s3HjRHMo3xbhHkwT
0zXS2H0=
=j7EH
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc3' into usb-next
We need the USB fixes in here as well to test and work off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A flexible array member can be used to combine allocations and simplify
handling slightly.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260425014201.439251-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there's nothing going through the retimer, there's no reason to
keep it online. Put it in reset when possible to save power.
Also, remove the register cache-compare optimization as it makes little
sense now that the chip resets during almost all transitions and
tracking the validity of that cache becomes a headache.
Suggested-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://patch.msgid.link/20260420-topic-ps883x_unused_reset-v1-1-7aabf7004d2a@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port in debug accessory mode can be either a source or sink. The
previous tcpm_port_is_debug() function only checked for source port.
Commit 8db73e6a42 ("usb: typec: tcpm: allow sink (ufp) to toggle into
accessory mode debug") changed the detection logic to support both roles,
but left some logic in _tcpm_cc_change() unchanged, This causes the state
machine to transition to an incorrect state when operating as a sink in
debug accessory mode. Log as below:
[ 978.637541] CC1: 0 -> 5, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 978.637567] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 978.637596] pending state change SRC_ATTACH_WAIT -> DEBUG_ACC_ATTACHED @ 180 ms [rev1 NONE_AMS]
[ 978.647098] CC1: 5 -> 0, CC2: 5 -> 5 [state SRC_ATTACH_WAIT, polarity 0, connected]
[ 978.647115] state change SRC_ATTACH_WAIT -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
It should go to SNK_ATTACH_WAIT instead of SRC_ATTACH_WAIT state.
To fix this, add tcpm_port_is_debug_source() and tcpm_port_is_debug_sink()
helper to explicitly identify the power mode in debug accessory mode.
Update the state transition logic in _tcpm_cc_change() to ensure the state
machine transitions comply with Type-C specification. Also update the logic
in run_state_machine() to keep consistency.
Fixes: 8db73e6a42 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://patch.msgid.link/20260424074009.2979266-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
