Move all temporary state of the font-rotation code into the struct
rotated in struct fbcon_par. Protect it with the Kconfig symbol
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION. Avoids mixing it up with fbcon's
regular state.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Move the core of fbcon's font-rotation code to the font library as
the new helper font_data_rotate(). The code can rotate in steps of
90°. For completeness, it also copies the glyph data for multiples
of 360°.
Bring back the memset optimization. A memset to 0 again clears the
whole glyph output buffer. Then use the internal rotation helpers on
the cleared output. Fbcon's original implementation worked like this,
but lost it during refactoring.
Replace fbcon's font-rotation code with the new implementations.
All that's left to do for fbcon is to maintain its internal fbcon
state.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Move the glyph rotation helpers from fbcon to the font library. Wrap them
behind clean interfaces. Also clear the output memory to zero. Previously,
the implementation relied on the caller to do that.
Go through the fbcon code and callers of the glyph-rotation helpers. In
addition to the font rotation, there's also the cursor code, which uses
the rotation helpers.
The font-rotation relied on a single memset to zero for the whole font.
This is now multiple memsets on each glyph. This will be sorted out when
the font library also implements font rotation.
Building glyph rotation in the font library still depends on
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y. If we get more users of the code,
we can still add a dedicated Kconfig symbol to the font library.
No changes have been made to the actual implementation of the rotate_*()
and pattern_*() functions. These will be refactored as separate changes.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Implement pitch and size calculation for a single font glyph in the
new helpers font_glyph_pitch() and font_glyph_size(). Replace the
instances where the calculations are open-coded.
Note that in the case of fbcon console rotation, the parameters for
a glyph's width and height might be reversed. This is intentional.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6cc50e1c5b ("[PATCH] fbcon: Console Rotation - Add support to rotate font bitmap")
Cc: stable@vger.kernel.org # v2.6.15+
Link: https://elixir.bootlin.com/linux/v6.19/source/drivers/video/fbdev/core/fbcon_ccw.c#L144 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
Support for console rotation is somewhat bolted onto the helper
fbcon_set_bitops() for unrotated displays.
Update fbcon_set_bitops() with a switch statement that picks the
correct settings helper for the current rotation. For unrotated
consoles, set the bitops for in the new helper fbcon_set_bitops_ur().
Rename the other, existing helpers to match the common naming
scheme.
The old helper fbcon_set_rotate() is no longer used.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-6-tzimmermann@suse.de
The field struct fbcon_par.rotate_font points to fbcon_rotate_font() if
the console is rotated. Set the callback in the same place as the other
callbacks. Prepares for declaring all fbcon callbacks in a dedicated
struct type.
If not rotated, fbcon_set_bitops() still clears the callback to NULL.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-4-tzimmermann@suse.de
The type struct fbcon_ops contains fbcon state and callbacks. As the
callbacks will be removed from struct fbcon_ops, rename the data type
to struct fbcon_par. Also rename the variables from ops to par.
The _par postfix ("private access registers") is used throughout the
fbdev subsystem for per-driver state. The fbcon pointer within struct
fb_info is also named fbcon_par. Hence, the new naming fits existing
practice.
v2:
- rename struct fbcon_ops to struct fbcon_par
- fix build for CONFIG_FB_TILEBITTING=n (kernel test robot)
- fix indention
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-3-tzimmermann@suse.de
Every since
commit 6104c37094
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Aug 1 17:32:07 2017 +0200
fbcon: Make fbcon a built-time depency for fbdev
these are no longer distinct loadable modules, so exporting symbols is
kinda pointless.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Helge Deller <deller@gmx.de>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029101428.4058311-2-daniel.vetter@ffwll.ch
For user-provided fonts, the framebuffer layer is using a magic
negative-indexing macro, FNTCHARCNT(), to keep track of their number of
characters:
#define FNTCHARCNT(fd) (((int *)(fd))[-3])
For built-in fonts, it is using hard-coded values (256). This results in
something like the following:
map.length = (ops->p->userfont) ?
FNTCHARCNT(ops->p->fontdata) : 256;
This is unsatisfactory. In fact, there is already a `charcount` field in
our virtual console descriptor (see `struct console_font` inside `struct
vc_data`), let us use it:
map.length = vc->vc_font.charcount;
Recently we added a `charcount` field to `struct font_desc`. Use it to set
`vc->vc_font.charcount` properly. The idea is:
- We only use FNTCHARCNT() on `vc->vc_font.data` and `p->fontdata`.
Assume FNTCHARCNT() is working as intended;
- Whenever `vc->vc_font.data` is set, also set `vc->vc_font.charcount`
properly;
- We can now replace `FNTCHARCNT(vc->vc_font.data)` with
`vc->vc_font.charcount`;
- Since `p->fontdata` always point to the same font data buffer with
`vc->vc_font.data`, we can also replace `FNTCHARCNT(p->fontdata)` with
`vc->vc_font.charcount`.
In conclusion, set `vc->vc_font.charcount` properly in fbcon_startup(),
fbcon_init(), fbcon_set_disp() and fbcon_do_set_font(), then replace
FNTCHARCNT() with `vc->vc_font.charcount`. No more if-else between
negative-indexing macros and hard-coded values.
Do not include <linux/font.h> in fbcon_rotate.c and tileblit.c, since they
no longer need it.
Depends on patch "Fonts: Add charcount field to font_desc".
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e460a5780e54e3022661d5f09555144583b4cc59.1605169912.git.yepeilin.cs@gmail.com
drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros
from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all
definitions into <linux/font.h>.
Since newport_con now uses four extra words, initialize the fourth word in
newport_set_font() properly.
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com
There's a bunch of folks who're trying to make printk less
contended and faster, but there's a problem: printk uses the
console_lock, and the console lock has become the BKL for all things
fbdev/fbcon, which in turn pulled in half the drm subsystem under that
lock. That's awkward.
There reasons for that is probably just a historical accident:
- fbcon is a runtime option of fbdev, i.e. at runtime you can pick
whether your fbdev driver instances are used as kernel consoles.
Unfortunately this wasn't implemented with some module option, but
through some module loading magic: As long as you don't load
fbcon.ko, there's no fbdev console support, but loading it (in any
order wrt fbdev drivers) will create console instances for all fbdev
drivers.
- This was implemented through a notifier chain. fbcon.ko enumerates
all fbdev instances at load time and also registers itself as
listener in the fbdev notifier. The fbdev core tries to register new
fbdev instances with fbcon using the notifier.
- On top of that the modifier chain is also used at runtime by the
fbdev subsystem to e.g. control backlights for panels.
- The problem is that the notifier puts a mutex locking context
between fbdev and fbcon, which mixes up the locking contexts for
both the runtime usage and the register time usage to notify fbcon.
And at runtime fbcon (through the fbdev core) might call into the
notifier from a printk critical section while console_lock is held.
- This means console_lock must be an outer lock for the entire fbdev
subsystem, which also means it must be acquired when registering a
new framebuffer driver as the outermost lock since we might call
into fbcon (through the notifier) which would result in a locking
inversion if fbcon would acquire the console_lock from its notifier
callback (which it needs to register the console).
- console_lock can be held anywhere, since printk can be called
anywhere, and through the above story, plus drm/kms being an fbdev
driver, we pull in a shocking amount of locking hiercharchy
underneath the console_lock. Which makes cleaning up printk really
hard (not even splitting console_lock into an rwsem is all that
useful due to this).
There's various ways to address this, but the cleanest would be to
make fbcon a compile-time option, where fbdev directly calls the fbcon
register functions from register_framebuffer, or dummy static inline
versions if fbcon is disabled. Maybe augmented with a runtime knob to
disable fbcon, if that's needed (for debugging perhaps).
But this could break some users who rely on the magic "loading
fbcon.ko enables/disables fbdev framebuffers at runtime" thing, even
if that's unlikely. Hence we must be careful:
1. Create a compile-time dependency between fbcon and fbdev in the
least minimal way. This is what this patch does.
2. Wait at least 1 year to give possible users time to scream about
how we broke their setup. Unlikely, since all distros make fbcon
compile-in, and embedded platforms only compile stuff they know they
need anyway. But still.
3. Convert the notifier to direct functions calls, with dummy static
inlines if fbcon is disabled. We'll still need the fb notifier for the
other uses (like backlights), but we can probably move it into the fb
core (atm it must be built-into vmlinux).
4. Push console_lock down the call-chain, until it is down in
console_register again.
5. Finally start to clean up and rework the printk/console locking.
For context of this saga see
commit 50e244cc79
Author: Alan Cox <alan@linux.intel.com>
Date: Fri Jan 25 10:28:15 2013 +1000
fb: rework locking to fix lock ordering on takeover
plus the pile of commits on top that tried to make this all work
without terminally upsetting lockdep. We've uncovered all this when
console_lock lockdep annotations where added in
commit daee779718
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Sep 22 19:52:11 2012 +0200
console: implement lockdep support for console_lock
On the patch itself:
- Switch CONFIG_FRAMEBUFFER_CONSOLE to be a boolean, using the overall
CONFIG_FB tristate to decided whether it should be a module or
built-in.
- At first I thought I could force the build depency with just a dummy
symbol that fbcon.ko exports and fb.ko uses. But that leads to a
module depency cycle (it works fine when built-in).
Since this tight binding is the entire goal the simplest solution is
to move all the fbcon modules (and there's a bunch of optinal
source-files which are each modules of their own, for no good
reason) into the overall fb.ko core module. That's a bit more than
what I would have liked to do in this patch, but oh well.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:32:07 +02:00
Renamed from drivers/video/console/fbcon_rotate.c (Browse further)