Introduce vendor-specific PHY tunable identifiers to control the
KSZ87xx low-loss cable erratum handling through the ethtool PHY
tunable interface.
The following tunables are added:
- a boolean "short-cable" tunable, applying a documented and
conservative preset intended for short or low-loss Ethernet cables;
- an integer LPF bandwidth tunable, allowing advanced adjustment of the
receiver low-pass filter bandwidth;
- an integer DSP EQ initial value tunable, allowing advanced tuning of
the PHY equalizer initialization.
The actual behavior is implemented by the corresponding PHY and switch
drivers.
Reviewed-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes: 655f8919d5 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When compile testing the UAPI headers with clang, there is an warning turned
error for using a C++ style ('//') comment, which is explicitly forbidden for
UAPI headers.
In file included from <built-in>:1:
./usr/include/linux/virtio_can.h:29:35: error: // comments are not allowed in this language [-Werror,-Wcomment]
29 | #define VIRTIO_CAN_MAX_DLEN 64 // this is like CANFD_MAX_DLEN
| ^
1 error generated.
Switch to a standard C style comment.
Fixes: 2b6b4bb7d96f ("can: virtio: Add virtio CAN driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260604-virtio_can-fix-uapi-comment-v1-1-199fa96ec5f0@kernel.org>
Add virtio CAN driver based on Virtio 1.4 specification (see
https://github.com/oasis-tcs/virtio-spec/tree/virtio-1.4). The driver
implements a complete CAN bus interface over Virtio transport,
supporting both CAN Classic and CAN-FD Ids. In term of frames, it
supports classic and CAN FD. RTR frames are only supported with classic
CAN.
Usage:
- "ip link set up can0" - start controller
- "ip link set down can0" - stop controller
- "candump can0" - receive frames
- "cansend can0 123#DEADBEEF" - send frames
Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Co-developed-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Signed-off-by: Mikhail Golubev-Ciuchea <mikhail.golubev-ciuchea@oss.qualcomm.com>
Co-developed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Damir Shaikhutdinov <Damir.Shaikhutdinov@opensynergy.com>
Reviewed-by: Francesco Valla <francesco@valla.it>
Tested-by: Francesco Valla <francesco@valla.it>
Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <ahXNb+KzuHYbS24+@fedora>
There is a spelling mistake in a struct description. Fix it.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260418-virtio-typo-v1-1-0df6f943a79d@ethancedwards.com>
When a filesystem is exported to NFS clients, NFSv4 state
(opens, locks, delegations, layouts) holds references that
prevent the underlying filesystem from being unmounted.
NFSD_CMD_UNLOCK_FILESYSTEM addresses this at superblock
granularity, but administrators unexporting a single path on a
shared filesystem (e.g., one of several exports on the same device)
need finer control.
Add NFSD_CMD_UNLOCK_EXPORT, which revokes NFSv4 state acquired
through exports of a specific path. Matching is by path identity
(dentry + vfsmount) via the sc_export field on each nfs4_stid,
so multiple svc_export objects for the same path -- one per
auth_domain -- are handled correctly without requiring the caller
to name a specific client.
The command takes a single "path" attribute. Userspace (exportfs
-u) sends this after removing the last client for a given path,
enabling the underlying filesystem to be unmounted. When multiple
clients share an export path, individual unexports do not trigger
state revocation; only the final one does.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add NFSD_CMD_UNLOCK_FILESYSTEM as a dedicated netlink command for
revoking NFS state under a filesystem path, providing a netlink
equivalent of /proc/fs/nfsd/unlock_fs.
The command requires a "path" string attribute containing the
filesystem path whose state should be released. The handler
resolves the path to its superblock, then cancels async copies,
releases NLM locks, and revokes NFSv4 state on that superblock.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The existing write_unlock_ip procfs interface releases NLM file
locks held by a specific client IP address, but procfs provides
no structured way to extend that operation to other scopes such as
revoking NFSv4 state.
Add NFSD_CMD_UNLOCK_IP as a dedicated netlink command for
releasing NLM locks by client address. The command accepts a
binary sockaddr_in or sockaddr_in6 in its address attribute.
The handler validates the address family and length, then calls
nlmsvc_unlock_all_by_ip() to release matching NLM locks. Because
lockd is a single global instance, that call operates across
all network namespaces regardless of which namespace the caller
inhabits.
A separate netlink command for filesystem-scoped unlock is added in
a subsequent commit.
The nfsd_ctl_unlock_ip tracepoint is updated from string-based
address logging to __sockaddr, which stores the binary sockaddr
and formats it with %pISpc. This affects both the new netlink path
and the existing procfs write_unlock_ip path, giving consistent
structured output in both cases.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add KVM_CAP_S390_HPAGE_2G to signal to userspace that 2G hugepages may
be used to back the guest; restrictions apply similar to 1M hugepages.
Enable the (for now still ignored) GMAP_FLAG_ALLOW_HPAGE_2G flag for
the guest gmap, and propagate / disable it as necessary.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260609150930.665370-3-imbrenda@linux.ibm.com>
Because LLC wasn't complicated/annoying enough, there's 2 more
"ethertypes" being used for it:
- 0x8870 is pretty "normal", it got standardized in
802.1AC-2016/Cor1-2018 for transporting LLC frames > 1500 bytes.
It simply replaces the length value (which is no longer encoded, and
must now be derived from the packet.) The actual value dates back to
2001; https://datatracker.ietf.org/doc/html/draft-ietf-isis-ext-eth-01
(it was used without "proper" standardization for a long time)
- 0x00fe is a doozy - actually "invalid" depending on how you look at
it; it's used in GRE (and possibly GENEVE) tunnels to transport the
IS-IS routing protocol. https://seclists.org/tcpdump/2002/q4/61 is
the best/oldest source I could find. It's inspired by the 0xfe SAP
value, a GRE packet with protocol 0x00fe is followed by a payload "as
if" it was Ethernet with "<length> 0xfe 0xfe 0x03". (Again the length
isn't encoded explicitly anymore.)
The 0x00fe value is quite close to other values the kernel is using
internally for various things (after all they "won't clash for 1500
types"). Except this one does clash, and if someone unknowingly starts
using it for something internal... we end up in a world of pain in
getting IS-IS running on GRE tunnels. Hence the "WARNING".
Signed-off-by: David 'equinox' Lamparter <equinox@diac24.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260605164144.81184-1-equinox@diac24.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann:
- tp_meter: initialize last_recv_time during init
- convert cancellation of work items to disable helper
- clean up wifi detection cache (3 patches)
- clean up kernel-doc: corrections, reword, typos (6 patches)
-----BEGIN PGP SIGNATURE-----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=7tLs
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches, all by
Sven Eckelmann:
- tp_meter: initialize last_recv_time during init
- convert cancellation of work items to disable helper
- clean up wifi detection cache (3 patches)
- clean up kernel-doc: corrections, reword, typos (6 patches)
* tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv:
batman-adv: fix kernel-doc typos and grammar errors
batman-adv: fix batadv_v_ogm_packet_recv error handling kernel-doc
batman-adv: uapi: keep kernel-doc in struct member order
batman-adv: bla: update stale kernel-doc
batman-adv: tp_meter: update stale kernel-doc after refactoring
batman-adv: correct batadv_wifi_* kernel-doc
batman-adv: document cleanup of batadv_wifi_net_devices entries
batman-adv: use GFP_KERNEL allocations for the wifi detection cache
batman-adv: drop duplicated wifi_flags assignments
batman-adv: convert cancellation of work items to disable helper
batman-adv: tp_meter: initialize last_recv_time during init
====================
Link: https://patch.msgid.link/20260605072005.490368-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add comments similar to those in include/linux/watchdog.h
so that the reader/user doesn't have to dig into the API documentation
files for this.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a new unprivileged BTRFS_IOC_GET_CSUMS ioctl, which can be used to
query the on-disk csums for a file range.
The ioctl is deliberately per-file rather than exposing raw csum tree
lookups, to avoid leaking information to users about files they may not
have access to.
This is done by userspace passing a struct btrfs_ioctl_get_csums_args to
the kernel, which details the offset and length we're interested in, and
a buffer for the kernel to write its results into. The kernel writes a
struct btrfs_ioctl_get_csums_entry into the buffer, followed by the
csums if available. The maximum size of the user buffer is capped to
16MiB.
If the extent is an uncompressed, non-NODATASUM extent, the kernel sets
the entry type to BTRFS_GET_CSUMS_HAS_CSUMS and follows it with the
csums. If it is sparse, preallocated, or beyond the EOF, it sets the
type to BTRFS_GET_CSUMS_ZEROED - this is so userspace knows it can use
the precomputed hash of the zero sector. Otherwise, it sets the type to
BTRFS_GET_CSUMS_NODATASUM, BTRFS_GET_CSUMS_COMPRESSED,
BTRFS_GET_CSUM_ENCRYPTED, or BTRFS_GET_CSUM_INLINE.
For example, a file with a [0, 4K) hole and [4K, 12K) data extent would
produce the following output buffer:
| [0, 4K) ZEROED | [4K, 12K) HAS_CSUMS | csum data |
We do store the csums of compressed extents, but we deliberately don't
return them here: they're calculated over the compressed data, not the
uncompressed data that's returned to userspace. Similarly for encrypted
data, once encryption is supported, in which the csums will be on the
ciphertext.
The main use case for this is for speeding up mkfs.btrfs --rootdir. For
the case when the source FS is btrfs and using the same csum algorithm,
we can avoid having to recalculate the csums - in my synthetic
benchmarks (16GB file on a spinning-rust drive), this resulted in a ~11%
speed-up (218s to 196s).
When using the --reflink option added in btrfs-progs v6.16.1, we can forgo
reading the data entirely, resulting a ~2200% speed-up on the same test
(128s to 6s).
# mkdir rootdir
# dd if=/dev/urandom of=rootdir/file bs=4096 count=4194304
(without ioctl)
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir testimg
...
real 3m37.965s
user 0m5.496s
sys 0m6.125s
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir --reflink testimg
...
real 2m8.342s
user 0m5.472s
sys 0m1.667s
(with ioctl)
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir testimg
...
real 3m15.865s
user 0m4.258s
sys 0m6.261s
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir --reflink testimg
...
real 0m5.847s
user 0m2.899s
sys 0m0.097s
Another notable use case is for deduplication, where reading the
checksums may serve as a hint instead of reading the whole file data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding support to use session attachment with tracing_multi link.
Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows
the BPF_TRACE_FSESSION behaviour but on the tracing_multi link.
Such program is called on entry and exit of the attached function
and allows to pass cookie value from entry to exit execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support to specify cookies for tracing_multi link.
Cookies are provided in array where each value is paired with provided
BTF ID value with the same array index.
Such cookie can be retrieved by bpf program with bpf_get_attach_cookie
helper call.
We need to sort cookies array together with ids array in check_dup_ids,
to keep the id->cookie relation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new link to allow to attach program to multiple function
BTF IDs. The link is represented by struct bpf_tracing_multi_link.
To configure the link, new fields are added to bpf_attr::link_create
to pass array of BTF IDs;
struct {
__aligned_u64 ids;
__u32 cnt;
} tracing_multi;
Each BTF ID represents function (BTF_KIND_FUNC) that the link will
attach bpf program to.
We use previously added bpf_trampoline_multi_attach/detach functions
to attach/detach the link.
The linkinfo/fdinfo callbacks will be implemented in following changes.
Note this is supported only for archs (x86_64) with ftrace direct and
have single ops support.
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS &&
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS
Note using sort_r (instead of plain sort) in check_dup_ids, because we
will use the swap callback in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new program attach types multi tracing attachment:
BPF_TRACE_FENTRY_MULTI
BPF_TRACE_FEXIT_MULTI
and their base support in verifier code.
Programs with such attach type will use specific link attachment
interface coming in following changes.
This was suggested by Andrii some (long) time ago and turned out
to be easier than having special program flag for that.
Bpf programs with such types have 'bpf_multi_func' function set as
their attach_btf_id and keep module reference when it's specified
by attach_prog_fd.
They are also accepted as sleepable programs during verification,
and the real validation for specific BTF_IDs/functions will happen
during the multi link attachment in following changes.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Since there're 4 bytes padding at the end of struct bpf_prog_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_prog_info ./vmlinux
struct bpf_prog_info {
...
__u32 attach_btf_obj_id; /* 220 4 */
__u32 attach_btf_id; /* 224 4 */
/* size: 232, cachelines: 4, members: 38 */
/* sum members: 224 */
/* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */
/* padding: 4 */
/* forced alignments: 9 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_prog_info, attach_btf_id).
And, add "__u32 :32" to the tail of struct bpf_prog_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes: aba64c7da9 ("bpf: Add verified_insns to bpf_prog_info and fdinfo")
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260605155249.20772-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a CXL DVSEC-based readiness check for Blackwell-Next GPUs alongside
the existing legacy BAR0 polling path. The CXL Device DVSEC offset is
discovered at probe time. Probe, fault and read/write paths then branch
on that to use either the legacy BAR0 polling or the CXL DVSEC polling.
The CXL path polls Memory_Active, requiring MEM_INFO_VALID within 1s and
MEM_ACTIVE within Memory_Active_Timeout (up to 256s) as per CXL spec r4.0
sec 8.1.3.8.2. Given the long worst-case wait, the CXL poll runs outside
memory_lock with only a quick readiness check is done under the lock.
The poll loops sleep with schedule_timeout_killable() and return -EINTR
on a fatal signal. This avoids hung-task panics during the long
uninterruptible wait. Extend this to the legacy based wait as well for
improvement.
In the fault handler the wait runs locklessly before memory_lock. If a
reset races in, the in-lock recheck returns -EAGAIN and the wait is
retried rather than returning a spurious VM_FAULT_SIGBUS.
Add PCI_DVSEC_CXL_MEM_ACTIVE_TIMEOUT to pci_regs.h for the timeout field.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260602063015.3915-1-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Use rhashtable_lookup_likely() for lookups, rhashtable_remove_fast()
for deletes, and rhashtable_lookup_get_insert_fast() for inserts.
Updates modify values in place under RCU rather than allocating a
new element and swapping the pointer (as regular htab does). This
trades read consistency for performance: concurrent readers may
see partial updates. BPF_F_LOCK support and special-field
handling (timers, kptrs, etc.) follow in a later commit.
Initialize rhashtable with bpf_mem_alloc element cache. Require
BPF_F_NO_PREALLOC. Limit max_entries to 2^31. Free elements via
rhashtable_free_and_destroy().
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260605-rhash-v7-4-5b8e05f8630d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The order of the members of struct batadv_coded_packet and struct
batadv_unicast_tvlv_packet didn't match the kernel doc. This is the case
for all other structures and should also be done the same way for these
two.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Add a new netlink method to migrate a single xfrm_state.
Unlike the existing migration mechanism (SA + policy), this
supports migrating only the SA and allows changing the reqid.
The SA is looked up via xfrm_usersa_id, which uniquely
identifies it, so old_saddr is not needed. old_daddr is carried in
xfrm_usersa_id.daddr.
The reqid is invariant in the old migration.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6,
to allow specifying a local IPv4/IPv6 address for the backend UDP
socket.
By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA)
is enabled, both IPv4 and IPv6 sockets are created. However, if a
source address is specified via the new attributes, only a single
socket corresponding to that specific address family is created.
Accordingly, geneve_find_sock() and geneve_find_dev() are updated to
take the source address into account, ensuring that multiple devices
and sockets configured with different source addresses can coexist
without conflict.
In addition, the source address is validated in geneve_xmit_skb()
and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key.
With this change, multiple GENEVE devices can be successfully created
and bound to their respective local IP addresses:
(*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6
# for i in $(seq 1 2);
do
ip link add geneve4_${i} type geneve local 192.168.0.${i} external
ip addr add 192.168.0.${i}/24 dev geneve4_${i}
ip link set geneve4_${i} up
ip link add geneve6_${i} type geneve local 2001:9292::${i} external
ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad
ip link set geneve6_${i} up
done
# ip -d l | grep geneve
9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.1 ...
10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::1 ...
11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.2 ...
12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::2 ...
# ss -ua | grep geneve
UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:*
UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:*
UNCONN 0 0 [2001:9292::2]:geneve *:*
UNCONN 0 0 [2001:9292::1]:geneve *:*
Note that even if the local address is explicitly configured with
the wildcard address, kernel does not dump it except for devices with
IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour
of is_tnl_info_zero(), which treats the wildcard remote address as not
configured.
## ynl example.
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do newlink --create \
--json '{"ifname": "geneve0",
"linkinfo": {"kind":"geneve",
"data": {"local": "0.0.0.0",
"collect-metadata": true}}}'
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do getlink \
--json '{"ifname": "geneve0"}' --output-json | \
jq .linkinfo.data.local
"0.0.0.0"
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes for v7.2
Core:
- Fixed documentation for msm_gem_shrinker functions
- IFPC related enablement/fixes for gen8
- PERFCNTR_CONFIG ioctl support
GPU
- Reworked handling of UBWC configuration
- a810 suppport
MDSS:
- Added Milos platform support
- Reworked handling of UBWC configuration
DisplayPort:
- Reworked HPD handling, preparing for the MST support
DPU:
- Added Milos platform support
- Reworked handling of UBWC configuration
DSI:
- Added Milos platform support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com
Unlocking robust non-PI futexes happens in user space with the following
sequence:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = 0;
3) lval = atomic_xchg(lock, lval);
4) if (lval & WAITERS)
5) sys_futex(WAKE,....);
6) robust_list_clear_op_pending();
That opens a window between #3 and #6 where the mutex could be acquired by
some other task which observes that it is the last user and:
A) unmaps the mutex memory
B) maps a different file, which ends up covering the same address
When the original task exits before reaching #6 then the kernel robust list
handling observes the pending op entry and tries to fix up user space.
In case that the newly mapped data contains the TID of the exiting thread
at the address of the mutex/futex the kernel will set the owner died bit in
that memory and therefore corrupting unrelated data.
PI futexes have a similar problem both for the non-contented user space
unlock and the in kernel unlock:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = gettid();
3) if (!atomic_try_cmpxchg(lock, lval, 0))
4) sys_futex(UNLOCK_PI,....);
5) robust_list_clear_op_pending();
Address the first part of the problem where the futexes have waiters and
need to enter the kernel anyway. Add a new FUTEX_ROBUST_UNLOCK flag, which
is valid for the sys_futex() FUTEX_UNLOCK_PI, FUTEX_WAKE, FUTEX_WAKE_BITSET
operations.
This deliberately omits FUTEX_WAKE_OP from this treatment as it's unclear
whether this is needed and there is no usage of it in glibc either to
investigate.
For the futex2 syscall family this needs to be implemented with a new
syscall.
The sys_futex() case [ab]uses the @uaddr2 argument to hand the pointer to
robust_list_head::list_pending_op into the kernel. This argument is only
evaluated when the FUTEX_ROBUST_UNLOCK bit is set and is therefore backward
compatible.
This is an explicit argument to avoid the lookup of the robust list pointer
and retrieving the pending op pointer from there. User space has the
pointer already available so it can just put it into the @uaddr2
argument. Aside of that this allows the usage of multiple robust lists in
the future without any changes to the internal functions as they just operate
on the provided pointer.
This requires a second flag FUTEX_ROBUST_LIST32 which indicates that the
robust list pointer points to an u32 and not to an u64. This is required
for two reasons:
1) sys_futex() has no compat variant
2) The gaming emulators use both both 64-bit and compat 32-bit robust
lists in the same 64-bit application
As a consequence 32-bit applications have to set this flag unconditionally
so they can run on a 64-bit kernel in compat mode unmodified. 32-bit
kernels return an error code when the flag is not set. 64-bit kernels will
happily clear the full 64 bits if user space fails to set it.
In case of FUTEX_UNLOCK_PI this clears the robust list pending op when the
unlock succeeded. In case of errors, the user space value is still locked
by the caller and therefore the above cannot happen.
In case of FUTEX_WAKE* this does the unlock of the futex in the kernel and
clears the robust list pending op when the unlock was successful. If not,
the user space value is still locked and user space has to deal with the
returned error. That means that the unlocking of non-PI robust futexes has
to use the same try_cmpxchg() unlock scheme as PI futexes.
If the clearing of the pending list op fails (fault) then the kernel clears
the registered robust list pointer if it matches to prevent that exit()
will try to handle invalid data. That's a valid paranoid decision because
the robust list head sits usually in the TLS and if the TLS is not longer
accessible then the chance for fixing up the resulting mess is very close
to zero.
The problem of non-contended unlocks still exists and will be addressed
separately.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.670514505@kernel.org
Make the operand defines tabular for readability sake.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.615600933@kernel.org
The marker for PI futexes in the robust list is a hardcoded 0x1 which lacks
any sensible form of documentation.
Provide proper defines for the bit and the mask and fix up the usage
sites. Thereby convert the boolean pi argument into a modifier argument,
which allows new modifier bits to be trivially added and conveyed.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.458758556@kernel.org
Following the previous set of fixes, this addresses another significant
number of small issues found in firmware drivers (tee, optee, qcomtee,
qcom ice, exynos acpm) drivers through various tools. This is about
error handling, resource leaks, concurrency and a use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller,
the i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing
mostly minor configuration mistakes
-----BEGIN PGP SIGNATURE-----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=uqVQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
Previously, only the type value was settable. The proto value is used
internally for choosing the right drivers, so we should expose it. The
other values make sense to expose as well.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://patch.msgid.link/20260522015040.3953472-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new NFSD_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the nfsd export caches (svc_export and expkey)
without writing to /proc/net/rpc/*/flush.
An optional NFSD_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = svc_export, bit 2 = expkey). If the attribute is
omitted, all nfsd caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the sunrpc auth caches (ip_map and unix_gid) without
writing to /proc/net/rpc/*/flush.
An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is
omitted, all sunrpc caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the expkey (nfsd.fh) cache,
following the same pattern as the existing svc_export netlink support.
Add expkey to the cache-type enum, a new expkey attribute-set with
client, fsidtype, fsid, negative, expiry, and path fields, and the
expkey-get-reqs / expkey-set-reqs operations to the nfsd YAML spec
and generated headers.
Implement nfsd_nl_expkey_get_reqs_dumpit() which snapshots pending
expkey cache requests and sends each entry's seqno, client name,
fsidtype, and fsid over netlink.
Implement nfsd_nl_expkey_set_reqs_doit() which parses expkey cache
responses from userspace (client, fsidtype, fsid, expiry, and path
or negative flag) and updates the cache via svc_expkey_lookup() /
svc_expkey_update().
Wire up the expkey_notify() callback in svc_expkey_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_EXPKEY.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the svc_export (nfsd.export)
cache to Documentation/netlink/specs/nfsd.yaml and regenerate the
resulting files.
Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY
multicast event to the "exportd" group, carrying the cache type so
userspace knows which cache has pending requests.
Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots
pending svc_export cache requests and sends each entry's seqno,
client name, and path over netlink.
Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export
cache responses from userspace (client, path, expiry, flags, anon
uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative
flag) and updates the cache via svc_export_lookup() /
svc_export_update().
Wire up the svc_export_notify() callback in svc_export_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_SVC_EXPORT.
Note that the export-flags and xprtsec-mode enums are organized to match
their counterparts in include/uapi/linux/nfsd/export.h. The intent is
that future export options will only be added to the netlink headers,
which should eliminate the need to keep so much in sync.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the unix_gid (auth.unix.gid)
cache, using the sunrpc generic netlink family.
Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative,
expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs /
unix-gid-set-reqs operations to the sunrpc_cache YAML spec and
generated headers.
Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending
unix_gid cache requests and sends each entry's seqno and uid over
netlink.
Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid
cache responses from userspace (uid, expiry, gids as u32 multi-attr
or negative flag) and updates the cache via unix_gid_lookup() /
sunrpc_cache_update().
Wire up unix_gid_notify() callback in unix_gid_cache_template so
cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_UNIX_GID.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the ip_map (auth.unix.ip)
cache, using the sunrpc generic netlink family.
Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry),
ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations
to the sunrpc_cache YAML spec and generated headers.
Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending
ip_map cache requests and sends each entry's seqno, class name, and
IP address over netlink.
Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache
responses from userspace (class, addr, expiry, and domain name or
negative flag) and updates the cache via __ip_map_lookup() /
__ip_map_update().
Wire up ip_map_notify() callback in ip_map_cache_template so cache
misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_IP_MAP.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The auth.unix.ip and auth.unix.gid caches live in the sunrpc module,
so they cannot use the nfsd generic netlink family. Create a new
"sunrpc" generic netlink family with its own "exportd" multicast
group to support cache upcall notifications for sunrpc-resident
caches.
Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum
(ip_map, unix_gid), a cache-notify multicast event, and the
corresponding uapi header.
Implement sunrpc_cache_notify() in cache.c, which checks for
listeners on the exportd multicast group, builds and sends a
SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute.
Register/unregister the sunrpc_nl_family in init_sunrpc() and
cleanup_sunrpc().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Userspace when requesting a session via the ioctl specifies a name and
gets a FD, but then there is no ioctl to go back the other way and get
the name given a LUO session FD. This is problematic especially when
there is a userspace orchestrator that wants to check what FDs it is
handling for clients without having to do manual string scraping of
procfs, or without procfs at all.
Add a ioctl to simply get the name from an FD.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20260429212221.814107-4-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Add a new channel type for sensors that report fractional coverage as
a percentage. The sysfs attribute is in_coverageY_raw; after applying
in_coverageY_scale the value is in percent. The first user is the
ADT7604 leak detector, where the value represents the portion of the
sensing element that is wetted.
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In CoCo guests, guest memory is encrypted and untrusted (T=0) devices
cannot DMA to it directly; such transfers must go through unencrypted
bounce buffers. RDMA registers user pages for direct device access,
bypassing the DMA layer and thus any bouncing, so registered memory does
not work in this configuration.
Until trusted (T=1) device detection is available, conservatively flag
every device attached to a CoCo guest. Expose the condition to userspace
as IB_UVERBS_DEVICE_CC_DMA_BOUNCE in device_cap_flags_ex so applications
can avoid memory registration and fall back to copying buffers through
send/recv.
Link: https://patch.msgid.link/r/20260517141311.2409230-2-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add an optional mlx5 driver-namespace UMEM attribute on QP
create so userspace can supply the doorbell record umem
explicitly, symmetric to the CQ side. Resolve it inside
mlx5_ib_db_map_user() and use it as a private DBR page when
present; otherwise take the existing UHW share-or-pin path
that preserves per-page DBR sharing across CQ/QP/SRQ in the
same process.
Add mlx5's first UVERBS_OBJECT_QP UAPI definition chain to
attach the new attr.
Link: https://patch.msgid.link/r/20260529134312.2836341-17-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add an optional mlx5 driver-namespace UMEM attribute on CQ
create so userspace can supply the doorbell record buffer
explicitly. mlx5_ib_db_map_user() resolves the attribute (or
falls back to the legacy UHW VA) into a struct
ib_uverbs_buffer_desc and runs a unified lookup-then-pin:
VA-typed descriptors share a per-page umem across CQ/QP/SRQ
in the same process, FD-typed descriptors are pinned per call.
Link: https://patch.msgid.link/r/20260529134312.2836341-16-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
