cs_etm__get_queue() indexes etm->queues.queue_array[cpu] without
validating that cpu is within nr_queues. When processing
AUX_OUTPUT_HW_ID events, the cpu value comes from untrusted perf.data
trace payload and flows through cs_etm__process_trace_id_v0_1() and
cs_etm__queue_aux_fragment() without bounds checking, allowing an
out-of-bounds read with a crafted file.
Add a bounds check in cs_etm__get_queue() and NULL checks in all
callers.
Also add NULL checks for queue_array[i].priv in the queue iteration
loops in cs_etm__map_trace_id_v0() and cs_etm__process_trace_id_v0_1()
— after auxtrace_queues__grow() new entries are zero-initialized so
.priv can be NULL. Add a get_cpu_data() NULL check in
cs_etm__process_trace_id_v0_1(), matching the existing check in
cs_etm__process_trace_id_v0().
Fixes: 77c123f53e ("perf: cs-etm: Move traceid_list to each queue")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cs_etm__process_auxtrace_info_full() reads num_cpu from untrusted
perf.data and uses it to allocate the metadata pointer array:
metadata = zalloc(sizeof(*metadata) * num_cpu);
On 32-bit, sizeof(*metadata) is 4, so num_cpu = 0x40000000 overflows
the multiplication to 0, causing zalloc(0) to return a valid zero-sized
allocation followed by out-of-bounds writes in the population loop.
Fix by computing priv_size early and using it to bound num_cpu: each
CPU needs at least one u64 metadata entry, so num_cpu cannot exceed
the total number of u64 entries in the event's private data area.
Fixes: cd8bfd8c97 ("perf tools: Add processing of coresight metadata")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Tor Jeremiassen <tor@ti.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
metadata[j][CS_ETM_CPU] is a u64 from perf.data, but the comparison
with max_cpu casts it to (int). A crafted value like 0xFFFFFFFF becomes
-1 after the cast, which compares less than max_cpu (0), so the queue
array is never sized to accommodate it. When the value is later passed
to cs_etm__get_queue(), it indexes queue_array with the original large
value, causing an out-of-bounds access.
Validate that CS_ETM_CPU fits in an int before using it in the signed
comparison.
Fixes: 57880a7966 ("perf: cs-etm: Allocate queues for all CPUs")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PE_CONTEXT elements update the context ID and exception level, but the
decoder may still have prior packets cached for frontend processing.
Updating the context immediately in the decoder backend can make those
cached packets get consumed with the wrong thread or EL state.
Add a CS_ETM_CONTEXT packet carrying the TID and EL to the frontend,
this keeps context changes ordered with the rest of the packet stream
and avoids mismatches when synthesizing samples from cached packets.
Separate the memory access function into one for the frontend and one
for decoding. The frontend also needs memory access to attach the
instruction to samples. Because the frontend does memory access for
both previous and current packets, change all the frontend memory access
function signatures to take both a tidq and packet. But backend always
uses the current backend EL and thread from the tidq.
Treat context packets as a boundary for branch sample generation and
remove tidq->prev_packet_thread because it's not possible to branch to a
different thread, so only tracking the current thread is required for
sample generation.
Fixes: e573e978fb ("perf cs-etm: Inject capabilitity for CoreSight traces")
Reported-by: Amir Ayupov <aaupov@meta.com>
Closes: https://lore.kernel.org/linux-perf-users/20260515021135.1729028-1-aaupov@meta.com/
Co-authored-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
event_contains() checked whether a field's start offset was within
the event (header.size > offsetof), but not whether the full field
fit. A crafted event with header.size = offsetof(field) + 1 would
pass the check, but an 8-byte access (bswap_64, direct read) would
overrun the event boundary by up to 7 bytes.
Fix the macro to verify the complete field:
header.size >= offsetof(field) + sizeof(field)
Also update all callers that check event_contains(time_cycles) but
access later fields (time_mask, cap_user_time_zero,
cap_user_time_short) to check for cap_user_time_short — the last
field accessed — so the entire extended block is verified:
tsc.c, arm-spe.c, cs-etm.c, jitdump.c.
Note: session.c's perf_event__time_conv_swap() also guards on
time_cycles but accesses time_mask — a pre-existing issue not
introduced by this macro change. It is fixed by a later patch
in this series ("perf session: Add validated swap
infrastructure with null-termination checks"), which decouples
time_cycles and time_mask into independent per-field
event_contains() checks. The struct assignment overread
(session->time_conv = event->time_conv copies sizeof on a
potentially shorter event) is separately fixed by "perf
session: Use bounded copy for PERF_RECORD_TIME_CONV".
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesizing branch stacks for Intel-PT highlighted an issue where
PERF_SAMPLE_BRANCH_HW_INDEX was assumed to always be set in the
perf_event_attr branch_sample_type. This caused an incorrect size
calculation.
Fix the writing of the nr and hw_idx values during sample event
synthesis by passing the branch_sample_type into the sample size
and synthesis functions. Also update hardware tracers (Intel PT,
ARM SPE, CS-ETM) to retrieve and pass their branch_sample_type
dynamically to prevent payload misalignment.
Fixes: d3f85437ad ("perf evsel: Support PERF_SAMPLE_BRANCH_HW_INDEX")
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These #defines have been removed from the kernel headers in favour of
the string based PMU format attributes. Usages were previously removed
from the recording side of cs-etm in Perf. Finish the removal by
removing usages from the decode side too.
It's a straight replacement of the old #defines with the new register
bit definitions. Except cs_etm__setup_timeless_decoding() which wasn't
looking at the saved metadata and was instead hard coding an access to
'attr.config'. This was vulnerable to the same issue of .config being
moved to .config2 etc that the original removal of ETM_OPT_* tried to
fix. So fix that too.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the bitfield dependency is resolved, the explicit inclusion of
kernel.h is no longer needed.
Remove the redundant include.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ETM decoder incorrectly assumed that auxtrace queue indices were
equivalent to CPU number. This assumption is used for inserting records
into the queue, and for fetching queues when given a CPU number. This
assumption held when Perf always opened a dummy event on every CPU, even
if the user provided a subset of CPUs on the commandline, resulting in
the indices aligning.
For example:
# event : name = cs_etm//u, , id = { 2451, 2452 }, type = 11 (cs_etm), size = 136, config = 0x4010, { sample_period, samp>
# event : name = dummy:u, , id = { 2453, 2454, 2455, 2456 }, type = 1 (PERF_TYPE_SOFTWARE), size = 136, config = 0x9 (PER>
0 0 0x200 [0xd0]: PERF_RECORD_ID_INDEX nr: 6
... id: 2451 idx: 2 cpu: 2 tid: -1
... id: 2452 idx: 3 cpu: 3 tid: -1
... id: 2453 idx: 0 cpu: 0 tid: -1
... id: 2454 idx: 1 cpu: 1 tid: -1
... id: 2455 idx: 2 cpu: 2 tid: -1
... id: 2456 idx: 3 cpu: 3 tid: -1
Since commit 811082e4b6 ("perf parse-events: Support user CPUs mixed
with threads/processes") the dummy event no longer behaves in this way,
making the ETM event indices start from 0 on the first CPU recorded
regardless of its ID:
# event : name = cs_etm//u, , id = { 771, 772 }, type = 11 (cs_etm), size = 144, config = 0x4010, { sample_period, sample>
# event : name = dummy:u, , id = { 773, 774 }, type = 1 (PERF_TYPE_SOFTWARE), size = 144, config = 0x9 (PERF_COUNT_SW_DUM>
0 0 0x200 [0x90]: PERF_RECORD_ID_INDEX nr: 4
... id: 771 idx: 0 cpu: 2 tid: -1
... id: 772 idx: 1 cpu: 3 tid: -1
... id: 773 idx: 0 cpu: 2 tid: -1
... id: 774 idx: 1 cpu: 3 tid: -1
This causes the following segfault when decoding:
$ perf record -e cs_etm//u -C 2,3 -- true
$ perf report
perf: Segmentation fault
-------- backtrace --------
#0 0xaaaabf9fd020 in ui__signal_backtrace setup.c:110
#1 0xffffab5c7930 in __kernel_rt_sigreturn [vdso][930]
#2 0xaaaabfb68d30 in cs_etm_decoder__reset cs-etm-decoder.c:85
#3 0xaaaabfb65930 in cs_etm__get_data_block cs-etm.c:2032
#4 0xaaaabfb666fc in cs_etm__run_per_cpu_timeless_decoder cs-etm.c:2551
#5 0xaaaabfb6692c in (cs_etm__process_timeless_queues cs-etm.c:2612
#6 0xaaaabfb63390 in cs_etm__flush_events cs-etm.c:921
#7 0xaaaabfb324c0 in auxtrace__flush_events auxtrace.c:2915
#8 0xaaaabfaac378 in __perf_session__process_events session.c:2285
#9 0xaaaabfaacc9c in perf_session__process_events session.c:2442
#10 0xaaaabf8d3d90 in __cmd_report builtin-report.c:1085
#11 0xaaaabf8d6944 in cmd_report builtin-report.c:1866
#12 0xaaaabf95ebfc in run_builtin perf.c:351
#13 0xaaaabf95eeb0 in handle_internal_command perf.c:404
#14 0xaaaabf95f068 in run_argv perf.c:451
#15 0xaaaabf95f390 in main perf.c:558
#16 0xffffaab97400 in __libc_start_call_main libc_start_call_main.h:74
#17 0xffffaab974d8 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#18 0xaaaabf8aa8f0 in _start perf[7a8f0]
Fix it by inserting into the queues based on CPU number, rather than
using the index.
Fixes: 811082e4b6 ("perf parse-events: Support user CPUs mixed with threads/processes")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the file tools/perf/util/cs-etm.c, queue_nr is of type unsigned
int and should be printed with %u.
Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To avoid hardcoding the offset value for synthetic event IDs
in multiple auxtrace modules (arm-spe, cs-etm, intel-pt, etc.),
and to improve code reusability, this patch unifies
the handling of the ID offset via a dedicated helper function.
Signed-off-by: tanze <tanze@kylinos.cn>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The struct dump_regs contains 512 bytes of cache_regs, meaning the two
values in perf_sample contribute 1088 bytes of its total 1384 bytes
size. Initializing this much memory has a cost reported by Tavian
Barnes <tavianator@tavianator.com> as about 2.5% when running `perf
script --itrace=i0`:
https://lore.kernel.org/lkml/d841b97b3ad2ca8bcab07e4293375fb7c32dfce7.1736618095.git.tavianator@tavianator.com/
Adrian Hunter <adrian.hunter@intel.com> replied that the zero
initialization was necessary and couldn't simply be removed.
This patch aims to strike a middle ground of still zeroing the
perf_sample, but removing 79% of its size by make user_regs and
intr_regs optional pointers to zalloc-ed memory. To support the
allocation accessors are created for user_regs and intr_regs. To
support correct cleanup perf_sample__init and perf_sample__exit
functions are created and added throughout the code base.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250113194345.1537821-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcMPK0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGw5kH/0GukMc4uUytezog
7UxIxa0G1zvwJwAhJpNCZR90e8GQ7YCvJFUOxjX3bVqjxZlCjEJ3YWC3fZNdx8YS
fOjbuZlGiTmyKg91aVYlby5l23N+r2u6gCDBdPfJD0japiIbayBKjrL+hdEicmf3
w6qToMY20mdvRQ6SUd+Y9nrc//TONru4EhabqRU2Sf1sDzQd1qj4WPtDLSKp3YG9
hpFR7YeJaSYDjwRz1vF8tEnQVJ4I2Df3lXJZYsoSsqiQhQ1Lasp4a09ppVPysj6x
oQCza6xeR3jwKib23pZIbNAF4xPMdN1OMOiYELkgHo7YGc6kxniXqSVSrP3LAvkA
b92bQpc=
=T5hJ
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc3' into perf-tools-next
To get the fixes in the current perf-tools tree.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If one builds perf with DEBUG=1, captures data on multiple CPUs and
finally runs 'perf report -C <cpu>' for only one of the cpus, assert()
aborts the program. This happens because there are empty queues with
format set.
This patch changes the condition to abort only if a queue is not empty
and if the format is unset.
$ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install
$ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1
$ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1
Aborted (core dumped)
Fixes: 57880a7966 ("perf: cs-etm: Allocate queues for all CPUs")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240924233930.5193-1-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cs_etm__flush(), like cs_etm__sample() is an operation that generates a
sample and then swaps the current with the previous packet. Calling
flush after processing the queues results in two swaps which corrupts
the next sample. Therefore it wasn't appropriate to call flush here so
remove it.
Flushing is still done on a discontinuity to explicitly clear the last
branch buffer, but when the packet_queue fills up before reaching a
timestamp, that's not a discontinuity and the call to
cs_etm__process_traceid_queue() already generated samples and drained
the buffers correctly.
This is visible by looking for a branch that has the same target as the
previous branch and the following source is before the address of the
last target, which is impossible as execution would have had to have
gone backwards:
ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
(packet_queue fills here before a timestamp, resulting in a flush and
branch target ffff80008011cadc is duplicated.)
ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff80008011cadc update_sg_lb_stats+0x94
ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34
After removing the flush the correct branch target is used for the
second sample, and ffff8000801117c4 is no longer before the previous
address:
ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff8000801117a0 cpu_util+0x0
ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34
Make sure that a final branch stack is output at the end of the trace
by calling cs_etm__end_block(). This is already done for both the
timeless decode paths.
Fixes: 21fe8dc119 ("perf cs-etm: Add support for CPU-wide trace scenarios")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Closes: https://lore.kernel.org/all/20240719092619.274730-1-gankulkarni@os.amperecomputing.com/
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now that we have overlapping trace IDs it's also useful to know what the
queue number is to be able to distinguish the source of the trace so
print it inline. Hide it behind the -v option because it might not be
obvious to users what the queue number is.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-8-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
v0.1 HW_ID packets have a new field that describes which sink each CPU
writes to. Use the sink ID to link trace ID maps to each other so that
mappings are shared wherever the sink is shared.
Also update the error message to show that overlapping IDs aren't an
error in per-thread mode, just not supported. In the future we can
use the CPU ID from the AUX records, or watch for changing sink IDs on
HW_ID packets to use the correct decoders.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-7-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that each queue has a unique set of trace ID mappings, use this
list to create the decoders. In unformatted mode just add a single
mapping so only one decoder is made.
Previously each queue would have a decoder created for each traced CPU
on the system but this won't work anymore because CPUs can have
overlapping trace IDs.
This also means that the CORESIGHT_TRACE_ID_UNUSED_FLAG isn't needed
any more. If mappings aren't added then decoders aren't created, rather
than needing a flag to suppress creation.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-5-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The global list won't work for per-sink trace ID allocations, so put a
list in each queue where the IDs will be unique to that queue.
To keep the same behavior as before, for version 0 of the HW_ID packets,
copy all the HW_ID mappings into all queues.
This change doesn't effect the decoders, only trace ID lookups on the
Perf side. The decoders are still created with global mappings which
will be fixed in a later commit.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-4-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make cs_etm__setup_queue() setup a queue even if it's empty, and
pre-allocate queues based on the max CPU that was recorded. In per-CPU
mode aux queues are indexed based on CPU ID even if all CPUs aren't
recorded, sparse queue arrays aren't used.
This will allow HW_IDs to be saved even if no aux data was received in
that queue without having to call cs_etm__setup_queue() from two
different places.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-3-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both of these passes gather information about how to create the
decoders. AUX records determine formatted/unformatted, and the HW_IDs
determine the traceID/metadata mappings.
Therefore it makes sense to cache the information and wait until both
passes are over until creating the decoders, rather than creating them
at the first HW_ID found.
This will allow a simplification of the creation process where
cs_etm_queue->traceid_list will exclusively used to create the decoders,
rather than the current two methods depending on whether the trace is
formatted or not.
Previously the sample CPU from the AUX record was used to initialize
the decoder CPU, but actually sample CPU == AUX queue index in per-CPU
mode, so saving the sample CPU isn't required.
Similarly formatted/unformatted was used upfront to create the decoders,
but now it's cached until later.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-2-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be const to lower the possibilities of what could
happen with a tool.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_session__deliver_synth_attr_event that synthesizes a
perf_record_header_attr event with one id. Remove use of
perf_event__synthesize_attr that necessitates the use of the dummy
tool in order to pass the session.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally exception packets don't directly output a branch sample, but
if they're the last record in a buffer then they will. Because they
don't have addresses set we'll see the placeholder value
CS_ETM_INVAL_ADDR (0xdeadbeef) in the output.
Since commit 6035b6804b ("perf cs-etm: Support dummy address value for
CS_ETM_TRACE_ON packet") we've used 0 as an externally visible "not set"
address value. For consistency reasons and to not make exceptions look
like an error, change them to use 0 too.
This is particularly visible when doing userspace only tracing because
trace is disabled when jumping to the kernel, causing the flush and then
forcing the last exception packet to be emitted as a branch. With kernel
trace included, there is no flush so exception packets don't generate
samples until the next range packet and they'll pick up the correct
address.
Before:
$ perf record -e cs_etm//u -- stress -i 1 -t 1
$ perf script -F comm,ip,addr,flags
stress syscall ffffb7eedbc0 => deadbeefdeadbeef
stress syscall ffffb7f14a14 => deadbeefdeadbeef
stress syscall ffffb7eedbc0 => deadbeefdeadbeef
After:
stress syscall ffffb7eedbc0 => 0
stress syscall ffffb7f14a14 => 0
stress syscall ffffb7eedbc0 => 0
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: gankulkarni@os.amperecomputing.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240722152756.59453-2-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The likely fix for this is to update perf so print a helpful message.
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Acked-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Clevenger <scclevenger@os.amperecomputing.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240429152207.479221-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prior to Armv8.4, the feature FEAT_TRF is not supported by Arm CPUs.
Consequently, the sysfs node 'ts_source' will not be set as 1 by the
CoreSight ETM driver. On the other hand, the perf tool relies on the
'ts_source' node to determine whether the kernel timestamp is traced.
Since the 'ts_source' is not set for Arm CPUs prior to Armv8.4,
platforms in this case cannot utilize the traced timestamp as the kernel
time.
This patch enables the 'T' itrace option, which forcibly utilizes the
traced timestamp as the kernel time. If users are aware that their
working platform's Arm CoreSight shares the same counter with the kernel
time, they can specify 'T' option to decode the traced timestamp as the
kernel time.
An usage example is:
# perf record -e cs_etm// -- test_program
# perf script --itrace=i10ibT
# perf report --itrace=i10ibT
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231014074513.1668000-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
linux/bitfield.h can be included as long as linux/kernel.h is included
first, so change the order of the includes and drop the duplicate macro.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Forrington <nick.forrington@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sohom Datta <sohomdatta1@gmail.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230811144017.491628-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Assert that our own tracking of the exception level matches what
OpenCSD provides. OpenCSD doesn't distinguish between EL0 and EL1 in the
memory access callback so the extra tracking was required. But a rough
assert can still be done.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230612111403.100613-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we assume all trace belongs to the host machine so when
the decoder should be looking at the guest kernel maps it can crash
because it looks at the host ones instead.
Avoid one scenario (guest kernel running at EL1) by assigning the
default guest machine to this trace. For userspace trace it's still not
possible to determine guest vs host, but the PIDs should help in this
case.
Committer notes:
Fixed up conflict with:
perf addr_location: Add init/exit/copy functions
That was only on tmp.perf-tools-next.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230612111403.100613-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid every user of PID format having to use their own static
local variable, cache it on initialisation and change the accessor to
take struct cs_etm_auxtrace.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230612111403.100613-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Branch samples currently use the IP of the previous packet as the from
IP, and the IP of the current packet as the to IP. But it incorrectly
uses the current thread. In some cases like a jump into a different
exception level this will attribute to the incorrect process.
Fix it by tracking the previous thread in the same way the previous
packet is tracked.
Committer notes:
Resolved conflicts with:
perf addr_location: Add init/exit/copy functions
perf thread: Add accessor functions for thread
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20230612111403.100613-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PIDs and TIDs are already contained within the thread struct, so to
avoid inconsistencies drop the extra members on the etm queue and only
use the thread struct.
At the same time stop using the 'unknown' thread. In a later commit
we will be making samples from multiple machines so it will be better
to use the idle thread of each machine rather than overlapping unknown
threads. Using the idle thread is also better because kernel addresses
with a previously unknown thread will now be assigned to a real kernel
thread.
Committer notes:
Resolved conflicts with:
perf addr_location: Add init/exit/copy functions
perf thread: Add accessor functions for thread
perf thread: Remove notion of dead threads
That were present in tmp.perf-tools.next only.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20230612111403.100613-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct addr_location holds references to multiple reference counted
objects. Add init/exit functions to make maintenance of those more
consistent with the rest of the code and to try to avoid
leaks. Modification of thread reference counts isn't included in this
change.
Committer notes:
I needed to initialize result to sample->ip to make sure is set to
something, fixing a compile time error, mostly keeping the previous
logic as build_alloc_func_list() already does debugging/error prints
about what went wrong if it takes the 'goto out'.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using accessors will make it easier to add reference count checking in
later patches.
Committer notes:
thread->nsinfo wasn't wrapped as it is used together with
nsinfo__zput(), where does a trick to set the field with a refcount
being dropped to NULL, and that doesn't work well with using
thread__nsinfo(thread), that loses the &thread->nsinfo pointer.
When refcount checking is added to 'struct thread', later in this
series, nsinfo__zput(RC_CHK_ACCESS(thread)->nsinfo) will be used to
check the thread pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dead thread list is best effort. Threads live on it until the
reference count hits zero and they are removed. With correct reference
counting this should never happen. It is, however, part of the 'perf
sched' output that is now removed. If this is an issue we should
implement tracking of dead threads in a robust not best-effort way.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Cc: Yuan Can <yuancan@huawei.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230608232823.4027869-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timeless and per-thread are orthogonal concepts that are currently
treated as if they are the same (per-thread == timeless). This breaks
when you modify the command line or itrace options to something that the
current logic doesn't expect.
For example:
# Force timeless with Z
--itrace=Zi10i
# Or inconsistent record options
-e cs_etm/timestamp=1/ --per-thread
Adding Z for decoding in per-cpu mode is particularly bad because in
per-thread mode trace channel IDs are discarded and all assumed to be 0,
which would mix trace from different CPUs in per-cpu mode.
Although the results might not be perfect in all scenarios, if the user
requests no timestamps, it should still be possible to decode in either
mode. Especially if the relative times of samples in different processes
aren't interesting, quite a bit of space can be saved by turning off
timestamps in per-cpu mode.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230424134748.228137-8-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using u8 for boolean values makes the code a bit more difficult to read
so be more explicit by using bool.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230424134748.228137-7-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this context, timeless refers to the trace data rather than the perf
event data. But when detecting whether there are timestamps in the trace
data or not, the presence of a timestamp flag on any perf event is used.
Since commit f42c0ce573 ("perf record: Always get text_poke events
with --kcore option") timestamps were added to a tracking event when
--kcore is used which breaks this detection mechanism. Fix it by
detecting if trace timestamps exist by looking at the ETM config flags.
This would have always been a more accurate way of doing it anyway.
This fixes the following error message when using --kcore with
Coresight:
$ perf record --kcore -e cs_etm// --per-thread
$ perf report
The perf.data/data data has no samples!
Fixes: f42c0ce573 ("perf record: Always get text_poke events with --kcore option")
Reported-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: denik@google.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/lkml/CAHbLzkrJQTrYBtPkf=jf3OpQ-yBcJe7XkvQstX9j2frz4WF-SQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20230424134748.228137-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
map__dso() is called before thread__find_map() which always results in a
null pointer dereference. Fix it by finding first, then checking if it
exists.
Fixes: 63df0e4bc3 ("perf map: Add accessor for dso")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230418141203.673465-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The definitions are in util.c so move the declarations to match.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raul Silvera <rsilvera@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230410162511.3055900-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later changes will add reference count checking for struct map, add a
helper function to invoke the map_ip and unmap_ip function pointers. The
helper allows the reference count check to be in fewer places.
Committer notes:
Add missing conversions to:
tools/perf/util/map.c
tools/perf/util/cs-etm.c
tools/perf/util/annotate.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/arch/s390/annotate/instructions.c
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230404205954.2245628-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later changes will add reference count checking for struct map, with
dso being the most frequently accessed variable. Add an accessor so
that the reference count check is only necessary in one place.
Additional changes:
- add a dso variable to avoid repeated map__dso calls.
- in builtin-mem.c dump_raw_samples, code only partially tested for
dso == NULL. Make the possibility of NULL consistent.
- in thread.c thread__memcpy fix use of spaces and use tabs.
Committer notes:
Did missing conversions on these files:
tools/perf/arch/powerpc/util/skip-callchain-idx.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/ui/browsers/hists.c
tools/perf/ui/gtk/annotate.c
tools/perf/util/cs-etm.c
tools/perf/util/thread.c
tools/perf/util/unwind-libunwind-local.c
tools/perf/util/unwind-libunwind.c
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320212248.1175731-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using dynamically assigned CoreSight trace IDs the drivers can output
the ID / CPU association as a PERF_RECORD_AUX_OUTPUT_HW_ID packet.
Update cs-etm decoder to handle this packet by setting the CPU/Trace ID
mapping.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230331055645.26918-2-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The information to associate Trace ID and CPU will be changing.
Drivers will start outputting this as a hardware ID packet in the data
file which if present will be used in preference to the AUXINFO values.
To prepare for this we provide a helper functions to do the individual ID
mapping, and one to extract the IDs from the completed metadata blocks.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230331055645.26918-2-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If virtual timestamps are detected, set sample time field accordingly,
otherwise warn the user that the samples will not include accurate
time data.
| Test notes (FEAT_TRF platform)
|
| $ ./perf record -e cs_etm//u -a -- sleep 4
| $ ./perf script --fields +time
| perf 422 [000] 163.375100: 1 branches:uH: 0 [unknown] ([unknown])
| perf 422 [000] 163.375100: 1 branches:uH: ffffb8009544 ioctl+0x14 (/lib/aarch64-linux-gnu/libc-2.27.so)
| perf 422 [000] 163.375100: 1 branches:uH: aaaaab6bebf4 perf_evsel__run_ioctl+0x90 (/home/german/linux/tools/perf/perf)
| [...]
| perf 422 [000] 167.393100: 1 branches:uH: aaaaab6bda00 __xyarray__entry+0x74 (/home/german/linux/tools/perf/perf)
| perf 422 [000] 167.393099: 1 branches:uH: aaaaab6bda0c __xyarray__entry+0x80 (/home/german/linux/tools/perf/perf)
| perf 422 [000] 167.393099: 1 branches:uH: ffffb8009538 ioctl+0x8 (/lib/aarch64-linux-gnu/libc-2.27.so)
|
| The time from the first sample to the last sample is 4 seconds
Now that times are converted to nanoseconds, also try to estimate the
timestamps more accurately be dividing by some fixed value for
instructions per ns. This prevents long ranges from being estimated
too far in the past than would be realistic.
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-8-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously, adding a new parameter at the end of ETMv4 meant adding it
somewhere in the middle of ETE, which is not supported by the current
header version.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-6-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Printing the info doesn't have any dependency on OpenCSD, and neither
does recording Coresight data. Because it's sometimes useful to look at
the info for debugging, it makes sense to be able to see it on the same
platform that the recording was made on.
So pull the auxtrace info printing parts into a new file that is always
compiled into Perf.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20221212155513.2259623-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
