Commit graph

23,238 commits

Author SHA1 Message Date
Linus Torvalds
df4793505a Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR,
 but it proved to be a lockdep false positive, not a blocker.
 
 Current release - regressions:
 
   - dpll: move all dpll<>netdev helpers to dpll code, fix build
     regression with old compilers
 
 Current release - new code bugs:
 
   - page_pool: fix netlink dump stop/resume
 
 Previous releases - regressions:
 
   - bpf: fix verifier to check bpf_func_state->callback_depth when pruning
        states as otherwise unsafe programs could get accepted
 
   - ipv6: avoid possible UAF in ip6_route_mpath_notify()
 
   - ice: reconfig host after changing MSI-X on VF
 
   - mlx5:
     - e-switch, change flow rule destination checking
     - add a memory barrier to prevent a possible null-ptr-deref
     - switch to using _bh variant of of spinlock where needed
 
 Previous releases - always broken:
 
   - netfilter: nf_conntrack_h323: add protection for bmp length out of range
 
   - bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
 	program in CPU map which led to random xdp_md fields
 
   - xfrm: fix UDP encapsulation in TX packet offload
 
   - netrom: fix data-races around sysctls
 
   - ice:
     - fix potential NULL pointer dereference in ice_bridge_setlink()
     - fix uninitialized dplls mutex usage
 
   - igc: avoid returning frame twice in XDP_REDIRECT
 
   - i40e: disable NAPI right after disabling irqs when handling xsk_pool
 
   - geneve: make sure to pull inner header in geneve_rx()
 
   - sparx5: fix use after free inside sparx5_del_mact_entry
 
   - dsa: microchip: fix register write order in ksz8_ind_write8()
 
 Misc:
 
   -  selftests: mptcp: fixes for diag.sh
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmXptoYSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkK3IP+QGe1Q37l75YM8IPpihjNYvBTiP6VWv0
 3cKoI0kz2EF5zmt3RAPK1M/ea1GY1L4Fsa/tdV0b9BzP9xC3si7IdFLZLqXh5tUX
 tW5m1LIoPqYLXE2i7qtOS5omMuCqKm2gM7TURarJA0XsAGyu645bYiJeT5dybnZQ
 AuAsXKj9RM3AkcLiqB4PZjdDuG9vIQLi2wSIybP4KFGqY7UMRlkRKFYlu2rpF29s
 XPlR671chaX90sP4bNwf+qVr81Ebu9APmDA0a9tVFDkgEqhPezpRDGHr2Kj+W25s
 j3XXwoygL6gIpJKzRgHsugAaZjla82DpCuygPOcmtTEEtHmF6fn8mBebjY/QDL6w
 ibbcOYJpzPFccRfMyHiiwzjqcaj+Zc58DktFf3H4EnKJULPralhKyMoyPngiAo1Y
 wNIGlWR8SNLhJzyZMeFPMKsz3RnLiC5vMdXMFfZdyH1RHHib5L+8AVogya+SaVkF
 1J1DrrShOEddvlrbZbM8c/03WHkAJXSRD34oHW9c3PkZscSzHmB1xqI1bER6sc5U
 5FjuDnsQDQ61pa6pip2Ug71UOw6ZAwZJs6AgestI49caDvUpSKI7jg/F6Dle6wNT
 p2KVUWFoz5BQBXG8Ut7yWpWvoEmaHe0cEn03rqZSYFnltWgkNvWMRMhkzuroOHWO
 UmOnuVIQH9Vh
 =0bH0
 -----END PGP SIGNATURE-----

Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, ipsec and netfilter.

  No solution yet for the stmmac issue mentioned in the last PR, but it
  proved to be a lockdep false positive, not a blocker.

  Current release - regressions:

   - dpll: move all dpll<>netdev helpers to dpll code, fix build
     regression with old compilers

  Current release - new code bugs:

   - page_pool: fix netlink dump stop/resume

  Previous releases - regressions:

   - bpf: fix verifier to check bpf_func_state->callback_depth when
     pruning states as otherwise unsafe programs could get accepted

   - ipv6: avoid possible UAF in ip6_route_mpath_notify()

   - ice: reconfig host after changing MSI-X on VF

   - mlx5:
       - e-switch, change flow rule destination checking
       - add a memory barrier to prevent a possible null-ptr-deref
       - switch to using _bh variant of of spinlock where needed

  Previous releases - always broken:

   - netfilter: nf_conntrack_h323: add protection for bmp length out of
     range

   - bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
     program in CPU map which led to random xdp_md fields

   - xfrm: fix UDP encapsulation in TX packet offload

   - netrom: fix data-races around sysctls

   - ice:
       - fix potential NULL pointer dereference in ice_bridge_setlink()
       - fix uninitialized dplls mutex usage

   - igc: avoid returning frame twice in XDP_REDIRECT

   - i40e: disable NAPI right after disabling irqs when handling
     xsk_pool

   - geneve: make sure to pull inner header in geneve_rx()

   - sparx5: fix use after free inside sparx5_del_mact_entry

   - dsa: microchip: fix register write order in ksz8_ind_write8()

  Misc:

   - selftests: mptcp: fixes for diag.sh"

* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  net: pds_core: Fix possible double free in error handling path
  netrom: Fix data-races around sysctl_net_busy_read
  netrom: Fix a data-race around sysctl_netrom_link_fails_count
  netrom: Fix a data-race around sysctl_netrom_routing_control
  netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
  netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
  netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
  netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
  netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
  netrom: Fix a data-race around sysctl_netrom_transport_timeout
  netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
  netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
  netrom: Fix a data-race around sysctl_netrom_default_path_quality
  netfilter: nf_conntrack_h323: Add protection for bmp length out of range
  netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
  netfilter: nft_ct: fix l3num expectations with inet pseudo family
  netfilter: nf_tables: reject constant set with timeout
  netfilter: nf_tables: disallow anonymous set with timeout flag
  net/rds: fix WARNING in rds_conn_connect_if_down
  net: dsa: microchip: fix register write order in ksz8_ind_write8()
  ...
2024-03-07 09:23:33 -08:00
Mark Brown
44d10c27bd kselftest/arm64: Add 2023 DPISA hwcap test coverage
Add the hwcaps added for the 2023 DPISA extensions to the hwcaps test
program.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-9-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-03-07 17:14:55 +00:00
Mark Brown
7bcebadda0 kselftest/arm64: Add basic FPMR test
Verify that a FPMR frame is generated on systems that support FPMR and not
generated otherwise.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-8-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-03-07 17:14:54 +00:00
Mark Brown
f4dcccdda5 kselftest/arm64: Handle FPMR context in generic signal frame parser
Teach the generic signal frame parsing code about the newly added FPMR
frame, avoiding warnings every time one is generated.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-7-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-03-07 17:14:54 +00:00
Mickaël Salaün
41cca0542d selftests/harness: Fix TEST_F()'s vfork handling
Always run fixture setup in the grandchild process, and by default also
run the teardown in the same process.  However, this change makes it
possible to run the teardown in a parent process when
_metadata->teardown_parent is set to true (e.g. in fixture setup).

Fix TEST_SIGNAL() by forwarding grandchild's signal to its parent.  Fix
seccomp tests by running the test setup in the parent of the test
thread, as expected by the related test code.  Fix Landlock tests by
waiting for the grandchild before processing _metadata.

Use of exit(3) in tests should be OK because the environment in which
the vfork(2) call happen is already dedicated to the running test (with
flushed stdio, setpgrp() call), see __run_test() and the call to fork(2)
just before running the setup/test/teardown.  Even if the test
configures its own exit handlers, they will not be run by the parent
because it never calls exit(3), and the test function either ends with a
call to _exit(2) or a signal.

Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 0710a1a73f ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240305201029.1331333-1-mic@digikod.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 20:31:50 -08:00
Eduard Zingerman
5208930a90 selftests/bpf: Test cases for '?' in BTF names
Two test cases to verify that '?' and other printable characters are
allowed in BTF DATASEC names:
- DATASEC with name "?.foo bar:buz" should be accepted;
- type with name "?foo" should be rejected.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-16-eddyz87@gmail.com
2024-03-06 15:18:16 -08:00
Eduard Zingerman
733e5e8754 selftests/bpf: Test case for SEC("?.struct_ops")
Check that "?.struct_ops" and "?.struct_ops.link" section names define
struct_ops maps with autocreate == false after open.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-14-eddyz87@gmail.com
2024-03-06 15:18:16 -08:00
Eduard Zingerman
651d49f15b selftests/bpf: Verify struct_ops autoload/autocreate sync
Check that autocreate flags of struct_ops map cause autoload of
struct_ops corresponding programs:
- when struct_ops program is referenced only from a map for which
  autocreate is set to false, that program should not be loaded;
- when struct_ops program with autoload == false is set to be used
  from a map with autocreate == true using shadow var,
  that program should be loaded;
- when struct_ops program is not referenced from any map object load
  should fail.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-10-eddyz87@gmail.com
2024-03-06 15:18:15 -08:00
Eduard Zingerman
1863acccdf selftests/bpf: Test autocreate behavior for struct_ops maps
Check that bpf_map__set_autocreate() can be used to disable automatic
creation for struct_ops maps.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-8-eddyz87@gmail.com
2024-03-06 15:18:15 -08:00
Eduard Zingerman
c1b93c07b3 selftests/bpf: Bad_struct_ops test
When loading struct_ops programs kernel requires BTF id of the
struct_ops type and member index for attachment point inside that
type. This makes impossible to use same BPF program in several
struct_ops maps that have different struct_ops type.
Check if libbpf rejects such BPF objects files.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-7-eddyz87@gmail.com
2024-03-06 15:18:15 -08:00
Eduard Zingerman
c8617e8bcf selftests/bpf: Utility functions to capture libbpf log in test_progs
Several test_progs tests already capture libbpf log in order to check
for some expected output, e.g bpf_tcp_ca.c, kfunc_dynptr_param.c,
log_buf.c and a few others.

This commit provides a, hopefully, simple API to capture libbpf log
w/o necessity to define new print callback in each test:

    /* Creates a global memstream capturing INFO and WARN level output
     * passed to libbpf_print_fn.
     * Returns 0 on success, negative value on failure.
     * On failure the description is printed using PRINT_FAIL and
     * current test case is marked as fail.
     */
    int start_libbpf_log_capture(void)

    /* Destroys global memstream created by start_libbpf_log_capture().
     * Returns a pointer to captured data which has to be freed.
     * Returned buffer is null terminated.
     */
    char *stop_libbpf_log_capture(void)

The intended usage is as follows:

    if (start_libbpf_log_capture())
            return;
    use_libbpf();
    char *log = stop_libbpf_log_capture();
    ASSERT_HAS_SUBSTR(log, "... expected ...", "expected some message");
    free(log);

As a safety measure, free(start_libbpf_log_capture()) is invoked in the
epilogue of the test_progs.c:run_one_test().

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-6-eddyz87@gmail.com
2024-03-06 15:18:15 -08:00
Eduard Zingerman
5bab7a277c selftests/bpf: Test struct_ops map definition with type suffix
Extend struct_ops_module test case to check if it is possible to use
'___' suffixes for struct_ops type specification.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240306104529.6453-5-eddyz87@gmail.com
2024-03-06 15:18:15 -08:00
Alexei Starovoitov
0c8bbf990b selftests/bpf: Test may_goto
Add tests for may_goto instruction via cond_break macro.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-5-alexei.starovoitov@gmail.com
2024-03-06 15:18:10 -08:00
Alexei Starovoitov
0637580152 bpf: Add cond_break macro
Use may_goto instruction to implement cond_break macro.
Ideally the macro should be written as:
  asm volatile goto(".byte 0xe5;
                     .byte 0;
                     .short %l[l_break] ...
                     .long 0;
but LLVM doesn't recognize fixup of 2 byte PC relative yet.
Hence use
  asm volatile goto(".byte 0xe5;
                     .byte 0;
                     .long %l[l_break] ...
                     .short 0;
that produces correct asm on little endian.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-4-alexei.starovoitov@gmail.com
2024-03-06 15:18:04 -08:00
Vitaly Kuznetsov
c2585047c8 KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM_FEATURE_PV_UNHALT is expected to get cleared from KVM PV feature CPUID
data when KVM_X86_DISABLE_EXITS_HLT is enabled. Add the corresponding test
to kvm_pv_test.

Note, the newly added code doesn't actually test KVM_FEATURE_PV_UNHALT and
KVM_X86_DISABLE_EXITS_HLT features.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-4-vkuznets@redhat.com
[sean: add and use vcpu_cpuid_has()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-03-06 09:59:20 -08:00
Masami Hiramatsu (Google)
f6e2253a61 selftests/ftrace: Add test cases for entry args at function exit
Add kretprobe and function exit probe test cases for checking whether
those can access entry arguments at function exit correctly.

Link: https://lore.kernel.org/all/170952366504.229804.11605173085475141091.stgit@devnote2/

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07 00:27:44 +09:00
Masami Hiramatsu (Google)
25f00e40ce tracing/probes: Support $argN in return probe (kprobe and fprobe)
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.

For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;

 # echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events

Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.

This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.

 # echo 'f target_function%return $arg* $retval' >> dynamic_events

Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07 00:27:34 +09:00
Anup Patel
d8c0831348 KVM: riscv: selftests: Add Zacas extension to get-reg-list test
The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06 20:53:44 +05:30
Anup Patel
d9bb4eca32 KVM: riscv: selftests: Add Ztso extension to get-reg-list test
The KVM RISC-V allows Ztso extension for Guest/VM so add this
extension to get-reg-list test.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06 20:53:37 +05:30
Haibo Xu
d0b94bcbb0 KVM: riscv: selftests: Add sstc timer test
Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06 20:53:29 +05:30
Haibo Xu
812806bd1e KVM: riscv: selftests: Change vcpu_has_ext to a common function
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06 20:53:27 +05:30
Haibo Xu
1e979288c9 KVM: riscv: selftests: Add guest helper to get vcpu id
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06 20:53:23 +05:30
Haibo Xu
38f680c25e KVM: riscv: selftests: Add exception handling support
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().

The code is inspired from that of x86/arm64.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06 20:51:41 +05:30
Jakub Kicinski
e3350ba4a5 selftests: avoid using SKIP(exit()) in harness fixure setup
selftest harness uses various exit codes to signal test
results. Avoid calling exit() directly, otherwise tests
may get broken by harness refactoring (like the commit
under Fixes). SKIP() will instruct the harness that the
test shouldn't run, it used to not be the case, but that
has been fixed. So just return, no need to exit.

Note that for hmm-tests this actually changes the result
from pass to skip. Which seems fair, the test is skipped,
after all.

Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/05f7bf89-04a5-4b65-bf59-c19456aeb1f0@sirena.org.uk
Fixes: a724707976 ("selftests: kselftest_harness: use KSFT_* exit codes")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240304233621.646054-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 19:25:36 -08:00
Daniel Borkmann
0bfc0336e1 selftests/bpf: Fix up xdp bonding test wrt feature flags
Adjust the XDP feature flags for the bond device when no bond slave
devices are attached. After 9b0ed890ac ("bonding: do not report
NETDEV_XDP_ACT_XSK_ZEROCOPY"), the empty bond device must report 0
as flags instead of NETDEV_XDP_ACT_MASK.

  # ./vmtest.sh -- ./test_progs -t xdp_bond
  [...]
  [    3.983311] bond1 (unregistering): (slave veth1_1): Releasing backup interface
  [    3.995434] bond1 (unregistering): Released all slaves
  [    4.022311] bond2: (slave veth2_1): Releasing backup interface
  #507/1   xdp_bonding/xdp_bonding_attach:OK
  #507/2   xdp_bonding/xdp_bonding_nested:OK
  #507/3   xdp_bonding/xdp_bonding_features:OK
  #507/4   xdp_bonding/xdp_bonding_roundrobin:OK
  #507/5   xdp_bonding/xdp_bonding_activebackup:OK
  #507/6   xdp_bonding/xdp_bonding_xor_layer2:OK
  #507/7   xdp_bonding/xdp_bonding_xor_layer23:OK
  #507/8   xdp_bonding/xdp_bonding_xor_layer34:OK
  #507/9   xdp_bonding/xdp_bonding_redirect_multi:OK
  #507     xdp_bonding:OK
  Summary: 1/9 PASSED, 0 SKIPPED, 0 FAILED
  [    4.185255] bond2 (unregistering): Released all slaves
  [...]

Fixes: 9b0ed890ac ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240305090829.17131-2-daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-05 16:19:42 -08:00
Eduard Zingerman
5c2bc5e2f8 selftests/bpf: test case for callback_depth states pruning logic
The test case was minimized from mailing list discussion [0].
It is equivalent to the following C program:

    struct iter_limit_bug_ctx { __u64 a; __u64 b; __u64 c; };

    static __naked void iter_limit_bug_cb(void)
    {
    	switch (bpf_get_prandom_u32()) {
    	case 1:  ctx->a = 42; break;
    	case 2:  ctx->b = 42; break;
    	default: ctx->c = 42; break;
    	}
    }

    int iter_limit_bug(struct __sk_buff *skb)
    {
    	struct iter_limit_bug_ctx ctx = { 7, 7, 7 };

    	bpf_loop(2, iter_limit_bug_cb, &ctx, 0);
    	if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
    	  asm volatile("r1 /= 0;":::"r1");
    	return 0;
    }

The main idea is that each loop iteration changes one of the state
variables in a non-deterministic manner. Hence it is premature to
prune the states that have two iterations left comparing them to
states with one iteration left.
E.g. {{7,7,7}, callback_depth=0} can reach state {42,42,7},
while {{7,7,7}, callback_depth=1} can't.

[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222154121.6991-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-05 16:15:56 -08:00
Kees Cook
1710742994 selftests/exec: Perform script checks with /bin/bash
It seems some shells linked to /bin/sh don't have consistent behavior
with error codes on execution failures. Explicitly use /bin/bash so that
"not found" errors are correctly generated. Repeating the comment from
the test:

/*
 * Execute as a long pathname relative to "/".  If this is a script,
 * the interpreter will launch but fail to open the script because its
 * name ("/dev/fd/5/xxx....") is bigger than PATH_MAX.
 *
 * The failure code is usually 127 (POSIX: "If a command is not found,
 * the exit status shall be 127."), but some systems give 126 (POSIX:
 * "If the command name is found, but it is not an executable utility,
 * the exit status shall be 126."), so allow either.
 */

Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/02c8bf8e-1934-44ab-a886-e065b37366a7@collabora.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-mm@kvack.org
Cc: linux-kselftest@vger.kernel.org
2024-03-05 16:06:01 -08:00
Dongli Zhang
e9da6f08ed KVM: selftests: Explicitly close guest_memfd files in some gmem tests
Explicitly close() guest_memfd files in various guest_memfd and
private_mem_conversions tests, there's no reason to keep the files open
until the test exits.

Fixes: 8a89efd434 ("KVM: selftests: Add basic selftest for guest_memfd()")
Fixes: 43f623f350 ("KVM: selftests: Add x86-only selftest for private memory conversions")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20240227015716.27284-1-dongli.zhang@oracle.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-03-05 13:31:20 -08:00
Kent Gibson
297dc37a1e selftest: gpio: remove obsolete gpio-mockup test
With the removal of the ARCH_NR_GPIOS, the number of available GPIOs
is effectively unlimited, causing the gpio-mockup module load failure
test that overflowed the number of GPIOs to unexpectedly succeed, and
so fail.

The test is no longer relevant so remove it.
Promote the "no lines defined" test so there is still one load
failure test in the basic set.

Fixes: 7b61212f2a ("gpiolib: Get rid of ARCH_NR_GPIOS")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: https://lore.kernel.org/linux-gpio/ZC6OHBjdwBdT4sSb@xpf.sh.intel.com/
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-03-05 20:01:08 +01:00
Michael Ellerman
3fe1eb4dd2 selftests/powerpc: Fix load_unaligned_zeropad build failure
This test is userspace code, but uses some kernel headers via symlinks,
and mocks other headers, in order to test load_unaligned_zeropad().

Currently the test fails to build with:

  In file included from load_unaligned_zeropad.c:26:
  word-at-a-time.h:7:10: fatal error: linux/bitops.h: No such file or directory
      7 | #include <linux/bitops.h>

This is due to the recent changes to the kernel headers.

Fix it by symlinking the new wordpart.h, and creating an empty stub for
bitops.h which is all that's needed.

Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 66a5c40f60 ("kernel.h: removed REPEAT_BYTE from kernel.h")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20240305125644.3315910-1-mpe@ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-05 10:29:15 -08:00
Ido Schimmel
35df2ce896 selftests: forwarding: Make {, ip6}gre-inner-v6-multipath tests more robust
These tests generate various IPv6 flows, encapsulate them in GRE packets
and check that the encapsulated packets are distributed between the
available nexthops according to the configured weights.

Unlike the corresponding IPv4 tests, these tests sometimes fail in the
netdev CI because of large discrepancies between the expected and
measured ratios [1]. This can be explained by the fact that the IPv4
tests generate about 3,600 different flows whereas the IPv6 tests only
generate about 784 different flows (potentially by mistake).

Fix by aligning the IPv6 tests to the IPv4 ones and increase the number
of generated flows.

[1]
 [...]
 # TEST: ping                                                          [ OK ]
 # INFO: Running IPv6 over GRE over IPv4 multipath tests
 # TEST: ECMP                                                          [FAIL]
 # Too large discrepancy between expected and measured ratios
 # INFO: Expected ratio 1.00 Measured ratio 1.18
 [...]

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 09:18:17 -08:00
Ido Schimmel
f0008b0497 selftests: forwarding: Make VXLAN ECN encap tests more robust
These tests sometimes fail on the netdev CI because the expected number
of packets is larger than expected [1].

Make the tests more robust by specifically matching on VXLAN
encapsulated packets and allowing up to five stray packets instead of
just two.

[1]
 [...]
 # TEST: VXLAN: ECN encap: 0x00->0x00                                  [FAIL]
 # v1: Expected to capture 10 packets, got 13.
 # TEST: VXLAN: ECN encap: 0x01->0x01                                  [ OK ]
 # TEST: VXLAN: ECN encap: 0x02->0x02                                  [ OK ]
 # TEST: VXLAN: ECN encap: 0x03->0x02                                  [ OK ]
 [...]

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 09:18:13 -08:00
Ido Schimmel
dfbab74044 selftests: forwarding: Make vxlan-bridge-1q pass on debug kernels
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].

Fix by increasing the ageing time.

[1]
 # ./vxlan_bridge_1q.sh
 [...]
 INFO: learning vlan 10
 TEST: VXLAN: flood before learning                                  [ OK ]
 TEST: VXLAN: show learned FDB entry                                 [ OK ]
 TEST: VXLAN: learned FDB entry                                      [FAIL]
         swp4: Expected to capture 0 packets, got 10.
 RTNETLINK answers: No such file or directory
 TEST: VXLAN: deletion of learned FDB entry                          [ OK ]
 TEST: VXLAN: Ageing of learned FDB entry                            [FAIL]
         swp4: Expected to capture 0 packets, got 10.
 TEST: VXLAN: learning toggling on bridge port                       [ OK ]
 [...]

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 09:18:10 -08:00
Ido Schimmel
4aca9eae6f selftests: forwarding: Make tc-police pass on debug kernels
The test configures a policer with a rate of 80Mbps and expects to
measure a rate close to it. This is a too high rate for debug kernels,
causing the test to fail [1].

Fix by reducing the rate to 10Mbps.

[1]
 # ./tc_police.sh
 TEST: police on rx                                                  [FAIL]
         Expected rate 76.2Mbps, got 29.6Mbps, which is -61% off. Required accuracy is +-10%.
 TEST: police on tx                                                  [FAIL]
         Expected rate 76.2Mbps, got 30.4Mbps, which is -60% off. Required accuracy is +-10%.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 09:18:07 -08:00
Ido Schimmel
748d27447d selftests: forwarding: Parametrize mausezahn delay
The various multipath tests use mausezahn to generate different flows
and check how they are distributed between the available nexthops. The
tool is currently invoked with an hard coded transmission delay of 1 ms.
This is unnecessary when the tests are run with veth pairs and
needlessly prolongs the tests.

Parametrize this delay and default it to 0 us. It can be overridden
using the forwarding.config file. On my system, this reduces the run
time of router_multipath.sh by 93%.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 09:18:04 -08:00
Ido Schimmel
7b2d64f933 selftests: forwarding: Remove IPv6 L3 multipath hash tests
The multipath tests currently test both the L3 and L4 multipath hash
policies for IPv6, but only the L4 policy for IPv4. The reason is mostly
historic: When the initial multipath test was added
(router_multipath.sh) the IPv6 L4 policy did not exist and was later
added to the test. The other multipath tests copied this pattern
although there is little value in testing both policies.

Align the IPv4 and IPv6 tests and only test the L4 policy. On my system,
this reduces the run time of router_multipath.sh by 89% because of the
repeated ping6 invocations to randomize the flow label.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 09:18:00 -08:00
Pedro Tammela
dcfaf1f758 selftests/tc-testing: require an up to date iproute2 for blockcast tests
Add the dependsOn test check for all the mirred blockcast tests.
It will prevent the issue reported by LKFT which happens when an older
iproute2 is used to run the current tdc.

Tests are skipped if the dependsOn check fails.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20240229143825.1373550-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04 19:30:57 -08:00
Prabhav Kumar Vaish
fb0f023081 selftests: net: Correct couple of spelling mistakes
Changes :
	- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
	- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh

Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04 18:33:47 -08:00
Zi Yan
fc4d182316 mm: huge_memory: enable debugfs to split huge pages to any order
It is used to test split_huge_page_to_list_to_order for pagecache THPs. 
Also add test cases for split_huge_page_to_list_to_order via both debugfs.

[ziy@nvidia.com: fix issue discovered with NFS]
  Link: https://lkml.kernel.org/r/262E4DAA-4A78-4328-B745-1355AE356A07@nvidia.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-9-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-04 17:01:20 -08:00
Javier Carrasco
21992241cd selftests: damon: add access_memory to .gitignore
This binary is missing in the .gitignore and stays as an untracked file.

Link: https://lore.kernel.org/r/20240214-damon_selftest_gitignore-v1-1-f517d0f9f783@gmail.com
Link: https://lkml.kernel.org/r/20240221211148.46522-3-sj@kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Singed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Closes: https://lore.kernel.org/all/AS8P193MB1285C963658008F1B2702AF7E4792@AS8P193MB1285.EURP193.PROD.OUTLOOK.COM/
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-04 17:01:16 -08:00
Vincenzo Mezzela
fd2f556c4f selftest: damon: fix minor typos in test logs
Patch series "selftests/damon: misc fixes".

Misc fixes for DAMON selftets on behalf of the original authors.


This patch (of 2):

This patch resolves a spelling error in the test log, preventing potential
confusion.

It is submitted as part of my application to the "Linux Kernel Bug Fixing
Spring Unpaid 2024" mentorship program of the Linux Foundation.

Link: https://lore.kernel.org/r/20240204122523.14160-1-vincenzo.mezzela@gmail.com
Link: https://lkml.kernel.org/r/20240221211148.46522-2-sj@kernel.org
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-04 17:01:16 -08:00
Kui-Feng Lee
93bc28d859 selftests/bpf: Test struct_ops maps with a large number of struct_ops program.
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.

Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-03-04 14:09:24 -08:00
Laura Nao
5d94da7ff0 kselftest: Add basic test for probing the rust sample modules
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.

Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Sergio Gonzalez Collado <sergio.collado@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-03-04 13:13:04 -07:00
Song Yoong Siang
01031fd473 selftests/bpf: xdp_hw_metadata reduce sleep interval
In current ping-pong design, xdp_hw_metadata will wait until the packet
transmission completely done, then only start to receive the next packet.

The current sleep interval is 10ms, which is unnecessary large. Typically,
a NIC does not need such a long time to transmit a packet. Furthermore,
during this 10ms sleep time, the app is unable to receive incoming packets.

Therefore, this commit reduce sleep interval to 10us, so that
xdp_hw_metadata is able to support periodic packets with shorter interval.
10us * 500 = 5ms should be enough for packet transmission and status
retrieval.

Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20240303083225.1184165-2-yoong.siang.song@intel.com
2024-03-04 15:01:59 +01:00
Andrii Nakryiko
8f79870ec8 selftests/bpf: Extend uprobe/uretprobe triggering benchmarks
Settle on three "flavors" of uprobe/uretprobe, installed on different
kinds of instruction: nop, push, and ret. All three are testing
different internal code paths emulating or single-stepping instructions,
so are interesting to compare and benchmark separately.

To ensure `push rbp` instruction we ensure that uprobe_target_push() is
not a leaf function by calling (global __weak) noop function and
returning something afterwards (if we don't do that, compiler will just
do a tail call optimization).

Also, we need to make sure that compiler isn't skipping frame pointer
generation, so let's add `-fno-omit-frame-pointers` to Makefile.

Just to give an idea of where we currently stand in terms of relative
performance of different uprobe/uretprobe cases vs a cheap syscall
(getpgid()) baseline, here are results from my local machine:

$ benchs/run_bench_uprobes.sh
base           :    1.561 ± 0.020M/s
uprobe-nop     :    0.947 ± 0.007M/s
uprobe-push    :    0.951 ± 0.004M/s
uprobe-ret     :    0.443 ± 0.007M/s
uretprobe-nop  :    0.471 ± 0.013M/s
uretprobe-push :    0.483 ± 0.004M/s
uretprobe-ret  :    0.306 ± 0.007M/s

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240301214551.1686095-1-andrii@kernel.org
2024-03-04 14:40:24 +01:00
Geliang Tang
4cc5cc7ca0 selftests: mptcp: userspace pm get addr tests
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
b055671b39 selftests: mptcp: add token for get_addr
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:

	pm_nl_ctl get $id

This patch adds token argument for it to support userspace PM:

	pm_nl_ctl get $id token $token

If 'token $token' is passed to get_addr(), copy it into the kernel netlink.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
38f027fca1 selftests: mptcp: dump userspace addrs list
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
2d0c1d27ea selftests: mptcp: add mptcp_lib_check_output helper
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.

This helper will be used for userspace dump addresses tests.

Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
950c332125 selftests: mptcp: add token for dump_addr
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:

        pm_nl_ctl dump

This patch adds token argument for it to support userspace PM:

        pm_nl_ctl dump token $token

If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00