frwr_wp_create() creates the singleton Memory Region used to encode
padding for Write chunks whose payload length is not XDR-aligned. Its
failure paths return a negative errno and leave ep->re_write_pad_mr set
to NULL.
rpcrdma_xprt_connect() currently ignores that return value. If
frwr_wp_create() fails after the rest of the connection setup succeeds,
xprt_rdma_connect_worker() treats the connection attempt as successful
and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned
receive page length reaches rpcrdma_encode_write_list(), passes the NULL
write-pad MR to encode_rdma_segment(), and dereferences it.
This is locally triggerable on an NFS/RDMA client after a connect or
reconnect hits a local MR allocation, DMA-map, MR-map, or post-send
failure; a remote peer alone cannot force the local MR setup failure.
Check the return value and fail the connect as -ENOTCONN, matching the
adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the
normal reconnect path retry.
Fixes: 21037b8c22 ("xprtrdma: Provide a buffer to pad Write chunks of unaligned length")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client
before returning the new rdma_cm_id to rpcrdma_ep_create(). However
rpcrdma_ep_create() currently stores that pointer in ep->re_id only
after rpcrdma_create_id() returns.
A local administrator can race an NFS/RDMA mount against RDMA device
removal. If rpcrdma_remove_one() observes the just-registered
notification before rpcrdma_ep_create() assigns ep->re_id,
rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL).
The tracepoint dereferences id->device->name and copies
id->route.addr.dst_addr, so the callback can crash the kernel with a
NULL pointer dereference.
Store the rdma_cm_id in ep->re_id immediately before publishing
ep->re_rn. The existing error path still destroys the id directly if
registration fails; ep is then freed by the caller without using
ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create().
Fixes: 3f4eb9ff92 ("xprtrdma: Handle device removal outside of the CM event handler")
Assisted-by: kres:openai-gpt-5
Signed-off-by: Chris Mason <clm@meta.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get ->3
RDMA_CM_EVENT_DISCONNECTED ep_put ->2
rpcrdma_xprt_drain() ep_put ->1
rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy)
The connect-time get in rpcrdma_xprt_connect(), taken just before
rpcrdma_post_recvs() "while there are outstanding Receives," is
balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has
no get to consume, so its put drops the count to 1 and the drain
put then frees the ep while rpcrdma_xprt_disconnect() still holds a
pointer to it.
Fix by dispatching on the prior re_connect_status via xchg(): for
prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with
no put; for prev == 1 call rpcrdma_force_disconnect() and return.
The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED
event -- reliably delivered when rdma_disconnect() is called on a
still-connected cm_id -- to balance the ESTABLISHED get;
rpcrdma_xprt_drain() continues to balance only that connect-time
get. Any other prior value means teardown is already in flight.
Fixes: 2acc5cae29 ("xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed")
Assisted-by: kres:claude-opus-4-7
Signed-off-by: Chris Mason <clm@meta.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
rpcrdma_buffer_get() and rpcrdma_buffer_put() both take rb_lock to
pop/push from the rb_send_bufs free list. Under high I/O concurrency
(e.g., nconnect=N with small random writes), this spinlock is contended
between the request submission path and the transport completion path.
Replace the list_head with an llist_head. The put side uses
lockless llist_add(), which is safe for concurrent producers. The
get side retains the spinlock to satisfy the llist single-consumer
contract portably; submitters continue to serialize there. Completion
handlers returning buffers no longer contend on rb_lock, eliminating
contention on the return path.
rb_lock remains for the MR free list and the tracking lists used
during setup and teardown. rb_free_reps already uses llist_head, so
the llist idiom is established in this structure. The precedent is the
data structure, not the locking: rb_free_reps serializes its single
consumer through the re_receiving gate in rpcrdma_post_recvs, whereas
rb_send_bufs serializes its consumer with rb_lock. Both satisfy the
llist single-consumer contract.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
This is the devicetree schema for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family. It also
updates the MAINTAINERS file to include the new driver.
EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels and
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2 and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-1-cef809af5c19@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some Qualcomm PCIe devices (WCN6855/WCN7850 WiFi cards, SDX62/SDX65 modems)
do not properly support Secondary Bus Reset (SBR).
Testing confirms this is device-specific, not deployment-specific:
MediaTek MT7925e successfully uses bus reset through the same passive
M.2-to-PCIe adapters where Qualcomm devices fail, proving PERST# is
properly wired through the adapters.
Prevent use of Secondary Bus Reset for these devices.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20260609163649.319755-4-jtornosm@redhat.com
'nvmem' unlike 'nvmem-cells', consumes references to just a single
phandle with no arguments (i.e. with 0 cells).
Constrain the schema to enforce that, so that the number of such
single-item entries can then be regulated by IP block-specific YAMLs.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260610-topic-nvmem_schema_warning_fix-v1-1-4029becf13f9@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Restore allowing writing EPP of 0 when in performance mode in the
amd-pstate driver which was unnecessarily disallowed by one of the
recent updates (Mario Limonciello)
- Remove stale documentation of the epp_cached field in struct
amd_cpudata that has been dropped recently (Zhan Xusheng)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmopns8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1nuQH/1WWr4Rm9BV07e+sqK0X62fzV7+TpM8N
Ap7PveJ3qh7LEh2Mh4CiCyycSR4XfAZrKE0FGi7YGbxhcTsG93nlpyzz0dCPyYzM
qJ4lpbLUqt9gu4BknmTAYAIBResZSjYyA1bB7eghcKQzuAXj447PkNvG5Pbij5KS
wLuBPnV1eLtzpdXitg9OHFitu5KBKe/DH8hlsomJkkXN/8rAKIFsfihHw+52r/Hh
fwxt4QPj8e72kZbeAC+YELY40J3Cg8pW7w4G6NbGPFU64FZWwO42a2j+j1PW5unP
lYjNlf0PCQ4Ebi6Z2j24LIlp038fPJcYjV2BJ24PlY4fiN1OYoKZnLo=
=QUn3
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address some remaining fallout after introducing dynamic EPP
support in the amd-pstate driver during the current development cycle:
- Restore allowing writing EPP of 0 when in performance mode in the
amd-pstate driver which was unnecessarily disallowed by one of the
recent updates (Mario Limonciello)
- Remove stale documentation of the epp_cached field in struct
amd_cpudata that has been dropped recently (Zhan Xusheng)"
* tag 'pm-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix setting EPP in performance mode
cpufreq/amd-pstate: drop stale @epp_cached kdoc
Avoid calls to strcpy().
The lengths of the strings have been used for the kzalloc(), replace
the strcpy() calls with memcpy() using the known lengths.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260608185121.22331-1-david.laight.linux@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Provide good/ and bad/ DTS and YAML fixtures plus a small runner that
feeds them to dt-check-style and diffs the output against expected
text files. Wired into a new top-level dt_style_selftest make target
so the suite can be exercised independently of the full tree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/80fec5d2cfcdee0f9c5e2d4921ebbd4115d392b7.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Run dt-check-style as part of dt_binding_check_one. The recipe wraps
the tool with scripts/jobserver-exec so worker count follows the GNU
make jobserver -- `make -j N dt_binding_check` constrains the checker
to N workers rather than spawning one per CPU.
Default mode (relaxed) is zero-violation on the current tree, so this
does not introduce new warnings into make dt_binding_check. Stricter
rules are available via --mode=strict (eg. for use by checkpatch.pl in
a future series).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/a14fdbded0acdc4fef1c1278100f2f4c6a93a488.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
main() called JobserverExec().run() and discarded its return value,
then the script exited with the implicit status 0. As a result, any
Makefile that wired a build step through jobserver-exec saw the step
silently succeed even when the wrapped command had failed.
Two in-tree callers were affected:
Documentation/devicetree/bindings/Makefile
cmd_chk_style runs a python checker via jobserver-exec and uses
"&& touch $@ || true" so failures leave the stamp file untouched
and the next make rerun reports them again. The swallowed exit
code made the stamp file get created even on failure, caching the
failed run and hiding the reported issues until the inputs change.
scripts/Makefile.vmlinux_o
cmd_gen_initcalls_lds runs scripts/generate_initcall_order.pl via
jobserver-exec; a perl failure was masked by the wrapper.
Return the subprocess exit code from main() and pass it to sys.exit()
so the wrapped command's status reaches make.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/660368ca16e2d3845577a9fd157d2f37f0e09e85.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a Python tool that checks DTS coding style on examples in YAML
binding files and on .dts/.dtsi/.dtso source files. Rules are kept in
a small declarative registry, each tagged 'relaxed' (default; must be
zero-violation on the current tree) or 'strict' (opt-in for new
submissions). Promoting a rule from strict to relaxed is a one-line
edit once the tree is clean.
Relaxed mode covers trailing whitespace, tab characters in YAML
examples, mixed tab+space indents, and missing tabs in .dts files.
Strict adds indent unit and consistency checks, blank-line placement,
sibling address ordering, "compatible" and "reg" ordering, and unused
labels.
The tool reads file paths from @argfile and parallelises across CPUs
via -j N. With no -j given it picks up $PARALLELISM (set by
scripts/jobserver-exec from the GNU make jobserver) and falls back to
os.cpu_count() otherwise. Running as one Python invocation amortises
the ruamel.yaml import across the whole tree -- ~2s on a 32-CPU host
vs ~28s sequential.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/224923f3d1c73ff55cebb3e0796f119e32c1bb43.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing
bogus memset()"), added a check in hid_report_raw_event() to reject
reports if the received data size is smaller than expected. This was
intended to prevent OOB errors by no longer allowing zeroing-out of
shorter reports due to the lack of buffer size information.
However, this leads to regressions in hid_report_raw_event(), where
shorter than expected reports are rejected, even though their buffers
are sufficiently large to be zero-padded.
To solve this issue, Benjamin introduced a safer alternative in commit
206342541f ("HID: core: introduce hid_safe_input_report()"), which
forwards the buffer size and allows hid_report_raw_event() to safely
zero-pad the data.
Convert uhid to use hid_safe_input_report() and pass UHID_DATA_MAX as
the buffer size. This prevents the reported regressions [1], allowing
hid core to zero-pad the shorter reports safely as expected.
Cc: stable@vger.kernel.org
Fixes: 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing bogus memset()")
Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On some boards, the SPI controller is limited to half-duplex and the driver
fails spamming "ads7846 spi2.1: spi_sync --> -22". Restore half-duplex
support with multiple SPI transfers.
Fixes: 9c9509717b ("Input: ads7846 - convert to full duplex")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/20260419161848.825831-2-aaro.koskinen@iki.fi
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In __of_find_n_match_cpu_property(), checking the variable ac for 0 won't
prevent a possible overflow when multiplying it by sizeof(*cell). Besides,
of_read_number() (called in the *for* loop) can't return correct result if
that variable (which equals the #address-cells prop's value) exceeds 2, so
additionally checking for that seems logical...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: f3cea45a77 ("of: Fix iteration bug over CPU reg properties")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Link: https://patch.msgid.link/0c7bf7e9-887c-42d5-bcfb-0ba7fe1e70b6@auroraos.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document common video interface device properties, such as rotation and
orientation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260531092924.12929-2-clamor95@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a bullet point to the libperf ABI TODO explaining the code
simplification benefit of widening struct perf_cpu.cpu from int16_t
to int: the narrow type forces defensive truncation checks at every
boundary where wider CPU indices are narrowed, and values > 32767
silently wrap to negative numbers (two's complement), bypassing
bounds validation without them.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
build_id__snprintf() and hwmon_pmu__read_events() accumulate formatted
output via snprintf(), which returns the would-have-been-written count
on truncation. In build_id__snprintf(), this inflates the return
value beyond the buffer size. In hwmon_pmu__read_events(), len
overshoots out_buf_len and the next 'out_buf_len - len' underflows.
Switch both to scnprintf() which returns actual bytes written.
In build_id__snprintf(), also tighten the loop guard from
'offs < bf_size' to 'offs + 1 < bf_size': since scnprintf() returns
at most size-1, offs never reaches bf_size, and the original condition
would spin doing zero-byte writes once the buffer fills.
Fixes: fccaaf6fbb ("perf build-id: Change sprintf functions to snprintf")
Fixes: 53cc0b351e ("perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hists__scnprintf_title() accumulates formatted output into a buffer
using scnprintf() for all filter clauses except the UID filter, which
uses snprintf(). If the buffer fills up and snprintf() returns more
than the remaining space, printed exceeds size and the next 'size -
printed' underflows, causing later scnprintf() calls to write past
the buffer.
Switch the UID filter clause to scnprintf() to match the rest of the
function.
Fixes: 25c312dbf8 ("perf hists: Move hists__scnprintf_title() away from the TUI code")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both functions accumulate formatted output via ret += snprintf(buf + ret,
size - ret, ...). If the buffer is too small and snprintf() returns more
than the remaining space, ret exceeds size and the next 'size - ret'
underflows, causing snprintf() to write past the buffer end.
Switch to scnprintf() which returns the actual number of bytes written,
making the accumulation safe.
Fixes: 7b612e291a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Song Liu <song@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
open() calls in dso.c and symbol-elf.c omit O_CLOEXEC, which leaks
file descriptors to child processes spawned during symbol resolution
(e.g., addr2line, objdump). This can exhaust the fd limit during
long profiling sessions or when processing many DSOs.
Add O_CLOEXEC to all open() calls in both files (12 call sites).
Fixes: cdd059d731 ("perf tools: Move dso_* related functions into dso object")
Fixes: e5a1845fc0 ("perf symbols: Split out util/symbol-elf.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
timehist_print_idlehist_callchain() calls rb_first_cached() on
sorted_root, but the sort function (callchain_param.sort) populates it
via rb_insert_color() on the plain rb_root member — not the cached
variant. This means rb_leftmost is never set, so rb_first_cached()
always returns NULL and the entire callchain summary is silently
dropped from --idle-hist output.
The original code in ba957ebb54 ("perf sched timehist: Show
callchains for idle stat") was correct — it used struct rb_root and
rb_first(). The bug was introduced when sorted_root was converted to
rb_root_cached without converting the sort insertion path to use
rb_insert_color_cached().
Use rb_first(&root->rb_root) to match how the tree was populated.
Fixes: cb4c13a513 ("perf sched: Use cached rbtrees")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
timehist_skip_sample() reads prio from untrusted tracepoint data via
perf_sample__intval(sample, "prev_prio") without bounds validation.
A crafted perf.data with prev_prio >= MAX_PRIO (140) causes test_bit()
to read past the end of the prio_bitmap, which is only MAX_PRIO bits.
Add a prio >= 0 guard before the test_bit() call and skip out-of-range
values (>= MAX_PRIO) that can never match the user's filter set.
The original prio != -1 already let all negatives other than -1 through
(after an undefined-behavior bitmap read); the new prio >= 0 guard
preserves that pass-through behavior — negative means "no priority
info", so the event is shown unfiltered — while fixing the OOB.
Values >= MAX_PRIO are skipped because they cannot be represented in
the filter bitmap.
Fixes: 9b3a48bbe2 ("perf sched timehist: Add --prio option")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pre-existing issue discovered by sashiko-bot.
mock_get_lsa() and mock_set_lsa() validate the requested LSA range with
"offset + length > LSA_SIZE". Both offset and length are u32 and, in
mock_get_lsa(), both are taken directly from the user-supplied payload.
The addition is evaluated modulo 2^32, so a large offset combined with a
small length wraps around and passes the check.
Rewrite the checks to first bound offset, then compare length against the
remaining LSA size.
Suggested-by: sashiko-bot
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Link: https://lore.kernel.org/linux-cxl/20260605143748.235271F00893@smtp.kernel.org/
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Several mock mailbox handlers access input payload fields before
verifying that cmd->size_in is large enough for the corresponding
structure.
To ensure invalid commands are rejected before any payload data is
consumed, add missing size checks and move existing checks ahead of
the first payload field access.
[dj: Updated commit log per Alison's comments. ]
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Fixes: d1dca858f0 ("cxl/test: Add generic mock events")
Fixes: f6448cb5f2 ("tools/testing/cxl: add firmware update emulation to CXL memdevs")
Fixes: e77e9c1079 ("cxl/test: Add Get Feature support to cxl_test")
Link: https://lore.kernel.org/linux-cxl/20260605143748.235271F00893@smtp.kernel.org/
Suggested-by: sashiko-bot
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A comment in drivers/cxl/port.c refers to CONFIG_PROVE_CXL_LOCKING,
which was removed in commit 38a34e1076 ("cxl: Drop
cxl_device_lock()"). That commit switched CXL subsystem locking to
custom lock classes, which can be validated via the standard
CONFIG_PROVE_LOCKING option. Update the comment to reflect this.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260610042101.222349-1-enelsonmoore@gmail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Use an additional label so that a bit of exception handling can be better
reused at the end of this function implementation.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/a24a6bd9-a8e1-423c-9eae-b9ab08a8de81@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When rdma_resolve_addr() is invoked with a broadcast destination on an
IPoIB interface, is_dst_local() inspects the resolved route and
incorrectly concludes that the address is local. As a result, the
resolution fails with -ENODEV.
The issue stems from using '&' to compare rt_type with RTN_LOCAL. The
RTN_* values form a sequential enum, not a bitmask (RTN_LOCAL=2,
RTN_BROADCAST=3). Thus, "rt_type & RTN_LOCAL" yields a non-zero result
for a broadcast route as well.
Replace '&' with '==' when comparing rt_type against RTN_LOCAL.
Link: https://patch.msgid.link/r/20260609-fix-rdma-resolve-addr-v1-1-449b8b4e6c09@nvidia.com
Cc: stable@vger.kernel.org
Fixes: c31e4038c9 ("RDMA/core: Use route entry flag to decide on loopback traffic")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
bnxt_re_debugfs_add_pdev() allocates per-file private data for the CC
configuration debugfs entries. The loop that initializes those entries
uses rdev->cc_config_params immediately, so allocation failure would lead
to NULL pointer dereferences while setting up debugfs.
Debugfs is best-effort. If the CC configuration private data cannot be
allocated just stop.
Link: https://patch.msgid.link/r/20260606040644.13-1-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Explicitly assigning .driver_data in drivers that don't use this member
is silly and a bit irritating. Drop these. Also simplify the list
terminator entry to be just empty to match what most other device_id
tables do.
There is no changed semantic, not even a change in the compiled result.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/f987c14dea1d3236d3889e5cf96c01eef6a2445d.1781016727.git.u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove the unused LIST_HEAD(res) declaration from rcar_pcie_hw_enable().
The macro instantiation defines an unused 'struct list_head res' variable,
which conflicts with a valid resource loop-local 'struct resource *res'
declaration further down in the function, triggering a compiler variable
shadowing warning:
drivers/pci/controller/pcie-rcar-host.c:357:34: warning: declaration of 'res' shadows a previous local [-Wshadow]
357 | struct resource *res = win->res;
Fixes: ce351636c6 ("PCI: rcar: Add suspend/resume")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260521091256.15737-1-prabhakar.mahadev-lad.rj@bp.renesas.com
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
Fixes: 75e16c8ce2 ("HID: hid-goodix: Add Goodix HID-over-SPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Context-based TLB invalidation currently selects only scheduling-active
exec queues via q->ops->active(). During rebind flows, queues may be
suspended (or transitioning through resume) while still owning valid
translations, causing them to be skipped from invalidation and leading
to missed TLB invalidations on LR rebinds.
The underlying issue is a TOCTOU: q->guc->state bits are flipped lock-free
from enable_scheduling(), disable_scheduling{,_deregister}(), the
suspend/resume sched-msg handlers, handle_sched_done(), and
guc_exec_queue_stop(); nothing in send_tlb_inval_ctx_ppgtt() serializes
against them, so any state-based predicate can race.
Include all the registered queues so that TLB invalidations are not
missed. This is race-free because list membership on vm->exec_queues.list
is stable under vm->exec_queues.lock held by the caller. The performance
impact is expected to be minimal and harmless. If it does turn out to be
a concern, we can come back with a race-safe solution to ignore certain
queues.
Fixes: 6cdaa5346d ("drm/xe: Add context-based invalidation to GuC TLB invalidation backend")
Assisted-by: Claude:claude-opus-4.6
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260608162745.338725-2-tilak.tirumalesh.tangudu@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit aa625e1e9f)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Hardware errors should be logged with HW_ERR prefix. Make them
consistent with existing logs.
Fixes: 01aab7e1c9 ("drm/xe/xe_hw_error: Add support for PVC SoC errors")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-5-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit ad60a618c4)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
cleanup_node_param() is not registered for previous node in case of counter
allocation failure, which results in stale memory of previous node that
isn't cleaned up on unwind. Add per node cleanup action which guarantees
cleanup on unwind and also simplifies the cleanup logic.
Fixes: b40db12b54 ("drm/xe/xe_drm_ras: Add support for XE DRM RAS")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-4-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 67fc5543d8)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
cleanup_node_param() is not registered for previous node in case of counter
allocation failure, which results in stale memory of previous node that
isn't cleaned up on unwind. Fix this using drm managed allocation, which is
guaranteed to be cleaned up on unwind.
Fixes: b40db12b54 ("drm/xe/xe_drm_ras: Add support for XE DRM RAS")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-3-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 58d77c77ea)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e ("drm/xe/display: Make display
suspend/resume work on discrete").
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7904
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/6150
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515160920.1082842-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7c3eb9f475)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Add support for the HORI Wireless Switch Pad (vendor 0x0f0d, product
0x00f6), a licensed third-party Nintendo Switch Pro Controller.
The controller reports controller type 0x06 (vs 0x03 for first-party
Pro Controllers) and has the following quirks:
- SPI flash calibration data is incompatible; use default stick
calibration values instead.
- X and Y button bits are swapped compared to first-party controllers;
add a dedicated button mapping table.
- Rumble and IMU enable may timeout (no vibration motor in hardware);
treat as non-fatal for licensed controllers.
Tested over Bluetooth on NixOS with kernel 7.0.5 and 7.0.10:
- All 14 buttons map correctly
- Player LED sets on connect
- Sticks report correctly with default calibration
- IMU/gyro data streams at 60Hz
- D-pad reports on ABS_HAT0X/HAT0Y
Device information:
Bluetooth name: Lic Pro Controller
Bluetooth HID: 0005:0F0D:00F6
Assisted-by: Kiro:Auto [Amazon Kiro IDE]
Signed-off-by: Hector Zelaya <hector@hectorzelaya.dev>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The INGENIC 17EF:6161 firmware on the Lenovo Yoga Book 9 14IAH10
does not clear stale contact slots when fingers are lifted. Each
HID report contains up to 10 finger slots, but only the first
ContactCount slots represent valid contacts; the remaining slots
retain TipSwitch=1 with positions from previous touches.
Raw HID capture confirms this: across a 60-second capture with
repeated multi-finger gestures, 90% of frames had more TipSwitch=1
slots than the reported ContactCount. The ContactCount field itself
is always accurate.
Add MT_QUIRK_CONTACT_CNT_ACCURATE to the MT_CLS_YOGABOOK9I class so
the driver stops processing slots once ContactCount valid contacts
have been consumed, discarding the stale ghost entries per HID
specification section 17. MT_QUIRK_NOT_SEEN_MEANS_UP (already in
the class) ensures that any slot skipped by this guard is released
via INPUT_MT_DROP_UNUSED at frame sync.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Tested-by: Dave Carey <carvsdriver@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Two call sites free bitmaps without NULLing the pointer, risking
double-free if the structure is reused or cleanup is called twice:
- mmap__munmap(): map->affinity_mask.bits
- record__mmap_cpu_mask_free(): mask->bits
Set each pointer to NULL after bitmap_free().
Fixes: 8384a2600c ("perf record: Adapt affinity to machines with #CPUs > 1K")
Fixes: f466e5ed6c ("perf record: Extend --threads command line option")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
NFT_META_BRI_IIFHWADDR declares its destination register with
len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to
two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does
memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and
leaving the upper 2 bytes of the second register as uninitialised
nft_do_chain() stack. A downstream load of that register span leaks
those stale bytes to userspace.
Zero the second register before the memcpy so the full declared span is
written.
Fixes: cbd2257dc9 ("netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When updating an existing effect, the effect type from the last created
effect was sent to the device instead of the updated one.
This caused incorrect reports when a game creates multiple different
effects and updates only one that is not the last created.
Fixes FFB in multiple games that create multiple simultaneous effects
(Forza Horizon 5/6).
Fixes: 224ee88fe3 ("Input: add force feedback driver for PID devices")
Cc: stable@vger.kernel.org
Tested-by: Oliver Roundtree <oroundtree1@gmail.com>
Co-developed-by: Ryno Kotzé <lemon.xah@gmail.com>
Signed-off-by: Ryno Kotzé <lemon.xah@gmail.com>
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Suggested-by: Florian Westphal <fw@strlen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set.
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Fixes: c078ca3b0c ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.
This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).
Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.
BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265)
Fixes: 7eb9282cd0 ("netfilter: ipt_LOG/ip6t_LOG: add option to print decoded MAC header")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving the raw percpu pointer in userspace.
Copy only the fixed entry prefix before counters from the kernelized rule
blob, then copy the sanitized counter snapshot into the counter field.
Apply this ordering to the IPv4, IPv6, and ARP native and compat
get-entries implementations so a fault cannot expose the internal percpu
counter pointer.
Fixes: 71ae0dff02 ("netfilter: xtables: use percpu rule counters")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops.
Fixes: f587de0e2f ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
