Extend the tegra264_mc_clients table to cover the full set of memory
clients exposed by the SoC. The client name is used for MC fault
reporting. Clients managed by the BPMP bandwidth manager additionally
carry their bpmp_id and type.
Entries in tegra264_mc_clients[] are sorted to match the order of
the override and security register offsets used in previous SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://patch.msgid.link/20260518124306.2071481-4-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Some MC clients are present in tegra264_mc_clients[] only for
fault-log naming and have no .bpmp_id or .type assigned. Skip
forwarding bandwidth requests to BPMP for such clients in
tegra264_mc_icc_set().
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://patch.msgid.link/20260518124306.2071481-2-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
simple_mux_control_put() rejects values greater than e->items, but
enum control values are zero based. For the two-entry mux used by this
driver, valid values are 0 and 1, so value 2 must be rejected as well.
Accepting e->items can store an invalid mux state, pass it to the GPIO
setter, and pass it on to the DAPM mux update path where it is used as
an index into the enum text array.
Use the same >= e->items check used by the ASoC enum helpers.
Fixes: 342fbb7578 ("ASoC: add simple-mux")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Extend the test coverage by giving guidelines to verify the CMP bit acts
according to our expectations.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The current locking implementation allows to select a power of two
number of blocks, which is going to be the protected amount, as well as
telling whether this is the data at the top (end of the device) or the
bottom (beginning of the device). This means at most we can cover half
of the device or the entire device, but nothing in between.
The complement feature allows a much finer grain of configuration, by
allowing to invert what is considered locked and unlocked.
Add support for this feature. The only known position for the CMP bit is
bit 6 of the configuration register.
The locking and unlocking logics are kept unchanged if the CMP bit is
unavailable. Otherwise, once the regular logic has been applied, we
check if we already found an optimal configuration. If not, we try with
the CMP bit set. If the coverage is closer to the request, we use it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
As recently raised on the mailing list, it may be useful to propose a
list of steps to go through in order to prove the devices have been
described correctly, especially since all the block protection
information is not stored in any kind of table and is instead filled
manually by developers.
Use the debugfs output to ease the comparison between expectations and
reality.
[rdunlap@infradead.org: fix build warning]
Link: https://lore.kernel.org/linux-mtd/20260526172341.773398-1-rdunlap@infradead.org/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The debounce bit sets a bypass on the debounce rather than enabling it,
as such the current polarity of the debounce is set incorrectly. Invert
the polarity to correct this.
Fixes: d5282a5392 ("pinctrl: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Returning directly if the regmap_update_bits() fails causes a pm runtime
reference to be leaked, let things run to the end of the function
instead.
Fixes: e52c741907 ("pinctrl: cirrus: cs42l43: use new GPIO line value setter callbacks")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Each GPIO bank has two 32-bit MFP registers: MFPL covering pins 0-7
at the bank base offset, and MFPH covering pins 8-15 at base offset+4.
ma35_pinctrl_parse_groups() computed the register address without
accounting for this split, so any pin with an index >= 8 within its
bank was written to the wrong register.
Also fix the pin descriptor table in pinctrl-ma35d1.c: switch from
sequential to 16-per-bank pin numbering, add missing PC8-PC11 pins
and their mux options, and remove the duplicate PN10-PN15 entries.
Fixes: f805e35631 ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The test's set_capability() function needs to set CAP_CHECKPOINT_RESTORE
(bit 40). But libcap's API (cap_set_flag) didn't support cap 40 when the
test was written - it was too new. So the author worked around it by
casting cap_t to an assumed internal layout.
This worked with older libcap versions where cap_t pointed directly to
that layout. Newer libcap internally restructured its cap_t opaque type.
Since 2.43, libcap natively supports CAP_CHECKPOINT_RESTORE, workaround
is no longer needed. The fix directly uses the library interface.
Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
Link: https://patch.msgid.link/20260524163840.34247-2-eva.kurchatova@virtuozzo.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use unsigned int instead of unsigned for nsops parameter,
to match declaration in syscalls.h.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Link: https://patch.msgid.link/20260525004220.19277-1-xieyi@kylinos.cn
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The kselftests for nsfs where moved under filesystem/ with
commit cae73d3bdc ("seltests: move nsfs into filesystems
subfolder"). However, the kselftest TARGETS declaration was not
adjusted.
Since the kselftest Makefile ignores errors unless no target builds,
the invalid target declaration can easily be missed.
Fix this by adjusting the TARGETS accordingly.
Fixes: cae73d3bdc ("seltests: move nsfs into filesystems subfolder")
Signed-off-by: Florian Schmaus <flo@geekplace.eu>
Link: https://patch.msgid.link/20260526-kselftest-nsfs-v1-1-7b042ebe42d6@geekplace.eu
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Add support for the three pin controllers (MAIN, UPHY and AON) found on
Tegra264.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Tegra264 contains three pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the two pin controllers (MAIN and AON) found on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Tegra238 contains two pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Export tegra_pinctrl_probe() to allow SoC-specific Tegra pinctrl drivers
built as modules to use the common probe path.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix missing #include of pmu.h found while cleaning the evsel/evlist
header files. Sort the remaining header files for consistency with the
rest of the code. Doing this exposed a missing forward declaration of
addr_location in print_insn.h, add this and sort the forward
declarations.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing #includes found while cleaning the evsel/evlist header
files. Sort the remaining header files for consistency with the rest
of the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing #includes found while cleaning the evsel/evlist header
files. Sort the remaining header files for consistency with the rest
of the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing #includes found while cleaning the evsel/evlist header
files. Sort the remaining header files for consistency with the rest
of the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alice Rogers <alice.mei.rogers@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_sym_internal() had no filtering for .L* and L0* mapping
symbols while the kallsyms path already filters them via
is_ignored_kernel_symbol().
Add the same check gated by dso__kernel() so that kernel ELF objects
(vmlinux, .ko) have mapping symbols filtered across all architectures,
but userspace ELF objects are unaffected -- '$' is a valid prefix in
languages like Java and Scala.
The existing ARM/AArch64 and RISC-V architecture-specific mapping symbol
checks are preserved; the new is_ignored_kernel_symbol() check adds x86
local symbol (.L*, L0*) filtering and provides unified
cross-architecture coverage for kernel DSOs.
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mapping symbol filtering is scattered across multiple files with
inconsistent checks. The kernel's own is_mapping_symbol() covers x86
local symbols ('.L*' and 'L0*') on top of the '$' prefix used by
ARM/AArch64/RISC-V, but the perf tool only checks '$'.
Extract is_ignored_kernel_symbol() into symbol.h matching the kernel
definition, and convert the kallsyms and ksymbol event paths to use it.
Add ksymbol event name validation and early mapping symbol filtering
before any state mutation.
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently in the function opt3001_get_processed(), there is a check
that directly returns -ETIMEDOUT if the conversion IRQ times out,
completely bypassing the err label, leaving ok_to_ignore_lock
permanently true, potentially breaking the device's falling threshold
interrupt detection.
Assign -ETIMEDOUT to the return variable and jump to the error label
to ensure ok_to_ignore_lock is properly reset.
Fixes: 26d90b5590 ("iio: light: opt3001: Fixed timeout error when 0 lux")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260525-opt3001-cleanup-v4-0-65b36a174f78%40gmail.com?part=1
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
perf trace record fails some cases in powerpc
# perf test "perf trace record and replay"
128: perf trace record and replay : FAILED!
# perf trace record sleep 1
# echo $?
32
This is happening because of non-zero err value from
auxtrace_record__init() function.
static int record__auxtrace_init(struct record *rec)
{
int err;
if ((rec->opts.auxtrace_snapshot_opts || rec->opts.auxtrace_sample_opts)
&& record__threads_enabled(rec)) {
pr_err("AUX area tracing options are not available in parallel streaming mode.\n");
return -EINVAL;
}
if (!rec->itr) {
rec->itr = auxtrace_record__init(rec->evlist, &err);
if (err)
return err;
}
Here "int err" is not initialised. The code expects "err" to be set from
auxtrace_record__init() function.
Update auxtrace_record__init() in arch/powerpc/util/auxtrace.c to clear
err value in the beginning.
- Clear err value in beginning of function. Any fail later will
set appropriate return code to err.
- Even if we haven't found any event for auxtrace, perf record
should continue for other events. NULL return
will indicate that there is no auxtrace record initialized.
- Not having "err" set here will affect monitoring of other events
also because perf record will fail seeing random value in err.
Set err to -EINVAL before invoking auxtrace_record__init() in
builtin-record.c
With the fix,
# perf trace record sleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.033 MB perf.data (228 samples) ]
Fixes: 1dbfaf94cf ("perf powerpc: Add basic CONFIG_AUXTRACE support for VPA pmu on powerpc")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Shivani Nittor <shivani@linux.ibm.com>
Cc: Tanushree Shah <tanushree.shah@ibm.com>
Cc: Tejas Manhas <tejas.manhas1@ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no need nor gain in splitting mutex or list initializations
between two init functions as all of this is just pure software state
and all this could be done at once.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-8-michal.wajdeczko@intel.com
We should separate software-only state initialization from anything
else that requires access to the device's hardware. Extract d3cold
capability detection into a new function. Add simple kernel-doc for
updated functions here.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-7-michal.wajdeczko@intel.com
We would like to initialize more of the xe_device struct also from
the kunit code, as it should be safe to use most of the generic drm
or xe components without doing any additional tweaks. Separate early
xe initialization code to a new function, so it can be reused.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-6-michal.wajdeczko@intel.com
The xe_info_init_early() is a place where we initialize those of
the xe->info fields that do not require any additional hardware
probes. Move the initialization of the devid/revid also there, but
to avoid breaking the kunit helper, which also calls this function,
keep their initialization separate in sub-function so we can easily
stub it when running the kunit test.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-5-michal.wajdeczko@intel.com
The xe_info_init_early() is a place where we initialize those of
the xe->info fields that do not require any additional hardware
probes. Move the initialization of the force_execlist flag there.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-4-michal.wajdeczko@intel.com
We never used or need anything from the struct pci_device_id there.
And while around, add simple kernel-doc for this function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-3-michal.wajdeczko@intel.com
We don't need the partially initialized xe_device pointer to
find the sub-platform descriptor, as for the descriptor lookup
only the device ID is required and it can be obtained directly
from the pci_dev.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-2-michal.wajdeczko@intel.com
event_process_midi() borrows msynth->output_rfile.output and then
passes the substream to dump_midi() and snd_rawmidi_kernel_write()
without synchronizing with the output open/close transition.
midisynth_use() also publishes output_rfile before
snd_rawmidi_output_params() has finished.
The last midisynth_unuse() can therefore release the same rawmidi file
and free substream->runtime before snd_rawmidi_kernel_write1() takes
its runtime buffer reference. That leaves the event_input path using a
stale substream or runtime and can end in a NULL-deref or use-after-free.
Fix this with two pieces of synchronization. Keep a short IRQ-safe
spinlock only for publishing or clearing output_rfile and for pairing
the output snapshot with an snd_use_lock_t reference. Once
event_process_midi() has taken that in-flight reference, it drops the
spinlock before calling snd_seq_dump_var_event(), dump_midi(), or
snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible
rawmidi file under the same spinlock, waits for the in-flight writers
to drain, and only then drains and releases the saved file.
midisynth_use() likewise opens into a local snd_rawmidi_file and
publishes it only after snd_rawmidi_output_params() succeeds.
The buggy scenario involves two paths, with each column showing the
order within that path:
event_input path: last unuse path:
1. event_process_midi() snapshots 1. midisynth_unuse() starts
output_rfile.output. tearing down output_rfile.
2. dump_midi() reaches 2. snd_rawmidi_kernel_release()
snd_rawmidi_kernel_write() closes the output file.
before runtime is pinned. 3. close_substream() frees
3. The callback keeps using substream->runtime.
the borrowed substream.
Validation reproduced this kernel report:
KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360
RIP: 0033:0x7fde7dd0837f
RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260527062948.3614025-1-rollkingzzc@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include linux/bitfield.h for FIELD_GET().
Create new macros for bit manipulation in combination with manual bit
manipulation being replaced with FIELD_GET().
The current variable declaration and initializations are barely readable
and use comma separations across multiple lines. Refactor the
initializations so that mantissa and exp have separate declarations and
sign gets initialized later.
In addition (and due to the nature of the cleanup), fix a sign-extension
bug where, float32 would get bitwise anded with ~BIT(31)
(which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent.
Fixes: 64b3d8b1b0 ("iio: chemical: scd30: add core driver")
Reported-by: sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260524020309.18618-1-m32285159%40gmail.com
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Nathan Chancellor <nathan@kernel.org> says:
This series addresses the build failure I reported at [1]. The first
patch allows CONFIG_SND_SOC_SDCA to be selected by a user. The third
patch fixes the actual build failure by requiring CONFIG_SND_SOC_SDCA to
enable CONFIG_SND_SOC_ES9356. The second patch is a standalone clean up
to make the third patch diff cleaner. If there are any issues, please
let me know.
[1]: https://lore.kernel.org/20260518224657.GA536765@ax162/
Link: https://patch.msgid.link/20260526-es9356-dep-fixes-v1-0-39ac16f43d54@kernel.org
When building without CONFIG_SND_SOC_SDCA, there is an error at link
time when building the es9356-sdca driver:
ERROR: modpost: "sdca_asoc_q78_get_volsw" [sound/soc/codecs/snd-soc-es9356.ko] undefined!
ERROR: modpost: "sdca_asoc_q78_put_volsw" [sound/soc/codecs/snd-soc-es9356.ko] undefined!
Add an explicit dependency on CONFIG_SND_SOC_SDCA to ensure these
symbols are always present when building the driver.
Fixes: 5d9cb740cd ("ASoC: es9356-sdca: Add ES9356 SDCA driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260526-es9356-dep-fixes-v1-3-39ac16f43d54@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
