Align the number of dashes to the bigger column width (the title in this
case) to make the output more pleasant and aligned with what is done
in the "params" file output.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The "params" variable is used everywhere else, align this particular
line of the file to use "params" directly rather than the "nor" pointer.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
There are two status registers, named 1 and 2. The current wording is
misleading as "1" may refer to the status register ID as well as the
number of bytes required (which, in this case can be 1 or 2).
Clarify the comments by aligning them on the same pattern:
"{read,write} status {1,2} register"
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Not all chips implement the 4BAIT table which typically indicates the
program capability, while many of them do implement the relevant SFDP
parts indicating the read capabilities. In such a situation, programs
can happen in single mode (1-1-1) and reads in quad mode (1-1-4 or
1-4-4). For the reads to work in such condition, the QE bit must be set.
In case we later use the spi_nor_write_16bit_sr_and_check() helper with
a chip with such configuration, the QE bit would get incorrectly
cleared.
Make sure this doesn't happen by keeping the QE bit under a simpler
condition:
- the quad enable hook is there (no change)
- and at least one of the two protocols is based on quad I/O cycles
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
I do not think the MTD dependency is needed twice. This is likely a
duplicate coming from a former rebase when the spi-nor core got cleaned
up a while ago. Remove the extra line.
Fixes: b35b9a1036 ("mtd: spi-nor: Move m25p80 code in spi-nor.c")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
In the case of the first block being locked (or the few first blocks),
if the user want to fully unlock the device it has two possibilities:
- either it asks to unlock the entire device, and this works;
- or it asks to unlock just the block(s) that are currently locked,
which fails.
It fails because the conditions "can_be_top" and "can_be_bottom" are
true. Indeed, in this case, we unlock everything, so the TB bit does not
matter. However in the current implementation, use_top would be true (as
this is the favourite option) and lock_len, which in practice should be
reduced down to 0, is set to "nor->params->size - (ofs + len)" which is
a positive number. This is wrong.
An easy way is to simply add an extra condition. In the unlock() path,
if we can achieve the same result from both sides, it means we unlock
everything and lock_len must simply be 0. A comment is added to clarify
that logic.
Fixes: 3dd8012a8e ("mtd: spi-nor: add TB (Top/Bottom) protect support")
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
As mentioned above the spi_nor_option_flags enumeration in core.h, this
list should be kept in sync with the one in the core.
Add the missing flag.
Fixes: 6a42bc97cc ("mtd: spi-nor: core: Allow specifying the byte order in Octal DTR mode")
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Jakub Kicinski says:
====================
ethtool: module: fix a handful of small bugs
I've been poking at the locking in ethtool and it appears
that the FW flashing is not currently taking the ops lock.
Existing drivers which implement module FW flashing seem
to have their own locking, so this series doesn't actually
add the ops lock (I'll add it in net-next). But a number
of other errors have been surfaced in the process.
====================
Link: https://patch.msgid.link/20260522231312.1710836-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cmis_fw_update_start_download() copies start_cmd_payload_size bytes
from the firmware blob into the CDB LPL vendor_data[] payload without
validating that the FW has enough data.
Since the start_cmd_payload_size can only be ~120B an image too short
is most likely corrupted, so reject it.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_cmis_cdb_compose_args() accepts msleep_pre_rpl as u16 but stores
it into the u8 field ethtool_cmis_cdb_cmd_args::msleep_pre_rpl, silently
truncating values >= 256. Seven of the nine call sites pass 1000 ms
(it's the third argument from the end).
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming.
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single Netlink socket issues MODULE_FW_FLASH_ACT against multiple
devices, ethnl_sock_priv_set() overwrites sk_priv->dev on each call,
retaining only the last one. The socket priv is used on socket close,
to walk the global work list and mark the uncompleted flashing work
as "orphaned". Otherwise if another socket reuses the PID it will
unexpectedly receive the flashing notifications.
Don't record the device, record net pointer instead. The purpose of
the dev is to scope the work to a netns, anyway. If we store netns
the overrides are safe/a nop since all flashed devices must be in
the same netns as the socket.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_set_module_validate() inspects module_fw_flash_in_progress
but validate is meant for _input_ validation, not state validation.
rtnl_lock is not held, yet. Move the check into ethnl_set_module().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reviewing other changes Gemini points out that we currently
update module_fw_flash_in_progress without holding any locks.
Since module_fw_flash_in_progress is part of a bitfield this
is not great, updates to other fields may be lost.
We could use a bool and sprinkle some READ_ONCE/WRITE_ONCE here
but seems like the issue is rather than the work is an unusual
writer. The other writers already hold the right locks. So just
very briefly take these locks when the work completes.
Note that nothing ever cancels the FW update work, so there's
no concern with deadlocks vs cancel.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ethtool: rss: fix a handful of small bugs
Fix a handful of small bugs in the ethtool Netlink RSS code.
====================
Link: https://patch.msgid.link/20260522230647.1705600-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We wait with filling the reply for new RSS context creation
until after the driver ->create_rxfh_context call. The driver
needs to fill some of the defaults in the context. The failure
of rss_fill_reply() is somewhat theoretical, but doesn't take
much effort to handle it properly. Call ->remove_rxfh_context().
If the driver's remove callback fails (some implementations like sfc
can return real command errors from firmware RPCs) - skip the xa_erase
and kfree, leaving the context in the xarray. This matches how
ethnl_rss_delete_doit() behaves.
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_get_data_alloc() allocates a single buffer that backs both the
indirection table and the hash key, but only assigned data->indir_table
when indir_size was nonzero. The expectation was that no driver
implements RSS without supporting indirection table but apparently
enic does just that (it's the only such in-tree driver).
enic has get_rxfh_key_size but no get_rxfh_indir_size.
data->indir_table stays as NULL, hkey gets set but rss_get_data_free()
kfree(data->indir_table) is a nop and the allocation leaks.
Always store the allocation base in data->indir_table so the free path
is unambiguous. No caller treats indir_table as a sentinel; everything
keys off indir_size.
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Link: https://patch.msgid.link/20260522230647.1705600-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation.
Fixes: 4f038a6a02 ("net: ethtool: Don't call .cleanup_data when prepare_data fails")
Link: https://patch.msgid.link/20260522230647.1705600-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_set_prep_indir() compares the new indirection table against the
current one to determine whether any update is needed. The memcmp
call passes data->indir_size as the length argument, but indir_size
is the number of u32 entries, not the byte count.
Fixes: c0ae03588b ("ethtool: rss: initial RSS_SET (indirection table handling)")
Link: https://patch.msgid.link/20260522230647.1705600-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remember to set ret before jumping out if someone tries
to delete a context on a device which doesn't support
contexts.
Fixes: fbe09277fa ("ethtool: rss: support removing contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gemini says that we're modifying the RSS_CREATE response skb.
I think it's right, the comment says that unicast() should
unshare the skb but I'm not entirely sure what I meant there.
netlink_trim() does a copy but only if skb is not well sized
(it's at least 2x larger than necessary for the payload).
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A previous bug in __pkvm_init_vm error path showed that the hypervisor
could leak refcounted pages, (i.e. losing access to a page while its
refcount is still elevated). This poses a threat to the pKVM state
machine.
Address this by introducing a fail-safe in __pkvm_hyp_donate_host.
Transitions are not a hot path so added security is worth the extra
check.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260521143626.1005660-4-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In the unlikely case where insert_vm_table_entry fails, __pkvm_init_vm
release the memory donated by the host for the PGD, but as the stage-2
is still set-up the hypervisor keeps a refcount on those pages,
effectively leaking the references.
Fix the rollback with the newly added kvm_guest_destroy_stage2().
Fixes: 256b4668cd ("KVM: arm64: Introduce separate hypercalls for pKVM VM reservation and initialization")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260521143626.1005660-3-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a VM fails to initialise after its stage-2 hyp_pool has been
initialised, that stage-2 must be torn down entirely. This requires
resetting both the refcount and the order of its pages back to 0.
Currently, reclaim_pgtable_pages() implicitly resets the page order by
allocating the entire pool with order-0 granularity. However, in the VM
initialisation error path, the addresses of the donated memory (the PGD)
are already known, making it unnecessary to iterate over all pages in
the pool.
Since the vmemmap page order is a hyp_pool-specific field, leaving a
non-zero order on hyp_pool destruction is harmless until another pool
attempts to admit the page. Instead of resetting this field during
destruction, reset it during pool initialization in hyp_pool_init().
For 'external' pages, we can't trust the order either as they bypass
hyp_pool_init(). Since we never coalesce them, enforce order-0 to ensure
safe insertion into the pool.
This leaves no vmemmap order users outside of hyp_pool.
Fixes: 256b4668cd ("KVM: arm64: Introduce separate hypercalls for pKVM VM reservation and initialization")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260521143626.1005660-2-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit 4e16c11752 ("cpufreq/amd-pstate: Stop caching EPP") removed
the epp_cached field from struct amd_cpudata in favour of always
reading from cppc_req_cached, but the kdoc above the struct still
documents @epp_cached.
Drop the now-stale @epp_cached entry.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Fixes: 4e16c11752 ("cpufreq/amd-pstate: Stop caching EPP")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Link: https://lore.kernel.org/r/20260526022131.1302373-1-zhanxusheng@xiaomi.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Enable the PCIe controllers on the Jetson AGX Thor Developer Kit that
are used for ethernet and NVMe.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 64-bit address of the main GPIO controller on Tegra264 is
0x810c300000. The main GPIO controller was incorrectly added under the
bus@0 node instead of the bus@8100000000 node breaking the boot on
Tegra264. Fix this by moving to main GPIO controller node under
bus@8100000000.
Fixes: c70e6bc11d ("arm64: tegra: Add Tegra264 GPIO controllers")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
socfpga_smp_prepare_cpus() looks up the Cortex-A9 SCU node with
of_find_compatible_node(), which returns a node reference that must be
released with of_node_put().
The function maps the SCU registers and then returns without dropping
that reference, leaking the node on both the success path and the
of_iomap() failure path.
Drop the reference once the mapping attempt is complete. The returned
MMIO mapping does not depend on keeping the device node reference held.
Fixes: 122694a0c7 ("ARM: socfpga: use of_iomap to map the SCU")
Cc: stable@vger.kernel.org
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
mod_delayed_work() unconditionally queues the work even when it wasn't
previously pending, which can fire the timeout prematurely or restart it
after it already fired. Add a delayed_work_pending() guard to restore
the originally intended semantics.
Premature firing calls fw_devlink_drivers_done() before all built-in
drivers have registered, causing fw_devlink to prematurely relax device
links for suppliers whose drivers haven't loaded yet.
Fixes: 1137838865 ("driver core: Use mod_delayed_work to prevent lost deferred probe work")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525012340.3860581-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Some platforms have incorrect T_POWER_ON value programmed in hardware.
Generally these will be corrected by bootloaders, but not all targets
support bootloaders to program correct values. That means the
LTR_L1.2_THRESHOLD value calculated by aspm.c can be wrong, which can
result in improper L1.2 exit behavior. If AER happens to be supported and
enabled, the error may be *reported* via AER.
Parse the 't-power-on-us' property from each Root Port node and program it
as part of host initialization using dw_pcie_program_t_power_on() before
link training.
This property in added to the dtschema here [1].
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: reworded comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link[1]: https://lore.kernel.org/all/20260205093346.667898-1-krishna.chundru@oss.qualcomm.com/
Link: https://patch.msgid.link/20260428-t_power_on_fux-v5-3-f1ef926a91ff@oss.qualcomm.com
The T_POWER_ON indicates the time (in μs) that a Port requires the port on
the opposite side of Link to wait in L1.2.Exit after sampling CLKREQ#
asserted before actively driving the interface. This value is used by the
ASPM driver to compute the LTR_L1.2_THRESHOLD.
Currently, some controllers expose T_POWER_ON value of zero in the L1SS
capability registers, leading to incorrect LTR_L1.2_THRESHOLD calculations,
which can result in improper L1.2 exit behavior and if AER happens to be
supported and enabled, the error may be *reported* via AER.
Add a helper to override T_POWER_ON value by the DWC controller drivers.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: changed t_power_on to u32]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260428-t_power_on_fux-v5-2-f1ef926a91ff@oss.qualcomm.com
Add pcie_encode_t_power_on() to encode the PCIe L1 PM Substates T_POWER_ON
parameter into the T_POWER_ON Scale and T_POWER_ON Value fields.
This helper can be used by the controller drivers to change the
default/wrong value of T_POWER_ON in L1SS capability register to avoid
incorrect calculation of LTR_L1.2_THRESHOLD value.
The helper converts a T_POWER_ON time specified in microseconds into the
appropriate scale/value encoding defined by PCIe r7.0, sec 7.8.3.2. Values
that exceed the maximum encodable range are clamped to the largest
representable encoding.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: changed t_power_on_us to u32, added helper name to subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260428-t_power_on_fux-v5-1-f1ef926a91ff@oss.qualcomm.com
The driver currently supports two PERST# and PHY DT configurations. In one
case, PHY and PERST# are described in the RC node. In the other case, they
are described in the RP node.
A mixed setup is not supported. One common example is PHY on the RP node
while PERST# remains on the RC node. In that case the driver goes through
the RP parse path, does not find PERST# on RP, and does not report an error
because PERST# is optional. Probe can then succeed silently while PERST# is
left uncontrolled, and PCIe endpoints fail to work later. This silent
probe success makes debugging difficult.
Handle this mixed case in the RP parse path by checking whether PERST# is
present on RC and, if so, using the RC PERST# GPIO for RP ports while
keeping RP parsing for PHY. Emit a warning to indicate mixed DT content so
it can be fixed.
This keeps mixed systems functional and makes the configuration issue
visible instead of failing later at endpoint bring-up.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: folded the fix: https://lore.kernel.org/linux-pci/20260526-fix_perst_gpio_handling-v1-1-9170507bb4e9@oss.qualcomm.com]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260508-mix_perst_phy_dts-v1-1-9eff6ee9b51a@oss.qualcomm.com
Loongson 7A series PCH contain a LPC IRQ controller.
Add the device tree node of it.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The RTC's address is after UARTs, however the node is currently before
them.
Re-order the node to match address sequence.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
kconfiglint reports:
K008: config FIT_IMAGE_FDT_EPM5 has prompts in 2 separate definitions
The FIT_IMAGE_FDT_EPM5 Kconfig symbol is defined identically in two places:
arch/mips/Kconfig:1052
arch/mips/mobileye/Kconfig:17
Both have the same prompt, depends, default, and help text. Since
arch/mips/mobileye/Kconfig is sourced from arch/mips/Kconfig, both
definitions are parsed and the symbol ends up with two prompts.
The symbol was first introduced in commit 101bd58fde ("MIPS: Add
support for Mobileye EyeQ5") directly in
arch/mips/Kconfig. Three months later, commit fbe0fae601 ("MIPS:
mobileye: Add EyeQ6H support") created the
arch/mips/mobileye/Kconfig sub-file to organize the growing Mobileye
platform code and added the MACH_EYEQ5/MACH_EYEQ6H choice along with
a copy of FIT_IMAGE_FDT_EPM5. However, the original definition in
arch/mips/Kconfig was not removed at that time, leaving a duplicate.
Remove the definition from arch/mips/Kconfig, keeping the one in
arch/mips/mobileye/Kconfig where it belongs alongside the related
MACH_EYEQ5 machine type definition that it depends on.
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, Ralink SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 16 bytes for
RT288X and 32 bytes for other Ralink SoCs.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The last user was removed in commit aea12071d6
("power/supply: Drop obsolete JZ4740 driver") and replaced by
a self-contained IIO-based driver. No file includes this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The last user was the JZ4740 MFD ADC driver, removed in commit
ff71266aa4 ("mfd: Drop obsolete JZ4740 driver") and replaced
by a self-contained IIO driver. No file includes or references
this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
A MIPS allmodconfig built with LLVM can select CPU_MIPS32_R1 together
with MIPS_MT_SMP. In that configuration clang invokes the integrated
assembler with -march=mips32, and the MIPS MT path in cps-vec.S fails
to assemble two jr.hb instructions:
arch/mips/kernel/cps-vec.S:376:2: error: instruction requires
a CPU feature not currently enabled
arch/mips/kernel/cps-vec.S:490:4: error: instruction requires
a CPU feature not currently enabled
The earlier jr.hb in the same file is already assembled inside a .set
MIPS_ISA_LEVEL_RAW scope. The two failing sites are reached after
popping back to the file's base ISA level, so LLVM correctly rejects
them for an R1 target.
Wrap those jr.hb instructions in the same ISA-level push/pop used by
the working site. This keeps the MT code unchanged while making the
required R2 hazard-branch encoding explicit to the assembler.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In 64-bit configurations calling the initial console output handler from
a kernel thread other than the initial one will result in a situation
where the stack has been placed in the XKPHYS 64-bit memory segment and
consequently so has been the buffer allocated there that is used as the
argument corresponding to the `%s' output conversion specifier for the
firmware's printf() entry point.
This 64-bit address will then be truncated by 32-bit firmware, resulting
in an attempt to access the wrong memory location, which in turn will
cause all kinds of unpredictable behaviour, such as a kernel crash:
Console: colour dummy device 160x64
Calibrating delay loop... 49.36 BogoMIPS (lpj=192512)
pid_max: default: 32768 minimum: 301
CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800
Oops[#1]:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121
$ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0
$ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073
$ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473
$12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000
$16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240
$20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b
$24 : ffffffffffffffbf 000000000203bd00
$28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800
Hi : 0000000000000000
Lo : 0000000000000aa8
epc : ffffffffbfc08364 0xffffffffbfc08364
ra : ffffffffbfc08800 0xffffffffbfc08800
Status: 140120e2 KX SX UX KERNEL EXL
Cause : 00000008 (ExcCode 02)
BadVA : 000000000203bd00
PrId : 00000430 (R4000SC)
Modules linked in:
Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d
80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38
0000000000000000 000000000203bd00 0000000000000000 0000000000000000
0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000002500000000 0000000000000000 0000000000000000 802c1a7400000000
0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172
6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320
806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000
...
Call Trace:
Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8)
>>
In this case the pointer in $4 was truncated from 0x980000000203bd00 to
0x000000000203bd00.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started.
Fix the issue by making the buffer static and initdata, and therefore
placed in the CKSEG0 32-bit compatibility segment, observing that the
console output handler is called with the console lock held, implying
no need for this code to be reentrant. Add an assertion to verify the
buffer actually has been placed in a compatibility segment.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is no need for IOASIC DMA error interrupts to use the IRQF_ONESHOT
flag, because while they do need to have the source cleared only at the
conclusion of handling, the action handler supplied is either run in the
hardirq context with interrupts disabled at the CPU level or, where IRQ
threading has been forced, the primary handler has the IRQF_ONESHOT flag
implicitly added and therefore the original action handler, now run as
the thread handler and with interrupts enabled in the CPU, is executed
with the originating interrupt line masked. Therefore no interrupt will
retrigger regardless until the original request has been handled.
Link: https://lore.kernel.org/r/20260127135334.qUEaYP9G@linutronix.de/
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove a bunch of compilation warnings for halt/reset handlers:
arch/mips/dec/reset.c:22:17: warning: no previous prototype for 'dec_machine_restart' [-Wmissing-prototypes]
22 | void __noreturn dec_machine_restart(char *command)
| ^~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:27:17: warning: no previous prototype for 'dec_machine_halt' [-Wmissing-prototypes]
27 | void __noreturn dec_machine_halt(void)
| ^~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:32:17: warning: no previous prototype for 'dec_machine_power_off' [-Wmissing-prototypes]
32 | void __noreturn dec_machine_power_off(void)
| ^~~~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:38:13: warning: no previous prototype for 'dec_intr_halt'
[-Wmissing-prototypes]
38 | irqreturn_t dec_intr_halt(int irq, void *dev_id)
| ^~~~~~~~~~~~~
(which get promoted to compilation errors with CONFIG_WERROR), by moving
the local prototypes from arch/mips/dec/setup.c to a dedicated header
for arch/mips/dec/reset.c to use as well. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
