Caller of pcibios_align_resource() (__find_resource_space()) already aligns
the start address by 'alignment' so aligning is only necessary if align >
alignment.
Change also to use ALIGN() instead of open-coding.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-8-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-7-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/20260324165633.4583-6-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-5-ilpo.jarvinen@linux.intel.com
__find_resource_space() has variable called 'tmp'. Rename it to
'full_avail' to better indicate its purpose.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-4-ilpo.jarvinen@linux.intel.com
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
Add support for ACTMON on Tegra114. This is used to monitor activity from
different components. Based on the collected statistics, the rate at which
the external memory needs to be clocked can be derived.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When FRED was added to the mainline kernel, it was set up as an explicit
opt-in due to the risk of regressions before hardware was available publicly.
Now, Panther Lake (Core Ultra 300 series) has been released, and benchmarking
by Phoronix has shown that it provides a significant performance benefit on
most workloads:
https://www.phoronix.com/review/intel-fred-panther-lake
Accordingly, enable FRED by default if the CPU supports it. FRED can of
course still be disabled via the fred=off command line option.
Touch up Kconfig help too.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://patch.msgid.link/20260325230151.1898287-2-hpa@zytor.com
Both smartphones have capacitive buttons but only P895 supports RMI4
function 1A (0D touch), while P880 exposes buttons area as a region of the
touchscreen.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing charger, MUIC and ADC sensor nodes. Reconfigure USB, set one
of the ADC channels as the fuel gauge temperature sensor and add a battery
thermal zone.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add RGB-DSI bridge and panel nodes to LG Optimus 4X and Vu device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Adjust panel node in Tegra Note 7 according to the updated schema.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Apparently this same protocol is used by more mice from different brands.
This patch adds support for the VXE Dragonfly R1 Pro.
Tested-by: Dominykas Svetikas <dominykas@svetikas.lt>
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add SOCTHERM and thermal zones nodes into common Tegra 4 device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Justin Tee <justin.tee@broadcom.com>
Cc: Naresh Gottumukkala <nareshgottumukkala83@gmail.com>
CC: Paul Ely <paul.ely@broadcom.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Section 8.3.4.5.2 of the NVMe 2.1 base spec states that
"""
The 00h identifier shall not be proposed in an AUTH_Negotiate message
that requests secure channel concatenation (i.e., with the SC_C field
set to a non-zero value).
"""
We need to ensure that we don't set the NVME_AUTH_DHGROUP_NULL idlist if
SC_C is set.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kamaljit Singh <kamaljit.singh@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In preperation for using DHCHAP length in upcoming host and target
patches let's add the hash and diffie-hellman ID length macros.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yunje Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The Kingston OM3SGP42048K2-A00 (PCI ID 2646:502f) firmware has a race
condition when processing concurrent write zeroes and DSM (discard)
commands, causing spurious "LBA Out of Range" errors and IOMMU page
faults at address 0x0.
The issue is reliably triggered by running two concurrent mkfs commands
on different partitions of the same drive, which generates interleaved
write zeroes and discard operations.
Disable write zeroes for this device, matching the pattern used for
other Kingston OM* drives that have similar firmware issues.
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVM Command Set Identify Controller data may report a non-zero
Write Zeroes Size Limit (wzsl). When present, nvme_init_non_mdts_limits()
unconditionally overrides max_zeroes_sectors from wzsl, even if
NVME_QUIRK_DISABLE_WRITE_ZEROES previously set it to zero.
This effectively re-enables write zeroes for devices that need it
disabled, defeating the quirk. Several Kingston OM* drives rely on
this quirk to avoid firmware issues with write zeroes commands.
Check for the quirk before applying the wzsl override.
Fixes: 5befc7c26e ("nvme: implement non-mdts command limits")
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
A block device with a very large discard_granularity queue limit may not
be able to report it in the 16-bit NPDG and NPDA fields in the Identify
Namespace data structure. For this reason, version 2.1 of the NVMe specs
added 32-bit fields NPDGL and NPDAL to the NVM Command Set Specific
Identify Namespace structure. So report the discard_granularity there
too and set OPTPERF to 11b to indicate those fields are supported.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Use the NVME_NS_FEAT_OPTPERF_SHIFT constant in nvmet_bdev_set_limits()
to set the OPTPERF bits of the nvme_id_ns NSFEAT field instead of the
magic number 4.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, nvme_config_discard() always sets the discard_granularity
queue limit to the logical block size. However, NVMe namespaces can
advertise a larger preferred discard granularity in the NPDG or NPDA
field of the Identify Namespace structure or the NPDGL or NPDAL fields
of the I/O Command Set Specific Identify Namespace structure.
Use these fields to compute the discard_granularity limit. The logic is
somewhat involved. First, the fields are optional. NPDG is only reported
if the low bit of OPTPERF is set in NSFEAT. NPDA is reported if any bit
of OPTPERF is set. And NPDGL and NPDAL are reported if the high bit of
OPTPERF is set. NPDGL and NPDAL can also each be set to 0 to opt out of
reporting a limit. I/O Command Set Specific Identify Namespace may also
not be supported by older NVMe controllers. Another complication is that
multiple values may be reported among NPDG, NPDGL, NPDA, and NPDAL. The
spec says to prefer the values reported in the L variants. The spec says
NPDG should be a multiple of NPDA and NPDGL should be a multiple of
NPDAL, but it doesn't specify a relationship between NPDG and NPDAL or
NPDGL and NPDA. So use the maximum of the reported NPDG(L) and NPDA(L)
values as the discard_granularity.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVMe specifications are big fans of "0's based"/"0-based" fields for
encoding values that must be positive. The encoded value is 1 less than
the value it represents. nvmet already provides a helper to0based() for
encoding 0's based values, so add a corresponding helper to decode these
fields on the host side.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, the I/O Command Set specific Identify Namespace structure is
only fetched for controllers that support extended LBA formats. This is
because struct nvme_id_ns_nvm is only used by nvme_configure_pi_elbas(),
which is only called when the ELBAS bit is set in the CTRATT field of
the Identify Controller structure.
However, the I/O Command Set specific Identify Namespace structure will
soon be used in nvme_update_disk_info(), so always try to obtain it in
nvme_update_ns_info_block(). This Identify structure is first defined in
NVMe spec version 2.0, but controllers reporting older versions could
still implement it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In NVMe verson 2.0 and below, OPTPERF comprises only bit 4 of NSFEAT in
the Identify Namespace structure. Since version 2.1, OPTPERF includes
both bits 4 and 5 of NSFEAT. Replace the NVME_NS_FEAT_IO_OPT constant
with NVME_NS_FEAT_OPTPERF_SHIFT, NVME_NS_FEAT_OPTPERF_MASK, and
NVME_NS_FEAT_OPTPERF_MASK_2_1, representing the first bit, pre-2.1 bit
width, and post-2.1 bit width of OPTPERF.
Update nvme_update_disk_info() to check both OPTPERF bits for
controllers that report version 2.1 or newer, as NPWG and NOWS are
supported even if only bit 5 is set.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The choice of what queue limits are set in nvme_update_disk_info() vs.
nvme_config_discard() seems a bit arbitrary. A subsequent commit will
compute the discard_granularity limit using struct nvme_id_ns, which is
only passed to nvme_update_disk_info() currently. So move the logic in
nvme_config_discard() to nvme_update_disk_info(). Replace several
instances of ns->ctrl in nvme_update_disk_info() with the ctrl variable
brought from nvme_config_discard().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A subsequent change will use the NPDGL and NPDAL fields of the NVM
Command Set Specific Identify Namespace structure, so add them (and the
handful of intervening fields) to struct nvme_id_ns_nvm. Add an
assertion that the size is still 4 KB.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Allow userspace to trigger a reauth (REPLACETLSPSK) from sysfs.
This can be done by writing a zero to the sysfs file.
echo 0 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/tls_configured_key
In order to use the new keys for the admin queue we call controller
reset. This isn't ideal, but I can't find a simpler way to reset the
admin queue TLS connection.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Curently after the host sends a REPLACETLSPSK we free the TLS keys as
part of calling nvmet_auth_sq_free() on success. This means when the
host sends a follow up REPLACETLSPSK we return CONCAT_MISMATCH as the
check for !nvmet_queue_tls_keyid(req->sq) fails.
This patch ensures we don't free the TLS key on success as we might need
it again in the future.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If the host sends a AUTH_Negotiate Message on the admin queue with
REPLACETLSPSK set then we expect and require a TLS connection and
shouldn't report an error if TLS is enabled.
This change only enforces the nvmet_queue_tls_keyid() check if we aren't
resetting the negotiation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Remove crypto/hkdf.c, since it's no longer used. Originally it had two
users, but now both of them just inline the needed HMAC computations
using the HMAC library APIs. That ends up being better, since it
eliminates all the complexity and performance issues associated with the
crypto_shash abstraction and multi-step HMAC input formatting.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Now that nvme-auth uses the crypto library instead of crypto_shash,
remove obsolete selections from the NVME_AUTH kconfig option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since nvme_auth_digest_name() is no longer used, remove it and the
associated data from the hash_map array.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvmet_auth_ctrl_hash(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvmet_auth_host_hash(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since nvme-auth is now doing its HMAC computations using the crypto
library, it's guaranteed that all the algorithms actually work.
Therefore, remove the crypto_has_shash() checks which are now obsolete.
However, the caller in nvmet_auth_negotiate() seems to have also been
relying on crypto_has_shash(nvme_auth_hmac_name(host_hmac_id)) to
validate the host_hmac_id. Therefore, make it validate the ID more
directly by checking whether nvme_auth_hmac_hash_len() returns 0 or not.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Now that the crypto_shash that is being allocated in
nvme_auth_process_dhchap_challenge() and stored in the
struct nvme_dhchap_queue_context is no longer used, remove it.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_dhchap_setup_ctrl_response(), use
the crypto library instead of crypto_shash. This is simpler, faster,
and more reliable.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_dhchap_setup_host_response(), use
the crypto library instead of crypto_shash. This is simpler, faster,
and more reliable.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HKDF-Expand-Label computation in nvme_auth_derive_tls_psk(), use
the crypto library instead of crypto_shash and crypto/hkdf.c.
While this means the HKDF "helper" functions are no longer utilized,
they clearly weren't buying us much: it's simpler to just inline the
HMAC computations directly, and this code needs to be tested anyway. (A
similar result was seen in fs/crypto/. As a result, this eliminates the
last user of crypto/hkdf.c, which we'll be able to remove as well.)
As usual this is also a lot more efficient, eliminating the allocation
of a transformation object and multiple other dynamic allocations.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_generate_digest(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_generate_psk(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the crypto transformation object
allocation for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the hash and HMAC computations in nvme_auth_augmented_challenge(),
use the crypto library instead of crypto_shash. This is simpler,
faster, and more reliable. Notably, this eliminates two crypto
transformation object allocations for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For the HMAC computation in nvme_auth_transform_key(), use the crypto
library instead of crypto_shash. This is simpler, faster, and more
reliable. Notably, this eliminates the transformation object allocation
for every call, which was very slow.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add some helper functions for computing HMAC-SHA256, HMAC-SHA384, or
HMAC-SHA512 values using the crypto library instead of crypto_shash.
These will enable some significant simplifications and performance
improvements in nvme-auth.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
