The vrefp_regs and vrefn_regs arrays are constant lookup tables and
are not modified.
Make them static const so they are not reinitialized on each probe
call and are placed in read-only memory. Mark the pointer array as
const as well to prevent unintended modification.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace sprintf() with sysfs_emit() in sysfs attribute show
callbacks. sysfs_emit() is the preferred API as it is aware of the
sysfs buffer page size limit.
Signed-off-by: Gabriel Rondon <grondon@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Link ID Info field in the Reconfiguration Status Duple subfield of
the Reconfiguration Response frame only uses the lower four bits for the
link ID. The upper bits are reserved and should therefore be ignored.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325215404.ab5ccf4bc62e.I9aef8f4fb6f1b06671bb6cf0e2bd4ec6e4c8bda4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the TODO comment in adf4350_set_freq() with a NOTE explaining
that a constant-time approach using fls_long() was attempted but deemed
more complex without meaningful benefit for initialization code.
Signed-off-by: Neel Bullywon <neelb2403@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow transmitting protected dual of public action frames on
NAN device and NAN data interfaces, since NAN action frames
may be protected and can be sent on both.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260318143604.73801a92180c.I16000c3e1e2bbc320457db1ac728d789bb2f36c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If all available channel resources are used for NAN channels, and one of
them is shared with another interface, and that interface needs to move
to a different channel (for example STA interface that needs to do a
channel or a link switch), then the driver can evacuate one of the NAN
channels (i.e. detach it from its channel resource and announce to the
peers that this channel is ULWed). In that case, the driver needs to
notify user space about the channel evacuation, so the user space can
adjust the local schedule accordingly.
Add a notification to let userspace know about it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d5bebfd5ff73.Iaaf5ef17e1ab7a38c19d60558e68fcf517e2b400@changeid
Link: https://patch.msgid.link/20260318123926.206536-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an NL80211 command to configure the NAN schedule of a NAN peer.
Such a schedule contains a list of NAN channels, and a mapping from each
time slots to the corresponding channel (or unscheduled).
Also contains more information about the schedule, such as sequence ID
and map ID.
Not all of the restrictions are validated in this patch. In particular,
comparison of two maps of the same peer requires storing/retrieving each
map of each peer, only for validation.
Therefore, it is the responsibilty of the driver to check that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.5b13fa5af4f6.If0e214ff5b52c9666e985fefa3f7be0ad14d93fb@changeid
Link: https://patch.msgid.link/20260318123926.206536-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are 2 types of logical links with a NAN peer:
- management (NMI), which is used for Tx/Rx of NAN management frames.
- data (NDI), which is used for Tx/Rx of data frames, or non-NAN
management frames.
The NMI station has two roles:
- representation of the NAN peer - for example, the peer's schedule
and the HT, VHT, HE capabilities - belong to the NMI station, and not to
the NDI ones.
- Tx/Rx of NAN management frames to/from the peer.
The NDI station is used for Tx/Rx data frames of a specific NDP that was
established with the NAN peer.
Note that a peer can choose to reuse its NMI address as the NDI address.
In that case, it is expected that two stations will be added even though
they will have the same address.
- An NDI station can only be added after the corresponding NMI station
was configured with capabilities.
- All the NDI stations will be removed before the NDI interface is brought
down.
- All NMI stations will be removed before NAN is stopped.
- Before NMI sta removal, all corresponding NDI stations will be removed
Add support for adding, removing, and changing NMI and NDI stations.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d280936ee832.I6d859eee759bb5824a9ffd2984410faf879ba00e@changeid
Link: https://patch.msgid.link/20260318123926.206536-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, unlike in other modes, there is only one set of (HT, VHT, HE)
capabilities that is used for all channels (and bands) used in the NAN
data path.
This set of capabilities will have to be a special one, for example - have
the minimum of (HT-for-5 GHz, HT-for-2.4 GHz), careful handling of the
bits that have a different meaning for each band, etc.
While we could use the exiting sband/iftype capabilities, and require
identical capabilities for all bands (makes no sense since this means
that we will have VHT capabilities in the 2.4 GHz slot),
or require that only one of the sbands will be set,
or have logic to extract the minimum and handle the conflicting bits -
it seems simpler to add a dedicated set of capabilities which is special
for NAN, and is band agnostic, to be populated by the driver.
That way we also let the driver decide how it wants to handle the
conflicting bits.
Add this special set of these capabilities to wiphy:nan_capabilities, to be
populated by the driver.
Send it to user space.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.4b6f3e4a81b4.I45422adc0df3ad4101d857a92e83f0de5cf241e1@changeid
Link: https://patch.msgid.link/20260318123926.206536-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new interface type represents a NAN data interface (NDI).
It is used for data communication with NAN peers.
Note that the existing NL80211_IFTYPE_NAN interface, which is the NAN
Management Interface (NMI), is used for management communication.
An NDI interface is started when a new NAN data path is about to
be established, and is stopped after the NAN data path is terminated.
- An NDI interface can only be started if the NMI is running, and NAN is
started.
- Before the NMI is stopped, the NDI interfaces will be stopped.
Add the new interface type, handle add/remove operations for it,
and makes sure of the conditions above.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.0d681335c2e2.I92973483e927820ae2297853c141842fdb262747@changeid
Link: https://patch.msgid.link/20260318123926.206536-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an nl80211 API to allow user space to configure the local NAN
schedule.
The local schedule consists of a list of channel definitions and a schedule
map, in which each element covers a time slot and indicates on what
channel the device should be in that time slot.
Channels can be added to schedule even without being scheduled, for
reservation purposes.
A schedule can be configured either immedietally or be deferred, in case
there are already connected peers.
When the deferred flag is set, the command is a request from the device
to perform an announced schedule update: send the updated NAN
Availability - as set in this command - to the peers, and do the
actual switch to the new schedule on the right time (i.e. at the end of
the slot after the slot in which the update was sent to the peers).
In addition, a notification will be sent to indicate a deferred update
completion.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.ecca178a2de0.Ic977ab08b4ed5cf9b849e55d3a59b01ad3fbd08e@changeid
Link: https://patch.msgid.link/20260318123926.206536-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCacOsDwAKCRDacY7uyt+O
fWA/AQCnX8yvHo7czGrWQaiX/I7d1gh1x5i1YP7hyeoahdjZXwEAqndyDptkWYzB
0xuAIfX8SIpSHh7XCrkpADb3o9tEgAY=
=114X
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2026-03-25' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next into wireless-next
Miri Korenblit says:
====================
wifi: iwlwifi: updates - 2026-03-25
====================
Looks like among mostly cleanups there's
- UNII-9 enablement,
- more UHR work, and
- various FW API updates
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we failed on drv_start, we currently cleanup AP_VLAN reference to
bss.
But this is not needed, since AP_VLAN must be tied to a pre-existing AP
interface, so open_count cannot be 0, so we will never call drv_start
for AP_VLAN interfaces.
Remove these cleanup and return immediately instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154742.3c532a9132c3.Idac5c38d5ad7ce97782a8c05ae72bb0c689c4fa9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic that tries to reuse an existing chanctx or create a new one if
such doesn't exist will be used for other types of chanctx users.
Extract this logic from _ieee80211_link_use_channel.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154550.9a08397a7590.Id24934d14f240f8d38a23f3b1786235bac0b3e60@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the LTC2305 ADC to the LTC2309 driver. The LTC2305 is
a 2-channel, 12-bit SAR ADC that is register-compatible with the
LTC2309 but has a different channel selection mapping and count.
To support multiple chips in this family, introduce ltc2309_chip_info
struct to store chip-specific channel specifications and names.
The probe function now uses i2c_get_match_data() to retrieve the
correct configuration for the detected device.
Specific channel addresses for LTC2305 (CH0, CH1, and differential
pairs) are added based on the datasheet.
Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current ltc2309_channels enum relies on implicit sequential
assignment. While this works for the 8-channel LTC2309, it is
not intuitive and makes it difficult to support other chips in
the same family that might have different bit mappings.
Explicitly assign hex values to the enum members based on the
channel selection bits defined in the datasheet. This improves
code readability and provides a consistent pattern for future
chip support.
Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for the 2-channel LTC2305 ADC in the
existing ltc2497 binding.
This enables automatic device tree matching for LTC2305
while using the LTC2309 driver (drivers/iio/adc/ltc2309.c),
since both ADCs share the same I2C interface and 12-bit SAR architecture.
The main difference is the number of channels (LTC2305: 2, LTC2309: 8).
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for
the virt_wifi net devices. However, unregistering a virt_wifi device in
netdev_run_todo() can happen together with the device referenced by
SET_NETDEV_DEV().
It can result in use-after-free during the ethtool operations performed
on a virt_wifi device that is currently being unregistered. Such a net
device can have the `dev.parent` field pointing to the freed memory,
but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`.
Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this:
==================================================================
BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0
Read of size 2 at addr ffff88810cfc46f8 by task pm/606
Call Trace:
<TASK>
dump_stack_lvl+0x4d/0x70
print_report+0x170/0x4f3
? __pfx__raw_spin_lock_irqsave+0x10/0x10
kasan_report+0xda/0x110
? __pm_runtime_resume+0xe2/0xf0
? __pm_runtime_resume+0xe2/0xf0
__pm_runtime_resume+0xe2/0xf0
ethnl_ops_begin+0x49/0x270
ethnl_set_features+0x23c/0xab0
? __pfx_ethnl_set_features+0x10/0x10
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xf/0xf0
? local_clock+0x10/0x30
? kasan_save_track+0x25/0x60
? __kasan_kmalloc+0x7f/0x90
? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0
genl_family_rcv_msg_doit+0x1e7/0x2c0
? __pfx_genl_family_rcv_msg_doit+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? stack_trace_save+0x8e/0xc0
genl_rcv_msg+0x411/0x660
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_ethnl_set_features+0x10/0x10
netlink_rcv_skb+0x121/0x380
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_down_read+0x10/0x10
genl_rcv+0x23/0x30
netlink_unicast+0x60f/0x830
? __pfx_netlink_unicast+0x10/0x10
? __pfx___alloc_skb+0x10/0x10
netlink_sendmsg+0x6ea/0xbc0
? __pfx_netlink_sendmsg+0x10/0x10
? __futex_queue+0x10b/0x1f0
____sys_sendmsg+0x7a2/0x950
? copy_msghdr_from_user+0x26b/0x430
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
___sys_sendmsg+0xf8/0x180
? __pfx____sys_sendmsg+0x10/0x10
? __pfx_futex_wait+0x10/0x10
? fdget+0x2e4/0x4a0
__sys_sendmsg+0x11f/0x1c0
? __pfx___sys_sendmsg+0x10/0x10
do_syscall_64+0xe2/0x570
? exc_page_fault+0x66/0xb0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This fix may be combined with another one in the ethtool subsystem:
https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u
Fixes: d43c65b05b ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260324224607.374327-1-alex.popov@linux.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Translate the remaining part of the "Describe your changes" section in
Documentation/translations/ja_JP/process/submitting-patches.rst.
Follow review comments on wording and line wrapping, and cover guidance
on self-contained patch descriptions, imperative mood, commit
references, and Link:/Closes:/Fixes: tags.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260309105015.309116-1-weibu@redadmin.org>
Translate the KVM x86 maintainer guidelines (maintainer-kvm-x86.rst)
into Portuguese (pt_BR). This document covers the specific
workflow, coding style, and testing requirements for the
KVM x86 subsystem.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260323171133.88074-3-danielmaraboo@gmail.com>
Translate the Linux kernel project continuity documentation (conclave.rst)
into Portuguese (pt_BR). Also, update the main pt_BR index to include
the link to the new translation.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260323171133.88074-2-danielmaraboo@gmail.com>
The xfstests' test-case generic/523 fails to execute
correctly:
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc4+ #8 SMP PREEMPT_DYNAMIC Thu May 1 16:43:22 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/523 - output mismatch (see xfstests-dev/results//generic/523.out.bad)
The test-case expects to have '/' in the xattr name.
However, HFS+ unicode logic makes conversion of '/'
into ':'. In HFS+, a filename can contain '/' because
':' is the separator. The slash is a valid filename
character on macOS. But on Linux, / is the path separator
and it cannot appear in a filename component. But xattr
name can contain any of these symbols. It means that
this unicode logic conversion doesn't need to be executed
for the case of xattr name.
This patch adds distinguishing the regular and xattr names.
If we have a regular name, then this conversion of special
symbols will be executed. Otherwise, the conversion is skipped
for the case of xattr names.
sudo ./check -g auto
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.0.0-rc1+ #24 SMP PREEMPT_DYNAMIC Fri Mar 20 12:36:49 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
<skipped>
generic/523 33s ... 25s
<skipped>
Closes: https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/178
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260324003949.417048-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
By having the logger stored there, any code using CTokenizer can
log messages there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <467979dc18149e4b2a7113c178e0cb07919632f2.1774256269.git.mchehab+huawei@kernel.org>
This is mandatory, but if it is missing, we need to know what
symbol had problems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <0c3d9dd25889784b999efdb354ade48264c0e03c.1774256269.git.mchehab+huawei@kernel.org>
Instead of always using a name with a number on it, use
the name of the object directly whenever possible.
When the name is already used, append a number prefix at
the end.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <d1c4cd94547d843af0debf9e317e006d55d705f1.1774256269.git.mchehab+huawei@kernel.org>
The current logic was storing symbols source code on a list,
not linked to the actual KdocItem. While this works fine when
kernel-doc markups are OK, on places where there is a "/**"
without a valid kernel-doc markup, it ends that the 1:1 match
between source code and KdocItem doesn't happen, causing
problems to generate the YAML output.
Fix it by storing the source code directly into the KdocItem
structure.
This shouldn't affect performance or memory footprint, except
when --yaml option is used.
While here, add a __repr__() function for KdocItem, as it
helps debugging it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <77902dafabb5c3250486aa2dc1568d5fafa95c5b.1774256269.git.mchehab+huawei@kernel.org>
Fix check for simple table delimiters.
ReST simple tables use "=" instead of "-". I ended testing it with
a table modified from a complex one, using "--- --- ---", instead
of searching for a real Kernel example.
Only noticed when adding an unit test and seek for an actual
example from kernel-doc markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <dea95337c05040f95e5a95ae41d69ddef0aaa8d6.1774256269.git.mchehab+huawei@kernel.org>
Add extra tests to check if the new "var" type is properly
handled and to cover mutex context annotations.
Co-developed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <75af93a45151b630c94b7f77637d173e6119fd41.1774256269.git.mchehab+huawei@kernel.org>
The strings representation is not ok, currently. Add a helper
function to improve it, and drop blank lines at beginning and
at the end of the dumps
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <422041a8b49b2609de5749092fe074b7948c32a6.1774256269.git.mchehab+huawei@kernel.org>
Add an autodoc entry for the new kdoc_yaml_file module.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <32b86abe7acee2dd4f73a35836ec94e8690f04cd.1774256269.git.mchehab+huawei@kernel.org>
The test_kdoc_parser.py already supports loading dynamic tests
when running unit tests.
Add support to read from a different file. This is useful for:
- regression tests before/afer some changes;
- preparing new unit tests;
- test a different yaml before adding its contents at
tools/unittests/kdoc-test.yaml.
It should be noticed that passing an argument to a unit test
is not too trivial, as unittest core will load itself the
runner with a separate environment. The best (only?) way to
do it is by setting the system environment. This way, when
the class is called by the unit test loader, it can pick
the var from the environment without relying on a global
variable.
The unittest_helper has already provision for it, so let's
use its support.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <1d1a56de012c43756f9ca87aa9bf6c285674f113.1774256269.git.mchehab+huawei@kernel.org>
Ensure that we'll receive e-mails for attempts to touch
tools/unittests.
While here, place entries alphabetically sorted.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <6be396b8423372dd006484351ca2dbc54220587e.1774256269.git.mchehab+huawei@kernel.org>
The cpupower-info(1) man page only mentions the short form of the
'--perf-bias' option in the synopsys, but the long form is not documented
and its effect is not explained.
cpupower-info.c:
{"perf-bias", optional_argument, NULL, 'b'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-5-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
`cpupower frequency-info` supports the '--boost' option since the program
was first added with commit 7fe2f6399a ("cpupowerutils - cpufrequtils
extended with quite some features"), but the man page lacks it.
'--epp' has been added with commit 5f567afc28 ("cpupower: Add support for
showing energy performance preference") but it has never been added to the
man page.
cpufreq-info.c:
{"boost", no_argument, NULL, 'b'},
...
{"epp", no_argument, NULL, 'z'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-4-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The cpupower-frequency-info(1) man page describes a '--perf' option.
Even though this form is accepted by the program, its proper name is
'--performance'.
cpufreq-info.c:
{"performance", no_argument, NULL, 'c'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-3-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The cpupower-idle-info(1) man page describes '-f' as the short form of the
'--silent' option and '-e' as the short form of the '--proc' option.
But they are not correct:
$ cpupower idle-info -f
idle-info: invalid option -- 'f'
invalid or unknown argument
$ cpupower idle-info -e
idle-info: invalid option -- 'e'
invalid or unknown argument
The short form of '--silent' is actually '-s' and the short form of
'--proc' is actually '-o':
cpuidle-info.c:
{"silent", no_argument, NULL, 's'},
{"proc", no_argument, NULL, 'o'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-2-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[].
Fixes: baac6276c0 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard.
Fixes: 96298f6401 ("Bluetooth: L2CAP: handle l2cap config request during open state")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del().
Fixes: ab4eedb790 ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260
Fixes: 973bb97e5a ("Bluetooth: btintel: Add generic function for handling hardware errors")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the L2CAP channel mode is L2CAP_MODE_ERTM/L2CAP_MODE_STREAMING,
l2cap_publish_rx_avail will be called and le flow credits will be sent in
l2cap_chan_rx_avail, even though the link type is ACL.
The logs in question as follows:
> ACL Data RX: Handle 129 flags 0x02 dlen 12
L2CAP: Unknown (0x16) ident 4 len 4
40 00 ed 05
< ACL Data TX: Handle 129 flags 0x00 dlen 10
L2CAP: Command Reject (0x01) ident 4 len 2
Reason: Command not understood (0x0000)
Bluetooth: Unknown BR/EDR signaling command 0x16
Bluetooth: Wrong link type (-22)
Fixes: ce60b9231b ("Bluetooth: compute LE flow credits based on recvbuf space")
Signed-off-by: Zhang Chen <zhangchen01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some documentation pages contain long link text without natural
break points, which can force page-wide horizontal scroll overflow
on small screens.
Use overflow-wrap: anywhere for anchor text in the docs stylesheet so
links can wrap per character as a fallback when normal word boundaries
are unavailable.
Examples:
https://docs.kernel.org/6.15/firmware-guide/acpi/non-d0-probe.htmlhttps://docs.kernel.org/6.15/arch/x86/earlyprintk.html
Signed-off-by: Rito Rhymes <rito@ritovision.com>
Assisted-by: Codex:GPT-5.4
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260323152428.30483-1-rito@ritovision.com>
Some documentation pages contain docutils tables with reference links
that use long unbroken strings. Those strings can expand the table
width beyond the content column and cause page-wide horizontal
overflow.
Allow reference links in docutils tables in the main document body to
wrap when needed so the table stays within the content column and does
not break page layout.
Examples:
https://docs.kernel.org/6.15/arch/openrisc/openrisc_port.htmlhttps://docs.kernel.org/6.15/filesystems/ext2.html
Signed-off-by: Rito Rhymes <rito@ritovision.com>
Assisted-by: Codex:GPT-5.4
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260323152428.30483-2-rito@ritovision.com>
Some documentation pages contain long C API signatures that can exceed
the content width and cause page-wide horizontal scroll overflow.
Apply contained horizontal scrolling to C API description blocks and
keep their signature rows on one line. This preserves signature
formatting while preventing them from breaking page layout.
Contained horizontal scrolling is preferred over wrapping here because
code fidelity is the priority. These blocks are intended to remain
representative of the code itself. Wrapping distorts spacing and line
structure, which affects fidelity, creates misleading renderings, and
reduces readability.
Examples:
https://docs.kernel.org/6.15/driver-api/regulator.htmlhttps://docs.kernel.org/6.15/userspace-api/fwctl/fwctl-cxl.html
Signed-off-by: Rito Rhymes <rito@ritovision.com>
Assisted-by: Codex:GPT-5.4
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260323153342.33447-1-rito@ritovision.com>
Some documentation pages contain long inline literals in paragraph
text that can force page-wide horizontal scroll overflow and break
layout on smaller screens.
Override the default `span.pre` white-space behavior for inline
literals and use `overflow-wrap: anywhere` so they can wrap when
needed. For code used as part of a paragraph, wrapping is appropriate
because it is stylistically part of the surrounding text. Code blocks,
by contrast, are meant to preserve formatting fidelity and are better
served by contained horizontal scrolling.
Examples:
https://docs.kernel.org/6.15/userspace-api/futex2.htmlhttps://docs.kernel.org/6.15/security/IMA-templates.html
Signed-off-by: Rito Rhymes <rito@ritovision.com>
Assisted-by: Codex:GPT-5.4
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260323151401.27415-1-rito@ritovision.com>
