If memory access such as copy_{from, to}_kernel_nofault() failed, its
users do not know what happened, so it is very useful to print the
exception code for such cases. Furthermore, it is better to print the
caller function to know where is the entry.
Here are the low level call chains:
copy_from_kernel_nofault()
copy_from_kernel_nofault_loop()
__get_kernel_nofault()
copy_to_kernel_nofault()
copy_to_kernel_nofault_loop()
__put_kernel_nofault()
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Fix the warning:
BUG: using smp_processor_id() in preemptible [00000000] code: systemd/1
caller is larch_insn_text_copy+0x40/0xf0
Simply changing it to raw_smp_processor_id() is not enough: if preempt
and CPU hotplug happens after raw_smp_processor_id() but before calling
stop_machine(), the CPU where raw_smp_processor_id() has run may become
offline when stop_machine() and no CPU will run copy_to_kernel_nofault()
in text_copy_cb(). Thus guard the larch_insn_text_copy() calls with
cpus_read_lock() and change stop_machine() to stop_machine_cpuslocked()
to prevent this.
I've considered moving the locks inside larch_insn_text_copy() but
doing so seems not an easy hack. In bpf_arch_text_poke() obviously the
memcpy() call must be guarded by text_mutex, so we have to leave the
acquire of text_mutex out of larch_insn_text_copy(). But in the entire
kernel the acquire of mutexes is always after cpus_read_lock(), so we
cannot put cpus_read_lock() into larch_insn_text_copy() while leaving
the text_mutex acquire out (or we risk a deadlock due to inconsistent
lock acquire order). So let's fix the bug first and leave the posssible
refactor as future work.
Fixes: 9fbd18cf4c ("LoongArch: BPF: Add dynamic code modification support")
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 128-bit atomic cmpxchg implementation uses the SC.Q instruction.
Older versions of GNU AS do not support that instruction, erroring out:
ERROR:root:{standard input}: Assembler messages:
{standard input}:4831: Error: no match insn: sc.q $t0,$t1,$r14
{standard input}:6407: Error: no match insn: sc.q $t0,$t1,$r23
{standard input}:10856: Error: no match insn: sc.q $t0,$t1,$r14
make[4]: *** [../scripts/Makefile.build:289: mm/slub.o] Error 1
(Binutils 2.41)
So test support for SC.Q in Kconfig and disable the atomics if the
instruction is not available.
Fixes: f0e4b1b6e2 ("LoongArch: Add 128-bit atomic cmpxchg support")
Closes: https://lore.kernel.org/lkml/20260216082834-edc51c46-7b7a-4295-8ea5-4d9a3ca2224f@linutronix.de/
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
SoCs based on IPQ5210 is shipped under two different naming schemes namely
IPQ52xx and QCF2xxx/QCF3xxx. In the later variants Passive Optical Network
(PON) interface acts as the backhaul where as in the former it is
ethernet backhaul. Add the SoC IDs for the same.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313-b4-ipq5210_soc_ids-v1-2-97faae3fef95@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SoCs based on IPQ5210 is shipped under two different naming schemes namely
IPQ52xx and QCF2xxx/QCF3xxx. In the later variants Passive Optical Network
(PON) interface acts as the backhaul where as in the former it is
ethernet backhaul. Document the same.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313-b4-ipq5210_soc_ids-v1-1-97faae3fef95@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of defining a local macro with a custom name for the QMI
service identifier, use the one provided in qmi.h and remove the
locally defined macro.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-5-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of defining a local macro with a custom name for the QMI
service identifier, use the one provided in qmi.h and remove the
locally defined macro.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-9-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of defining a local macro with a custom name for the QMI
service identifier, use the one provided in qmi.h and remove the
locally defined macro.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-7-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
```
Reported-by: Oscar Santos <ossantos@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The QMI framework proposes a set of services which are defined by an
integer identifier. The different QMI client lookup for the services
via this identifier. Moreover, the function qmi_add_lookup() and
qmi_add_server() must match the service ID but the code in different
places set the same value but with a different macro name. These
macros are spreaded across the different subsystems implementing the
protocols associated with a service. It would make more sense to
define them in the QMI header for the sake of consistency and clarity.
This change use an unified naming for the services and enumerate the
ones implemented in the Linux kernel. More services can come later and
put the service ID in this same header.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-2-daniel.lezcano@oss.qualcomm.com
[bjorn: Lower case hex constants]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the mphy reset property to the devicetree bindings for the Rockchip
RK3576 UFS host controller. The mphy reset signal is used to reset the
physical adapter. Resetting other components while leaving the mphy unreset
may occasionally prevent the UFS controller from successfully linking up
with the device.
This addresses an intermittent hardware bug where the UFS link fails to
establish under specific timing conditions with certain chips. While
difficult to reproduce initially, this issue was consistently observed in
downstream testing and requires explicit mphy reset control for full
stability.
Although this change increases the maxItems for resets and adds a new entry
(which technically alters the binding ABI), it does not break compatibility
for existing Linux systems. The driver uses
devm_reset_control_array_get_exclusive() to manage resets, allowing it to
function correctly with both older Device Trees (without the mphy entry)
and newer ones.
Fixes: d90e920237 ("scsi: ufs: dt-bindings: Document Rockchip UFS host controller")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/1773368467-109650-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Eliza Platform.
The IP block version here is 6.0.0, exactly the same as on SM8650.
While MCQ reg range is also available on the already documented platforms,
enforce only starting with Eliza.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260311-eliza-bindings-ufs-v3-1-498b26864182@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The commit referenced in Fixes started evaluating the value of
alt_port->mux_ctrl before checking the active SVID. This led to
drm_aux_hpd_bridge_notify() no longer being called for the 'DP unplug'
case.
Perhaps somewhat interestingly, the firmware sends a notification with
SVID=DP, mux_ctrl=MUX_CTRL_STATE_NO_CONN and pin_assignment=0 on
unplug. 'pin_assignment' was previously interpreted as a bitfield
excerpt from the second byte of the DP pg_altmode payload (and stored
as an u8).
That value is used in pmic_glink_altmode_sc8280xp_notify(), decremented
by 1 (DPAM_HPD_A). Previously, this would result in an u8 underflow
that would rollover to 0xff (which prior to the Fixes patch would have
caused a pmic_glink_altmode_safe() and 'disconnected' bridge
notification). That check was removed, without a replacement.
Resolve this issue by making sure the SID=DP && mux_ctrl=NO_CONN combo
once again results in a HPD bridge notification.
Fixes: 0539c5a6fd ("soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications")
Reported-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260306-topic-pgaltmode_fixup-v1-1-ec154b2d8e89@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It looks element length declared in servreg_loc_pfr_req_ei for reason
not matching servreg_loc_pfr_req's reason field due which we could
observe decoding error on PD crash.
qmi_decode_string_elem: String len 81 >= Max Len 65
Fix this by matching with servreg_loc_pfr_req's reason field.
Fixes: 1ebcde047c ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20260129152320.3658053-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Replacing manual lock/unlock pairs with guard() removes the need to
think about unlocking entirely and keeps the function trivially
structured.
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-external_llcc_changes1set-v1-2-6347e52e648e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix incorrect slice activation/deactivation accounting by replacing the
bitmap-based activation tracking with per-slice atomic reference counters.
This resolves mismatches that occur when multiple client drivers vote for
the same slice or when llcc_slice_getd() is called multiple times.
As part of this fix, simplify slice descriptor handling by eliminating
dynamic allocation. llcc_slice_getd() now returns a pointer to a
preallocated descriptor, removing the need for repeated allocation/free
cycles and ensuring consistent reference tracking across all users.
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Signed-off-by: Francisco Munoz Ruiz <francisco.ruiz@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-external_llcc_changes1set-v1-1-6347e52e648e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A few lines of code are removed by using the global non-NULL of_root
pointer to access the root device tree node instead of its recalculation.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224110213.3929063-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add system cache table and configs for the SDM670 SoC.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260210021957.13357-3-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Last Level Cache Controller on SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260210021957.13357-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
smp2p v2 adds support for allowing remote processors to write outbound
smp2p items without completing the feature negotiation. This is required
for processors that start before linux to write out signals like error
and clock ready and unblock their bootup.
If a remote processor only supports v1, smp2p can version down by
mirroring the peer version during the negotiation stage.
When using smp2p version 2, the remote does not wait for the ssr ack
before setting the items. To accommodate this, set the last_value of all
the entries to 0 when SSR is detected. This forces smp2p to detect the
new values written by the remote. Because the SSR ack is skipped, the
down transition of bits is missed in smp2p version 2.
Signed-off-by: Chris Lew <chris.lew@oss.qualcomm.com>
Signed-off-by: Deepak Kumar Singh <deepak.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-smp2pv2-v3-2-4060b859b1e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A remoteproc booted during earlier boot stages such as UEFI or the
bootloader, may need to be attached to without restarting the remoteproc
hardware. To do this the remoteproc will need to check the ready and
handover states in smp2p without an interrupt notification. Create
qcom_smp2p_start_in() to initialize the shadow state without notifying
clients because these early events happened in the past.
Add support for the .irq_get_irqchip_state callback so remoteproc can
read the current state of the fatal, ready and handover bits.
Signed-off-by: Chris Lew <chris.lew@oss.qualcomm.com>
Signed-off-by: Deepak Kumar Singh <deepak.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-smp2pv2-v3-1-4060b859b1e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
devm_clk_get_enabled() and devm_clk_hw_get_clk() return error pointers
on failure and never return NULL. So IS_ERR_OR_NULL() is unnecessary,
replace them with IS_ERR().
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260308-spisg-1-v1-1-4e209faf228d@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver currently loads firmware from a hardcoded path. Support
loading device specific firmware when provided by the boot firmware.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20260311-aw88166-fw-v2-1-8ef30dae3657@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces some infrastructure to allow platform drivers
to specify what a DAI should be doing when it is not active on the
bus. The primary use case for this is configuring bus keepers which
may be integrated into various codecs. The instigating use case for
this functionality is an interesting bus topology on Apple Silicon
laptops with multiple codecs.
Most Apple Silicon laptops have six codecs split into groups of
three, driving a pair of dual opposed woofers and a tweeter for
L/R stereo sound. These codecs report the voltage and current across
their connected voice coils back to the SoC via the SDOUT pin,
represented as PCM data sent via configurable TDM slots. This data is
used in conjunction with the connected speaker's Thiele/Small Parameters
to ensure that the speaker is not being driven to levels that would
permanently damage them. This is integrated into CoreAudio on macOS.
speakersafetyd[1] handles this for Linux.
All of the codec SDOUT pins are attached to a single receiver port
on the SoC's I2S peripheral, however are split across two physical
data lines (one each for the left and right codec groups). The receiver
has an OR gate in front of it, which is used to sum the two lines.
If at any point a codec is trying to transmit data, and the "opposite"
line ends up floating high, the transmitting codec's data will be
corrupted. We need to guarantee that the idle line stays idle.
In the downstream Asahi Linux kernel[2], we set up one codec in each
group to zero-fill or pull down its line while a codec on the opposite
line is actively transmitting. This is done entirely in the codec
driver, however this approach is over-fit for this one use case. This
sort of functionality may also be of use for other hardware, so following
previous mailing list discussions[3], I have tried to expose the
functionality in a more configurable and generic way.
I have integrated this approach into our downstream platform driver
and select Devicetrees as an example of how this mechanism is intended
to be used[4].
[1] https://github.com/AsahiLinux/speakersafetyd
[2] https://github.com/AsahiLinux/linux/tree/bits/070-audio
[3] https://lore.kernel.org/asahi/20250227-apple-codec-changes-v3-17-cbb130030acf@gmail.com/
[4] https://github.com/chadmed/tree/tdm-revised2
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-0-c6ac5351489a@gmail.com
TAS2770 includes a bus keeper which can be used to control the behaviour
of the SDOUT pin during specified TDM slots. The chip can either pull
the pin to ground, actively transmit zeroes, or keep the pin floating
(default/uninitialised behaviour).
Expose the bus keeper via the set_tdm_idle DAI op so that it can be
configured by consumers.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-7-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2764, and the Apple-exclusive variant SN012776, include bus keepers
on the SDOUT pin that can be configured to alter the behaviour of the
SDOUT pin during specified TDM slots. The chip can either leave the
bus floating (default/uninitialised behaviour) or fill the specified
slots with zeroes.
Expose the SDOUT bus keeper and allow it to be configured using the
set_tdm_idle DAI op. The mask must be cropped to only cover slots
valid for the configured BCLK ratio, so introduce a set_bclk_ratio
op that properly configures this.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-6-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio devices, like certain Texas Instruments codecs, integrate
configurable bus keepers that dictate the codec's behaviour during
idle TDM slots. Now that we have definitions for various idle modes,
add a snd_soc_dai_set_tdm_idle() operation to control this in a
standardised way.
This is useful on Apple Silicon laptops, where a single I2S bus is
comprised of two physical lines which are ORed just before the
receiving port. When a codec on one line is transmitting, we must
guarantee that the other line is low. We can achieve this by
configuring one codec on each line to use its bus keeper to fill
its line with zeroes during the active slots of the other line.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-5-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio devices, such as certain Texas Instruments codecs,
include configurable bus keepers. We currently don't have
a standardised way to configure such hardware, and instead
rely on the hardware initialising setting itself up into a
sane state. There are situations where this is insufficient,
however, and some platforms require more concrete guarantees
as to the state of the bus, and being able to explicitly
configure bus keepers enables this.
For example, some Apple Silicon machines have an odd bus topology where
the SDOUT pins of all codecs are split across two data lines, which
are summed via an OR gate in front of the receiving port on the
SoC's I2S peripheral. Each line must transmit 0 while a codec
on the other line is actively transmitting data, or the SoC
will receive garbage data. To do this, one codec on each line
must be configured to transmit zeroes during the other line's
active TDM slots.
Thus, we define seven possible bus-keeping modes that a device can
be in: NONE (UB/as initialised), OFF (explicitly disabled), ZERO
(actively transmit a 0), PULLDOWN, HIZ (floating), PULLUP, and
DRIVE_HIGH.
These will be consumed by CODEC/CPU drivers via a common DAI
op, enabling the explicit configuration of bus keepers where
required.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-4-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add properties to describe TDM slot idle behaviour. These properties can
be used to describe how a DAI is supposed to behave when not active.
For example, Apple Silicon laptops split a single I2S bus between two
physical lines which are combined at an OR gate in front of the
receiving port. One codec on each line is expected to transmit zeroes
during the active TDM slots of the opposite line, or we will have corrupted
data at the receiver.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-3-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ensure that all references to tdm-slot.txt have been updated to
tdm-slot.yaml, and are schema-compliant.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-2-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260314-asoc-amd-v1-5-31afed06e022@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260314-asoc-amd-v1-4-31afed06e022@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260314-asoc-amd-v1-3-31afed06e022@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260314-asoc-amd-v1-2-31afed06e022@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260314-asoc-amd-v1-1-31afed06e022@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l49 is an audio codec with integrated MIPI SoundWire interface
(Version 1.2.1 compliant) with SDCA v1.0 support, I2C, and I2S/TDM
interfaces designed for portable applications.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260313160858.2022849-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l49 is an audio codec with integrated MIPI SoundWire interface
(Version 1.2.1 compliant) with SDCA v1.0 support, I2C, and I2S/TDM
interfaces designed for portable applications.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260313160858.2022849-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ctlr is allocated using devm_spi_alloc_host(), which automatically
handles reference counting via the devm framework.
Calling spi_controller_put() manually in the probe error path is
redundant and results in a double-free.
Fixes: e75a6b00ad ("spi: axiado: Add driver for Axiado SPI DB controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260302-axiado-v1-1-1132819f1cb7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an ACP70 SoundWire machine entry for ASUS PX13
(HN7306EA/HN7306EAC) with rt721 and two TAS2783 amps on link1.
Describe rt721 with jack/DMIC endpoints on this platform and add
explicit left/right TAS2783 speaker endpoint mapping via name prefixes.
Signed-off-by: Hasun Park <hasunpark@gmail.com>
Link: https://patch.msgid.link/20260308151654.29059-3-hasunpark@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some ASUS ProArt PX13 systems expose ACP ACPI config flags that can
select a non-working fallback path.
Add a DMI override in snd_amd_acp_find_config() for ACP70+ boards and
return 0 so ACP ACPI flag-based selection is skipped on this platform.
This keeps machine driver selection on the intended SoundWire path.
Signed-off-by: Hasun Park <hasunpark@gmail.com>
Link: https://patch.msgid.link/20260308151654.29059-2-hasunpark@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A previous change added NULL checks and cleanup for allocation
failures in sma1307_setting_loaded().
However, the cleanup for mode_set entries is wrong. Those entries are
allocated with devm_kzalloc(), so they are device-managed resources and
must not be freed with kfree(). Manually freeing them in the error path
can lead to a double free when devres later releases the same memory.
Drop the manual kfree() loop and let devres handle the cleanup.
Fixes: 0ec6bd1670 ("ASoC: sma1307: Add NULL check in sma1307_setting_loaded()")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260313040611.391479-1-lgs201920130244@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In aml_spisg_probe(), ctlr is allocated by
spi_alloc_target()/spi_alloc_host(), but fails to call
spi_controller_put() in several error paths. This leads
to a memory leak whenever the driver fails to probe after
the initial allocation.
Convert to use devm_spi_alloc_host()/devm_spi_alloc_target()
to fix the memory leak.
Fixes: cef9991e04 ("spi: Add Amlogic SPISG driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260308-spisg-v1-1-2cace5cafc24@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver uses devm_clk_get_enabled() which enables the clock and
registers a callback to automatically disable it when the device
is unbound.
Remove the redundant aml_sfc_disable_clk() call in the error paths
and remove callback.
Fixes: 4670db6f32 ("spi: amlogic: add driver for Amlogic SPI Flash Controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260308-spifc-a4-1-v1-1-77e286c26832@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>