There is a timeout failure been found during stress tests. If the firmware
generates a mailbox response right after driver clears the mailbox channel
interrupt register, the hardware will not generate an interrupt for the
response. This causes the unexpected mailbox command timeout.
To handle this failure, driver checks the interrupt register before
exiting mailbox_rx_worker(). If there is a new response, driver goes back
to process it.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226161810.4188334-1-lizhi.hou@amd.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ7bn6AAKCRAnX84Zoj2+
djJnAX9XDHzW0CCJnF8UopQearYcn2DPKrXvLKWwwpSothyoOFiIHyifP7fHlQBX
XA5+iIQBf1RZq3uTeqbaq3DeD0Pf9LrRUC41g3H7HO9Lt0/Bp2dnRqJJgZVxIg+h
57yAKxQ5Cw==
=PwGs
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
An reset signal polarity fix for the jd9365da-h3 panel, a folio handling
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220-glorious-cockle-of-might-5b35f7@houat
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Add the missing include.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
It is required by firmware to wait up to 2 seconds for pending commands
before sending the destroy hardware context command. After 2 seconds
wait, if there are still pending commands, driver needs to cancel them.
So the context destroy steps need to be:
1. Stop drm scheduler. (drm_sched_entity_destroy)
2. Wait up to 2 seconds for pending commands.
3. Destroy hardware context and cancel the rest pending requests.
4. Wait all jobs associated with the hwctx are freed.
5. Free job resources.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124173536.148676-1-lizhi.hou@amd.com
drm_sched_init() has a great many parameters and upcoming new
functionality for the scheduler might add even more. Generally, the
great number of parameters reduces readability and has already caused
one missnaming, addressed in:
commit 6f1cacf4eb ("drm/nouveau: Improve variable name in
nouveau_sched_init()").
Introduce a new struct for the scheduler init parameters and port all
users.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv
Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched
Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
Add power_profile firmware boot param and set it to 0 by default
which is default FW power profile.
Implement IVPU_TEST_MODE_D0I2_DISABLE which is used for setting
power profile boot param value to 1 which prevents NPU from entering
d0i2 power state.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-7-jacek.lawrynowicz@linux.intel.com
Add IVPU_TEST_MODE_CLK_RELINQ_[DISABLE|ENABLE] that overrides
workaround for disabling clock relinquish for testing purposes.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-6-jacek.lawrynowicz@linux.intel.com
Use ivpu_gem_prime_import() based on drm_gem_prime_import_dev()
for importing buffers, removing optimization for same device
imports. This optimization reused the same ivpu_bo object in multiple
contexts but a single buffer can be MMU-mapped only to a single context.
Each import now creates a new instance of ivpu_bo object that shares
the same sg_table but have separate MMU mappings.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-5-jacek.lawrynowicz@linux.intel.com
Add debugfs interface to modify following priority bands properties:
* grace period
* process grace period
* process quantum
This allows for the adjustment of hardware scheduling algorithm parameters
for each existing priority band, facilitating validation and fine-tuning.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-4-jacek.lawrynowicz@linux.intel.com
Increment the runtime PM counter when entering
ivpu_context_abort_work_fn() to prevent the device
from suspending while the function is executing.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-3-jacek.lawrynowicz@linux.intel.com
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ6R9jwAKCRAnX84Zoj2+
drO1AYCRRlokrTPy9jqL1EFfpvI7aqq02jA/87CcaDd19DS2phZyx6UEAIMFaXdp
E+fNafgBgKg5Wi64Ht7gyjJaI+FZv9qSXBo/9YMAk98xGstdT9HJ23nVHSeQ17XV
HKo7LM3Crw==
=WODG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-02-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-encouraging-judicious-quoll-adc1dc@houat
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
Recovery work doesn't need to be bound to any specific CPU, so move it
to unbound workqueue to improve execution time and system latency.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-7-jacek.lawrynowicz@linux.intel.com
Recovery now works on fpga. JSM state dump timeout needs to
be really long for the new fpga model releases.
Enable punit on fpga.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-6-jacek.lawrynowicz@linux.intel.com
Hardware scheduling (HWS) is supposed to be supported on all existing
platform with recent FW including pre-silicon ones. Turn on HWS by
default.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-5-jacek.lawrynowicz@linux.intel.com
Move the ivpu_mmu_discard_events() function to the common portion of
the abort work function. This ensures it is called only once, even if
there are no faulty contexts in context_xa, to guarantee that MMU events
are discarded and new events are not missed.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-4-jacek.lawrynowicz@linux.intel.com
Call pm_runtime_mark_last_busy() in top half of IRQ handler to prevent
device from being runtime suspended before bottom half is executed on
a workqueue.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-3-jacek.lawrynowicz@linux.intel.com
Introduces the capability to simulate hardware faults for testing
purposes. The new `fail_hw` fault can be injected in
`ivpu_hw_reg_poll_fld()`, which is used in various parts of the driver
to wait for the hardware to reach a specific state. This allows to test
failures during NPU boot and shutdown, IPC message handling and more.
Fault injection can be enabled using debugfs or a module parameter.
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-2-jacek.lawrynowicz@linux.intel.com
Disable runtime PM for the duration of reset/recovery so it is possible
to set the correct runtime PM state depending on the outcome of the
`ivpu_resume()`. Don’t suspend or reset the HW if the NPU is suspended
when the reset/recovery is requested. Also, move common reset/recovery
code to separate functions for better code readability.
Fixes: 27d19268cf ("accel/ivpu: Improve recovery and reset support")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-4-jacek.lawrynowicz@linux.intel.com
pm_runtime_resume_and_get() sets dev->power.runtime_error that causes
all subsequent pm_runtime_get_sync() calls to fail.
Clear the runtime_error using pm_runtime_set_suspended(), so the driver
doesn't have to be reloaded to recover when the NPU fails to boot during
runtime resume.
Fixes: 7d4b4c7443 ("accel/ivpu: Remove suspend_reschedule_counter")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-3-jacek.lawrynowicz@linux.intel.com
Add basic support for the new AIC200 product. The PCIe Device ID is
0xa110. With this, we can turn on the lights for AIC200 by leveraging
much of the existing driver.
Co-developed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-8-quic_jhugo@quicinc.com
As the number of cards supported by the driver grows, their
configurations will differ. The driver needs to become more dynamic
to support these configurations. Currently, each card may differ in
the exposed BARs, the regions they map to, and the family.
Create config structs for each card, and let the driver configure the
qaic_device struct based on the configurations passed to the driver.
Co-developed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-7-quic_jhugo@quicinc.com
During the initialization of the qaic device, pci_select_bars() is
used to fetch a bitmask of the BARs exposed by the device. On devices
that have Virtual Functions capabilities, the bitmask includes SR-IOV
BARs.
Use a mask to filter out SR-IOV BARs if they exist.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-6-quic_jhugo@quicinc.com
AIC200 device will support MSI-X while AIC100 devices will keep using
MSI. pci_alloc_irq_vectors() will try to allocate MSI-X vectors if it
is supported by the target device, otherwise, it will fallback to MSI.
Add support for MSI-X vectors allocation for AIC200 devices.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-5-quic_jhugo@quicinc.com
Devices use 1 MSI vector for the MHI controller and as many vectors as
the DMA bridge channels on the device. During the probing of the
device, the driver allocates 32 MSI vectors, which is usually more
than what is needed for AIC100 devices, which is wasting resources.
Allocate only the needed number of MSI vectors per device.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-4-quic_jhugo@quicinc.com
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
aic100_image_table is currently defined as a "const char *" array,
this can potentially lead to the accidental modification of the
pointers inside. Also, checkpatch.pl gives a warning about it.
Change the type to a "const char * const" array to make the pointers
immutable, preventing accidental modification of the images' paths.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213185110.2469159-1-quic_jhugo@quicinc.com
Fix sparse warning:
symbol 'sched_ops' was not declared. Should it be static?
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113182617.1256094-2-lizhi.hou@amd.com
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-6-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org> (For tty)
Reviewed-by: Lyude Paul <lyude@redhat.com> (For nouveau)
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-7-ddfefd7e9f2a@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmd7BBQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGfEEH/3oyTWmD5DPX2lLp
SujyKrEs6bfMQTKKYHzuy8OvzDXkBpZiKXIsCgjF5sXwQVgB7KPfJwgjt5xLo3F3
NTehLGwII7bM8mSq3wHDMeNkyBle4VYA9XOR8tXj21j7aRt9S4U/vtXiYeD9BWhC
Y1p+1FXKfZf7TjNpu8lIl+zLjSFDjYwM8h72dIuHnrYeuFL88fnWwoNP/MFkk5Kk
ce3ol3EtFe/M4GbVOm7KfzEkbsEE6ES60O0suxwYDn+71EA6ExVHFBKqpQvfj71/
ynxWYIwMoiCZWtJ+ali1g/ms0OxG+ivH8+xasBYTcDICZMe/XGX5Yx+Wm5DH5/Ev
pGMyvbI=
=yrc7
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc6' into drm-next
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use highest buttress VPU_STATUS register bits(15:13) that encode
platform type as follows:
0 - Silicon
2 - Simics
3 - FPGA
4 - Hybrid SLE
Remove old DMI based method.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-14-maciej.falkowski@linux.intel.com
Mark as invalid context of a job that returned HW context violation
error and queue work that aborts jobs from faulty context.
Add engine reset to the context abort thread handler to not only abort
currently executing jobs but also to ensure NPU invalid state recovery.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-13-maciej.falkowski@linux.intel.com
Fix deadlock in job submission and abort handling.
When a thread aborts currently executing jobs due to a fault,
it first locks the global lock protecting submitted_jobs (#1).
After the last job is destroyed, it proceeds to release the related context
and locks file_priv (#2). Meanwhile, in the job submission thread,
the file_priv lock (#2) is taken first, and then the submitted_jobs
lock (#1) is obtained when a job is added to the submitted jobs list.
CPU0 CPU1
---- ----
(for example due to a fault) (jobs submissions keep coming)
lock(&vdev->submitted_jobs_lock) #1
ivpu_jobs_abort_all()
job_destroy()
lock(&file_priv->lock) #2
lock(&vdev->submitted_jobs_lock) #1
file_priv_release()
lock(&vdev->context_list_lock)
lock(&file_priv->lock) #2
This order of locking causes a deadlock. To resolve this issue,
change the order of locking in ivpu_job_submit().
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-12-maciej.falkowski@linux.intel.com
Fix deadlock caused by inversed locking order in ivpu_job_submit()
and ivpu_cmdq_destroy_ioctl(). Both functions operate locking
file_priv->lock and submitted_jobs_lock.
Unlock file_priv->lock in ivpu_cmdq_destroy_ioctl() before calling
ivpu_cmdq_abort_all_jobs() function which locks submitted_jobs_lock.
That way locking order is maintained:
1) global submitted_jobs_lock first
2) per context file_priv->lock second
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-11-maciej.falkowski@linux.intel.com
Control explicit command queue management capability bit based on
scheduling mode. Capability will be available only when hardware
scheduling mode is set.
There is no point of allowing user space to create and destroy command
queues with OS schedling mode because FW does not support all required
functionalities for correct command queue management with OS scheduling.
Return -ENODEV from command queue create/destroy/submit IOCTLs.
Remove is_valid field from struct ivpu_job_cmdq
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-10-maciej.falkowski@linux.intel.com
Generate recovery when fault from reserved context is detected.
Add Abort (A) bit to reserved (1) SSID to ensure NPU also receives a fault.
There is no way to create a file_priv with reserved SSID
but it is still possible to receive MMU faults from that SSID
as it is a default NPU HW setting. Such situation will occur if
FW freed context related resources but still performed access to DRAM.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-9-maciej.falkowski@linux.intel.com
To prevent looping infinitely in MMU event handler we stop
generating new events by removing 'R' (record) bit from context
descriptor, but to ensure this change has effect KMD has to perform
configuration invalidation followed by sync command.
Because of that move parts of the interrupt handler that can take longer
to a thread not to block in interrupt handler for too long.
This includes:
* disabling event queue for the time KMD updates MMU event queue consumer
to ensure proper synchronization between MMU and KMD
* removal of 'R' (record) bit from context descriptor to ensure no more
faults are recorded until that context is destroyed
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-8-maciej.falkowski@linux.intel.com
Stop dumping consecutive faults from an already faulty context immediately,
instead of waiting for the context abort thread handler (IRQ handler bottom
half) to abort currently executing jobs.
Remove 'R' (record events) bit from context descriptor of a faulty
context to prevent future faults generation.
This change speeds up the IRQ handler by eliminating the need to print the
fault content repeatedly. Additionally, it prevents flooding dmesg with
errors, which was occurring due to the delay in the bottom half of the
handler stopping fault-generating jobs.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-7-maciej.falkowski@linux.intel.com
Convert IRQ bottom half from the thread handler into workqueue.
This increases a stability in rare scenarios where driver on
debugging/hardening kernels processes IRQ too slow and misses
some interrupts due to it.
Workqueue handler also gives a very minor performance increase.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-6-maciej.falkowski@linux.intel.com
