Commit graph

286,444 commits

Author SHA1 Message Date
Bhaktipriya Shridhar
34708a0ce8 Staging: iio: accel: sca3000: Fixed NULL comparison style
The variable u8 **rx_p, is a pointer-to-pointer and hence the check
should
be "if (!*rx_p)" and not "if (!rx_p)".
In the earlier version, checkpatch.pl gave the following check, which
was incorrect:
CHECK: Comparison to NULL could be written "!rx_p"
+       if (*rx_p == NULL) {

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-19 16:40:55 +00:00
Marc Titinger
75e1a3a789 iio: ina2xx: fix channel order in software buffer
POWER and CURRENT were swapped out in the buffer:
was current2 and power3, correct order is power2 and current3.

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-19 15:06:28 +00:00
Anshul Garg
c34c18195d iio/inkern.c Use list_for_each_entry_safe
Use list_for_each_entry_safe instead of list_for_each_safe
and list_entry call.

Signed-off-by: Anshul Garg <aksgarg1989@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 17:23:37 +00:00
Haibo Chen
16846ebeff iio: adc: add IMX7D ADC driver support
Freescale i.MX7D soc contains a new ADC IP. This patch add this ADC
driver support, and the driver only support ADC software trigger.

Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:25:41 +00:00
Marc Titinger
46294cd948 iio: ina2xx: give the capture kthread a more useful name string.
PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
  144     2 root     DW       0   0%  33% [ina226:1-8800us]
  141     2 root     DW       0   0%  25% [ina226:0-8800us]
   40     2 root     SW       0   0%  15% [irq/156-4802a00]
  147     2 root     DW       0   0%   7% [ina226:2-8800us]
  145     1 root     S     1236   0%   6% dd if /dev/iio:device1 of /dev/null
  148     1 root     S     1236   0%   4% dd if /dev/iio:device2 of /dev/null
  149   137 root     R     1244   0%   3% top -d 1
  142     1 root     S     1236   0%   2% dd if /dev/iio:device0 of /dev/null

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:08:37 +00:00
Marc Titinger
b17dc40155 iio: ina2xx: re-instate a sysfs show/store for the shunt resistor value
Different probe modules use different resistor values. The front-end
application may read a probe ID (from eeprom) and set the shunt value
accordingly.

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:08:13 +00:00
Marc Titinger
f9993c0771 iio: ina2xx: provide a sysfs parameter to allow async readout of the ADCs
This can lead to repeated or skipped samples depending on the clock beat
between the capture thread and the chip sampling clock, but will also spare
reading/waiting for the Capture Ready Flag and improve the available i2c
bandwidth for reading measurements.

Output of iio_info:
...snip...
4 device-specific attributes found:
  attr 0: in_oversampling_ratio value: 4
  attr 1: in_allow_async_readout value: 0
  attr 2: integration_time_available value: 140 204 332 588 1100 2116...
  attr 3: in_sampling_frequency value: 114

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:07:41 +00:00
Marc Titinger
c43a102e67 iio: ina2xx: add support for TI INA2xx Power Monitors
in SOFTWARE buffer mode, a kthread will capture the active scan_elements
into a kfifo, then compute the remaining time until the next capture tick
and do an active wait (udelay).

This will produce a stream of up to fours channels plus a 64bits
timestamps (ns).

Tested with ina226, on BeagleBoneBlack.

Datasheet: http://www.ti.com/lit/gpn/ina226

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:07:36 +00:00
Matt Ranostay
466df4d0c1 iio: chemical: add AMS iAQ-core support
Add support for AMS iAQ-core continuous and pulsed VOC sensors.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 15:07:38 +00:00
Matt Ranostay
4d33615df5 iio: light: add MAX30100 oximeter driver support
MAX30100 is an heart rate and pulse oximeter sensor that works using
two LEDS of different wavelengths, and detecting the light reflected
back.

This patchset adds support for both IR and RED LED channels which can
be processed in userspace to determine heart rate and blood oxygen
levels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 12:14:37 +00:00
Oliver Stäbler
b41fa86b67 iio:adc128s052: add support for adc124s021
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 12:08:17 +00:00
Arnd Bergmann
9ab655a32e staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
The iio dummy code was recently changed to use irq_work_queue, but
that code is compiled into the kernel only if IRQ_WORK is set, so
we can get a link error here:

drivers/built-in.o: In function `iio_evgen_poke':
(.text+0x208a04): undefined reference to `irq_work_queue'

This changes the Kconfig file to match what other drivers do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fd2bb310ca ("Staging: iio: Move evgen interrupt generation to irq_work")
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 17:33:39 +00:00
Robert Kmiec
ec0096f853 iio: st_accel_core: Remove unneeded define
Definition of ST_SENSORS_WAI_ADDRESS was introduced within a very
first commit of this driver, but it was never used.
This address is already defined as ST_SENSORS_DEFAULT_WAI_ADDRESS
in include/linux/iio/common/st_sensors.h

To avoid duplication of the same constant in two different places
called almost exactly the same, the one which was never used
should be removed.

Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 17:28:31 +00:00
Matt Ranostay
366e65633c iio: proximity: lidar: optimize i2c transactions
Optimize device tranactions using i2c transfers versus multiple
possibly racey i2c_smbus_* function calls, and only one transaction
for distance measurement. Falls back to smbus method if i2c
functionality isn't available.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 16:40:48 +00:00
Jonathan Cameron
8d6c16dd72 iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
This exported element needs to be accesible to all drivers using configfs
within IIO.  Previously it was in the sw_trig.h file which only convered one
such usecase.  This also fixes a sparse warning as it is now in a header
that makes sense to include from industrialio-configfs.c

Signed-off-by: Jonathan Cameron < jic23@kernel.org>
2015-12-05 16:25:30 +00:00
Matt Ranostay
93e87d73cc iio: chemical: vz89x: rework i2c transfer reading
Add an optimized i2c transfer reading function, and fallback
to racey smbus transfers if client->adapter doesn't support this.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:31:12 +00:00
Daniel Baluta
ac5006a2a5 iio: trigger: Introduce IIO hrtimer based trigger
This patch registers a new IIO software trigger interrupt source
based on high resolution timers.

Notice that if configfs is enabled we create sampling_frequency
attribute allowing users to change hrtimer period (1/sampling_frequency).

The IIO hrtimer trigger has a long history, this patch is based on
an older version from Marten and Lars-Peter.

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:19:27 +00:00
Daniel Baluta
b662f809d4 iio: core: Introduce IIO software triggers
A software trigger associates an IIO device trigger with a software
interrupt source (e.g: timer, sysfs). This patch adds the generic
infrastructure for handling software triggers.

Software interrupts sources are kept in a iio_trigger_types_list and
registered separately when the associated kernel module is loaded.

Software triggers can be created directly from drivers or from user
space via configfs interface.

To sum up, this dynamically creates "triggers" group to be found under
/config/iio/triggers and offers the possibility of dynamically
creating trigger types groups. The first supported trigger type is
"hrtimer" found under /config/iio/triggers/hrtimer.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:19:27 +00:00
Daniel Baluta
8261d961d1 iio: core: Introduce IIO configfs support
This patch creates the IIO configfs root group. The group
will appear under <mount-point>/iio/, usually /config/iio.

We introduce configfs support in IIO in order to be able to easily
create IIO objects from userspace. The first supported IIO objects
are triggers introduced with next patches.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Tested-by: Matt Ranostay <matt.ranostay@intel>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:19:24 +00:00
Nizam Haider
7221819ac4 Staging: iio: frequency: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:06 +00:00
Nizam Haider
a260527f83 Staging: iio: light: tsl2x7x_core: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:06 +00:00
Nizam Haider
22b19ab3e2 Staging: iio: adc: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:05 +00:00
Adriana Reus
f0e5f57d3a iio: light: us8152d: Add power management support
Add power management for sleep as well as runtime pm.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:05 +00:00
Adriana Reus
a22a3c5c40 iio: light: us5182d: Add functions for selectively enabling als and proximity
Keep track of the als and px enabled/disabled status in
order to enable them selectively.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:04 +00:00
Adriana Reus
c3304c2123 iio: light: us5182d: Add property for choosing default power mode
This chip supports two power modes.
1. "one-shot" mode - the chip activates and executes one complete
conversion loop and then shuts itself down. This is the default mode
chosen for raw reads.
2. "continuous" mode - the chip takes continuous measurements.

Continuous mode is more expensive power-wise but may be more reliable.
Add a property so that if preferred, the default power mode for raw
reads can be set to continuous.
Separate one-shot enabling in a separate function that will be used
depending on the chosen power mode. Also create a function for
powering the chip on and off.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:03 +00:00
Sascha Hauer
78f16dbda5 iio: adc: mcp3422: Add mcp3421 support
The mcp3421 is the single channel variant of the mcp342x family. Support
is straight forward, only the channels array has to be added for this
chip.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:27:09 +00:00
Greg Kroah-Hartman
f3cf3fb7ec First set of new device support, features and cleanups for IIO in the 4.5 cycle
Usual mixed bag, but the big item perhaps in this series is the DMA buffer
 support added by Lars-Peter Clausen. It's been in the works for a long time
 and it will be interesting to see what hardware support shows up now that
 this is available.
 
 New core features + associate cleanup.
 * Add generic DMA buffer infrastructure
 * Add a DMAengine framework based buffer
  Also associated minor changes.
    - Set the device buffer watermark based on the minimum watermark for all
      attached buffers rather than just the 'primary' one.
    - iio_buffer_init - only set the watermark default if one hasn't already
      been provided.  This allows simple support for devices with a fixed
      watermark.
    - read only attribute for watermark on fixed watermark devices.
    - add explicit buffer enable/disable callbacks to allow the buffer to
      do more than trivial actions when it is being turned on and off.
 * IIO_VAL_INT support in write_raw_get_fmt function.
 
 New device support
 * Freescale MMA7455/7456L accelerometers
 * Memsic MXC6255XC accelerometer
 * ST lis2dh12 accelerometer
 * TI ADS8688 ADC
 * TI Palamas (twl6035/7) gpadc
 
 New driver features
 * mma8452
   - support either of the available interrupt pins to cope with the case
     where board layout has lead to a particular one being connected.
 
 Staging graduation
 * Dummy driver
   - this driver acts as both an example and a test device for those with
     out hardware to develop userspace code against.
 
 Cleanups and minor bits and bobs.
 * treewide
   - Sort out the ordering of iio_device_register/unregister vs runtime
     pm function calls so that it's all nice and consistent and not race
     prone.
   - Check sscanf return values.  None of the cases will actually happen as
     the strings are supplied internally, but best to be consistent on this.
 * ad7780
   - switch over to the gpio descriptor interface and remove the now unused
     platform data which gets rid of a header entirely.
 * ad7793
   - drop a pointless else statement.
 * at91_adc
   - Swap kmalloc_array in for a kmalloc doing the same job.
 * dummy
   - get rid of some commented out lines that snuck in during the move of
     the driver.
 * lm3533-als
   - Print an error message on provision of an invalid resistance.
 * mcp320x
   - Add compatible strings with vendor prefix and deprecate those with
     no vendor prefix.
 * mxs-lradc
   - Use BIT macro in various places rather than shifted ones.
 * pa12203001
   - Power off the chip if the registration fails.
 * pulsedlight-lidar-lite
   - add runtime PM support.
 * xilinx XADC
   - constify an iio_buffer_setup_ops structure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWUcmhAAoJEFSFNJnE9BaIyjYP/0A+CZMUqIGbYG9qFxnq7yYZ
 977Wt/gGI8+Jq5RwNw6gTfhp2GrCN+5gzDbE2mBEn94c6SKBrj2Q9trW1FQ+Nhfx
 9bZoyq3ZPRCV+efEDGfeK/JWRwv+V6IWwAF2J/iCPWpRMTEsIW5kM1JSO3ISlnma
 diyil1hefGTJY8aCqGApthfX4fyZK98oCV6zojxpCZfFPdsa+vf5n1RQ143odnOk
 6NSfXHYLI+2e+mJ1lw4GdpZdF+rF+7jWsUYC5EDNmvlIJYiKmm13whSQeWO0NHo8
 oD0pYboSIWnmdXx4s3RbWF2+Y28O1+oJDKZfXabB8DjVwtvlGnmWBRhgKji2e6E6
 Hhct83YbDWtEpbNkXcWpnc5v5ynmAMTYTxADhinTGUtVQh3Q4wWduuoHK6IyeI4s
 dbfpO2Wh6N/5k3a4UoA69IcI2DzPzb2sIFWpdS8wuNv5xDhV2OmmY2PjTfq2w+Qz
 hEoMCNDUG6rQAYf4auXK5JjhI4CaG/mz/qjIibTUqGODYECzQQyvq+c2Gdq0S8O/
 CUHOgui6aHbyuhWmXlEzhhkjuvBQZYaTxCA+LGMzy8w7UY9m4n5L/fX9M9IfFsMH
 NFCPrUfmxKPQj/mHlhu7KHaTMUlQ0pTqV5flSwqsjstZ2QddvI5EAKiLwIEhg7/2
 RpnOZoiFIxykduEYLxeh
 =CfCl
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.5 cycle

Usual mixed bag, but the big item perhaps in this series is the DMA buffer
support added by Lars-Peter Clausen. It's been in the works for a long time
and it will be interesting to see what hardware support shows up now that
this is available.

New core features + associate cleanup.
* Add generic DMA buffer infrastructure
* Add a DMAengine framework based buffer
 Also associated minor changes.
   - Set the device buffer watermark based on the minimum watermark for all
     attached buffers rather than just the 'primary' one.
   - iio_buffer_init - only set the watermark default if one hasn't already
     been provided.  This allows simple support for devices with a fixed
     watermark.
   - read only attribute for watermark on fixed watermark devices.
   - add explicit buffer enable/disable callbacks to allow the buffer to
     do more than trivial actions when it is being turned on and off.
* IIO_VAL_INT support in write_raw_get_fmt function.

New device support
* Freescale MMA7455/7456L accelerometers
* Memsic MXC6255XC accelerometer
* ST lis2dh12 accelerometer
* TI ADS8688 ADC
* TI Palamas (twl6035/7) gpadc

New driver features
* mma8452
  - support either of the available interrupt pins to cope with the case
    where board layout has lead to a particular one being connected.

Staging graduation
* Dummy driver
  - this driver acts as both an example and a test device for those with
    out hardware to develop userspace code against.

Cleanups and minor bits and bobs.
* treewide
  - Sort out the ordering of iio_device_register/unregister vs runtime
    pm function calls so that it's all nice and consistent and not race
    prone.
  - Check sscanf return values.  None of the cases will actually happen as
    the strings are supplied internally, but best to be consistent on this.
* ad7780
  - switch over to the gpio descriptor interface and remove the now unused
    platform data which gets rid of a header entirely.
* ad7793
  - drop a pointless else statement.
* at91_adc
  - Swap kmalloc_array in for a kmalloc doing the same job.
* dummy
  - get rid of some commented out lines that snuck in during the move of
    the driver.
* lm3533-als
  - Print an error message on provision of an invalid resistance.
* mcp320x
  - Add compatible strings with vendor prefix and deprecate those with
    no vendor prefix.
* mxs-lradc
  - Use BIT macro in various places rather than shifted ones.
* pa12203001
  - Power off the chip if the registration fails.
* pulsedlight-lidar-lite
  - add runtime PM support.
* xilinx XADC
  - constify an iio_buffer_setup_ops structure.
2015-12-01 09:13:29 -08:00
Benjamin Romer
f84a187019 staging: unisys: better config switch comments
We should provide more information in the Kconfig help for visorbus and
visorinput.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-25 08:42:14 -08:00
Anjali Menon
24069d287c staging: unisys: visornic: Removed the blank line
Removed the blank line before the close brace to remove the check
detected by the checkpatch.pl

CHECK: Blank lines aren't necessary before a close brace '}'

Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-25 08:42:14 -08:00
Shraddha Barke
f2fd578f16 Staging: lustre: obd_cksum.h: Remove unused cksum_types_supported_server
cksum_types_supported_server is defined in header file but not used
anywhere. Hence remove it.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-25 08:39:07 -08:00
Egor Uleyskiy
6e23ec4a11 drivers: staging: vme: Deleted casting to (void *)
Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 15:30:50 -08:00
Egor Uleyskiy
59a04f1135 drivers: staging: vme: Fixed checking NULL and 0 code style
Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 15:30:50 -08:00
Egor Uleyskiy
48a42206dd drivers: staging: vme: Deleted extra bracking
* Deleted extra bracking of VME_* constants
* Deleted extra bracking of address operator

Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 15:30:50 -08:00
Egor Uleyskiy
93a28666a9 drivers: staging: vme: Fixed the using of sizeof
Constructions that looks like
    card = kzalloc(sizeof(struct pio2_card), GFP_KERNEL);
  are changed to
    card = kzalloc(sizeof(*card), GFP_KERNEL);

Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 15:30:50 -08:00
Egor Uleyskiy
cad5636db7 drivers: staging: vme: Deleted extra empty lines
Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 15:30:50 -08:00
Egor Uleyskiy
24e394b08e drivers: staging: vme: Fixed indention
Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 15:30:50 -08:00
Greg Kroah-Hartman
7f60809750 Merge 4.4-rc2 into staging-next
We want those fixes in here to resolve merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-23 14:51:50 -08:00
Linus Torvalds
dcfeda9d5f TTY/Serial fixes for 4.4-rc2
Here are a few small tty/serial driver fixes for 4.4-rc2 that resolve
 some reported problems.
 
 All have been in linux-next, full details are in the shortlog below.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlZSCjgACgkQMUfUDdst+yl4kQCgyYYsaVVUcG2i3HQUpio4CAJg
 EFQAn03Z0OD/EGNHKw7FtsICSgAhSatG
 =JRcn
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are a few small tty/serial driver fixes for 4.4-rc2 that resolve
  some reported problems.

  All have been in linux-next, full details are in the shortlog below"

* tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: export fsl8250_handle_irq
  serial: 8250_mid: Add missing dependency
  tty: audit: Fix audit source
  serial: etraxfs-uart: Fix crash
  serial: fsl_lpuart: Fix earlycon support
  bcm63xx_uart: Use the device name when registering an interrupt
  tty: Fix direct use of tty buffer work
  tty: Fix tty_send_xchar() lock order inversion
2015-11-22 15:10:57 -08:00
Linus Torvalds
7f21739301 Staging/IIO fixes for 4.4-rc2
Here are some staging and iio driver fixes for 4.4-rc2.  All of these
 are in response to issues that have been reported and have been in
 linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlZSCfgACgkQMUfUDdst+yn0cwCeI7I/i1MUaiequc4gSOoElqfa
 RCYAnj+PTk+BcbACs0mgZKbYuEEd1eVT
 =nUNA
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and iio driver fixes for 4.4-rc2.  All of these
  are in response to issues that have been reported and have been in
  linux-next for a while"

* tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions"
  iio: adc: xilinx: Fix VREFN scale
  iio: si7020: Swap data byte order
  iio: adc: vf610_adc: Fix division by zero error
  iio:ad7793: Fix ad7785 product ID
  iio: ad5064: Fix ad5629/ad5669 shift
  iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
  iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
  staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
  vf610_adc: Fix internal temperature calculation
2015-11-22 13:26:24 -08:00
Linus Torvalds
6d2d91b3e4 USB fixes for 4.4-rc2
Here are a number of USB fixes and new device ids for 4.4-rc2.  All have
 been in linux-next and the details are in the shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlZSDW4ACgkQMUfUDdst+ymrlwCgha5PobWYrhVnhC/w5ODZxRaF
 oAQAn2tOK94L9sADvjbQlFUy+/Zaxxbj
 =x9f4
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes and new device ids for 4.4-rc2.  All
  have been in linux-next and the details are in the shortlog"

* tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  usblp: do not set TASK_INTERRUPTIBLE before lock
  USB: MAINTAINERS: cxacru
  usb: kconfig: fix warning of select USB_OTG
  USB: option: add XS Stick W100-2 from 4G Systems
  xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devices
  usb: xhci: fix checking ep busy for CFC
  xhci: Workaround to get Intel xHCI reset working more reliably
  usb: chipidea: imx: fix a possible NULL dereference
  usb: chipidea: usbmisc_imx: fix a possible NULL dereference
  usb: chipidea: otg: gadget module load and unload support
  usb: chipidea: debug: disable usb irq while role switch
  ARM: dts: imx27.dtsi: change the clock information for usb
  usb: chipidea: imx: refine clock operations to adapt for all platforms
  usb: gadget: atmel_usba_udc: Expose correct device speed
  usb: musb: enable usb_dma parameter
  usb: phy: phy-mxs-usb: fix a possible NULL dereference
  usb: dwc3: gadget: let us set lower max_speed
  usb: musb: fix tx fifo flush handling
  usb: gadget: f_loopback: fix the warning during the enumeration
  usb: dwc2: host: Fix remote wakeup when not in DWC2_L2
  ...
2015-11-22 13:15:05 -08:00
Matt Ranostay
4ac4e086fd iio: pulsedlight-lidar-lite: add runtime PM
Add runtime PM support for the lidar-lite module to enable low power
mode when last device requested reading is over a second.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-22 12:18:47 +00:00
Nizam Haider
3fba9b5ff8 IIO: adc: at91_adc.c Prefer kmalloc_array over kmalloc with multiply
So this patch swaps that use out for kmalloc_array instead.

Signed-off-by Nizam Haider <nijamh@cdac.in>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-22 12:06:19 +00:00
Jonathan Cameron
438f13a283 staging:iio: Delete some commented out lines in Kconfig and Makefile.
These should have been removed with the driver move out of staging
but instead were commented out.  This was missed in reviews at the
time so fixing it up now.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-21 20:14:57 +00:00
Linus Torvalds
3ad5d7e06a Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "A bunch of fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  slub: mark the dangling ifdef #else of CONFIG_SLUB_DEBUG
  slub: avoid irqoff/on in bulk allocation
  slub: create new ___slab_alloc function that can be called with irqs disabled
  mm: fix up sparse warning in gfpflags_allow_blocking
  ocfs2: fix umask ignored issue
  PM/OPP: add entry in MAINTAINERS
  kernel/panic.c: turn off locks debug before releasing console lock
  kernel/signal.c: unexport sigsuspend()
  kasan: fix kmemleak false-positive in kasan_module_alloc()
  fat: fix fake_offset handling on error path
  mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes
  mm/page-writeback.c: initialize m_dirty to avoid compile warning
  various: fix pci_set_dma_mask return value checking
  mm: loosen MADV_NOHUGEPAGE to enable Qemu postcopy on s390
  mm: vmalloc: don't remove inexistent guard hole in remove_vm_area()
  tools/vm/page-types.c: support KPF_IDLE
  ncpfs: don't allow negative timeouts
  configfs: allow dynamic group creation
  MAINTAINERS: add Moritz as reviewer for FPGA Manager Framework
  slab.h: sprinkle __assume_aligned attributes
2015-11-21 10:49:13 -08:00
Linus Torvalds
707b4f493e Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "Two timer fixlets from Arnd:

   - Use proper constant size in the FSL timer driver
   - Prevent a build error for legacy platforms"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Disallow drivers for ARCH_USES_GETTIMEOFFSET
  clocksource/fsl: Avoid harmless 64-bit warnings
2015-11-21 10:26:24 -08:00
Linus Torvalds
4143fc83bb Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "Three fixes for the ARM GIC interrupt controller from Marc addressing
  various shortcomings versus boot initialization and suspend/resume"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Add save/restore of the active state
  irqchip/gic: Clear enable bits before restoring them
  irqchip/gic: Make sure all interrupts are deactivated at boot
2015-11-21 10:19:15 -08:00
Dragos Bogdan
8ffedc1b12 staging:iio:ad7780: Remove the ad7780_platform_data
The ad7780_platform_data contains just the reference voltage information.
Since the preferred way of specifying this information is using the Linux
regulator framework and the ad7780 platform_data is not used by other
users, it can be completely removed.

Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-21 17:52:42 +00:00
Linus Torvalds
876454ac1a MTD fixes for 4.4-rc2:
* MAINTAINERS updates for brcmnand driver
 
  * Fix reboot hangs seen when multiple NAND flash chips are registered with the
    same controller
 
  * Fix build issues on jz4740 NAND driver; the error was introduced in 4.3, so
    I guess nobody really cared, but we might as well fix it
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJWT924AAoJEFySrpd9RFgtUY4P/ievTYne0B05nGHgqtASijFg
 op88cIFuQS5SxGDmp+L2Np3VfrZOagYeLoeU2V02qkNV1Bd9fW+QeQqt4pcgKTBT
 1w2rqvU24xfa9NV91x2LFZukhkdADgEos7TX920dNIiWSnH6el7yLQ9ZWridId4J
 +K+tuH75Hc0GEFF0iXekZ6dqlJIQmLiRqqN41C0ivMWj4cpFVxvU01f0s/dO36Ie
 iLO4OKiY0tJLtsiwRUKzzxZbctv7OlM0Cbl6jgL8RaF7YneL2KzZej+/WLP6HFqJ
 GYRc7KETBllIzBKF1iBke4wl3ZJtMjCln1RpnmKRSuo4bW5XLFZBZsI66S+9WvzY
 lZ/M++4t/aC8d3lPJ/dH87Yc5pRP68Qy0Jjm6onwRbAaIoVLPyLzTNZ8b6mGFk53
 Wx74Uc23r7K7aOMGUp2WV2Tw3Idtazpm6TTUA4vg3daz7sSkqrws8+1rUOla/P2p
 NnG8gV5mAGXCeohrB48KHcVjec5iTkmuifY3xIuTmqdL7f8c1mbVysitzx0I2qtP
 sO3gKrE5qxhz8SZJnf5qp/9zN5VgciqqUav8ofx4zH5by+XYN09UnUSJwNLTGjsT
 XByCdsP1hmpuUnA1NPX0lzz+i6RAmFjY0Ll9QKluGCJVAo8CHFHo/fwvR3ssUwJn
 4q4Qm7Y+0atE7XW3E9MO
 =8XN+
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20151120' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:

 - MAINTAINERS updates for brcmnand driver

 - Fix reboot hangs seen when multiple NAND flash chips are registered
   with the same controller

 - Fix build issues on jz4740 NAND driver; the error was introduced in
   4.3, so I guess nobody really cared, but we might as well fix it

* tag 'for-linus-20151120' of git://git.infradead.org/linux-mtd:
  MAINTAINERS: brcmnand: Add co-maintainer for Broadcom SoCs
  MAINTAINERS: brcmnand: Add Broadcom internal mailing-list
  mtd: nand: fix shutdown/reboot for multi-chip systems
  mtd: jz4740_nand: fix build on jz4740 after removing gpio.h
2015-11-21 09:52:07 -08:00
Arnd Bergmann
bd63acf9e9 serial: export fsl8250_handle_irq
fsl8250_handle_irq is now used by the of_serial driver, and that fails
if it is a loadable module:

ERROR: "fsl8250_handle_irq" [drivers/tty/serial/of_serial.ko] undefined!

This exports the symbol to avoid randconfig errors.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d43b54d269 ("serial: Enable Freescale 16550 workaround on arm")
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20 16:19:54 -08:00
Heikki Krogerus
fa70045e9d serial: 8250_mid: Add missing dependency
8250_mid uses rational_best_approximation() function, so the
driver needs to select CONFIG_RATIONAL option.

This fixes build error when CONFIG_RATIONAL is not enabled:

drivers/built-in.o: In function `mid8250_set_termios':
8250_mid.c:(.text+0x10169a): undefined reference to `rational_best_approximation'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20 16:19:54 -08:00