Commit graph

310,437 commits

Author SHA1 Message Date
Moger, Babu
4335d092a1 [SCSI] scsi_dh_alua: Inroduce the set_params interface scsi_dh_alua handler
Handler expects only one parameter to set the flag ALUA_OPTIMIZE_STPG.
This flag is used to optimize the STPG behaviour. There is no change in
behaviour by default.

For example, to set the flag pass the following parameters from multipath.conf
hardware_handler        "2 alua 1"

Signed-off-by: Babu Moger <babu.moger@netapp.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:28:07 +01:00
Roland Dreier
8643b32f27 [SCSI] be2iscsi: Remove unused OFFSET_IN_PAGE() macro
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:28:02 +01:00
nagalakshmi.nandigama@lsi.com
be4a07a0e7 [SCSI] mpt2sas: Bump driver vesion to 13.100.00.00
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:56 +01:00
nagalakshmi.nandigama@lsi.com
e42fafc25f [SCSI] mpt2sas: Fix for panic happening because of improper memory allocation
The ioc->pfacts member in the IOC structure is getting set to zero
following a call to _base_get_ioc_facts due to the memset in that routine.
So if the ioc->pfacts was read after a host reset, there would be a NULL
pointer dereference. The routine _base_get_ioc_facts is called from context
of host reset.  The problem in _base_get_ioc_facts  is the size of
Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60,
so there is a four byte overflow resulting from the memset.

Also, there is memset in _base_get_port_facts using the incorrect structure,
it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
CC: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:50 +01:00
nagalakshmi.nandigama@lsi.com
39af7a9894 [SCSI] mpt2sas: Fix for hard drive going OFFLINE when hard reset issued and simultaneously another hard drive is hot unplugged
Following the host reset, the firmware discovery is reassigning another hard
drive in the topology to the same device handle as that device is getting hot
removed. Until the driver device removal routine is called, there will be two
hard drive with the matching device handle in the internal device link
list. In the device removal routine, a separate function which moves the
device from BLOCKED into OFFLINE state.  Since this routine is passed with the
device handle passed as input parameter, the routine will be traversing the
internal device link list searching for matching device handle. This results
in two devices with matching device handle, therefore both devices goes
OFFLINE.

To fix this issue,the input parameter is changed from device handle to SAS
address, therefore only the device that is hot unplugged will be placed in
OFFLINE state.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:44 +01:00
nagalakshmi.nandigama@lsi.com
64bb81383a [SCSI] mpt2sas: Set the phy identifier of the end device to the phy number of the parent device it is linked to
The phy_identifier inside the routine _transport_set_identify()
is set to sas_device_page_zero->PhyNum. This returns the
phy number of the parent device this device is linked to.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:38 +01:00
nagalakshmi.nandigama@lsi.com
43d6ddfa7a [SCSI] mpt2sas : While enabling phy, read the current port number from sas iounit page 0 instead of page 1
The port number is changing after disabling/enabling phys using the SysFS
interface This is because the firmware behavour changed where it would read
the the port number then set it to some different value even though Auto Port
Config is turned on.  With this change of behavour in FW, it is possible that
the expanders are moved from one port to another after disabling /enabling
phys. This is occuring because the port number in sas iounit page 1 is not
matching up to the current port in page 0. In order to fix this the driver is
modified to read the current port number from sas iounit page 0 instead of
page 1.  Also copy the port and phy flags over from page 0 to page 1.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:33 +01:00
nagalakshmi.nandigama@lsi.com
d838c36cb7 [SCSI] mpt2sas: Fix linux driver sparse errors
Fix several endian issues found by runing sparse.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:27 +01:00
nagalakshmi.nandigama@lsi.com
298c794def [SCSI] mpt2sas: Fix security scan issues reported by source code analysis tool
Modified the source code as per the findings reported by the source
code analysis tool. Source code for the following functionalities
has been touched. None of the driver functionalities has changed.

- SMP Passthrough IOCTL
- Debug messages for MPT Replies (i.e. bit 9 of Logging Level)
- Task Management using sysfs
- Device removal, i.e. when a target device (including any PD within a volume)
  is removed, and Volume Deletion.
- Trace Buffer

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:21 +01:00
nagalakshmi.nandigama@lsi.com
09da0b32d0 [SCSI] mpt2sas: Improvement were made to better protect the sas_device, raid_device, and expander_device lists
There were possible race conditions surrounding reading an object
from the link list while from another context in the driver was
removing it. The nature of this enhancement is to rearrange locking
so the link lists are better protected.

Change set:
(1) numerous routines were rearranged so spin locks are held through
the entire time a link list object is being read from or written to.
(2) added new routines for object deletion from link list.  Thus ensuring
lock was held during the deletion of the link list object, then and memory
for object freed outside the lock. The memory was freed outside the lock
so driver had access to device object info which was required for
notifying the scsi mid layer that a device was getting deleted.
(3) added the ioc->blocking_handles parameter.  This is a bitmask used
to identify which devices need blocking when there is device loss.  This was
introduced so that lock can be held for the entire time traversing the link
list objects, and the bitmask was set to indicate which device handles need
blocking. Oustide the lock the ioc->blocking_handles bitmask is traversed,
with the respective device handle the scsi mid layer is called for moving
devices into blocking state.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:15 +01:00
nagalakshmi.nandigama@lsi.com
acafc892b0 [SCSI] mpt2sas : Perform Target Reset instead of HBA reset when a SATA_PASSTHROUGH cmd timeout happens
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:08 +01:00
nagalakshmi.nandigama@lsi.com
77a6edffdf [SCSI] mpt2sas: Added multisegment mode support for Linux BSG Driver
Added support for Block IO requests with multiple segments (vectors) in
the SMP handler of the SAS Transport Class. This is required by the
BSG driver. Multisegment support added for both, Request and Response.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:27:02 +01:00
nagalakshmi.nandigama@lsi.com
913809f6e7 [SCSI] mpt2sas: Removed redundant global mutex for IOCTLs
When the lock_kernel and unlock_kernel routines were removed in the
2.6.39 kernel, a global mutex was added on top of the existing mutex
which already existed. With this implementation, only one IOCTL
will be active at any time no matter how many ever controllers
are present. This causes poor performance.

Removed the global mutex so that the driver can work with the existing
semaphore that was already part of the existing code.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:26:56 +01:00
nagalakshmi.nandigama@lsi.com
609dc44b9a [SCSI] mpt2sas: MPI next revision header update
Changeset in MPI headers:
1) Bumped MPI2_HEADER_VERSION_UNIT
2) Added 4K sectors supported bit to CapabilitiesFlags field of IOC Page 6.
3) Added UEFIVersion field to BIOS Page 1 and defined additional
    BiosOptions bits to control UEFI behavior.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:26:49 +01:00
adam radford
e38a813ba9 [SCSI] megaraid_sas: Version and Changelog update
The following patch for megaraid_sas updates the driver version to
v00.00.06.15-rc1, and updates Documentation/scsi/ChangeLog.megaraid_sas.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:26:41 +01:00
adam radford
c1529fa25e [SCSI] megaraid_sas: Add fpRead/WriteCapable, fpRead/WriteAcrossStripe checks
The following patch for megaraid_sas fixes the fastpath code decision
logic to use fpRead/WriteCapable, fpRead/WriteAcrossStripe flags
instead of the old logic.  This fixes a bug where fastpath writes
could be sent to a read only LD.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:26:18 +01:00
adam radford
5738f99643 [SCSI] megaraid_sas: Optimize HostMSIxVectors setting
The following patch for megaraid_sas removes an incorrect comment and
optimizes the setting of HostMSIxVectors.  This was found during a
code review by Tomas Henzl @ RedHat.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:26:10 +01:00
Santosh Nayak
fd00f7c103 [SCSI] pm8001: fix endian issue with code optimization.
Data type of the 'tag' field of 'fw_flash_Update_resp' should be __le32.

Data type of 'pHeader' should be __le32.  Remove 2nd cast to 'piomb'.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 19:25:50 +01:00
Stephen Boyd
0976dfc1d0 workqueue: Catch more locking problems with flush_work()
If a workqueue is flushed with flush_work() lockdep checking can
be circumvented. For example:

 static DEFINE_MUTEX(mutex);

 static void my_work(struct work_struct *w)
 {
         mutex_lock(&mutex);
         mutex_unlock(&mutex);
 }

 static DECLARE_WORK(work, my_work);

 static int __init start_test_module(void)
 {
         schedule_work(&work);
         return 0;
 }
 module_init(start_test_module);

 static void __exit stop_test_module(void)
 {
         mutex_lock(&mutex);
         flush_work(&work);
         mutex_unlock(&mutex);
 }
 module_exit(stop_test_module);

would not always print a warning when flush_work() was called.
In this trivial example nothing could go wrong since we are
guaranteed module_init() and module_exit() don't run concurrently,
but if the work item is schedule asynchronously we could have a
scenario where the work item is running just at the time flush_work()
is called resulting in a classic ABBA locking problem.

Add a lockdep hint by acquiring and releasing the work item
lockdep_map in flush_work() so that we always catch this
potential deadlock scenario.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-23 11:06:42 -07:00
Mike Galbraith
c4c27fbdda cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads
Allowing kthreadd to be moved to a non-root group makes no sense, it being
a global resource, and needlessly leads unsuspecting users toward trouble.

1. An RT workqueue worker thread spawned in a task group with no rt_runtime
allocated is not schedulable.  Simple user error, but harmful to the box.

2. A worker thread which acquires PF_THREAD_BOUND can never leave a cpuset,
rendering the cpuset immortal.

Save the user some unexpected trouble, just say no.

Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-23 11:03:51 -07:00
Jesper Juhl
c1a4ecd921 ASoC: wm8994: Delete trailing whitespace from sound/soc/codecs/wm8994.c
While reading through sound/soc/codecs/wm8994.c I noticed a fair
amount of trailing whitespace. This patch gets rid of it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23 19:02:20 +01:00
Richard Kuo
e00574b7f3 hexagon: add missing cpu.h include
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2012-04-23 12:57:24 -05:00
Srivatsa S. Bhat
57f27cca7a hexagon/CPU hotplug: Add missing call to notify_cpu_starting()
The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2012-04-23 12:57:11 -05:00
Richard Kuo
e8e42a5cff hexagon: use renamed tick_nohz_idle_* functions
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2012-04-23 12:56:57 -05:00
Richard Kuo
6bbbc30ce6 Hexagon: misc compile warning/error cleanup due to missing headers
Fixed warnings/errors for EXPORT_SYMBOL, linux_binprm, elf related
defines

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2012-04-23 12:56:41 -05:00
Mark Brown
fbe5c580a6 ASoC: Update regmap access for WM5100 DSP control registers
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23 18:52:31 +01:00
Daniel Vetter
9923777dff mm: fixup compilation error due to an asm write through a const pointer
This regression has been introduced in

commit f56f821feb
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Mar 25 19:47:41 2012 +0200

    mm: extend prefault helpers to fault in more than PAGE_SIZE

I have failed to notice this because x86 asm seems to happily compile
things as-is.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-23 17:41:18 +01:00
Takashi Iwai
8353e6c632 drm/edid: Add packed attribute to new gtf2 and cvt structs
The new structs added in struct detailed_data_monitor_range must be
marked with packed attribute although the outer struct itself is
already marked as packed.  Otherwise these 7-bytes structs may be
aligned, and give the wrong position and size for the data.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-23 17:41:17 +01:00
Takashi Iwai
c09dedb7a5 drm/edid: Add a workaround for 1366x768 HD panel
HD panel (1366x768) found most commonly on laptops can't be represented
exactly in CVT/DMT expression, which leads to 1368x768 instead, because
1366 can't be divided by 8.

Add a hack to convert to 1366x768 manually as an exception.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-23 17:41:16 +01:00
Takashi Iwai
cff7873554 ASoC: updates for 3.4
Slightly larger than normal - the DAPM fix is a "this should always have
 worked" type of thing which is very clear and should have no impact on
 systems that don't need it.  The WM8994 fix is driver specific but
 pretty important for that driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPlURUAAoJEBus8iNuMP3dVL4P/1ynNUPmdBhiDeVT6BrJxeyL
 dKGBaqYxv8Sfzu8O+TIaqCyls+qp3++vQO26YgeuZNBnE+OtRaJbbpatIBe7Gmyr
 7glYowUih+B/lfLbwlPCKCAs2ahk6oUbY3bFVqgOgzX9Zt4M73MEs7oVTPD2TvtQ
 ZkudzzopzvEquh1NT/+wLmdJwSgOGfa2fLyt/+OaD6LCxDaZ3RPsO/wFoEqnSjKp
 rdqHeOKAg/vFDSfFMwhnqZ5hGUUTqg8HlZ3urYvGrkKsyNUgPkIeNQKy4e0FxeSP
 Lqj/EbKvH0gKWNdQkG6AWQpdN5bpqtWZb0h5BIsZhWqmjy7dEOopjnh/Hrmj+nFQ
 ac8SGqq2/2HhbE/irN3y4Z3wOJJq9BEiFdUqIntOq95eT3S1Ib00osLR0SMHLwqe
 Sk8UfVAspt9tdzqbzy67enAEjDsNo3OalV7qXIjYzL+csCDs7yPEM+JFxKx45ubW
 tz3Wr3zjSlShYIeIYxGF8VuiH0QBhcXFMME/hv/QLAmfT6KvB6JlKlyWvHqJhQYE
 mKQLz7AvARBfoaPhwn2+wcXO157FTC22Xt6pKo9TLwCotHNP2YO6lLVPE10GF7rf
 aecCJe3QAGAWf3TwAiqcv8vOaR6TaO2f3hSAAPkqEWh6uBVC6wib5fJZzuzOafr2
 Grt/dZcdfaiN4Rdpok7F
 =oz/g
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: updates for 3.4

Slightly larger than normal - the DAPM fix is a "this should always have
worked" type of thing which is very clear and should have no impact on
systems that don't need it.  The WM8994 fix is driver specific but
pretty important for that driver.
2012-04-23 18:39:47 +02:00
Greg Kroah-Hartman
10af77c193 Merge 3.4-rc4 into tty-next
This resolves the merge problem with:
	drivers/tty/serial/pch_uart.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 09:39:23 -07:00
David Teigland
53ad1c980d dlm: fix QUECVT when convert queue is empty
The QUECVT flag should not prevent conversions from
being granted immediately when the convert queue is
empty.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-23 11:30:59 -05:00
Paul Gortmaker
9f3045eca8 irq: hide debug macros so they don't collide with others.
The file kernel/irq/debug.h temporarily defines P, PS, PD
and then undefines them.  However these names aren't really
"internal" enough, and collide with other more legit users
such as the ones in the xtensa arch, causing:

In file included from kernel/irq/internals.h:58:0,
                 from kernel/irq/irqdesc.c:18:
kernel/irq/debug.h:8:0: warning: "PS" redefined [enabled by default]
arch/xtensa/include/asm/regs.h:59:0: note: this is the location of the previous definition

Add a handful of underscores to do a better job of hiding these
temporary macros.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-23 12:30:03 -04:00
Paul Gortmaker
bfae8ee8d2 xtensa: fix build error in xtensa/include/asm/io.h
Caused by commit 6c03438ede

    kernel.h: doesn't explicitly use bug.h, so don't include it.

This header uses bug.h so explicitly include it now that the
implicit presence was removed by 6c03438ed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-23 12:30:03 -04:00
Paul Gortmaker
9112a6b2fa xtensa: fix build failure in xtensa/kernel/signal.c
Caused by commit 3785006ac3

    "xtensa: don't mask signals if we fail to setup signal stack"

It assigns a return value to "ret", but there is no such variable
anywhere in scope.  Create one.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-23 12:24:55 -04:00
Alexey Kaminsky
0a97e1e9f9 HID: apple: Add Apple wireless keyboard 2011 ANSI PID
Signed-off-by: Alexey Kaminsky <me@akaminsky.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23 18:02:18 +02:00
Russell King
354535845f ARM: OMAP: fix DMA vs memory ordering
Using coherent DMA memory with the OMAP DMA engine results in
unpredictable behaviour due to memory ordering issues; as things stand,
there is no guarantee that data written to coherent DMA memory will be
visible to the DMA hardware.

This is because the OMAP dma_write() accessor contains no barriers,
necessary on ARMv6 and above.  The effect of this can be seen in comments
in the OMAP serial driver, which incorrectly talks about cache flushing
for the coherent DMA stuff.

Rather than adding barriers to the accessors, add it in the DMA support
code just before we enable DMA, and just after we disable DMA.  This
avoids having barriers for every DMA register access.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 16:54:21 +01:00
Linus Walleij
754aba436b ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs
The MMCI driver will not work without two IRQs since this is not
flagged as a single-irq variant. Looking through the complex IRQ
definition for the MMCI on the versatile (including an #if 1
statement forcing MMCI IRQ0 to the VIC) this appears to the the
correct IRQ number for both models.

Cc: Niklas Hernaeus <niklas.hernaeus@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 15:46:15 +01:00
Will Deacon
ff9a184cfb ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler
The ARM PCS mandates that the length and stride bits of the fpscr are
cleared on entry to and return from a public interface. Although signal
handlers run asynchronously with respect to the interrupted function,
the handler itself expects to run as though it has been called like a
normal function.

This patch updates the state mirroring the VFP hardware before entry to
a signal handler so that it adheres to the PCS. Furthermore, we disable
VFP to ensure that we trap on any floating point operation performed by
the signal handler and synchronise the hardware appropriately. A check
is inserted after the signal handler to avoid redundant flushing if VFP
was not used.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 15:44:42 +01:00
Will Deacon
2498814fcb ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c
The user VFP state must be preserved (subject to ucontext modifications)
across invocation of a signal handler and this is currently handled by
vfp_{preserve,restore}_context in signal.c

Since this code requires intimate low-level knowledge of the VFP state,
this patch moves it into vfpmodule.c.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 15:44:41 +01:00
Will Deacon
ab4d536890 ARM: 7398/1: l2x0: only write to debug registers on PL310
PL310 errata #588369 and #727915 require writes to the debug registers
of the cache controller to work around known problems. Writing these
registers on L220 may cause deadlock, so ensure that we only perform
this operation when we identify a PL310 at probe time.

Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 14:21:52 +01:00
Will Deacon
f154fe9b80 ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310
The workaround for PL310 erratum #753970 can lead to deadlock on systems
with an L220 cache controller.

This patch makes the workaround effective only when the cache controller
is identified as a PL310 at probe time.

Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 14:21:52 +01:00
Will Deacon
f0c4b8d653 ARM: 7396/1: errata: only handle ARM erratum #326103 on affected cores
Erratum #326103 ("FSR write bit incorrect on a SWP to read-only memory")
only affects the ARM 1136 core prior to r1p0. The workaround
disassembles the faulting instruction to determine whether it was a read
or write access on all v6 cores.

An issue has been reported on the ARM 11MPCore whereby loading the
faulting instruction may happen in parallel with that page being
unmapped, resulting in a deadlock due to the lack of TLB broadcasting
in hardware:

http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091561.html

This patch limits the workaround so that it is only used on affected
cores, which are known to be UP only. Other v6 cores can rely on the
FSR to indicate the access type correctly.

Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-23 14:21:52 +01:00
Linus Walleij
d29bf01941 dma/amba-pl08x: check for terminal count status only
For some reason I can't figure out we're reading the PL080_INT_STATUS
register instead of PL080_TC_STATUS when checking for the terminal
count. The PL080_INT_STATUS is a logical OR between the error and
terminal count status register and may not report what we want it
to, especially if there is an error and a terminal count at the same
time and the former is not lowered in time for the check in the TC
register. Make sure we read what we're actually interested in.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 18:23:55 +05:30
Lee Jones
3f3ed40060 ARM: ux500: Rename gpio_keys in the Device Tree file
Ensure each button is individually identifiable by using
their correct unique given device names.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-23 14:52:34 +02:00
Lee Jones
b55ac4ea96 drivers/gpio: gpio-nomadik: Provide documentation for Device Tree bindings
Add required documentation for specific gpio-nomadik DT bindings.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-23 14:52:30 +02:00
Lee Jones
c0b133bda1 drivers/gpio: gpio-nomadik: Device Tree bindings
This creates Device Tree bindings for the Nomadik GPIO driver.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Split off from the patch actually implementing the bindings]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-23 14:51:57 +02:00
Linus Walleij
7e426da823 dma/ste_dma40: fix erroneous comparison
A small fallout from Vinod's conversions to dma_transfer_direction,
this small comparison was done with a dma_data_direction instead.
Fix it by comparing against the correct enum.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 18:07:05 +05:30
Linus Walleij
15e4b78d73 dma/ste_dma40: explicitly include regulator consumer header
The patch "ARM: amba: Remove AMBA level regulator support" breaks
the DMA40 driver since the <linux/amba/bus.h> header implicitly
included the regulator consumer header. So include it explicitly
and fix the build error.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23 18:07:05 +05:30
Lee Jones
2cfaa62de5 ARM: ux500: Enable the external bus with Device Tree
To allow for proper initialisation of the SMSC9115 Ethernet chip
and other devices which may be connected to the 'external bus',
Device Tree must first enable and traverse though it. This patch
enables the 'external bus' which will facilitate further
initialisation of its suborantate DT nodes.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-23 14:36:21 +02:00