Commit graph

310,437 commits

Author SHA1 Message Date
Keshava Munegowda
1fcb57d0f6 ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
It is observed that the echi ports of 3430 sdp board
are not working due to the random timing of programming
the associated GPIOs of the ULPI PHYs of the EHCI for reset.
If the PHYs are reset at during usbhs core driver, host ports will
not work because EHCI driver is loaded after the resetting PHYs.
The PHYs should be in reset state while initializing the EHCI
controller.
The code which does the GPIO pins associated with the PHYs
are programmed to reset is moved from the USB host core driver
to EHCI driver.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 18:47:00 +02:00
Chris Wilson
8aaa81a166 drm/i915/sprite: Always enable the scaler on IronLake
As I do not see the output update without the scaler enabled on my
i3-330m, always enable it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-16 18:45:49 +02:00
Chris Wilson
f681fa235f drm/i915: Export the generic, not arch specific, intel_update_watermarks()
Rather than export every single architecture specific update_wm, just
export the wrapper around the display vtable.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-16 18:44:47 +02:00
Theodore Ts'o
9cd70b347e ext4: address scalability issue by removing extent cache statistics
Andi Kleen and Tim Chen have reported that under certain circumstances
the extent cache statistics are causing scalability problems due to
cache line bounces.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-04-16 12:16:20 -04:00
Greg Kroah-Hartman
edffaa031e usb: fixes for v3.4-rc cycle
Here are the fixes I have queued for v3.4-rc cycle so far.
 
 It includes fixes on many of the gadget drivers and a few
 of the UDC controller drivers.
 
 For musb we have a fix for a kernel oops when unloading
 omap2430.ko glue layer, proper error checking for pm_runtime_*,
 fix for the ULPI transfer block, and a bug fix in musb_cleanup_urb
 routine.
 
 For s3c-hsotg we have mostly FIFO-related fixes (proper TX FIFO
 allocation, TX FIFO corruption fix in DMA mode) but also a couple
 of minor fixes (fixing maximum packet size for ep0 and fix for
 big transfers with DMA).
 
 For the dwc3 driver we have a memory leak fix, a very important
 fix for USB30CV with SetFeature tests and the hability to handle
 ep0 requests bigger than wMaxPacketSize.
 
 On top of that there's a bunch of gadget driver minor fixes adding
 proper section annotations, and fixing up the sysfs interface for
 doing device-initiated connect/disconnect and so on.
 
 All patches have been pending on the mailing list for quite a while
 and look good for your for-linus branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPhUWkAAoJEIaOsuA1yqRE8h0P/R5jNluFEzpLA5SLgNFAn4F1
 +LkIvB9T/F+UmO5EW4cfQbJ7DgKh92KISIgwSS0+LJEsC05ODWVs1PB1KYj/IgrX
 D4GxrAz7DhwGlln2ejiSp/Mx3ATRCrUqhd7S4kt+tsCi7As9rBW4eduUTsp8ip5Z
 kxvivYqKfjjJ8MHHRwo3AkkqCZOIc+JW9lhL7itkYMlmpBLPg8NMusJ32O2+0BfD
 SK1WOWCladpVjVjoux7QM1y2kZN5XPgwRxLzB/XDK8QbkBukGORPbwiwRnnhHNf5
 W/ceKYlCJzj6WdcEUHeDA8b4Sfhu6pbBVjhD3fybMkY0IqcgR3sGDp1eKnXjAbuS
 01ALiTKiWlboMhTD4RqnBs17C70kfzRTHfPLZBHi9w04u3jbb5oCmTOgD2gNbb0m
 0iHDizMdNVxt25Tcj+mtKNhTYguJ8HoFpQ/bWEHOa/Ra723WPaTd1RFhPLOAgj1K
 0V6Rwsi/eb/7CdkCfzOlZe7zixeyLthzG5YbXRMj84XLoD9mBhpMBA21DFpcxizr
 1OpZfcgz2LH4WqGZky35Q+BKPma2DA7tLv3VwIRXVkfv9p1ISzIS+Vre/TCHDZWs
 oXpsZXHBNyCU+saomJnQ/mRJQ4+uSKsqc+WJPe6D3KpwlMi6DtK3OAAnmullMPjx
 ptHgrZzXZuS/10gc1F7g
 =Wqlb
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

usb: fixes for v3.4-rc cycle

Here are the fixes I have queued for v3.4-rc cycle so far.

It includes fixes on many of the gadget drivers and a few
of the UDC controller drivers.

For musb we have a fix for a kernel oops when unloading
omap2430.ko glue layer, proper error checking for pm_runtime_*,
fix for the ULPI transfer block, and a bug fix in musb_cleanup_urb
routine.

For s3c-hsotg we have mostly FIFO-related fixes (proper TX FIFO
allocation, TX FIFO corruption fix in DMA mode) but also a couple
of minor fixes (fixing maximum packet size for ep0 and fix for
big transfers with DMA).

For the dwc3 driver we have a memory leak fix, a very important
fix for USB30CV with SetFeature tests and the hability to handle
ep0 requests bigger than wMaxPacketSize.

On top of that there's a bunch of gadget driver minor fixes adding
proper section annotations, and fixing up the sysfs interface for
doing device-initiated connect/disconnect and so on.

All patches have been pending on the mailing list for quite a while
and look good for your for-linus branch.
2012-04-16 08:35:33 -07:00
Arnaldo Carvalho de Melo
657bcaf509 perf annotate browser: Use the disasm_line instruction name and operand fields
No need to reparse it everytime.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-90ncot487p4h5rzkn8h2whou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 12:16:39 -03:00
Arnaldo Carvalho de Melo
5145418b06 perf annotate: Parse instruction
For lines with instructions find the name and operands, breaking those
tokens for consumption by the browser.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6aazb9f5o3d9zi28e6rruv12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 12:15:07 -03:00
Arnaldo Carvalho de Melo
29ed6e76b4 perf annotate: Rename objdump_line to disasm_line
We want to move away from using 'objdump -dS' as the only disassembler
supported.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lsn9pjuxxm5ezsubyhkmprw7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 12:09:59 -03:00
Peter Ujfalusi
8eaeb93933 mfd: Convert twl6040 to i2c driver, and separate it from twl core
Complete the separation of the twl6040 from the twl core since
it is a separate chip, not part of the twl6030 PMIC.

Make the needed Kconfig changes for the depending drivers at the
same time to avoid breaking the kernel build (vibra, ASoC components).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 16:45:34 +02:00
Daniel Lezcano
4accdff7a3 mfd : Fix dbx500 compilation error
The ux500 default config enables the db5500 and the db8500.
The incoming cpuidle driver uses the 'prcmu_enable_wakeups'
and the 'prcmu_set_power_state' functions but these ones
are defined but not implemented for the db5500, leading to
an unresolved symbol error at link time. In order to compile,
we have to disable the db5500 support which is not acceptable
for the default config.

I noticed there are also some other functions which are
defined but not implemented.

This patch fix this by removing the functions definitions
and move out of the config section the empty functions which
are normally used when the DB550 config is disabled.
Only the functions which are not implemented are concerned
by this modification.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 16:42:43 +02:00
David Ahern
9e755756e4 perf report: Fix crash showing warning related to kernel maps
While testing https://lkml.org/lkml/2012/4/10/123 I hit this crash:

(gdb) bt
 0  0x000000000042000f in __cmd_report (rep=0x7fff80cec580) at builtin-report.c:380
 1  cmd_report (argc=0, argv=<optimized out>, prefix=<optimized out>) at builtin-report.c:759
 2  0x0000000000414513 in run_builtin (p=0x7724a8, argc=3, argv=0x7fff80ceca70) at perf.c:273
 3  0x0000000000413d41 in handle_internal_command (argv=0x7fff80ceca70, argc=3) at perf.c:345
 4  run_argv (argv=0x7fff80cec880, argcp=0x7fff80cec88c) at perf.c:389
 5  main (argc=3, argv=0x7fff80ceca70) at perf.c:487

kernel_map can be NULL, so need to handle it while dumping a warning
to user.

v2:
- fixed RB_EMPTY_ROOT check -- desc takes the altnerative output when RB_EMPTY_ROOT is false.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1334544855-55021-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 11:18:22 -03:00
Alex Deucher
5273db706f drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2
Forget to unreserve after pinning.  This can lead to problems in
soft reset and resume.

v2: rework patch as per Michel's suggestion.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-16 13:42:04 +01:00
Masanari Iida
6b2aac42b2 Fix typo in various Kconfig file
Correct spelling typo in various Kconfig file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:40:08 +02:00
Dave Airlie
16a5e32b83 drm/radeon: disable MSI on RV515
My rv515 card is very flaky with msi enabled. Every so often it loses a rearm
and never comes back, manually banging the rearm brings it back.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-16 13:40:04 +01:00
Jesper Juhl
b40b26ccfc gma500: Don't needlessly include version.h in mdfld_dsi_output.h
drivers/gpu/drm/gma500/mdfld_dsi_output.h does not need to
'#include <linux/version.h>' - so don't.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:38:19 +02:00
Masanari Iida
c94bed8e19 Documentation: Fix typo in multiple files in Documentation
Correct multiple spelling typo in Documentation.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Rob Landley <rob@landley.net>
Reported-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:37:13 +02:00
Santosh Y
3b729f7647 scsi: fix comment spelling fix recory->recovery
Signed-off-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:35:30 +02:00
Josh Triplett
a7e0e4e99f x86: Fix typo in MODULE_DEVICE_TABLE example: s/x86_cpu/x86cpu/
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:20:19 +02:00
Masanari Iida
b6cafa274d radeon: Fix typo in radeon_gem.c
Correct spelling "withou" to "without" in
drivers/gpu/drm/radeon/radeon_gem.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:18:08 +02:00
Thierry Reding
7cffae421e iommu: tegra/gart: Add device tree support
This commit adds device tree support for the GART hardware available on
NVIDIA Tegra 20 SoCs.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-04-16 13:57:16 +02:00
Vandana Salve
543f3f33b6 iommu: tegra/gart: use correct gart_device
Pass the correct gart device pointer.

Reviewed-by: Vandana Salve <vsalve@nvidia.com>
Tested-by: Vandana Salve <vsalve@nvidia.com>
Reviewed-by: Hiroshi Doyu <hdoyu@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-04-16 13:56:44 +02:00
Hiroshi DOYU
907309176f iommu/tegra: smmu: Print device name correctly
Print an attached device name correctly.

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-04-16 12:52:41 +02:00
Nicolas Ferre
1234f4bada hwrng: Kconfig: remove dependency for atmel-rng driver
This will allow to select this driver for newer SoCs. Make sure to
keep dependency on HAVE_CLK to avoid breaking other machines.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-16 12:47:18 +02:00
Nicolas Ferre
1fc4ec3791 Input: Kconfig: remove dependency for atmel_tsadcc driver
This will allow to select this driver for newer SoCs.
Keep dependency on AT91 because of the use of an header
file located in include/mach directory.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-16 12:47:18 +02:00
Nicolas Ferre
938f970eb2 rtc: Kconfig: remove dependency for AT91 rtc driver
This will allow to select this driver for newer SoCs.
Keep dependency on AT91 because of the use of an header
file located in include/mach directory.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:47:17 +02:00
Nicolas Ferre
ff65e398f3 ARM: at91/Kconfig: website link for AT91SAM9G20-EK
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:36:43 +02:00
Nicolas Ferre
514982adc7 ARM: at91/Kconfig: add AT91SAM9x5 family to AT91_EARLY_DBGU0 entry
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:36:43 +02:00
Nicolas Ferre
fefbc4075a ARM: at91/Kconfig: add clarifications to AT91SAM9M10G45-EK entry
Add clarifications about the SoCs that can be found on an AT91SAM9M10G45-EK
board. Add also the web link to this board on Atmel's website.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:36:42 +02:00
Nicolas Ferre
a26e1af50e ARM: at91/Kconfig: add comment to at91sam9x5 family entry
Add comment to make it clear that several SoC are supported by
this generic entry.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:36:41 +02:00
Nicolas Ferre
ca1dcbf7fc ARM: at91/Kconfig: change at91sam9g45 entry
The AT91SAM9G45 entry covers the whole family so we also add the AT91SAM9M10
name and the "families" qualifier. Then, add a comment to explain which SoCs
are supported by this entry: AT91SAM9G45, AT91SAM9G46 but also
AT91SAM9M10 and AT91SAM9M11.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:36:40 +02:00
Nicolas Ferre
929e994f7e ARM: at91: change AT91 Kconfig entry comment
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 12:36:39 +02:00
Vishal Agarwal
6ec5bcadc2 Bluetooth: Temporary keys should be retained during connection
If a key is non persistent then it should not be used in future
connections but it should be kept for current connection. And it
should be removed when connecion is removed.

Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-16 12:57:45 +03:00
Vishal Agarwal
745c0ce35f Bluetooth: hci_persistent_key should return bool
This patch changes the return type of function hci_persistent_key
from int to bool because it makes more sense to return information
whether a key is persistent or not as a bool.

Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-16 12:57:40 +03:00
Axel Lin
8ac0e95d64 regulator: core: Support setting suspend_[mode|voltage] if set_suspend_[en|dis]able is NULL
In current implementation, to support set_suspend_voltage and set_suspend_mode
the regulator code needs the regulator driver to implement both
set_suspend_enable and set_suspend_disable callbacks.

This patch removes this limitation. In the case set_suspend_enable and/or
set_suspend_disable are NULL, the regulator code assumes we don't need to
do any thing to enable/disable regulator when system is suspended and
then will continue to handle set_suspend_mode and set_suspend_voltage.

Currently the regulator core creates suspend state related sysfs entries only
if both set_suspend_enable and set_suspend_disable callbacks are not NULL.
A side-effect of this change is that the regulator core will create suspend
state related sysfs entries unconditionally now.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16 10:20:16 +01:00
Axel Lin
3f24f5ada6 regulator: core: Fix getting input_uV when supplied by another regulator
When supplied by another regulator, returns the supply regulator's output
voltage for inpu_uV.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16 10:19:30 +01:00
Jean-Christophe PLAGNIOL-VILLARD
ee9dd7631a ARM: at91: fix at91sam9261ek Ethernet dm9000 irq
You need to setup the dm9000 irq via gpio_to_irq() since
d0fbda9add (ARM: at91/gpio: drop PIN_BASE).

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org>	[3.2+]
2012-04-16 11:08:26 +02:00
Jean-Christophe PLAGNIOL-VILLARD
bf66b0d1da ARM: at91: fix rm9200ek flash size
The flash size is 8MiB.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:26 +02:00
Joachim Eastwood
926de6d8b9 ARM: at91: remove empty at91_init_serial function
The real function is long gone and the empty one will generate warnings
when configured without Atmel serial:
  arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: 'struct at91_uart_config' declared inside parameter list
  arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:25 +02:00
Nicolas Ferre
67f3af402a ARM: at91: fix typo in at91_pmc_base assembly declaration
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:25 +02:00
Joachim Eastwood
ac8c411c83 ARM: at91: Export at91_matrix_base
at91_matrix_* macro's are used by at91_udc usb gadget driver,
which can be built as module, therefore we need to export the
variable containing matrix base address.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:24 +02:00
Joachim Eastwood
f19b797c08 ARM: at91: Export at91_pmc_base
After commit b55149529d (ARM: at91/PMC: make register base soc independent)
building atmel_usba_udc as a module fails with following message
  ERROR: "at91_pmc_base" [drivers/usb/gadget/atmel_usba_udc.ko] undefined!
  make[1]: *** [__modpost] Error 1
  make: *** [modules] Error 2

Export symbol to allow driver to be built as a module again.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:24 +02:00
Joachim Eastwood
9268c6c6fa ARM: at91: Export at91_ramc_base
After commit f363c40 (ARM: at91: make sdram/ddr register base soc independent)
building at91_cf as a module fails with:
  ERROR: "at91_ramc_base" [drivers/pcmcia/at91_cf.ko] undefined!
  make[1]: *** [__modpost] Error 1
  make: *** [modules] Error 2

Export at91_ramc_base symbol to allow drivers using at91_ramc_*
functions to be built as modules again.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
[nicolas.ferre@atmel.com: modify slightly commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:24 +02:00
Joachim Eastwood
9fce85c7e4 ARM: at91: Export at91_st_base
After commit 5e9cf5e (ARM: at91: make ST (System Timer) soc independent)
building at91rm9200_wdt as a module fails with following message
  ERROR: "at91_st_base" [drivers/watchdog/at91rm9200_wdt.ko] undefined!
  make[1]: *** [__modpost] Error 1
  make: *** [modules] Error 2

Export symbol to allow wdt driver to be built as a module again.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
[nicolas.ferre@atmel.com: use EXPORT_SYMBOL_GPL()]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16 11:08:23 +02:00
Mark Brown
cd22a965c4 regulator: da9052: Directly include of.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16 09:54:24 +01:00
Hector Oron
33076883bc ARM: i.MX: efikamx: match machine descriptions with legacy
Rename machine descriptions to match legacy descriptions distributed by
  manufacturer BSP. This way distributions can do clean upgrades from
  userspace scripts which check for these values to differentiate platforms
  with single kernel binaries.

Signed-off-by: Hector Oron <hector.oron@gmail.com>
Acked-by: Matt Sealey <matt@genesi-usa.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-16 09:54:50 +02:00
Javier Martin
435ca24116 ARM i.MX: Visstrim_M10: Add board version detection.
Visstrim_M10 boards have 3 gpios to detect the
expansion board version attached and other 3 to
detect the motherboard revision.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-16 09:49:31 +02:00
Uwe Kleine-König
19a3dab697 ARM: imx_v4_v5_defconfig: enable adc and touch driver of mc13783
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-16 09:49:30 +02:00
Alex Gershgorin
c8349fb437 ARM: i.MX: i.MX35-PDK: Add regulator support
Signed-off-by: Alex Gershgorin <alexg@meprolight.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-16 09:49:07 +02:00
Daniel Vetter
f9bef081c3 drm/i915: don't clobber the special upscaling lvds timings
This regression has been introduced in

commit ca9bfa7eed
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat Jan 28 14:49:20 2012 +0100

    drm/i915: fixup interlaced vertical timings confusion, part 1

Unfortunately that commit failed to take into account that the lvds
code does some special adjustements to the crtc timings for upscaling
an centering.

Fix this by explicitly computing crtc timings in the lvds mode fixup
function and setting a special flag in mode->private_flags if the crtc
timings have been adjusted.

v2: Add a comment to explain the new mode driver private flag,
suggested by Eugeni Dodonov.

v3: Kill the confusing and now redundant set_crtcinfo call in
intel_fixed_panel_mode, noticed by Chris Wilson.

Reported-and-Tested-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43071
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-16 09:21:55 +02:00
Linus Walleij
f27962ac68 ARM: ux500: update defconfig
Some new drivers and changed Kconfig dependencies for the v3.4
kernel affecting the U8500 defconfig:

- The SOC config options are now brought in by default
- No need to explicitly select misc devices anymore
- I2C is selected by default
- We now have support for charging from the AB8500 so compile
  in this
- The regulator framework needs to be explictly selected

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-16 09:00:53 +02:00