Commit graph

310,437 commits

Author SHA1 Message Date
Arik Nemtsov
cd70f6a48b wlcore/wl12xx: add hw op for getting rx buffer data alignment
An aligned data buffer is such where the Ethernet portion of the packet
starts on a 4-byte boundary. Some chip families support padding the Rx
data buffer to achieve such alignment, others rely on the host to perform
it.
Implement the HW op for getting alignment state in wl12xx. Add
support for HW-padded alignment in the Rx flow.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:59 +03:00
Arik Nemtsov
5766435e2f wlcore: introduce Rx block-size alignment HW quirk
For chip-families that support aligned buffers in the Rx side. The Rx
flow changes slightly for these chips.

Currently these modifications rely on a hard-coded block-size of 256.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:59 +03:00
Arik Nemtsov
43a8bc5a53 wlcore/wl12xx: add global elements to convert hw-rates to standard rates
Rates reported by HW can be different between chip families. Make the
rate-to-idx translation tables private per family and use them in a
common translation function. Add a global element to help determine
which rates are HW HT-rates.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:59 +03:00
Arik Nemtsov
6f266e912c wlcore/wl12xx: add hw op for setting frame length in tx_hw_desc
Each chip family indicates the length of a frame to the HW differently.
This includes different padding, alignment and other fields in the HW Tx
descriptor.

Put all wl12xx specific code in a hw op.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:59 +03:00
Arik Nemtsov
4a3b97eea2 wlcore/wl12xx: add hw op for setting blocks in hw_tx_desc
Each chip family has a slightly different Tx descriptor. Set the
descriptor values according to family.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:59 +03:00
Arik Nemtsov
b3b4b4b812 wlcore/wl12xx: add hw op for calculating hw block count per packet
Each chip family has a different block size and calculates the total
number of HW blocks differently, with respect to alignment.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:59 +03:00
Arik Nemtsov
3edab305df wlcore/wl12xx: change GEM Tx-spare blocks per-vif
The number of spare Tx blocks must be changed when the GEM cipher is
engaged. Track set_key() operations to see if this is the case and
change the Tx HW spare block count accordingly. Set the number of spare
blocks for each operating mode from the low level driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:58 +03:00
Arik Nemtsov
72b0624fa5 wlcore/wl12xx: set the number of Tx descriptors per chip family
Each chip family can have a different amount of Tx descriptors. These
are set on init.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:58 +03:00
Arik Nemtsov
96e0c6837b wlcore/wl12xx: create per-chip-family private storage
This storage is allocated in wlcore_alloc_hw and freed in free_hw. The
size of the storage is determined by the low-level driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:58 +03:00
Luciano Coelho
441101f678 wlcore: add quirk to disable ELP
ELP is a very complicated process in the firmware.  Due to its
complexity, in some early firmware revisions, the ELP feature is
disabled.  To support this cases, this patch adds a quirk that
disables ELP mode.

When ELP is not supported, do not attempt to enter ELP when requested by
the driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:58 +03:00
Luciano Coelho
4263c5f27c wlcore: remove some unnecessary event mailbox address reads
We were reading the even mailbox address three times, which was
completely unnecessary and complicated things regarding partition
selection.  Remove the unnecessry reads and set the address for
mailbox 1 and 2 after the first read.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:58 +03:00
Luciano Coelho
d203e59c4b wlcore/wl12xx: add quirk for legacy NVS support
Instead of checking the chip ID directly in the wlcore code to decide
whether to use the new or the old NVS format, we now use a quirk that
should be set by the low level driver to say that it needs to use the
old format.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:57 +03:00
Luciano Coelho
f16ff75872 wlcore/wl12xx: add command trigger and event ack operations
Different chips may use different bits in the interrupt trigger
register.  Add operations to handle these differences.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:57 +03:00
Luciano Coelho
30d9b4a58b wlcore/wl12xx: move MAC address reading operation to lower driver
Different chip families have the factory MAC address written in
different places.  Add a new hardware operation to read the MAC
address, if available.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:57 +03:00
Luciano Coelho
dd5512eb6b wlcore/wl12xx: move top initialization to wl12xx
The top registers initialization is very specific to the actual
hardware used, even the way in which we read from and write to the top
registers varies from chip to chip.  This patch moves all top
registers initialization to wl12xx.  Also add a boot op for the wlcore
module to call at the right time and a few callbacks with the common
called to be called from the lower drivers boot operations.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:57 +03:00
Luciano Coelho
4ded91ced9 wlcore/wl12xx: move get_pg_ver to the lower driver
The PG version depends on the actual hardware.  This commit moves the
code used to read the PG version to the lower driver, by adding the
get_pg_ver hardware operation.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:57 +03:00
Luciano Coelho
6f7dd16cb1 wlcore/wl12xx: add chip-specific identify chip operation
Move the code that identifies the chip ID and selects the appropriate
firmware to an operation implemented by the lower driver.  Also move
the quirks definitions into wlcore.h and rename to WLCORE_QUIRK_*.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:57 +03:00
Luciano Coelho
00782136b4 wlcore/wl12xx: implement chip-specific register tables
Add register tables support in wlcore, add some new IO functions to
read and write to chip-specific register and data addresses.  Move
some common register values from wl12xx to wlcore and add the
registers table to wl12xx.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:56 +03:00
Luciano Coelho
25a43d78eb wlcore/wl12xx: implement chip-specific partition tables
Add partition tables to wlcore, move and reorganize partition setting
functions.  Move wl12xx partition table to use the wlcore partition
table instead.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:56 +03:00
Luciano Coelho
c31be25a71 wl12xx/wlcore: move wl1271 struct to wlcore and add ops
In order to add chip-specific operations and prepare for future
elements that need to be set by the lower driver, move the wl1271
structure to the wlcore.h file and add an empty placeholder for the
operations structure.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:56 +03:00
Luciano Coelho
ffeb501c6c wl12xx/wlcore: initial split of probe
We need to set some parameters (eg. partition and register tables)
during probe of the lower driver, so split the probe function, leaving
most of it in wlcore, but moving the hw struct allocation to the lower
driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:56 +03:00
Luciano Coelho
b2ba99ff32 wl12xx/wlcore: spin out the wl12xx probe from wlcore to a new wl12xx
Create a new small wl12xx module that only contains the probe
functions and depends entirely on wlcore otherwise.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:56 +03:00
Luciano Coelho
7b3115f265 wl12xx/wlcore: rename wl12xx to wlcore
Rename the wl12xx driver directory to wlcore as an initial step
towards the split of the driver into wlcore and wl12xx.  We just
rename the directory first to keep git blame happy.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12 08:43:56 +03:00
Luciano Coelho
9092101460 wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectory
Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti
directory.  Add a TI WLAN Kconfig option and Makefile to support this
change.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Cc: John W. Linville <linville@tuxdriver.com>
2012-04-12 08:43:55 +03:00
Jesper Juhl
0e3d0f3d96 Input: da9052 - fix memory leak in da9052_onkey_probe()
If, in drivers/input/misc/da9052_onkey.c::da9052_onkey_probe(), the
call to either kzalloc() or input_allocate_device() fails then we will
return -ENOMEM from the function without freeing the other allocation
that may have succeeded, thus we leak either the memory allocated for
'onkey' or the memory allocated for 'input_dev' if one succeeds and
the other fails.
Fix that by jumping to the 'err_free_mem' label at the end of the
function that properly cleans up rather than returning directly.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-11 22:15:04 -07:00
Linus Torvalds
45852766a0 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
 "Fixes for two nasty regression affecting powerpc in 3.4."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix typo in runlatch code
  powerpc: Fix page fault with lockdep regression
2012-04-11 20:56:28 -07:00
Sachin Prabhu
4fe9e9639d Cleanup handling of NULL value passed for a mount option
Allow blank user= and ip= mount option. Also clean up redundant
checks for NULL values since the token parser will not actually
match mount options with NULL values unless explicitly specified.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-04-11 22:53:02 -05:00
Alex Williamson
32f6daad46 KVM: unmap pages from the iommu when slots are removed
We've been adding new mappings, but not destroying old mappings.
This can lead to a page leak as pages are pinned using
get_user_pages, but only unpinned with put_page if they still
exist in the memslots list on vm shutdown.  A memslot that is
destroyed while an iommu domain is enabled for the guest will
therefore result in an elevated page reference count that is
never cleared.

Additionally, without this fix, the iommu is only programmed
with the first translation for a gpa.  This can result in
peer-to-peer errors if a mapping is destroyed and replaced by a
new mapping at the same gpa as the iommu will still be pointing
to the original, pinned memory address.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-11 22:55:25 -03:00
Scott Wood
9de6fe91af KVM: PPC: add CPU_FTR_EMB_HV to CPU table
e6500 support (commit 10241842fb,
"powerpc: Add initial e6500 cpu support" and the introduction of
CPU_FTR_EMB_HV (commit 73196cd364,
"KVM: PPC: e500mc support") collided during merge, leaving e6500's CPU
table entry missing CPU_FTR_EMB_HV.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-11 22:00:48 -03:00
Markus Franke
8f1e12512e w1: Disable irqs during 1-wire bus operations, extend 1-wire reset pulse
This patch offers the possibility to disables irqs during w1_write_bit()
and w1_reset_bus() operations as timing requirements are very strict for
the 1-wire bus protocol. Per default interrupts are enabled but can be
disabled via the module parameter "w1_disable_irqs".

Extend 1-wire reset pulse length from 480us to 500us as 480us is the
minimum requirement for the 1-wire reset/presence pulse.

Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11 16:44:10 -07:00
Markus Franke
f19420c1ac w1: Add 1-wire slave device driver for DS28E04-100
This patch adds a 1-wire slave device driver for the DS28E04-100.

Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11 16:44:10 -07:00
H Hartley Sweeten
a1eacd79a6 arm: ep93xx: use gpio_led_register_device
Use gpio_led_register_device to register the two leds
connected to the ep93xx.

Since this is a common feature for all ep93xx based boards,
create a new Kconfig option, EP93XX_SOC_COMMON, to select
the LEDS_GPIO_REGISTER feature.

The struct gpio_led and struct gpio_led_platform_data variables
have been changed to const struct because of:

commit 9517f925f2
	leds: make *struct gpio_led_platform_data.leds const

They have also been marked as __initconst because the helper
function gpio_led_register_device makes a deep copy of the
platform data to allow it to live in init memory:

commit 4440673a95
	leds: provide helper to register "leds-gpio" devices

Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-12 09:38:15 +10:00
Ryan Mallon
011b2e8458 Fix build breakage in ep93xx-core
Commit ede55aaa8b "arm: ep93xx: use
DEFINE_RES_* macros" introduced a build breakage in ep93xx due to a
typo. Fix it.

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-04-12 09:27:55 +10:00
Thomas Gleixner
d48fc63f6f Revert "clocksource: Load the ACPI PM clocksource asynchronously"
This reverts commit b519508298.

The reason for this revert is that making the frequency verification
preemptible and interruptible is not working reliably. Michaels
machine failed to use PM-timer with the message:

  PM-Timer running at invalid rate: 113% of normal - aborting.

That's not a surprise as the frequency verification does rely on
interrupts being disabled. With a async scheduled thread there is no
guarantee to achieve the same result. Also some driver might fiddle
with the CTC channel 2 during the verification period, which makes the
result even more random and unpredictable.

This can be solved by using the same mechanism as we use in the
deferred TSC validation code, but that only will work if we verified a
working HPET _BEFORE_ trying to do the PM-Timer lazy validation.

So for now reverting is the safe option.

Bisected-by: Michael Witten <mfwitten@gmail.com>
Cc: Arjan van de Ven <arjanvandeven@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <alpine.LFD.2.02.1204112303270.2542@ionos>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-04-12 00:05:05 +02:00
Stanislav Kinsbursky
b89109bef4 nfsd: pass network context to export caches init/shutdown routines
These functions will be called from per-net operations.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 18:01:33 -04:00
Stanislav Kinsbursky
e3f70eadb7 Lockd: pass network namespace to creation and destruction routines
v2: dereference of most probably already released nlm_host removed in
nlmclnt_done() and reclaimer().

These routines are called from locks reclaimer() kernel thread. This thread
works in "init_net" network context and currently relays on persence on lockd
thread and it's per-net resources. Thus lockd_up() and lockd_down() can't relay
on current network context. So let's pass corrent one into them.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:06 -04:00
Stanislav Kinsbursky
f890edbbef NFSd: remove hard-coded dereferences to name-to-id and id-to-name caches
These dereferences to global static caches are redundant. They also prevents
converting these caches into per-net ones. So this patch is cleanup + precursor
of patch set,a which will make them per-net.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:05 -04:00
Stanislav Kinsbursky
c89172e36e nfsd: pass pointer to expkey cache down to stack wherever possible.
This cache will be per-net soon. And it's easier to get the pointer to desired
per-net instance only once and then pass it down instead of discovering it in
every place were required.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:05 -04:00
Stanislav Kinsbursky
83e0ed700d nfsd: use hash table from cache detail in nfsd export seq ops
Hard-code is redundant and will prevent from making caches per net ns.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:04 -04:00
Stanislav Kinsbursky
f2c7ea10f9 nfsd: pass svc_export_cache pointer as private data to "exports" seq file ops
Global svc_export_cache cache is going to be replaced with per-net instance. So
prepare the ground for it.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:03 -04:00
Stanislav Kinsbursky
a09581f294 nfsd: use exp_put() for svc_export_cache put
This patch replaces cache_put() call for svc_export_cache by exp_put() call.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:02 -04:00
Stanislav Kinsbursky
71234978e8 nfsd: use cache detail pointer from svc_export structure on cache put
Hard-coded pointer is redundant now and can be replaced.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:02 -04:00
Stanislav Kinsbursky
db3a353263 nfsd: add link to owner cache detail to svc_export structure
Without info about owner cache datail it won't be able to find out, which
per-net cache detail have to be.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:01 -04:00
Stanislav Kinsbursky
d4bb527e9e nfsd: use passed cache_detail pointer expkey_parse()
Using of hard-coded svc_expkey_cache pointer in expkey_parse() looks redundant.
Moreover, global cache will be replaced with per-net instance soon.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:00 -04:00
Jeff Layton
33dcc481ed nfsd: don't use locks_in_grace to determine whether to call nfs4_grace_end
It's possible that lockd or another lock manager might still be on the
list after we call nfsd4_end_grace. If the laundromat thread runs
again at that point, then we could end up calling nfsd4_end_grace more
than once.

That's not only inefficient, but calling nfsd4_recdir_purge_old more
than once could be problematic. Fix this by adding a new global
"grace_ended" flag and use that to determine whether we've already
called nfsd4_grace_end.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:55:00 -04:00
Simo Sorce
a9aa53df6e svcauth: remove unused define
Signed-off-by: Simo Sorce <simo@redhat.com>
2012-04-11 17:54:59 -04:00
Jeff Layton
03af42c59e nfsd: trivial: remove unused variable from nfsd4_lock
..."fp" is set but never used.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:54:58 -04:00
J. Bruce Fields
9dc4e6c4d1 nfsd: don't fail unchecked creates of non-special files
Allow a v3 unchecked open of a non-regular file succeed as if it were a
lookup; typically a client in such a case will want to fall back on a
local open, so succeeding and giving it the filehandle is more useful
than failing with nfserr_exist, which makes it appear that nothing at
all exists by that name.

Similarly for v4, on an open-create, return the same errors we would on
an attempt to open a non-regular file, instead of returning
nfserr_exist.

This fixes a problem found doing a v4 open of a symlink with
O_RDONLY|O_CREAT, which resulted in the current client returning EEXIST.

Thanks also to Trond for analysis.

Cc: stable@kernel.org
Reported-by: Orion Poplawski <orion@cora.nwra.com>
Tested-by: Orion Poplawski <orion@cora.nwra.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-11 17:49:52 -04:00
Srinivas Kandagatla
30059d93b0 [media] kernel:kfifo: export __kfifo_max_r symbol
kfifo_avail expands to __kfifo_max_r which is not an exported symbol.
Any kernel module using kfifo_avail will result in build failures
because of this.
This patch just exports __kfifo_max_r symbol to fix such problems in
future.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-11 18:24:37 -03:00
Robert Richter
5a7ed29c75 perf record: Use sw counter only if hw pmu is not detected
Use cpu-clock-tick sw counter for cpu-cycles only if there is no hw
pmu available. This is the case if the syscall reports ENOENT. In
other cases (e.g. invalid attributes) we don't want the sw counter to
be used.

Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:39:19 -03:00