Commit graph

310,437 commits

Author SHA1 Message Date
Shawn Guo
c0d78c2342 regulator: anatop: fix 'anatop_regulator' name collision
There is a name collision between 'struct platform_driver
anatop_regulator' and 'struct anatop_regulator', which causes some
section mismatch warnings like below.

WARNING: vmlinux.o(.data+0x154d4): Section mismatch in reference from the variable anatop_regulator to the function .devinit.text:anatop_regulator_probe()
The variable anatop_regulator references
the function __devinit anatop_regulator_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Rename 'struct platform_driver anatop_regulator' to
'struct platform_driver anatop_regulator_driver' to fix the warnings.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:28:58 +01:00
Axel Lin
939b62d897 regulator: Convert mc13xxx regulator drivers to set_voltage_sel
Convert mc13892_sw_regulator_ops and mc13xxx_regulator_ops to set_voltage_sel.
mc13xxx_get_best_voltage_index function is not used now, remove it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:24:46 +01:00
Laxman Dewangan
a4d9f179cc regulator: fixed: Support for open drain gpio pin
Adding flag on fixed regulator board configuration structure
to specify whether gpio is open drain type or not.
Passing this information to gpio library when requesting
gpio so that gpio driver can set the pin state accordingly,
for open drain type:
- Pin can be set HIGH as setting as input, PULL UP on
  pin make this as HIGH.
- Pin can be set LOW as setting it as output and drive to LOW.

The non-open drain pin can be  set HIGH/LOW by setting it to
output and driving it to HIGH/LOW.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:17:53 +01:00
Axel Lin
d1cf4f65e1 regulator: Add support for tps62362 and tps62363 in tps62360-regulator driver
According to the datasheet[1], tps62360 is register compatible with tps62362.
tps62361B is register compatible with tps62363.
Thus this patch adds support for tps62362 and tps62363.

[1] http://www.ti.com/litv/pdf/slvsau9b

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:16:16 +01:00
Axel Lin
7f52ba7791 regulator: Add missing n_voltages setting for max8925
The n_voltages are the same for all regulators: (max - min / step) + 1 == 64.
The vol_shift is always 0, and the vol_nbits is always the same as n_voltages
setting. Thus we can remove vol_shitf and vol_nbits fields from struct
max8925_regulator_info.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:15:19 +01:00
Axel Lin
42ff943148 regulator: Set list_voltage callback for max8925
Current code implements max8925_list_voltage but does not set the list_voltage
callback function in max8925_regulator_[ldo|sdv]_ops. Fix it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:15:19 +01:00
M R Swami Reddy
152ad44231 ASoC: MAINTAINERS: Add maintainer for TI LM49453 Audio codec driver
I will be supporting the TI LM49453 audio driver and also a few new TI codec
drivers, that are currently in development and will be upstreamed shortly.

Signed-off-by: M R Swami Reddy <mr.swami.reddy@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:08:27 +01:00
Martin Jansa
e95cee0e36 ASoC: pxa: pxa2xx-i2s: add io.h for IOMEM macro
* fixes
  sound/soc/pxa/pxa2xx-i2s.c:86:2: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]
  sound/soc/pxa/pxa2xx-i2s.c:86:2: error: initializer element is not constant
  after 23019a733b removed IOMEM
  definition from arch/arm/mach-pxa/include/mach/hardware.h

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:02:20 +01:00
Stephen Warren
cd1506736f ASoC: tegra: ensure clocks are enabled when touching registers
Debugfs files could be accessed any time, so explicitly enable clocks
when reading registers to generate debugfs file content.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:02:11 +01:00
Zeng Zhaoming
f0cdcf3ab6 ASoC: sgtl5000: Enable VAG when DAC/ADC up
As manual described, VAG is an internal voltage reference of DAC/ADC,
So enabled it before DAC/ADC up.

One more thing should care about is VAG fully ramped down requires 400ms,
wait it to avoid pop.

Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02 23:02:11 +01:00
Linus Torvalds
95694129b4 Merge branch 'paul' (Fixups from Paul Gortmaker)
This merges some of the fixes from Paul Gortmaker for the header file
cleanup fallout.

Some of the patches are going through arch maintainer trees, and David
Howells suggested another be done differently, but this at least fixes a
few cases.

* emailed from Paul Gortmaker <paul.gortmaker@windriver.com>:
  asm-generic: add linux/types.h to cmpxchg.h
  firewire: restore the device.h include in linux/firewire.h
  frv: fix warnings in mb93090-mb00/pci-dma.c about implicit EXPORT_SYMBOL
  parisc: fix missing cmpxchg file error from system.h split
  blackfin: fix cmpxchg build fails from system.h fallout
  avr32: fix build failures from mis-naming of atmel_nand.h
  ARM: mach-msm: fix compile fail from system.h fallout
  irq_work: fix compile failure on MIPS from system.h split
2012-04-02 14:41:43 -07:00
Matt Carlson
085f1afc56 tg3: Fix 5717 serdes powerdown problem
If port 0 of a 5717 serdes device powers down, it hides the phy from
port 1.  This patch works around the problem by keeping port 0's phy
powered up.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 17:41:42 -04:00
Paul Gortmaker
80da6a4fee asm-generic: add linux/types.h to cmpxchg.h
Builds of the openrisc or1ksim_defconfig show the following:

  In file included from arch/openrisc/include/generated/asm/cmpxchg.h:1:0,
                   from include/asm-generic/atomic.h:18,
                   from arch/openrisc/include/generated/asm/atomic.h:1,
                   from include/linux/atomic.h:4,
                   from include/linux/dcache.h:4,
                   from fs/notify/fsnotify.c:19:
  include/asm-generic/cmpxchg.h: In function '__xchg':
  include/asm-generic/cmpxchg.h:34:20: error: expected ')' before 'u8'
  include/asm-generic/cmpxchg.h:34:20: warning: type defaults to 'int' in type name

and many more lines of similar errors.  It seems specific to the or32
because most other platforms have an arch specific component that would
have already included types.h ahead of time, but the o32 does not.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:27 -07:00
Paul Gortmaker
f68c56b7d2 firewire: restore the device.h include in linux/firewire.h
Commit 313162d0b8 ("device.h: audit and cleanup users in main include
dir") exchanged an include <linux/device.h> for a struct *device but in
actuality I misread this file when creating 313162d and it should have
remained an include.

There were no build regressions since all consumers were already getting
device.h anyway, but make it right regardless.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:27 -07:00
Paul Gortmaker
9a78da114c frv: fix warnings in mb93090-mb00/pci-dma.c about implicit EXPORT_SYMBOL
To fix:

    arch/frv/mb93090-mb00/pci-dma.c:31:1: warning: data definition has no type or storage class [enabled by default]
    arch/frv/mb93090-mb00/pci-dma.c:31:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
    arch/frv/mb93090-mb00/pci-dma.c:31:1: warning: parameter names (without types) in function declaration [enabled by default]
    arch/frv/mb93090-mb00/pci-dma.c:38:1: warning: data definition has no type or storage class [enabled by default]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:26 -07:00
Paul Gortmaker
9e5228ce0b parisc: fix missing cmpxchg file error from system.h split
Commit b4816afa39 ("Move the asm-generic/system.h xchg()
implementation to asm-generic/cmpxchg.h") introduced the concept of
asm/cmpxchg.h but the parisc arch never got one.  Fork the cmpxchg
content out of the asm/atomic.h file to create one.

Some minor whitespace fixups were done on the block of code that created
the new file.

Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:26 -07:00
Paul Gortmaker
1512cdc357 blackfin: fix cmpxchg build fails from system.h fallout
Commit 3bed8d6746 ("Disintegrate asm/system.h for Blackfin [ver #2]")
introduced arch/blackfin/include/asm/cmpxchg.h but has it also including
the asm-generic one which causes this:

  CC      arch/blackfin/kernel/asm-offsets.s
  In file included from arch/blackfin/include/asm/cmpxchg.h:125:0,
                 from arch/blackfin/include/asm/atomic.h:10,
                 from include/linux/atomic.h:4,
                 from include/linux/spinlock.h:384,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:57,
                 from arch/blackfin/kernel/asm-offsets.c:10:
  include/asm-generic/cmpxchg.h:24:15: error: redefinition of '__xchg'
  arch/blackfin/include/asm/cmpxchg.h:82:29: note: previous definition of '__xchg' was here
  make[2]: *** [arch/blackfin/kernel/asm-offsets.s] Error 1

It really only needs two simple defines from asm-generic, so just use
those instead.

Cc: Bob Liu <lliubbo@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:25 -07:00
Paul Gortmaker
3d92e05118 avr32: fix build failures from mis-naming of atmel_nand.h
Commit bf4289cba0 ("ATMEL: fix nand ecc support") indicated that it
wanted to "Move platform data to a common header
include/linux/platform_data/atmel_nand.h" and the new header even had
re-include protectors with:

    #ifndef __ATMEL_NAND_H__

However, the file that was added was simply called atmel.h
and this caused avr32 defconfig to fail with:

  In file included from arch/avr32/boards/atstk1000/setup.c:22:
  arch/avr32/mach-at32ap/include/mach/board.h:10:44: error: linux/platform_data/atmel_nand.h: No such file or directory
  In file included from arch/avr32/boards/atstk1000/setup.c:22:
  arch/avr32/mach-at32ap/include/mach/board.h:121: warning: 'struct atmel_nand_data' declared inside parameter list
  arch/avr32/mach-at32ap/include/mach/board.h:121: warning: its scope is only this definition or declaration, which is probably not what you want
  make[2]: *** [arch/avr32/boards/atstk1000/setup.o] Error 1

It seems the scope of the file contents will expand beyond
just nand, so ignore the original intention, and fix up the
users who reference the bad name with the _nand suffix.

CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
CC: David Woodhouse <dwmw2@infradead.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:25 -07:00
Paul Gortmaker
b443caf12f ARM: mach-msm: fix compile fail from system.h fallout
To fix:

  In file included from arm/boot/compressed/misc.c:28:0:
  arm/mach-msm/include/mach/uncompress.h: In function 'putc':
  arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit
  declaration of function 'smp_mb' [-Werror=implicit-function-declaration]

The putc does a cpu_relax which for this platform is smp_mb.

Bisect indicates the 1st failing commit as: 0195c00244 ("Merge tag
'split-asm_system_h...")

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:16 -07:00
Jesse Gross
bf32fecdc1 openvswitch: Add length check when retrieving TCP flags.
When collecting TCP flags we check that the IP header indicates that
a TCP header is present but not that the packet is actually long
enough to contain the header.  This adds a check to prevent reading
off the end of the packet.

In practice, this is only likely to result in reading of bad data and
not a crash due to the presence of struct skb_shared_info at the end
of the packet.

Signed-off-by: Jesse Gross <jesse@nicira.com>
2012-04-02 14:28:57 -07:00
Roland Dreier
0559d8dc13 IB/core: Don't return EINVAL from sysfs rate attribute for invalid speeds
Commit e9319b0cb0 ("IB/core: Fix SDR rates in sysfs") changed our
sysfs rate attribute to return EINVAL to userspace if the underlying
device driver returns an invalid rate.  Apparently some drivers do this
when the link is down and some userspace pukes if it gets an error when
reading this attribute, so avoid a regression by not return an error to
match the old code.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-04-02 10:57:31 -07:00
Or Gerlitz
d2ef406866 IB/mlx4: Don't return an invalid speed when a port is down
When the IB port is down, the active_speed value returned by the
MAD_IFC command is seven (7) which isn't among the defined IB speeds
in enum ib_port_speed, and this invalid speed value is passed up to
higher layers or applications who do port query.

Fix that by setting the speed to be SDR -- the lowest possible -- when
the port is down.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-04-02 10:55:24 -07:00
Chris Metcalf
00a62d4bc9 drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing
Commit dae2e9f430 changed dev_alloc_skb()
to netdev_alloc_skb(), adding a dev pointer, but erroneously used "->"
instead of "." for a struct member when accessing the dev pointer.
This change fixes the build breakage.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 13:17:37 -04:00
Linus Torvalds
b1a808ff43 Merge branch 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi
Pull HSI (High Speed Synchronous Serial Interface) framework from Carlos Chinea:
 "The High Speed Synchronous Serial Interface (HSI) is a serial
  interface mainly used for connecting application engines (APE) with
  cellular modem engines (CMT) in cellular handsets.

  The framework is currently being used for some people and we would
  like to see it integrated into the kernel for 3.3.  There is no HW
  controller drivers in this pull, but some people have already some of
  them pending which they would like to push as soon as this integrated.
  I am also working on the acceptance for an TI OMAP one, based on a
  compatible legacy version of the interface called SSI."

Ok, so it didn't get into 3.3, but here it is pulled into 3.4.

Several people piped up to say "yeah, we want this".

* 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi:
  HSI: hsi_char: Update ioctl-number.txt
  HSI: Add HSI API documentation
  HSI: hsi_char: Add HSI char device kernel configuration
  HSI: hsi_char: Add HSI char device driver
  HSI: hsi: Introducing HSI framework
2012-04-02 09:50:40 -07:00
Linus Torvalds
9775417504 Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull 'make cscope' fix from Michal Marek:
 "The kbuild.git#misc pull request introduced a bug that broke make
  cscope.  Apparently, both the original author and me only tested the
  use case that the commit was supposed to improve (make tags/TAGS), and
  not the use case that was not supposed (make cscope)."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  tags.sh: Add missing quotes
2012-04-02 09:42:55 -07:00
Linus Torvalds
8f6b7676ce Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 - Fix for CPU hotplug hang in padata.
 - Avoid using cpu_active inappropriately in pcrypt and padata.
 - Fix for user-space algorithm lookup hang with IV generators.
 - Fix for netlink dump of algorithms where stuff went missing due to
   incorrect calculation of message size.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: user - Fix size of netlink dump message
  crypto: user - Fix lookup of algorithms with IV generator
  crypto: pcrypt - Use the online cpumask as the default
  padata: Fix cpu hotplug
  padata: Use the online cpumask as the default
  padata: Add a reference to the api documentation
2012-04-02 09:40:24 -07:00
Linus Torvalds
143418d0c8 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
 "This contains a couple more fixes for the system.h disintegration, a
  trivial section mismatch fix, a couple of patches from akpm that I
  didn't quite get he expected me to pickup, and a few more trivialities
  form Kumar that he appear to have forgotten to send me in the previous
  batch."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Fix use of set_current_state() in eeh event handling set_current_state() wart
  powerpc/eeh: Remove eeh_event_handler()->daemonize()
  powerpc/kvm: Fallout from system.h disintegration
  powerpc: Fix fallout from system.h split up
  powerpc: Mark const init data with __initconst instead of __initdata
  powerpc/qe: Update the SNUM table for MPC8569 Rev2.0
  powerpc/dts: Removed fsl,msi property from dts.
  powerpc/epapr: add "memory" as a clobber to all hypercalls
  powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigs
  powerpc/85xx: add the P1020UTM-PC DTS support
  powerpc/85xx: add the P1020MBG-PC DTS support
  powerpc/8xxx: remove 85xx/86xx restrictions from fsl_guts.h
2012-04-02 09:38:51 -07:00
Chris Metcalf
91445c72ca MAINTAINERS: update EDAC information
The bluesmoke mailing list no longer works, so use
linux-edac@vger.kernel.org.  And, use a less restrictive pattern so all
drivers/edac changes go to linux-edac as well.

Borislav suggested I just push this through the tile tree since there
is currently no core edac maintainer (emails to Doug Thompson bounce).

Acked-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:16 -04:00
Chris Metcalf
9279567289 tilepro ethernet driver: fix a few minor issues
This commit fixes a number of issues seen with the driver:

- Improve handling of return credits to the hardware shim
- Use skb_frag_size() appropriately
- Fix driver so it works properly with netpoll for console over UDP

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:13 -04:00
Chris Metcalf
16418bb1da tile-srom.c driver: minor code cleanup
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:10 -04:00
Chris Metcalf
e2e110d759 edac: say "TILEGx" not "TILEPro" for the tilegx edac driver
This is just an aesthetic change but it was silly to say TILEPro
when booting up on the tilegx architecture.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:06 -04:00
Chris Metcalf
e1d5c01950 arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally
The return path as we reload registers and core state requires that r30
hold a boolean indicating whether we are returning from an NMI, but in a
couple of cases we weren't setting this properly, with the result that we
could accidentally unmask the NMI interrupt(s), which could cause confusion.
Now we set r30 in every place where we jump into the interrupt return path.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:03 -04:00
Chris Metcalf
b1760c847f arch/tile: remove bogus performance optimization
We were re-homing the initial task's kernel stack on the boot cpu,
but in fact it's better to let it stay globally homed, since that
task isn't bound to the boot cpu anyway.  This is more of a general
cleanup than an actual performance optimization, but it removes
code, which is a good thing. :-)

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:59 -04:00
Chris Metcalf
cdd8e16feb arch/tile: return SIGBUS for addresses that are unaligned AND invalid
Previously we were returning SIGSEGV in this case.  It seems cleaner
to return SIGBUS since the hardware figures out alignment traps
before TLB violations, so SIGBUS is the "more correct" signal.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:56 -04:00
Chris Metcalf
54229ff359 arch/tile: fix finv_buffer_remote() for tilegx
There were some correctness issues with this code that are now fixed
with this change.  The change is likely less performant than it could
be, but it should no longer be vulnerable to any races with memory
operations on the memory network while invalidating a range of memory.
This code is run infrequently so performance isn't critical, but
correctness definitely is.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:53 -04:00
Chris Metcalf
ab306cae66 arch/tile: use atomic exchange in arch_write_unlock()
This idiom is used elsewhere when we do an unlock by writing a zero,
but I missed it here.  Using an atomic operation avoids waiting
on the write buffer for the unlocking write to be sent to the home cache.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:49 -04:00
Chris Metcalf
b14f219067 arch/tile: stop mentioning the "kvm" subdirectory
It causes "make clean" to fail, for example.  Once we have KVM support
complete, we'll reinstate the subdir reference.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:46 -04:00
Chris Metcalf
e81510e0c3 arch/tile: export the page_home() function.
This avois a bug in modules trying to use the function.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:42 -04:00
Chris Metcalf
918cbd38ae arch/tile: fix pointer cast in cacheflush.c
Pragmatically it couldn't be wrong to cast pointers to long to compare
them (since all kernel addresses are in the top half of VA space),
but it's more correct to cast to unsigned long.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:39 -04:00
Chris Metcalf
2858f85602 arch/tile: fix single-stepping over swint1 instructions on tilegx
If we are single-stepping and make a syscall, we call ptrace_notify()
explicitly on the return path back to user space, since we are returning
to a pc value set artificially to the next instruction, and otherwise
we won't register that we stepped over the syscall instruction (swint1).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:36 -04:00
Chris Metcalf
cb210ee3a8 arch/tile: implement panic_smp_self_stop()
This allows the later-panicking tiles to wait in a lower power state
until they get interrupted with an smp_send_stop().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:32 -04:00
Chris Metcalf
8c92ba6c32 arch/tile: add "nop" after "nap" to help GX idle power draw
This avoids the hardware istream prefetcher doing unnecessary work.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:29 -04:00
Chris Metcalf
bfffe79bc2 arch/tile: use proper memparse() for "maxmem" options
This is more standard and avoids having to remember what units
the options actually take.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:25 -04:00
Chris Metcalf
719ea79e33 arch/tile: fix up locking in pgtable.c slightly
We should be holding the init_mm.page_table_lock in shatter_huge_page()
since we are modifying the kernel page tables.  Then, only if we are
walking the other root page tables to update them, do we want to take
the pgd_lock.

Add a comment about taking the pgd_lock that we always do it with
interrupts disabled and therefore are not at risk from the tlbflush
IPI deadlock as is seen on x86.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:22 -04:00
Chris Metcalf
5f22070412 arch/tile: don't leak kernel memory when we unload modules
We were failing to track the memory when we allocated it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:19 -04:00
Chris Metcalf
444eef1ba4 arch/tile: fix bug in delay_backoff()
We were carefully computing a value to use for the number of loops
to spin for, and then ignoring it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:15 -04:00
Chris Metcalf
7a7039ee71 arch/tile: fix bug in loading kernels larger than 16 MB
Previously we only handled kernels up to a single huge page in size.
Now we create additional PTEs appropriately.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:12 -04:00
Chris Metcalf
b230ff2d5c arch/tile: don't enable irqs unconditionally in page fault handler
If we took a page fault while we had interrupts disabled, we
shouldn't enable them in the page fault handler.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:09 -04:00
Chris Metcalf
12400f1f22 arch/tile: don't set the homecache of a PTE unless appropriate
We make sure not to try to set the home for an MMIO PTE (on tilegx)
or a PTE that isn't referencing memory managed by Linux.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:05 -04:00
Chris Metcalf
48292738d0 arch/tile: don't wait for migrating PTEs in an NMI handler
Doing so raises the possibility of self-deadlock if we are waiting
for a backtrace for an oprofile or perf interrupt while we are
in the middle of migrating our own stack page.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:02 -04:00