Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as
three subdevs, pixel array, binner and scaler --- in case the device has a
scaler.
Currently it relies on the board code for external clock handling. There is
no fast way out of this dependency before the ISP drivers (omap3isp) among
others will be able to export that clock through the clock framework
instead.
Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Perform CCDC link validation in ccdc_link_validate() instead of
isp_video_validate_pipeline(). Also perform maximum data rate check in
isp_video_check_external_subdevs().
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use default link validation for ccp2, csi2, preview and resizer. On ccp2,
csi2 and ccdc we also collect information on external subdevs as one may be
connected to those entities.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove
means to set the value for isp_ccdc_vpcfg.pixelclk.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
isp_video_check_external_subdevs() will retrieve external subdev's
bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon
time. isp_video_check_external_subdevs() is called after pipeline
validation.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add pointer to external subdev, pixel rate of the external subdev and bpp of
the format to struct isp_pipeline.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Collect information on entities in pipeline in isp_video_far_end(), outside
pipeline validation. As this causes the function to have side effects,
rename the function accordingly.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add lane configuration (order of clock and data lane) to platform data on
both CCP2 and CSI-2.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since media_entity_pipeline_start() now does link validation, it may
actually fail. Perform the error handling.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The clock rate for l3_ick will soon be read during pipeline validation which
is now part of media_entity_pipeline_start(). For that reason we set
constraints earlier on.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
XCLK definitions are often required by the board code. Move them to public
include file.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Allow choosing the lock used by the control handler. This may be handy
sometimes when a driver providing multiple subdevs does not want to use
several locks to serialise its functions.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
v4l2_subdev_link_validate() is the default op for validating a link. In V4L2
subdev context, it is used to call a pad op which performs the proper link
check without much extra work.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Document that format related configuration is done through pad ops in case
the driver does use the media framework.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The purpose of the link_validate() op is to allow an entity driver to ensure
that the properties of the pads at the both ends of the link are suitable
for starting the pipeline. link_validate is called on sink pads on active
links which belong to the active part of the graph.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add three other colour orders for 10-bit to 8-bit DPCM compressed raw bayer
pixel formats.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Document guidelines how 4CC codes should be named. Only raw bayer is
included currently. Other formats should be documented later on.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add control class for image processing controls. The control class deals
with controls processing image, for example digital gain or noise filtering,
which can be present in any part of the pipeline.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add image source control class. This control class is intended to contain
low level controls which deal with control of the image capture process ---
the A/D converter in image sensors, for example.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L2 uses the enum type in IOCTL arguments in IOCTLs that were defined until
the use of enum was considered less than ideal. Recently Rémi Denis-Courmont
brought up the issue by proposing a patch to convert the enums to unsigned:
<URL:http://www.spinics.net/lists/linux-media/msg46167.html>
This sparked a long discussion where another solution to the issue was
proposed: two sets of IOCTL structures, one with __u32 and the other with
enums, and conversion code between the two:
<URL:http://www.spinics.net/lists/linux-media/msg47168.html>
Both approaches implement a complete solution that resolves the problem. The
first one is simple but requires assuming enums and __u32 are the same in
size (so we won't break the ABI) while the second one is more complex and
less clean but does not require making that assumption.
The issue boils down to whether enums are fundamentally different from __u32
or not, and can the former be substituted by the latter. During the
discussion it was concluded that the __u32 has the same size as enums on all
archs Linux is supported: it has not been shown that replacing those enums
in IOCTL arguments would break neither source or binary compatibility. If no
such reason is found, just replacing the enums with __u32s is the way to go.
This is what this patch does. This patch is slightly different from Remi's
first RFC (link above): it uses __u32 instead of unsigned and also changes
the arguments of VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY.
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Update the nonmi_ipi parameter to reflect the simple change
instead of the previous complicated one. There should be less
of a need to use it but there may still be corner cases on older
hardware that stumble into NMI issues.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336761675-24296-4-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For v3.3, I added code to use the NMI to stop other cpus in the
panic case. The idea was to make sure all cpus on the system
were definitely halted to help serialize the panic path to
execute the rest of the code on a single cpu.
The main problem it was trying to solve was how to stop a cpu
that was spinning with its irqs disabled. A IPI irq would be
stuck and couldn't get in there, but an NMI could.
Things were great until we had another conversation about some
pstore changes. Because some of the backend pstore still uses
spinlocks to protect the device access, things could get ugly if
a panic happened and we were stuck spinning on a lock.
Now with the NMI shutting down cpus, we could assume no other
cpus were running and just bust the spin lock and proceed.
The counter argument was, well if you do that the backend could
be in a screwed up state and you might not be able to save
anything as a result. If we could have just given the cpu a
little more time to finish things, we could have grabbed the
spin lock cleanly and everything would have been fine.
Well, how do give a cpu a 'little more time' in the panic case?
For the most part you can't without spinning on the lock and
even in that case, how long do you spin for?
So instead of making it ugly in the pstore code, just mimic the
idea that stop_machine had, which is block on an IRQ IPI until
the remote cpu has re-enabled interrupts and left the critical
region. Which is what happens now using REBOOT_IRQ.
Then leave the NMI case for those cpus that are truly stuck
after a short time. This leaves the current behaviour alone and
just handle a corner case. Most systems should never have to
enter the NMI code and if they do, print out a message in case
the NMI itself causes another issue.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336761675-24296-3-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 3603a2512f.
Originally I wanted a better hammer to shutdown cpus during
panic. However, this really steps on the toes of various
spinlocks in the panic path. Sometimes it is easier to wait for
the IRQ to become re-enabled to indictate the cpu left the
critical region and then shutdown the cpu.
The next patch moves the NMI addition after the IRQ part. To
make it easier to see the logic of everything, revert this patch
and apply the next simpler patch.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336761675-24296-2-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The naming EXYNOS4 is changed to EXYNOS for using shared SPI
config of EXYNOS4 and EXYNOS5. And S3C64XX_DEV_SPIn configs
are added to MACH_SMDK5250 config to use SPI on the EYXNOS5250.
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
[kgene.kim@samsung.com: updated because of non-existing config]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The SSR.MD status amongst other things are already made available, which
can be used for encoding a more precise fault code value.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
More like Linus', but hey at least an attempt at implementing a suggestion by
Arjan made this time around!
. Fix indirect calls beautifier, reported by Linus.
. Use the objdump comments to nuke specificities about how access to a well
know variable is encoded, suggested by Linus.
. Show the number of places that jump to a target, requested by Arjan.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=cE1R
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Arjan & Linus Annotation Edition
- Fix indirect calls beautifier, reported by Linus.
- Use the objdump comments to nuke specificities about how access to a well
know variable is encoded, suggested by Linus.
- Show the number of places that jump to a target, requested by Arjan.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trying to flush completed packets is pointless when the pointer
callback was called from the packet completion callback; avoid it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By flushing all completed but not yet reported packets before reading
the PCM hardware position, the granularity of the pointer is improved
from the interrupt interval to the packet size.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent added mxs gpio device tree bindings require gpio nodes
defined under pinctrl node too. The pinctrl-mxs driver should skip
these node for group parsing and creating.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The following patch might introduce this call chain:
PCM .pointer callback
+ fw_iso_context_flush_completions
+ packet callback
+ snd_pcm_period_elapsed
+ PCM .pointer callback
Recursive calls to the pointer callback are not possible due to the PCM
group locking, so avoid this by moving the period notification into
a separate tasklet.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial mxs pinctrl support, commit 1772311 (pinctrl: add
pinctrl-mxs support) skipped creating group from device tree pin config
node. Add it to get pin config node work for client device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The instruction emulation for bsrw is broken in KVM because
the code always uses bsr with 32 or 64 bit operand size for
emulation. Fix that by using emulate_2op_SrcV_nobyte() macro
to use guest operand size for emulation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If we fail while registering a regulator make sure we release the supply
for the regulator if there is one.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@vger.kernel.org
This unifies the fast-path TLB miss handler, allowing for further cleanup
and eventual utilization of a shared _32/_64 handler.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Integer division may truncate the result.
Use DIV_ROUND_UP to ensure simple linear voltage mappings falls within the
specified range.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Now that the fast-path handler has been moved, we also need to update the
Makefile to ensure that the same restrictions for caller-save registers
are observed.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This brings the sh64 version in line with the sh32 one with regards to
how errors are handled. Base work for further unification of the
implementations.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When trying to add a new tt_local_entry, if such entry already exists, we have
to ensure that the TT_CLIENT_PENDING flag is not set, otherwise the entry will
be deleted soon.
Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Now that we have a method for finding out if we're handling an ITLB fault
or not without passing it all the way down the chain, it's possible to
use the __update_tlb() interface in place of a special __do_tlb_refill().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
- Add routing_algo
- Remove date from README:
The date has to be updated when a patch touches the README. Therefore, nearly
every feature will modify this date. It can happens quite often that not only
one feature is currently in development or waiting on the mailinglist. This
creates merge conflicts when applying a patchset.
The date itself doesn't provide any additional information when this file is
only available in a release tarball or as part of a SCM repository.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
