mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
4,232 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
36808d5e98 |
Driver core changes for 7.2-rc1
- deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
- device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
- device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
- driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
- firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
- platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
- sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
- Rust:
- ACPI:
- Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
- Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device
private data beyond the driver's own scope, creating ordering
constraints and forcing the data to outlive all registrations
that access it. Registration data is instead scoped structurally
to the Registration object, making lifecycle ordering enforced
by construction rather than convention.
- Rust-native device driver lifetimes (HRT):
- Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly
in the driver's bus device private data with a lifetime bounded
by the binding scope, so the compiler enforces at build time that
they do not outlive the binding. This removes Devres indirection
from every access site and eliminates try_access() failure paths
in destructors.
Bus driver traits use a Generic Associated Type (GAT)
Data<'bound> to introduce the lifetime on the private data,
rather than parameterizing the Driver trait itself. Auxiliary
registration data, where the lifetime is not introduced by a
trait callback but must be threaded through Registration, uses
the ForLt trait (a type-level abstraction for types generic over
a lifetime).
- Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCai1lNQAKCRBFlHeO1qrK
LjX1AP4kEb6SJdvBFlG/IJcG9vyqA7+Cig8OIlx9vEX7e7GvNwEAxL2HltAlAd5Q
cOIJOlu0uM+j1mn0JyuM9b0WJrxDLAA=
=E5mG
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
||
|
|
9abc374499 |
Merge branch 'pm-cpufreq'
Merge cpufreq updates for 7.2: - Fix a race between cpufreq suspend and CPU hotplug during system shutdown (Tianxiang Chen) - Avoid redundant target() calls for unchanged limits and fix a typo in a comment in the cpufreq core (Viresh Kumar) - Fix concurrency issues related to sysfs attributes access that affect cpufreq governors using the common governor code (Zhongqiu Han) - Simplify frequency limit handling in the conservative cpufreq governor (Lifeng Zheng) - Fix descriptions of the conservative governor freq_step tunable and the ondemand governor sampling_down_factor tunable in the cpufreq documentation (Pengjie Zhang) - Fix use-after-free and double free during _OSC evaluation in the PCC cpufreq driver (Yuho Choi) - Rework the handling of policy min and max frequency values in the cpufreq core to allow drivers to specify special initial values for the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre Gondois) - Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das, Imran Shaik). - Improve the warning message on HWP-disabled hybrid processors printed by the intel_pstate driver and sync policy->cur during CPU offline in it (Yohei Kojima, Fushuai Wang) - Drop cpufreq support for AMD Elan SC4* (Sean Young) - Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo) - Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian Braha) * pm-cpufreq: (25 commits) cpufreq: Use policy->min/max init as QoS request cpufreq: Remove driver default policy->min/max init cpufreq: Set default policy->min/max values for all drivers cpufreq: Extract cpufreq_policy_init_qos() function cpufreq: Documentation: fix conservative governor freq_step description cpufreq: ti: Add EPROBE_DEFER for K3 SoCs cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load cpufreq: governor: Fix data races on per-CPU idle/nice baselines cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs cpufreq: elanfreq: Drop support for AMD Elan SC4* cpufreq: clean up dead dependencies on X86 in Kconfig cpufreq: conservative: Simplify frequency limit handling cpufreq: Avoid redundant target() calls for unchanged limits cpufreq: Fix typo in comment cpufreq: intel_pstate: Sync policy->cur during CPU offline cpufreq: Documentation: fix sampling_down_factor range cpufreq: Fix hotplug-suspend race during reboot cpufreq: pcc: fix use-after-free and double free in _OSC evaluation ... |
||
|
|
8c83947c5d |
cpufreq: Use policy->min/max init as QoS request
Modify cpufreq_policy_init_qos() introduced previously to use policy->min/max set in the driver .init() callback as the initial values for the policy min/max frequency QoS requests, respectively, so long as they are different from 0 (which means that they have been updated by the driver). Update the documentation in accordance with that code change. This only affects the following drivers: - gx-suspmod (min) - cppc-cpufreq (min) - longrun (min/max) Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> [ rjw: Changelog rewrite ] Link: https://patch.msgid.link/20260528090913.2759118-5-pierre.gondois@arm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
db80ad776c |
cpufreq: Remove driver default policy->min/max init
Prior to commit |
||
|
|
743a3cddb1 |
cpufreq: Set default policy->min/max values for all drivers
Some drivers set policy->min/max in their .init() callback, but
cpufreq_set_policy() will ultimately override them through:
cpufreq_policy_online()
\-cpufreq_init_policy()
\-cpufreq_set_policy()
\-/* Set policy->min/max */
Thus the policy min/max values set by the drivers are only temporary.
There is an exception if CPUFREQ_NEED_INITIAL_FREQ_CHECK is set and
cpufreq_policy_online() calls __cpufreq_driver_target() which invokes
cpufreq_driver->target().
To prepare for a subsequent change that will remove all initialization
of policy->min/max in driver .init() callbacks if the min/max value is
equal to the corresponding cpuinfo.min/max_freq, set default
policy->min/max values in the core for all drivers.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
[ rjw: Edits of the new comment and changelog ]
Link: https://patch.msgid.link/20260528090913.2759118-3-pierre.gondois@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
|
70fa8a1860 |
cpufreq: Extract cpufreq_policy_init_qos() function
Extract the QoS-related logic from cpufreq_policy_online() to make that function shorter/simpler. The logic is placed in cpufreq_policy_init_qos() and is now executed right after the following calls: - cpufreq_driver->init() - cpufreq_table_validate_and_sort() This facilitats subsequent changes that will, in cpufreq_policy_init_qos(): - Set a default policy->min/max value for all policies. - Use the policy->min/max values set by drivers as initial request values for policy frequency QoS requests. No functional change. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com> [ rjw: Changelog edits ] Link: https://patch.msgid.link/20260528090913.2759118-2-pierre.gondois@arm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
6100a82e34 |
amd-pstate fixes for 7.1 (2026-06-02)
* Fix a kdoc issue * Fix an issue setting performance state in EPP mode introduced earlier in the cycle from new 7.1 content -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmofFnsTHHN1cGVybTFA a2VybmVsLm9yZwAKCRAtGSymJHcCdnUxEADH6N8YuF+NVJ+rx/v0YPouzeTPX9F9 UJ6MJgS2aIXpnWd3CmrH2CzhEu8/7oVW/5pRv6wMPdDM2NZnmazFwYZgRsRuW3uZ GrkCFO50sbBBZjt3p8qbiIa+qb3QHkC5+dDP8SHLK7H7UyVcL8bNeXMn1kItJYAk Dnckyrx2ZT9I2pWXUiL5H5IOUPXm3ncWT3B/k4NSI2HGoAONu41Nb91WMZnbMM50 r+kTejYF83c+HdxiUR70zwGHaeqenS4MibHsmeqU13MX2uqT5Mzj0W6b3f2tgsSo qE4/exiCufXNSJCsVNjUCZNY408SZ1MHow14T3aCWRsBb2ou1WNy9AYuteuC1bdM YoFHy2dcEFA0rg7hq6N5SeUGPhrZICCBk02VSDjXOQ82Dl5VXPEST7YmG5dvrll/ HSpcz0CFyD2swDRE4V5avzizJtLc0KtOKCdrqyVx3eh+5pKi5sOWhIM97ck/f7aV ZstHeYm//azficWslWc7orv9LwvgEg+FxInaEcS1/Oe0A3h5PqM/NNK33Fuiflio 8jW8NDNoHtAHOfmO98N3+Kl4/h0atvpPi8YfBUuLGgpQUabVM2flwPMmGW9du2JT b78kPNlmjaIC1DEW6KiGyTYVJJdEG4d+NUn5TlaSgkTJ362VJReWUevXkKat5dQQ fvFzOa0aSbSlmQ== =GCJw -----END PGP SIGNATURE----- Merge tag 'amd-pstate-v7.1-2026-06-02' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Pull amd-pstate fixes for 7.1 (2026-06-02) from Mario Limonciello: "* Fix a kdoc issue * Fix an issue setting performance state in EPP mode introduced earlier in the cycle from new 7.1 content" * tag 'amd-pstate-v7.1-2026-06-02' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate: Fix setting EPP in performance mode cpufreq/amd-pstate: drop stale @epp_cached kdoc |
||
|
|
11efcfc295 |
CPUFreq arm updates for 7.2
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das, and Imran Shaik). - Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur, Hans Zhang, Guangshuo Li, and Xueqin Luo). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmomWYMACgkQ0rkcPK6B EhypdRAAnIHddDVfbl8mqMSVENcQrMBAgdSw4Foh6DcOfP2Nxu9+KSPR3xbFbNsy AxHc8M/merdjsHcuvA/03D/BgCzcpI80mb70k0u88LDneH7KbWbRMZ4nHFVzBui1 CUV/LZ17q8RRlNCNKySAZAK+jGeLMh4KIGK15RCZn0hv+KsinFQkKyER7EgqZANA 7TydPpwoQZakTh+YDJb27l2Cls/JXWZABuQbNtJIo1/SRBGnNQVpn+bEaYxhdeta G5OJrBw3i6fV0xfOEGQfwRy9qGr308qFvJEqoIJs0A/uBcY47TsYEYu/XHZfI5+C k8froLZIuClrHNEn+rAzS5n0PJTrp+bKaYMKCT31dDeOEB5KRMU0e/2Cj20dbjrz HB/2qufhhwR3C8W5N3l8POWvJJFUVABDO6N8vgOkp2qQYPdZmxKviTMcgKOYe0CA Z4DszH6DlwT9etP4lS4gv5rt8JmIdxFxSOrL6tYT2wVbpkA63H8wXIlKnob8wm5K CrQvUhSoxPqoHcKRd6RCSeOBDguVcpos9vgp8I6Mzdh4dVNvZRkKerJIJq+SBffw /SQhuBeireFMmDxoXb2nbKbQ05CNP4LM3AK35CLwu3Gz3Hm1o4m+IuoCmyZJkKAM pXcPQCZ2Es60sfkDXKLNSepQ3ux7d++TFIt0FcviyYTXICWnVVk= =hVKd -----END PGP SIGNATURE----- Merge tag 'cpufreq-arm-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull CPUFreq Arm updates for 7.2 from Viresh Kumar: "- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das, and Imran Shaik). - Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur, Hans Zhang, Guangshuo Li, and Xueqin Luo)." * tag 'cpufreq-arm-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: ti: Add EPROBE_DEFER for K3 SoCs cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS cpufreq: cppc: mask Desired_Excursion when autonomous selection is enabled cpufreq: qcom-cpufreq-hw: Fix possible double free cpufreq: apple-soc: Use FIELD_MODIFY() cpufreq/amd-pstate: Use FIELD_MODIFY() cpufreq: qcom: Unify user-visible "Qualcomm" name |
||
|
|
b7a76f38ef |
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
On K3 SoCs, ti-cpufreq relies on k3-socinfo to register the SoC device before soc_device_match() can return valid revision information. If ti-cpufreq probes before k3-socinfo, soc_device_match() returns NULL, leading to incorrect CPU frequency scaling behavior. Add a needs_k3_socinfo flag to ti_cpufreq_soc_data (similar to the existing multi_regulator pattern) to defer probe when k3-socinfo hasn't registered the SoC device yet. Signed-off-by: Akashdeep Kaur <a-kaur@ti.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
4b5d3b8472 |
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
The Qualcomm Shikra cpufreq hardware is functionally identical to EPSS, but supports only up to 12 frequency lookup table (LUT) entries. When all 12 entries are populated, the existing repetitive LUT entry check may read beyond valid entries and expose incorrect frequencies. Hence, introduce shikra_epss_soc_data that reuses EPSS configuration with appropriate LUT entries limit. Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
5629eec1a2 |
cpufreq/amd-pstate: Fix setting EPP in performance mode
EPP 0 is the only supported value in the performance policy. commit |
||
|
|
f02504316b | Merge back earlier cpufreq material for 7.2 | ||
|
|
2c7c659336 |
Merge patch series "rust: device: Higher-Ranked Lifetime Types for device drivers"
Danilo Krummrich <dakr@kernel.org> says:
Currently, Rust device drivers access device resources such as PCI BAR mappings
and I/O memory regions through Devres<T>.
Devres::access() provides zero-overhead access by taking a &Device<Bound>
reference as proof that the device is still bound. Since a &Device<Bound> is
available in almost all contexts by design, Devres is mostly a type-system level
proof that the resource is valid, but it can also be used from scopes without
this guarantee through its try_access() accessor.
This works well in general, but has a few limitations:
- Every access to a device resource goes through Devres::access(), which
despite zero cost, adds boilerplate to every access site.
- Destructors do not receive a &Device<Bound>, so they must use try_access(),
which can fail. In practice the access succeeds if teardown ordering is
correct, but the type system can't express this, forcing drivers to handle a
failure path that should never be taken.
- Sharing a resource across components (e.g. passing a BAR to a sub-component)
requires Arc<Devres<T>>.
- Device references must be stored as ARef<Device> rather than plain &Device
borrows.
These limitations stem from the driver's bus device private data being 'static
-- the driver struct cannot borrow from the device reference it receives in
probe(), even though it structurally cannot outlive the device binding.
This series introduces Higher-Ranked Lifetime Types (HRT) for Rust device
drivers. An HRT is a type that is generic over a lifetime -- it does not have a
fixed lifetime, but can be instantiated with any lifetime chosen by the caller.
Bus driver traits use a Generic Associated Type (GAT) type Data<'bound> to
introduce the lifetime on the private data, rather than parameterizing the
Driver trait itself. This avoids a driver trait global lifetime and avoids the
need for ForLt for bus device private data, making the bus implementations much
simpler. ForLt is only needed for auxiliary registration data, where the
lifetime is not introduced by a trait callback but must be threaded through
Registration.
With HRT, driver structs carry a lifetime parameter tied to the device binding
scope -- the interval of a bus device being bound to a driver. Device resources
like pci::Bar<'bound> and IoMem<'bound> are handed out with this lifetime, so
the compiler enforces at build time that they do not escape the binding scope.
Before:
struct MyDriver {
pdev: ARef<pci::Device>,
bar: Devres<pci::Bar<BAR_SIZE>>,
}
let io = self.bar.access(dev)?;
io.read32(OFFSET);
After:
struct MyDriver<'bound> {
pdev: &'bound pci::Device,
bar: pci::Bar<'bound, BAR_SIZE>,
}
self.bar.read32(OFFSET);
Lifetime-parameterized device resources can be put into a Devres at any point
via Bar::into_devres() / IoMem::into_devres(), providing the exact same
semantics as before. This is useful for resources shared across subsystem
boundaries where revocation is needed.
This also synergizes with the upcoming self-referential initialization support
in pin-init, which allows one field of the driver struct to borrow another
during initialization without unsafe code.
The same pattern is applied to auxiliary device registration data as a first
example beyond bus device private data. Registration<F: ForLt> can hold
lifetime-parameterized data tied to the parent driver's binding scope. Since the
auxiliary bus guarantees that the parent remains bound while the auxiliary
device is registered, the registration data can safely borrow the parent's
device resources.
More generally, binding resource lifetimes to a registration scope applies to
every registration that is scoped to a driver binding -- auxiliary devices,
class devices, IRQ handlers, workqueues.
A follow-up series extends this to class device registrations, starting with
DRM, so that class device callbacks (IOCTLs, etc.) can safely access device
resources through the separate registration data bound to the registration's
lifetime without Devres indirection.
Thanks to Gary for coming up with the ForLt implementation; thanks to Alice for
the early discussions around lifetime-parameterized private data that helped
shape the direction of this work.
Link: https://patch.msgid.link/20260525202921.124698-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
||
|
|
81fdc78814 |
rust: platform: make Driver trait lifetime-parameterized
Add a 'bound lifetime to the associated Data, changing type Data to type Data<'bound>. This allows the driver's bus device private data to capture the device / driver bound lifetime; device resources can be stored directly by reference rather than requiring Devres. The probe() and unbind() callbacks thus gain a 'bound lifetime parameter on the methods themselves; avoiding a global lifetime on the trait impl. Existing drivers set type Data<'bound> = Self, preserving the current behavior. Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://patch.msgid.link/20260525202921.124698-14-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
|
24799831d6 |
rust: device: make Core and CoreInternal lifetime-parameterized
Device<Core> references in probe callbacks are scoped to the callback, not the full binding duration. Add a lifetime parameter to Core and CoreInternal to accurately represent this in the type system. Suggested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Eliot Courtney <ecourtney@nvidia.com> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://patch.msgid.link/20260525202921.124698-12-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
|
7fdffdda63 |
rust: driver: decouple driver private data from driver type
Add a type Data<'bound> associated type to all bus driver traits, decoupling the driver's bus device private data type from the driver struct itself. In the context of adding a 'bound lifetime, making this an associated type has the advantage that it allows us to avoid a driver trait global lifetime and it avoids the need for ForLt for bus device private data; both of which make the subsequent implementation by buses much simpler. All existing drivers and doc examples set type Data = Self to preserve the current behavior. Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20260525202921.124698-5-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
|
24fc587080 |
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
When ignore_nice_load is toggled from 0 to 1 via sysfs, dbs_update() may
run concurrently and observe the new tunable value while prev_cpu_nice
still holds a stale baseline, producing a spurious massive idle_time that
results in an incorrect CPU load value.
The race can be illustrated with two concurrent paths:
Path A (sysfs write, holds attr_set->update_lock):
governor_store()
mutex_lock(&attr_set->update_lock)
ignore_nice_load_store()
dbs_data->ignore_nice_load = 1 /* (A1) */
gov_update_cpu_data(dbs_data)
mutex_lock(&policy_dbs->update_mutex) /* (A2) */
j_cdbs->prev_cpu_nice = kcpustat_field(...)
mutex_unlock(&policy_dbs->update_mutex)
mutex_unlock(&attr_set->update_lock)
Path B (work queue, wins the race between A1 and A2):
dbs_work_handler()
mutex_lock(&policy_dbs->update_mutex) /* acquired before A2 */
dbs_update()
ignore_nice = dbs_data->ignore_nice_load /* sees new value: 1 */
cur_nice = kcpustat_field(...)
idle_time += div_u64(cur_nice - j_cdbs->prev_cpu_nice, ..) /* stale */
j_cdbs->prev_cpu_nice = cur_nice
mutex_unlock(&policy_dbs->update_mutex)
Fix this by unconditionally sampling cur_nice and advancing prev_cpu_nice
in dbs_update() on every call, regardless of ignore_nice. With
prev_cpu_nice always reflecting the most recent sample, enabling
ignore_nice_load can never produce a stale-baseline spike: the delta will
always be the nice time accumulated in the last sampling interval, not
since boot. The additional kcpustat_field() call per CPU per sample is
negligible given that the sampling path already reads idle and load
accounting.
To keep prev_cpu_nice handling consistent with the always-tracking
semantics introduced above:
- gov_update_cpu_data() unconditionally resets prev_cpu_nice alongside
prev_cpu_idle, so both baselines share the same timestamp when
io_is_busy changes. This prevents an interval mismatch between
idle_time and nice_delta on the next dbs_update() when
ignore_nice_load is enabled.
- cpufreq_dbs_governor_start() unconditionally initializes prev_cpu_nice
so the baseline is always valid from the first dbs_update() call;
remove the ignore_nice guard and the now-unused ignore_nice variable.
Fixes:
|
||
|
|
91f5d69847 |
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
gov_update_cpu_data() resets per-CPU prev_cpu_idle for every CPU in the
governed domain, and conditionally resets prev_cpu_nice when
ignore_nice_load is set. It is called from sysfs store callbacks
(e.g. ignore_nice_load_store) which run under attr_set->update_lock,
held by the surrounding governor_store().
Concurrently, dbs_work_handler() calls gov->gov_dbs_update() (which calls
dbs_update()) under policy_dbs->update_mutex. dbs_update() both reads and
writes the same prev_cpu_idle / prev_cpu_nice fields. The potential race
path is:
Path A (sysfs write, holds attr_set->update_lock only):
governor_store()
mutex_lock(&attr_set->update_lock)
ignore_nice_load_store()
dbs_data->ignore_nice_load = input
gov_update_cpu_data(dbs_data)
list_for_each_entry(policy_dbs, ...)
for_each_cpu(j, ...)
j_cdbs->prev_cpu_idle = get_cpu_idle_time(...) /* write */
j_cdbs->prev_cpu_nice = kcpustat_field(...) /* write */
mutex_unlock(&attr_set->update_lock)
Path B (work queue, holds policy_dbs->update_mutex only):
dbs_work_handler()
mutex_lock(&policy_dbs->update_mutex)
gov->gov_dbs_update(policy)
dbs_update()
for_each_cpu(j, policy->cpus)
idle_time = cur - j_cdbs->prev_cpu_idle /* read */
j_cdbs->prev_cpu_idle = cur_idle_time /* write */
idle_time += cur_nice - j_cdbs->prev_cpu_nice /* read */
j_cdbs->prev_cpu_nice = cur_nice /* write */
mutex_unlock(&policy_dbs->update_mutex)
Because attr_set->update_lock and policy_dbs->update_mutex are two
completely independent locks, the two paths are not mutually exclusive.
This results in a data race on cpu_dbs_info.prev_cpu_idle and
cpu_dbs_info.prev_cpu_nice.
Fix this by also acquiring policy_dbs->update_mutex in
gov_update_cpu_data() for each policy, so that path A participates in
the mutual exclusion already established by dbs_work_handler(). Also
update the function comment to accurately reflect the two-level locking
contract.
Additionally, cpufreq_dbs_governor_start() initializes prev_cpu_idle
using io_busy read from dbs_data->io_is_busy without holding
policy_dbs->update_mutex. A concurrent io_is_busy_store() can update
io_is_busy and call gov_update_cpu_data(), which writes prev_cpu_idle
with the new value under the mutex. cpufreq_dbs_governor_start() then
overwrites prev_cpu_idle with the stale io_busy value, leaving the
baseline inconsistent with the tunable. Fix this by reading io_busy
inside the mutex.
The root of this race dates back to the original ondemand/conservative
governors. Before commit
|
||
|
|
3cd07ee35a |
cpufreq/amd-pstate: drop stale @epp_cached kdoc
Commit |
||
|
|
df488cac61 |
cpufreq/amd-pstate-ut: Disable dynamic_epp after the mode switch
Dan reported a possible NULL pointer dereference in amd-pstate-ut.c from
static analysis and sure enough, running amd-pstate-ut in active mode
with amd_dynamic_epp=enable results in a crash as a reult of the policy
reference being set to NULL early, before disabling dynamic EPP.
Kalpana also reported seeing amd-pstate-ut error out with -EBUSY for
"amd_pstate_ut_epp" test when starting from the passive mode and
amd_dynamic_epp=enable in the command line. The reason for the failure
is that the command line enables dynamic_epp by default after the mode
switch and the modifications to EPP values are blocked when running in
dynamic EPP mode.
Solution to both problems is to toggle off dynamic_epp *after* the mode
switch when the driver grabs the policy reference again since the unit
test is in full control of the policy after that point.
The final restoration step will reset the dynamic_epp state via mode
switch based on the initial conditions of the system.
Reported-by: Kalpana Shetty <kalpana.shetty@amd.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-pm/ahEq0CvdBX0T7_cO@stanley.mountain/
Fixes:
|
||
|
|
08a859927e |
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
Improve warning message on HWP-disabled hybrid processors to state that intel_pstate requires HWP to be enabled on such processors [1]. Previously it warned that "intel_pstate: CPU model not supported", but it was misleading. Link: https://docs.kernel.org/admin-guide/pm/intel_pstate.html [1] Signed-off-by: Yohei Kojima <yohei.kojima@sony.com> [ rjw: Changelog tweaks ] Link: https://patch.msgid.link/87f69971a9bf89fb4b51f128e8ae519cbaf5894e.1779406085.git.yohei.kojima@sony.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
6fb302d210 |
cpufreq: elanfreq: Drop support for AMD Elan SC4*
Since commit
|
||
|
|
7dd383dc66 |
cpufreq: clean up dead dependencies on X86 in Kconfig
The Kconfig in the parent directory already has an 'if X86' condition wrapping the inclusion of this file, meaning that each of the individual 'depends on' statements in this file is a duplicate dependency (dead code). Leave the outer 'if X86...endif' and remove the individual 'depends on X86' statement from each option. This dead code was found by kconfirm, a static analysis tool for Kconfig. Signed-off-by: Julian Braha <julianbraha@gmail.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> [ rjw: Changelog edits ] Link: https://patch.msgid.link/20260417230652.305414-1-julianbraha@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
3494dff897 |
cpufreq: conservative: Simplify frequency limit handling
cs_dbs_update() performs explicit checks against policy->min/max before updating the target frequency. These checks are redundant as __cpufreq_driver_target() already clamps the requested frequency to the valid policy limits. Remove the unnecessary boundary checks and simplify the update logic. This also fixes an issue introduced by commit |
||
|
|
9801be8bef |
cpufreq: Avoid redundant target() calls for unchanged limits
Drivers setting CPUFREQ_NEED_UPDATE_LIMITS expect target() to be invoked even if the target frequency remains unchanged, so they can update their internal policy limits state. Currently the core invokes target() unconditionally whenever the requested frequency matches policy->cur for such drivers, even if policy->min and policy->max haven't changed since the previous update. Track pending policy limit updates explicitly and skip redundant target() invocations when neither the target frequency nor the effective limits changed. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Link: https://patch.msgid.link/d0107c364b709abca21acf88072220bc05478594.1779423281.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
bcbdaa1086 |
cpufreq: intel_pstate: Sync policy->cur during CPU offline
When a CPU goes offline with HWP disabled, intel_pstate_set_min_pstate()
sets the MSR_IA32_PERF_CTL to minimum frequency to prevent SMT siblings
from being restricted. However, the policy->cur value was not updated,
leaving it at the previous value.
When the CPU comes back online, governor->limits() checks if target_freq
equals policy->cur and skips the frequency adjustment if they match. Since
policy->cur still holds the previous value, the governor does not call
cpufreq_driver->target to update MSR_IA32_PERF_CTL.
Fix this by synchronizing policy->cur with the hardware state when setting
minimum pstate during CPU offline.
Fixes:
|
||
|
|
a9029dd556 |
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
Fixes:
|
||
|
|
266d3dd8b7 |
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the
two-phase _OSC negotiation. Between the two calls it freed
output.pointer but left output.length unchanged. Since
acpi_evaluate_object() treats a non-zero length with a non-NULL
pointer as an existing buffer to write into, the second call wrote
into freed memory (use-after-free). The subsequent kfree(output.pointer)
at out_free then freed the same pointer a second time (double free).
Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER
after freeing the first result, so ACPICA allocates a fresh buffer for
each phase independently.
Fixes:
|
||
|
|
a67f311333 |
amd-pstate fixes for 7.1 (05/14/2026)
A number of fixes to the dynamic epp feature which was new to kernel 7.1, including making it opt in only. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmoF0zkTHHN1cGVybTFA a2VybmVsLm9yZwAKCRAtGSymJHcCdtBKEACyCL9xIVkFeall/cac9FzX7BbRYN6T fW+2CLOep12rgtmBeAfC0yZ6pD173SVfhp71KzsrG0u00VgjGiO1+3BhE6dSFYOx aPNSi/iCT2CAR9oMRSQDngeE9H/Ou7KafPVAEIiBSHVLKTnX5rmxuAko9Qp6VfGM rE4L8BW6GwlDs9JDfs0QLafTHlM6VCOjWx5SxTN8eqY9wkfas/ahpb4V3OVny3v+ KiKU1720HQsynkiWWZK+IGOOubmo9o/mwdFQRVhnuxv3D0rrRe+PRR9DGgio+t3b lSt3VCP4NuvDMelNHr+T4QoGIWCpGP5LQbLUN+LVGjFOUM2Zo/GXm2prUejatnWw StmUVleRVzDfseXOfl30B6ImX4rC4f3d74lQ4pI/c7vDTRgSHJhLfYzNRuc324T5 XsSrWnqTK4vN/RWQED89DDqTnI4vWTaY5Z4h5kmbGzZa4dQ88d8ydHRxiq9u3Bcl mpqEvTgoYJCpT2Xv91OjcQ4vcRjmtpsB93FOyY6WBHwoadfBjXv4UAcuOpCxDt9N qlGeBrYZvv822aaTsRJBvEJj9bwpDrLcoJNLpeQN6EL/LY1YwxIPiGQHOIrlf0iJ 9ChLfR0gutkUBwW7djwubza8CSoNs4N5KsU4rRGjzaL3T2yy2tZB639HRw1ErRoL YWzf3jYNLYG2mw== =TNUP -----END PGP SIGNATURE----- Merge tag 'amd-pstate-v7.1-2026-05-14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux into pm-cpufreq-fixes Merge amd-pstate fixes for 7.1 (05/14/2026) from Mario Limonciello: "A number of fixes to the dynamic epp feature which was new to kernel 7.1, including making it opt in only." * tag 'amd-pstate-v7.1-2026-05-14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate: Drop Kconfig option for dynamic EPP cpufreq/amd-pstate-ut: Drop policy reference before driver switch cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name cpufreq/amd-pstate: Grab "amd_pstate_driver_lock" when toggling dynamic_epp |
||
|
|
9a303892ac |
cpufreq: cppc: mask Desired_Excursion when autonomous selection is enabled
According to the ACPI 6.6 specification, the Desired_Excursion field is not utilized when autonomous selection is enabled. In this mode, the bit is architecturally ignored and does not carry meaningful information. Currently, the kernel exposes the raw Performance Limited register value to userspace through the cpufreq sysfs interface. This may lead to misinterpretation, as userspace may assume Desired_Excursion is valid even when autonomous selection is active. To provide a stable and semantically correct ABI, mask out the Desired_Excursion bit when autonomous selection is enabled, so that userspace does not observe undefined or misleading values. Writes are left unchanged, as the field is architecturally ignored in this mode and write attempts are harmless. Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
e4e9b7b38d |
cpufreq/amd-pstate: Drop Kconfig option for dynamic EPP
There are some performance issues being identified by dynamic EPP and we don't want to have distributions turning it on by default exposing them to users at this time. Drop the kconfig option, and require an explicit opt in from kernel command line or runtime sysfs option to turn it on. Reported-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Closes: https://lore.kernel.org/linux-pm/14a87c99-785c-4b16-bfce-35ecbf053448@freenet.de/ Reported-by: Stuart Meckle <stuartmeckle@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221473 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260512221947.1652988-1-mario.limonciello@amd.com (fix sysfs file path) Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> |
||
|
|
85cffdb21b |
cpufreq: intel_pstate: Use HYBRID_SCALING_FACTOR_ADL for Bartlett Lake
Bartlett Lake P-core only SKUs (e.g. Intel Core 9 273PE)
do not report X86_FEATURE_HYBRID_CPU and are not in
intel_hybrid_scaling_factor[]. In hwp_get_cpu_scaling(), the
non-hybrid fallback then applies core_get_scaling() (100000),
producing cpuinfo_max_freq values that exceed the documented Max
Turbo Frequency:
intel_pstate: CPU0: PERF_CTL turbo = 57
intel_pstate: CPU0: HWP_CAP guaranteed = 30
intel_pstate: CPU0: HWP_CAP highest = 70
intel_pstate: CPU0: HWP-to-frequency scaling factor: 100000
intel_pstate: set_policy cpuinfo.max 7000000 policy->max 7000000
...
intel_pstate: CPU12: PERF_CTL turbo = 57
intel_pstate: CPU12: HWP_CAP guaranteed = 30
intel_pstate: CPU12: HWP_CAP highest = 73
intel_pstate: CPU12: HWP-to-frequency scaling factor: 100000
intel_pstate: set_policy cpuinfo.max 7300000 policy->max 7300000
...
Per the Intel datasheet [1], the Intel Core 9 273PE specifies:
Performance-cores: 12
Efficient-cores: 0
Max Turbo Frequency: 5.7 GHz
Intel Thermal Velocity Boost Frequency: 5.7 GHz
Intel Turbo Boost Max Technology 3.0 Frequency: 5.6 GHz
Performance-core Max Turbo Frequency: 5.4 GHz
Performance-core Base Frequency: 2.3 GHz
Bartlett Lake P-cores are Raptor Cove cores, per
commit
|
||
|
|
0e7c710478 |
cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E
Raptor Lake-E has the same processor ID as Raptor Lake-S, so there is
an entry in intel_hybrid_scaling_factor[] for it. It does not contain
E-cores though and hybrid_get_cpu_type() returns 0 for its P-cores, so
they get the default "core" scaling factor. However, the original
Raptor Lake scaling factor for P-cores still needs to be used for
mapping the HWP performance levels of the P-cores in Raptor Lake-E to
frequency, as though they were part of a real hybrid system.
To address this, update hwp_get_cpu_scaling() to return
hybrid_scaling_factor, which is the P-core scaling factor
retrieved from intel_hybrid_scaling_factor[], for all CPUs
that are not enumerated as E-cores.
Fixes:
|
||
|
|
f9f16835d4 |
cpufreq/amd-pstate-ut: Drop policy reference before driver switch
Recent changes to the EPP unit test tries to perform a driver switch
with a cpufreq_policy reference held when the driver is loaded into
anything but the active mode which leads to a circular dependency and
the unit test hanging indefinitely.
Drop the reference before driver switch and grab it back once the driver
mode is stabilized for the test.
The EPP writes are only possible with CPUFREQ_POLICY_POWERSAVE policy.
Temporarily switch the cpudata->policy (while holding the write end of
the policy->rwsem) to CPUFREQ_POLICY_POWERSAVE and restore the original
policy once tests are done. To ensure the final EPP is correct in case
the driver started with CPUFREQ_POLICY_PERFORMANCE, EPP performance is
tested last.
The __free() based cleanup for cpufreq_policy is lost in the process.
Reported-by: Kalpana Shetty <kalpana.shetty@amd.com>
Fixes:
|
||
|
|
caa822d312 |
cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled
If "dynamic_epp" is disabled, the driver initialization and the default
EPP selection from sysfs currently sets the EPP based on the power
supply state of the system at that time but there is no power supply
callbacks registered to toggle it when the power supply state changes.
This can lead to faster battery drain on platforms that start off while
being plugged to the wall but later move to battery power since the EPP
stays at AMD_CPPC_EPP_PERFORMANCE.
Use "epp_default_dc" as the default EPP selection when dynamic_epp is
disabled, restoring older behavior. On servers, this defaults to
AMD_CPPC_EPP_PERFORMANCE and on other platforms, it defaults to
AMD_CPPC_EPP_BALANCE_PERFORMANCE.
Fixes:
|
||
|
|
f3acf7ff11 |
cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset
An active power supply notifier can race with amd_pstate_epp_cpu_exit()
trying to reset the floor perf and can overwrite the floor perf set in
MSR_AMD_CPPC_REQ.
Unregister the notifier before setting the floor perf to prevent the
rare race.
Fixes:
|
||
|
|
c5eed6ddc7 |
cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified
Writing the current "dynamic_epp" state to sysfs fails with -EINVAL even
though the desired result was achieved. Allow writes to "dynamic_epp"
that does not modify the state.
Fixes:
|
||
|
|
87d2a8dec0 |
cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name
Failure to allocate profile name will return -EINVAL from
platform_profile_register() while in fact, it is a failure to allocate
memory for the profile_name string.
Return -ENOMEM when kasprintf() fails to allocate profile_name string.
Fixes:
|
||
|
|
9228169d2a |
cpufreq/amd-pstate: Grab "amd_pstate_driver_lock" when toggling dynamic_epp
Concurrently changing driver mode and dynamic_epp with:
echo passive > /sys/devices/system/cpu/amd_pstate/status&
echo disable > /sys/devices/system/cpu/amd_pstate/dynamic_epp&
hits the WARN_ON_ONCE() in static_key_disable_cpuslocked() and hangs the
system since both sysfs writes are trying to do
amd_pstate_change_driver_mode() without any synchronization.
Grab the "amd_pstate_driver_lock" mutex when modifying "dynamic_epp" to
prevent the two paths from racing with each other. Add a lockdep
assertion for "amd_pstate_driver_lock" in
amd_pstate_change_driver_mode() to formalize the dependency.
Since "cppc_mode" is stable under "amd_pstate_driver_lock", only reload
the driver when in "AMD_PSTATE_ACTIVE" mode and reject all writes when
in passive or guided mode, or if the driver is not loaded, since only
active mode operates on EPP.
Fixes:
|
||
|
|
bcb8889c49 |
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing.
Fixes:
|
||
|
|
88e8df5904 |
cpufreq: apple-soc: Use FIELD_MODIFY()
Use FIELD_MODIFY() to remove open-coded bit manipulation. No functional change intended. Signed-off-by: Hans Zhang <18255117159@163.com> Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
08a64b9bfc |
cpufreq/amd-pstate: Use FIELD_MODIFY()
Use FIELD_MODIFY() to remove open-coded bit manipulation. No functional change intended. Signed-off-by: Hans Zhang <18255117159@163.com> Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
58d0379d29 |
cpufreq: qcom: Unify user-visible "Qualcomm" name
Various names for Qualcomm as a company are used in user-visible config options. Switch to unified "Qualcomm" so it will be easier for users to identify the options when for example running menuconfig. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
e2d10998e4 |
Devicetree updates for v7.1:
DT core:
- Cleanup of the reserved memory code to keep CMA specifics in CMA code
- Add and convert several users to new of_machine_get_match() helper
- Validate nul termination in string properties
- Update dtc to upstream v1.7.2-69-g53373d135579
- Limit matching reserved memory devices to /reserved-memory nodes
- Fix some UAF in unittests
- Remove Baikal SoC bus driver
- Fix false DT_SPLIT_BINDING_PATCH checkpatch warning
- Allow fw_devlink device-tree on x86
- Fix kerneldoc return description for of_property_count_elems_of_size()
DT bindings:
- Add fsl,imx25-aips, fsl,imx25-tcq, qcom,eliza-pdc,
qcom,eliza-spmi-pmic-arb, qcom,hawi-imem, qcom,milos-imem,
qcom,hawi-pdc, and lg,sw49410 bindings
- Convert arm,vexpress-scc to DT schema
- Deprecate Qualcomm generic CPU compatibles. Add Apple M3 CPU cores.
- Move some dual-link display panels to the dual-link schema
- Drop mux controller node name constraints
- Remove Baikal SoC bus bindings
- Fix a false warning in the thermal trip node binding
-----BEGIN PGP SIGNATURE-----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=Ia0F
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Cleanup of the reserved memory code to keep CMA specifics in CMA
code
- Add and convert several users to new of_machine_get_match() helper
- Validate nul termination in string properties
- Update dtc to upstream v1.7.2-69-g53373d135579
- Limit matching reserved memory devices to /reserved-memory nodes
- Fix some UAF in unittests
- Remove Baikal SoC bus driver
- Fix false DT_SPLIT_BINDING_PATCH checkpatch warning
- Allow fw_devlink device-tree on x86
- Fix kerneldoc return description for of_property_count_elems_of_size()
DT bindings:
- Add fsl,imx25-aips, fsl,imx25-tcq, qcom,eliza-pdc,
qcom,eliza-spmi-pmic-arb, qcom,hawi-imem, qcom,milos-imem,
qcom,hawi-pdc, and lg,sw49410 bindings
- Convert arm,vexpress-scc to DT schema
- Deprecate Qualcomm generic CPU compatibles. Add Apple M3 CPU cores.
- Move some dual-link display panels to the dual-link schema
- Drop mux controller node name constraints
- Remove Baikal SoC bus bindings
- Fix a false warning in the thermal trip node binding"
* tag 'devicetree-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: display: panel: panel-simple: Add lg,sw49410 compatible
dt-bindings: display: ti, am65x-dss: Fix AM62L DSS reg and clock constraints
dt-bindings: display: simple: Move Innolux G156HCE-L01 panel to dual-link
dt-bindings: display: simple: Move AUO 21.5" FHD to dual-link
dt-bindings: thermal: Fix false warning with 'phandle' in trips nodes
of: unittest: fix use-after-free in testdrv_probe()
of: unittest: fix use-after-free in of_unittest_changeset()
dt-bindings: qcom,pdc: document the Hawi Power Domain Controller
dt-bindings: ARM: arm,vexpress-scc: convert to DT schema
drivers/of: fdt: validate flat DT string properties before string use
drivers/of: fdt: validate stdout-path properties before parsing them
dt-bindings: sram: Document qcom,hawi-imem compatible
dt-bindings: sram: Allow multiple-word prefixes to sram subnode
dt-bindings: sram: Document qcom,milos-imem
scripts/dtc: Update to upstream version v1.7.2-69-g53373d135579
of: property: Allow fw_devlink device-tree on x86
dt-bindings: arm: cpus: Add Apple M3 CPU core compatibles
dt-bindings: display: lt8912b: Drop redundant endpoint properties
dt-bindings: opp-v2: Fix example 3 CPU reg value
dt-bindings: connector: add pd-disable dependency
...
|
||
|
|
cb30bf881c |
tracing updates for v7.1:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during the
compile. Move the __printf() attribute around for when debugging is not
enabled the warning will go away.
- Remove redundant check for EVENT_FILE_FL_FREED in event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded.
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now with
eventfs, the READ_ONCE() isn't needed. Simplify the code a bit and also
add a warning to event_file_data() if the file or its data is not present.
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper functions,
which do not use file->private_data. Stop updating it on open.
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum, show the
name of the enum instead of its number.
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution will
just skip over it. When tracing is enabled, the nop is converted to a
direct jump to the tracepoint code. Sometimes more calculations are
required to be performed to update the parameters of the tracepoint. In
this case, trace_##name##_enabled() is called which is a static_branch()
that gets enabled only when the tracepoint is enabled. This allows the
extra calculations to also be skipped by the nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem with
this approach is that there's now two static_branch() calls. One for
checking if the tracepoint is enabled, and then again to know if the
tracepoint should be called. The second one is redundant.
Introduce trace_call__foo() that will call the foo() tracepoint directly
without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code out of
it and into a new trace_snapshot.c file.
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is now a
__cpumask() field definition. Update the field to use that.
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat().
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled respectively.
But on error, after the "reg" func is called and the tracepoint is not
enabled, the "unreg" function is not called to tear down what the "reg"
function performed.
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output.
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location.
- Some other simple cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeCpvxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt2WAP44m85BbAjBqJe4WR103eOXV+bREBta
dRoReKJOMe519gEAp0rK/HoCvHgHhIGe3gaGdIsNhnaxoFyNWMG/wokoLAY=
=Hg6+
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
||
|
|
d7c8087a9c |
Power management updates for 7.1-rc1
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq as
a preparation to upcoming EMC controller support (Svyatoslav Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options to
the cpupower-frequency-info man page, and add the perf-bias option to
the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY9TISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1G9gH/j5mEqfPpiwX6fQ/ZwOGdNOOPVA5w9j4
KPHSMwMD5lZkoaZfasp2vt27KY5SOoVVvRZ2DKkFJ3Jai4I3cUPZYypga2nre1ag
tgzX4vOjcw2r40Eda6ezWl1h4mca/xJJBX7xH2+hn1JY+Y1in37g50CqMIjKh96z
Uugkk6UZytL1XcF55PMhIUgDf6pDtRT5UOW9xOKOkUt8FVWTJ7ei3HaWyV5kDmVq
b5eQ42+OH7y6sWNnoKczFd8fStvh6J/avoJurBEvcOQhMcjaIaB48G19+KjDg73E
NjrVcgG20P2rltBvV2d0J1TKskZHkaP7XjIeWfkwjGZhee3FL7ssS/g=
=fRCO
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
|
||
|
|
bfb0315a2d |
Merge branches 'acpi-processor' and 'acpi-cppc'
Merge ACPI processor driver updates and ACPI CPPC library updates for 7.1-rc1: - Address multiple assorted issues and clean up the code in the ACPI processor idle driver (Huisong Li) - Replace strlcat() in the ACPI processor idle drive with a better alternative (Andy Shevchenko) - Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki) - Move reference performance to capabilities and fix an uninitialized variable in the ACPI CPPC library (Pengjie Zhang) - Add support for the Performance Limited Register to the ACPI CPPC library (Sumit Gupta) - Add cppc_get_perf() API to read performance controls, extend cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC library warn on missing mandatory DESIRED_PERF register (Sumit Gupta) - Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target callbacks to allow it to control performance bounds via standard scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs documentation for the Performance Limited Register to it (Sumit Gupta) * acpi-processor: ACPI: processor: idle: Reset cpuidle on C-state list changes cpuidle: Extract and export no-lock variants of cpuidle_unregister_device() ACPI: processor: idle: Fix NULL pointer dereference in hotplug path ACPI: processor: idle: Reset power_setup_done flag on initialization failure ACPI: processor: Rearrange and clean up acpi_processor_errata_piix4() ACPI: processor: idle: Replace strlcat() with better alternative ACPI: processor: idle: Remove redundant static variable and rename cstate check function ACPI: processor: idle: Move max_cstate update out of the loop ACPI: processor: idle: Remove redundant cstate check in acpi_processor_power_init ACPI: processor: idle: Add missing bounds check in flatten_lpi_states() * acpi-cppc: ACPI: CPPC: Check cpc_read() return values consistently ACPI: CPPC: Fix uninitialized ref variable in cppc_get_perf_caps() ACPI: CPPC: Move reference performance to capabilities cpufreq: CPPC: Add sysfs documentation for perf_limited ACPI: CPPC: add APIs and sysfs interface for perf_limited cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks cpufreq: CPPC: Update cached perf_ctrls on sysfs write ACPI: CPPC: Extend cppc_set_epp_perf() for FFH/SystemMemory ACPI: CPPC: Warn on missing mandatory DESIRED_PERF register ACPI: CPPC: Add cppc_get_perf() API to read performance controls |
||
|
|
6793439775 |
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
The dynamic EPP feature uses power_supply_reg_notifier() and
power_supply_unreg_notifier() but doesn't declare a dependency on
POWER_SUPPLY, causing linker errors when POWER_SUPPLY is not enabled.
Add POWER_SUPPLY to the selects.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Fixes:
|
||
|
|
d7d36c3a09 |
CPUFreq arm updates for 7.1
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa). - Update cpufreq-dt-platdev blocklist (Faruque Ansari). - Minor updates to driver and dt-bindings for Tegra (Thierry Reding and Rosen Penev). - Add MAINTAINERS entry for CPPC driver (Viresh Kumar). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmnTkToACgkQ0rkcPK6B Ehx9DA/9GBTg9Oo6MRBzfCcME+1Au2XyAB0BGPhwrybwvS4kB4Brz/kYjlwo1mSo +iqfh9NN2aiZHWLhQrsIT36/vMM3LG5OwuaxOWkqZP09u22MOmLoZuB2prbcpMR/ 6mJHOTntGOMvGZ2ckbcmdc82rxZng9JuRURjAk7gr97VS78PBhtmJNzo3FdPr7/t Ipz8IGgh9y81Vtm6R0q5J+vOggUb6K5oaICtLtCAH/Dc0MAGHv/l8jRGqyiyJC05 JHRZbgy10Cjk7bnKR0LRgWMYGfk4hj3Dm1CmHKejPq0ESUfQjaV5hBGpK2sKBXdR gk2RoWZvUO0GOYj8Bk9qsTx3b0YGfHOBKR3uGQHR7hx1HD5Z3wHP1z8q73Lle/KV hGTtCdH76vWIPoTe5Eq48eFSVIlnmmxiSOoQOHdPA8xIEG8WjWoTu4FD/ABWtcco iZAD3OEW4C2ZDDqnmWM0U56/bSXh66IyAlRM1WEEuzcdt58kHhBP8s+YBhLsEsw+ RzpplfwabikrinAPbxGCv1DQJZzw3xu5I+Qn4GqQfCWEhFJ2zLdA0whcmpPUj8xa g6YyD8/zHqLRzm1SP4+quStUa9s4Ve+GRYWM95HYr+3d0QhYmqOTeqmVEW5LtfSQ cVtc+5k1tp1miOu6uMCneQ/FQyTqe/MzSFkSqb9c2w3wlO2pzWU= =/Icr -----END PGP SIGNATURE----- Merge tag 'cpufreq-arm-updates-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull CPUFreq Arm updates for 7.1 from Viresh Kumar: "- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa). - Update cpufreq-dt-platdev blocklist (Faruque Ansari). - Minor updates to driver and dt-bindings for Tegra (Thierry Reding and Rosen Penev). - Add MAINTAINERS entry for CPPC driver (Viresh Kumar)." * tag 'cpufreq-arm-updates-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: tegra194: remove COMPILE_TEST cpufreq: Add QCS8300 to cpufreq-dt-platdev blocklist cpufreq: Add MAINTAINERS entry for CPPC driver cpufreq: tegra194: Rename Tegra239 to Tegra238 dt-bindings: arm: nvidia: Document the Tegra238 CCPLEX cluster dt-bindings: cpufreq: qcom-hw: document Eliza cpufreq hardware |
||
|
|
5cdfedf68e |
amd-pstate new content for 7.1 (2026-04-02)
Add support for new features:
* CPPC performance priority
* Dynamic EPP
* Raw EPP
* New unit tests for new features
Fixes for:
* PREEMPT_RT
* sysfs files being present when HW missing
* Broken/outdated documentation
-----BEGIN PGP SIGNATURE-----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=XTdh
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v7.1-2026-04-02' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Pull amd-pstate new content for 7.1 (2026-04-02) from Mario Limonciello:
"Add support for new features:
* CPPC performance priority
* Dynamic EPP
* Raw EPP
* New unit tests for new features
Fixes for:
* PREEMPT_RT
* sysfs files being present when HW missing
* Broken/outdated documentation"
* tag 'amd-pstate-v7.1-2026-04-02' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (22 commits)
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
amd-pstate: Make certain freq_attrs conditionally visible
...
|