The LED controller node is disabled because the leds-turris-omnia driver
does not support setting the LED blinking to be controlled by the MCU.
The patches for that have now been sent [1], so let's enable the node.
[1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The marvell PHY driver changes the LED[0] pin function to "On - 1000
Mbps Link, Off - Else".
Turris Omnia expects that the function is "On - Link, Blink - Activity,
Off - No link".
Use the `marvell,reg-init` DT property to change the function.
In the future, once netdev trigger will support HW offloading, we will
be able to have this configured via the combination of PHY driver and
leds-turris-omnia driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells"
properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
that it is documented within the BCMBCA Device Tree binding documents.
He updates the 47622 DTS to remove unnecessary PSCI properties, fix
the GIC nodes and some minor cosmetic changes. He finally adds support
for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26
Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing
whitespace between the property name and its value.
-----BEGIN PGP SIGNATURE-----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=h0fy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GDxE
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells"
properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
that it is documented within the BCMBCA Device Tree binding documents.
He updates the 47622 DTS to remove unnecessary PSCI properties, fix
the GIC nodes and some minor cosmetic changes. He finally adds support
for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26
Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing
whitespace between the property name and its value.
* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits)
ARM: dts: Add BCM63138 generic board dts
ARM: dts: update dts files for bcmbca SoC BCM63138
ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
dt-bindings: arm: add BCM63138 SoC
ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
ARM: dts: BCM5301X: Add DT for Meraki MR26
dt-bindings: ARM: add bindings for the Meraki MR26
dt-bindings: arm64: Add BCM6813 SoC
ARM: dts: Add DTS files for bcmbca SoC BCM63148
dt-bindings: arm: Add BCM63148 SoC
dt-bindings: arm64: Add BCM6856 SoC
dt-bindings: arm64: Add BCM63146 SoC
ARM: dts: broadcom: correct gpio-keys properties
ARM: dts: broadcom: align gpio-key node names with dtschema
ARM: dts: Add DTS files for bcmbca SoC BCM6756
dt-bindings: arm: Add BCM6756 SoC
...
Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.
The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.
It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.
SDX55 has it's debug UART interrupt level corrected.
Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.
-----BEGIN PGP SIGNATURE-----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=nI02
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gckS
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.20
This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.
The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.
It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.
SDX55 has it's debug UART interrupt level corrected.
Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.
* tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
ARM: dts: qcom: msm8974: rename GPU's OPP table node
ARM: dts: qcom: apq8064: disable DSI and DSI PHY by default
ARM: dts: qcom: apq8064: rename DSI PHY iface clock
ARM: dts: qcom: extend scm compatible to match dt-schema
ARM: dts: qcom: Fix sdhci node names - use 'mmc@'
ARM: dts: qcom: apq8064: drop phy-names from HDMI device node
ARM: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
ARM: dts: qcom: pm8841: add required thermal-sensor-cells
ARM: dts: qcom: msm8974: add required ranges to OCMEM
ARM: dts: qcom: sdx55: add dedicated IMEM and syscon compatibles
ARM: dts: qcom: msm8974: add dedicated IMEM compatible
ARM: dts: qcom: apq8064-asus-nexus7: add dedicated IMEM compatible
ARM: dts: qcom: use generic sram as name for imem and ocmem nodes
ARM: dts: qcom: ipq8064: add function to LED nodes
ARM: dts: qcom: ipq8064-rb3011: add color to LED node
ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodes
ARM: dts: qcom: apq8060-ifc6410: add color to LED node
ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodes
ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1
...
Link: https://lore.kernel.org/r/20220713032024.1372427-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains only the enablement of USB device port.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYs5sTwAKCRCejrg/N2X7
/dysAQCzEUcQ8LLXrWUEmezC6iaLIVRR/nxZFgjUFtlSXHdRTQEA6o8S5OrWApz3
zAUDnz0KYphbY0+XPyMONh63qX5H7Qo=
=2l52
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Z8D1
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #2
It contains only the enablement of USB device port.
* tag 'at91-dt-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: kswitch-d10: enable the USB device port
Link: https://lore.kernel.org/r/20220713070602.1652118-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Alexander Stein to fix some i.MX6UL dt_binding_check
warnings.
- Replace deprecated 'enable-sdio-wakeup' property with 'wakeup-source'
for a couple of boards.
- A set of imx7-colibri device tree updates from Marcel Ziswiler to
improve devices Display, Touch, Ethernet and SD/MMC, and also adds
Toradex Iris carrier board.
- A few improvements on imx6qdl-colibri board, correct SGTL5000 MCLK
handling, simplify handling of inverted PWM backlight.
- A series from Max Krummenacher (and Oleksandr Suvorov) to improve the
existing i.MX6 Apalis carrier board device trees and adds a new device
tree for the Ixora V1.2 carrier board.
- Add USB dual-role switching using extcon for imx7-colibri board.
- Add SFP node for TA 2.1 devices for LayerScape SoCs.
- Other small and random updates on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmLJMugUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6HTwf9EpFmI65t6eC8llTDK94Xx4dvwESq
TTx04A7XL36DgYAkGpL1l5KpcLGQGAo6Gfn1Nb6SxHfOL3Tqa3F/0FilR0h4sdGy
E6+OVzRJyoYTsL1l+tzcoLBAHMj/ai5gmTuTaQVypEz0Ai3JQnjR+p/v8xmAaPTE
crQy/ashAbOpBW09ZOw3T1osb9XqGDVCKHi6FxQS0vFNOC87olVGnOJedfaBwjpz
eMdXDWF8vbQ1mxIXzBBpSVU3htTVP6mZs4W4h0lQ22pHr6KuRRNPgjpB5s5m/Jjw
DTVTclhQBJGuY9FsrBRJKvTjlmQ513Wz57l0n11XZ0akSTT0TS9m3NuEdA==
=FZws
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9m0W
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.20:
- A series from Alexander Stein to fix some i.MX6UL dt_binding_check
warnings.
- Replace deprecated 'enable-sdio-wakeup' property with 'wakeup-source'
for a couple of boards.
- A set of imx7-colibri device tree updates from Marcel Ziswiler to
improve devices Display, Touch, Ethernet and SD/MMC, and also adds
Toradex Iris carrier board.
- A few improvements on imx6qdl-colibri board, correct SGTL5000 MCLK
handling, simplify handling of inverted PWM backlight.
- A series from Max Krummenacher (and Oleksandr Suvorov) to improve the
existing i.MX6 Apalis carrier board device trees and adds a new device
tree for the Ixora V1.2 carrier board.
- Add USB dual-role switching using extcon for imx7-colibri board.
- Add SFP node for TA 2.1 devices for LayerScape SoCs.
- Other small and random updates on various boards.
* tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (61 commits)
ARM: dts: layerscape: Add SFP node for TA 2.1 devices
ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3
ARM: dts: imx6q-bosch-acc: Replace 'enable-sdio-wakeup'
ARM: dts: imx7d-smegw01: Replace 'enable-sdio-wakeup'
ARM: dts: imx6q-apalis: Cleanup
ARM: dts: imx6q-apalis: backlight pwm: Adapt brightness steps
ARM: dts: imx6q-apalis: backlight pwm: Simplify inverted backlight
ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards
ARM: dts: imx6q-apalis: Clean-up sd card support
ARM: dts: imx6q-apalis: Add adv7280 video input
ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera
ARM: dts: imx6q-apalis: Disable stmpe touchscreen
ARM: dts: imx6q-apalis: Disable HDMI
ARM: dts: imx6q-apalis: Add LVDS panel support
ARM: dts: imx6q-apalis: move gpio-keys to SoM dtsi
ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsi
ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsi
ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsi
ARM: dts: imx6q-apalis: Command pmic to standby for poweroff
ARM: dts: imx6q-apalis: Add gpio-line-names
...
Link: https://lore.kernel.org/r/20220709082951.15123-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two minor fixes to help reduce the noise from the DT validation tooling.
-----BEGIN PGP SIGNATURE-----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=dXxp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Lh+F
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.20-rc1
Two minor fixes to help reduce the noise from the DT validation tooling.
* tag 'tegra-for-5.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Align gpio-keys node names with dtschema
ARM: tegra: Adjust whitespace around '='
Link: https://lore.kernel.org/r/20220708185608.676474-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use CONFIG_ARCH_BCMBCA to build all the BCMBCA SoC dts and remove
CONFIG_ARCH_BCM_63XX from the makefile
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Ethernet MAC and switch support for the RZ/N1 SoC on the RZN1D-DB
development board,
- AA1024XD12 panel overlay support for the Draak, Ebisu, and
Salvator-X(S) development boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYsfxkAAKCRCKwlD9ZEnx
cGKNAQC5Wl91yn3heD50V0vXjs6CqNm/bdrWOEmnwwlcnyClqQEAnQjTHs4iriar
110WP2JSNUoZwawygZFq0jHBgMVFOQA=
=LnAY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wgc5
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.20 (take two)
- Ethernet MAC and switch support for the RZ/N1 SoC on the RZN1D-DB
development board,
- AA1024XD12 panel overlay support for the Draak, Ebisu, and
Salvator-X(S) development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add panel overlay for Draak and Ebisu boards
arm64: dts: renesas: Add panel overlay for Salvator-X(S) boards
arm64: dts: renesas: Prepare AA1024XD12 panel .dtsi for overlay support
arm64: dts: renesas: spider-cpu: Fix scif0/scif3 sort order
ARM: dts: r9a06g032-rzn1d400-db: Add switch description
dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter
ARM: dts: r9a06g032: Describe switch
ARM: dts: r9a06g032: Describe GMAC2
ARM: dts: r9a06g032: Describe MII converter
arm64: dts: renesas: r9a07g054l2-smarc: Correct SoC name in comment
ARM: dts: renesas: Fix DA9063 watchdog subnode names
arm64: dts: renesas: r8a779m8: Drop operating points above 1.5 GHz
Link: https://lore.kernel.org/r/cover.1657278845.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Mitsubishi AA1024XD12 panel can be used for R-Car Gen2 and Gen3
boards as an optional external panel. It is described in the
arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi file as a direct child of the
DT root node. This allows including r8a77xx-aa104xd12-panel.dtsi in
board device trees, with other minor modifications, to enable the panel.
This is however not how external components should be modelled. Instead
of modifying the board device tree to enable the panel, it should be
compiled as a DT overlay, to be loaded by the boot loader.
Prepare the r8a77xx-aa104xd12-panel.dtsi file for this usage by
declaring a panel node only, without hardcoding its path. Overlay
sources can then include r8a77xx-aa104xd12-panel.dtsi where appropriate.
This change doesn't cause any regression as r8a77xx-aa104xd12-panel.dtsi
is currently unused. As overlay support for this panel has only been
tested with Gen3 hardware, and Gen2 support will require more
development, move the file to arch/arm64/boot/dts/renesas/.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Disable DSI and DSI PHY devices by default. The only actual user,
Nexus 7, already contains `status = "okay"` property in the respective
devices nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-5-dmitry.baryshkov@linaro.org
Follow the usual scheme and use name 'iface' rather than 'iface_clk' for
the interface clock. The DSI PHY driver can cope with both of them, so
there is no breakage.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-4-dmitry.baryshkov@linaro.org
First device specific compatible, then general one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626183247.142776-1-david@ixit.cz
It contains:
- compilation warning fixes for SAMA5D2
- updates for all AT91 device tree to use generic name for reset
controller
- reset controller node for SAMA7G5
- MCAN1 and UDPHS nodes for LAN966 SoCs
- Flexcom3 bindings were updated for lan966x-pcb8291.dts board to cope
with reality
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYsPyogAKCRCejrg/N2X7
/Uq7AQCAKfITIfmP9EY0JGuhJqBNNGckbCEkFLbixz6uj5TFNAEAxoJmmcL5cj9m
wUczRNYOD8wW7R1GoLOsHF95pwJvhgI=
=rxjU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=182f
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20
It contains:
- compilation warning fixes for SAMA5D2
- updates for all AT91 device tree to use generic name for reset
controller
- reset controller node for SAMA7G5
- MCAN1 and UDPHS nodes for LAN966 SoCs
- Flexcom3 bindings were updated for lan966x-pcb8291.dts board to cope
with reality
* tag 'at91-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: Add UDPHS support
dt-bindings: usb: atmel: Add Microchip LAN9662 compatible string
ARM: dts: lan966x: Cleanup flexcom3 usart pinctrl settings.
ARM: dts: lan966x: Add mcan1 node.
ARM: dts: at91: sama7g5: add reset-controller node
ARM: dts: at91: use generic name for reset controller
ARM: dts: at91: sama5d2: fix compilation warning
ARM: dts: at91: sama5d2: fix compilation warning
Link: https://lore.kernel.org/r/20220705084637.818216-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For the trip points, I used values from the BSP code.
The critical trip point value is 30°C above the maximum recommended
ambient temperature (85°C) for the SoC from the datasheet, so there's
some headroom even at such a high ambient temperature.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-4-qianfanguijin@163.com
OPP table value is get from allwinner lichee linux-3.10 kernel driver
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-3-qianfanguijin@163.com
The CPU of sun8i-r40 is powered by PMIC, let's add "cpu-supply" node.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-2-qianfanguijin@163.com
Add DT bindings for ST MIPID02 and DCMI to Avenger96 base DT.
Both the ST MIPID02 and DCMI are disabled by default, as the
AV96 camera module is optional.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for RCC pin, this is used on AV96 board
for e.g. sensor clock supply.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for DCMI pins, this is used on AV96 board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for UART5 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for UART4 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for UART3 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for SPI2 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for CAN1 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Those pin comments refer to SPI2 pins, not SPI1 pins, update the comments.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add UDPHS (the USB High Speed Device Port controller) support.
The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
IP. This IP is also the same as the one present in the SAMA5D3
SOC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704102845.168438-4-herve.codina@bootlin.com
Enables Reset and Clocks Controller on STM32MP13
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
According to the OSD32MP1 Power System overview[1] the EEPROM is connected to
the VDD line and not to some single-purpose fixed regulator.
Set the EEPROM supply according to the diagram to eliminate this parent-less
regulator.
[1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
