iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The header currently tests the VLAN core with an explicit pair of 'if
defined' checks:
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
Instead, use IS_ENABLED() which is the kernel way to test whether an
option is configured as builtin/module.
This is purely cosmetic – no functional changes.
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250616132626.1749331-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_VLAN_8021Q=n, a set of stub helpers are used, three of these
helpers use BUG() unconditionally.
This code should not be reached, as callers of these functions should
always check for is_vlan_dev() first, but the usage of BUG() is not
recommended, replace it with WARN_ON() instead.
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250616132626.1749331-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a stub implementation of is_vlan_dev() that returns false when
VLAN support is not compiled in (CONFIG_VLAN_8021Q=n).
This allows us to compile-out VLAN-dependent dead code when it is not
needed.
This also resolves the following compilation error when:
* CONFIG_VLAN_8021Q=n
* CONFIG_OBJTOOL=y
* CONFIG_OBJTOOL_WERROR=y
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: error: objtool: parse_mirred.isra.0+0x370: mlx5e_tc_act_vlan_add_push_action() missing __noreturn in .c/.h or NORETURN() in noreturns.h
The error occurs because objtool cannot determine that unreachable BUG()
(which doesn't return) calls in VLAN code paths are actually dead code
when VLAN support is disabled.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250616132626.1749331-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial fix to a couple of outdated netmem comments. No code changes,
just more accurately describing current code.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-3-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have removed the RFC3517/RFC6675 hints,
tcp_clear_retrans_hints_partial() is empty, and can be removed.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-4-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that obsolete RFC3517/RFC6675 TCP loss detection has been removed,
we can remove the somewhat complex and intrusive code to maintain its
hint state: lost_skb_hint and lost_cnt_hint.
This commit makes tcp_clear_retrans_hints_partial() empty. We will
remove tcp_clear_retrans_hints_partial() and its call sites in the
next commit.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-3-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Begunkov says:
====================
io_uring cmd for tx timestamps (part)
Apply the networking helpers for the io_uring timestamp API.
====================
Link: https://patch.msgid.link/cover.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shradha Gupta says:
====================
Allow dyn MSI-X vector allocation of MANA
In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.
The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.
The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.
The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.
The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.
The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.
* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
net: mana: Allocate MSI-X vectors dynamically
net: mana: Allow irq_setup() to skip cpus for affinity
net: mana: explain irq_setup() algorithm
PCI: hv: Allow dynamic MSI-X vector allocation
PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================
Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.
To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
For supporting dynamic MSI-X vector allocation by PCI controllers, enabling
the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN is not enough, msix_prepare_msi_desc()
to prepare the MSI descriptor is also needed.
Export pci_msix_prepare_desc() to allow PCI controllers to support dynamic
MSI-X vector allocation.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Remove now unused function phy_driver_is_genphy_10g().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/49b0589a-9604-4ee9-add5-28fbbbe2c2f3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new flag phydev->is_genphy_driven to simplify this function.
Note that this includes a minor functional change:
Now this function returns true if ANY of the genphy drivers
is bound to the PHY device.
We have only one user in DSA driver mt7530, and there the
functional change doesn't matter.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/c9ac3a7d-262a-425d-9153-97fe3ca6280a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to get rid of phy_driver_is_genphy() and
phy_driver_is_genphy_10g(), as first step add and use a flag
phydev->is_genphy_driven.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/3f3ad6dc-402e-4915-8d5a-2306b6d5562b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Number of RVU PFs on CN20K silicon have increased to 96 from maximum
of 32 that were supported on earlier silicons. Every RVU PF and VF is
identified by HW using a 16bit PF_FUNC value. Due to the change in
Max number of PFs in CN20K, the bit encoding of this PF_FUNC has changed.
This patch handles the change by using helper functions(using silicon
check) to use PF,VF masks and shifts to support both new silicon CN20K,
OcteonTx series. These helper functions are used in different modules.
Also moved the NIX AF register offset macros to other files which
will be posted in coming patches.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_print_options() from net/core/netpoll.c to
drivers/net/netconsole.c and make it static. This function is only used
by netconsole, so there's no need to export it or keep it in the public
netpoll API.
This reduces the netpoll API surface and improves code locality
by keeping netconsole-specific functionality within the netconsole
driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-4-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_parse_ip_addr() and netpoll_parse_options() from the generic
netpoll module to the netconsole module where they are actually used.
These functions were originally placed in netpoll but are only consumed by
netconsole. This refactoring improves code organization by:
- Removing unnecessary exported symbols from netpoll
- Making netpoll_parse_options() static (no longer needs global visibility)
- Reducing coupling between netpoll and netconsole modules
The functions remain functionally identical - this is purely a code
reorganization to better reflect their actual usage patterns. Here are
the changes:
1) Move both functions from netpoll to netconsole
2) Add static to netpoll_parse_options()
3) Removed the EXPORT_SYMBOL()
PS: This diff does not change the function format, so, it is easy to
review, but, checkpatch will not be happy. A follow-up patch will
address the current issues reported by checkpatch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-3-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move np_info(), np_err(), and np_notice() macros from internal
implementation to the public netpoll header file to make them
available for use by netpoll consumers.
These logging macros provide consistent formatting for netpoll-related
messages by automatically prefixing log output with the netpoll instance
name.
The goal is to use the exact same format that is being displayed today,
instead of creating something netconsole-specific.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-2-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 97714695ef ("net: netconsole: Defer netpoll cleanup to
avoid lock release during list traversal"), netconsole no longer uses
__netpoll_cleanup(). With no remaining users, remove this function
from the exported netpoll API.
The function remains available internally within netpoll for use by
netpoll_cleanup().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-1-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several of the tcp_ao events are only called when CONFIG_TCP_AO is
defined. As each event can take up to 5K regardless if they are used or
not, it's best not to define them when they are not used. Add #ifdef
around these events when they are not used.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612094616.4222daf0@batman.local.home
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phys_port_id_show, phys_port_name_show and phys_switch_id_show would
return -EOPNOTSUPP if the netdev didn't implement the corresponding
method.
There is no point in creating these files if they are unsupported.
Put these attributes in netdev_phys_group and implement the is_visible
method. make phys_(port_id, port_name, switch_id) invisible if the netdev
dosen't implement the corresponding method.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612142707.4644-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new callback operations for a dpll device:
- phase_offset_monitor_get(..) - to obtain current state of phase offset
monitor feature from dpll device,
- phase_offset_monitor_set(..) - to allow feature configuration.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks.
Execute the set callback upon user requests.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add enum dpll_feature_state for control over features.
Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the rgmii_clock() documentation to indicate that it can also
be used for MII, GMII and RMII modes as well as RGMII as the required
clock rates are identical, but note that it won't error out for 1G
speeds for MII and RMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPjjk-0049pI-MD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The field is spelled "message_priprity" in the big-endian bit-field
definition. Nothing in-tree currently references the member, so the
typo does not break kernel builds, but it is clearly incorrect.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://patch.msgid.link/20250612145012.185321-1-rubenkelevra@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify the arguments passed to phy_get_internal_delay() - the "dev"
argument is always &phydev->mdio.dev, and as the phydev is passed in,
there's no need to also pass in the struct device, especially when this
function is the only reason for the caller to have a local "dev"
variable.
Remove the redundant "dev" argument, and update the callers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPLwB-003VzR-4C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genphy_c45_read_status() is exported, so we can move definition of
genphy_c45_driver to phy_device.c and make it static. This helps
to clean up phy.h a little.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ead3ab17-22d0-4cd3-901c-3d493ab851e6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make mdio_device_bus_match() the default match function for non-PHY
MDIO devices. Benefit is that we don't have to export this function
any longer. As long as mdiodev->modalias isn't set, there's no change
in behavior. mdiobus_create_device() is the only place where
mdiodev->modalias gets set, but this function sets
mdio_device_bus_match() as match function anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/6c94e3d3-bfb0-4ddc-a518-6fddbc64e1d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mux multiple calls to the drivers via the .get_nfc and .set_nfc
callbacks. This is slightly inconvenient to the drivers as they
have to de-mux them back. It will also be awkward for netlink code
to construct struct ethtool_rxnfc when it wants to get info about
RX Flow Hash, from the RSS module.
Add dedicated driver callbacks. Create struct ethtool_rxfh_fields
which contains only data relevant to RXFH. Maintain the names of
the fields to avoid having to heavily modify the drivers.
For now support both callbacks, once all drivers are converted
ethtool_*et_rxfh_fields() will stop using the rxnfc callbacks.
Link: https://patch.msgid.link/20250611145949.2674086-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RX Flow Hashing supports using different configuration for different
RSS contexts. Only two drivers seem to support it. Make sure we
uniformly error out for drivers which don't.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid
routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient
packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0mtm
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
-----BEGIN PGP SIGNATURE-----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=dulg
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix sparse errors
Bluetooth: ISO: Fix not using bc_sid as advertisement SID
Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================
Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fbnic driver reports up-to 11 ranges resulting in the drop of the
last range. This patch increment the value of ETHTOOL_RMON_HIST_MAX to
address this limitation.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250610171109.1481229-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmhH/swTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnONCCACa16bTW53gBzmiTxdEgUJ/h+gQuR8G
Fj+yOYIWNZY/YOExa40ldApu3iB9UAB0D+FOly4Wv5zYDct6yNBxqtZjbkTFMaoi
3i+SSrRLNtIxgGs1KgJKVPis8mhCqiBL0aGoJDGyRiye6hotECDyQWvlGM3lMGUr
wdMDQW2xyKOWvm++jXijkUMyKThmI7czlSH8al+JU9KcAO9hiUlGzejdI56KUIMW
TRlg2QSK9CfIzgUP4RQughbF59/8Xbq3LOidu50xMad2wiOJj0IUHB0h6LoAshnS
jFy4Ox4Gw5hcmdaEKazjYEtq3nQeZ6wct7jThw02e4D9h0ac2MCVhphk
=Pt9d
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-10
The first 4 patches are by Vincent Mailhol and prepare the CAN netlink
interface for the introduction of CAN XL configuration.
Geert Uytterhoeven's patch updates the CAN networking documentation.
The last 2 patched are by Davide Caratti and introduce skb drop
reasons in the receive path of several CAN protocols.
* tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add drop reasons in CAN protocols receive path
can: add drop reasons in the receive path of AF_CAN
documentation: networking: can: Document alloc_candev_mqs()
can: netlink: can_changelink(): rename tdc_mask into fd_tdc_flag_provided
can: bittiming: rename can_tdc_is_enabled() into can_fd_tdc_is_enabled()
can: bittiming: rename CAN_CTRLMODE_TDC_MASK into CAN_CTRLMODE_FD_TDC_MASK
can: netlink: replace tabulation by space in assignment
====================
Link: https://patch.msgid.link/20250610094933.1593081-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function, netif_subqueue_sent, which is a wrapper for
netdev_tx_sent_queue.
Drivers that use the subqueue variant macros, netif_subqueue_xxx,
identify queue by index and are not required to obtain
struct netdev_queue explicitly.
Such drivers still need to call netdev_tx_sent_queue which is a
counterpart of netif_subqueue_completed_wake. Allowing drivers to use a
subqueue variant for this purpose improves their code consistency by
always referring to queue by its index.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/909a5c92db49cad39f0954d6cb86775e6480ef4c.1749038081.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-09 (ice, i40e, ixgbe, iavf)
Jake moves from individual virtchnl RSS configuration values, for ice,
i40e, and iavf, to a common libie location and values.
Martyna and Dawid add counters for link_down_events to ice, i40e, and
ixgbe drivers. The counter increments only on actual physical link-down
events visible to the PHY. It does not increment when the user performs
a software-only interface down/up (e.g. ip link set dev down).
The counter does increment in cases where the interface is reinitialized
in a way that causes a real link drop - such as eg. when attaching
an XDP program, reconfiguring channels, or toggling certain priv-flags.
For ice:
Arkadiusz and Karol separate PTP and DPLL functionality to their
respective APIs.
Michal adds a separate handler for Flow Director command processing.
For iavf:
Ahmed converts driver to utilize core's IRQ affinity API.
For ixgbe:
Alok Tiwari fixes issues with some comments; typos, copy/paste errors,
etc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbe: Fix typos and clarify comments in X550 driver code
iavf: convert to NAPI IRQ affinity API
ice: add a separate Rx handler for flow director commands
ice: add ice driver PTP pin documentation
ice: change SMA pins to SDP in PTP API
ice: redesign dpll sma/u.fl pins control
ixgbe: add link_down_events statistic
i40e: add link_down_events statistic
ice: add link_down_events statistic
net: intel: move RSS packet classifier types to libie
net: intel: rename 'hena' to 'hashcfg' for clarity
====================
Link: https://patch.msgid.link/20250609212652.1138933-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function was introduced in commit 783da70e83 ("net: add
sock_enable_timestamps"), with one caller in rxrpc.
That only caller was removed in commit 7903d4438b ("rxrpc: Don't use
received skbuff timestamps").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250609153254.3504909-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A decade ago commit 6d08acd2d3 ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde2 ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
Link: https://patch.msgid.link/20250609143933.1654417-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.
These counters include:
- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters
The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Besides the existing pr_warn_once(), use skb drop reasons in case AF_CAN
layer drops non-conformant CAN{,FD,XL} frames, or conformant frames
received by "wrong" devices, so that it's possible to debug (and count)
such events using existing tracepoints:
| # perf record -e skb:kfree_skb -aR -- ./drv/canfdtest -v -g -l 1 vcan0
| # perf script
| [...]
| canfdtest 1123 [000] 3893.271264: skb:kfree_skb: skbaddr=0xffff975703c9f700 rx_sk=(nil) protocol=12 location=can_rcv+0x4b reason: CAN_RX_INVALID_FRAME
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250604160605.1005704-2-dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With the introduction of CAN XL, a new can_xl_tdc_is_enabled() helper
function will be introduced later on. Rename can_tdc_is_enabled() into
can_fd_tdc_is_enabled() to make it more explicit that this helper is
meant for CAN FD.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241112165118.586613-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With the introduction of CAN XL, a new CAN_CTRLMODE_XL_TDC_MASK will
be introduced later on. Because CAN_CTRLMODE_TDC_MASK is not part of
the uapi, rename it to CAN_CTRLMODE_FD_TDC_MASK to make it more
explicit that this mask is meant for CAN FD.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241112165118.586613-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
