Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the improved variant of pinctrl_gpio_can_use_line() which takes a
pointer to the gpio_chip and a controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Currently the pinctrl GPIO helpers all take a number from the global
GPIO numberspace - of which we're trying to get rid of as argument.
These helpers are almost universally called from GPIOLIB driver
callbacks which take a pointer to the backing gpio_chip and the
controller-relative offset as arguments.
Let's provide improved variants of these functions that match the
GPIOLIB signatures as the first step in removing the older flavor.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The 'extern' specifiers are not needed for function declarations. Remove
all of them from the pinctrl/consumer.h header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With all users of gpiochip_find() converted to using gpio_device_find(),
we can now remove this function from the kernel.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
New drivers:
- Realtek RTD family pin control driver and RTD1619B,
RTD1319D and RTD1315E subdrivers.
- Nuvoton NPCM8xx combined pin control and GPIO driver.
- Amlogic T7 pin control driver.
- Renesas RZ/G3S pin control driver.
Improvements:
- A number of additional UART groups added to the Mediatek
MT7981 driver.
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125
and SDM660.
- Extra GPIO banks for the Sunxi H616.
- MLSP I2C6 function support in Qualcomm MSM8226.
- Some __counted_by() annotations for dynamic arrays.
- Ongoing work to make remove() return void.
- LSBC groups and functions in the Renesas R8A7778.
-----BEGIN PGP SIGNATURE-----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=vonG
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No pin control core changes this time.
New drivers:
- Realtek RTD family pin control driver and RTD1619B, RTD1319D and
RTD1315E subdrivers
- Nuvoton NPCM8xx combined pin control and GPIO driver
- Amlogic T7 pin control driver
- Renesas RZ/G3S pin control driver
Improvements:
- A number of additional UART groups added to the Mediatek MT7981
driver
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660
- Extra GPIO banks for the Sunxi H616
- MLSP I2C6 function support in Qualcomm MSM8226
- Some __counted_by() annotations for dynamic arrays
- Ongoing work to make remove() return void
- LSBC groups and functions in the Renesas R8A7778"
* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: Use device_get_match_data()
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
pinctrl: renesas: rzn1: Convert to platform remove callback returning void
pinctrl: renesas: rzg2l: Add RZ/G3S support
dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
pinctrl: renesas: rzg2l: Add support for different DS values on different groups
pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
pinctrl: renesas: rzg2l: Index all registers based on port offset
pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
pinctrl: intel: fetch community only when we need it
pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
pinctrl: cherryview: Convert to platform remove callback returning void
pinctrl: sprd-sc9860: Convert to platform remove callback returning void
pinctrl: qcom/msm: Convert to platform remove callback returning void
pinctrl: qcom/lpi: Convert to platform remove callback returning void
...
- Core has now improved handling of errors for clock stop
- Support for qcom v2.0.0 status registers and command ignored interrupt
and more logging for failures
- DMI quirk for HP Omen machine
-----BEGIN PGP SIGNATURE-----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=28ZO
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core now has improved handling of errors for clock stop
- Support for qcom v2.0.0 status registers and command ignored
interrupt and more logging for failures
- DMI quirk for HP Omen machine
* tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: update HP Omen match
soundwire: bus: improve error handling for clock stop prepare/deprepare
soundwire: qcom: Log clk_get("iface") failures
soundwire: qcom: handle command ignored interrupt
soundwire: qcom: use newer link status tregister on v2.0.0
Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for new
hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi,
and i2c drivers for that type of device (all acked by the respective
subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems, EXCEPT for some merge conflicts that you will run
into in your tree. 2 of them are in device-tree files, which will be
trivial to resolve (accept both sides), and the last in the
drivers/gpio/gpio-ljca.c file, in the remove callback, resolution should
be pretty trivial (take the version in this branch), see here:
https://lore.kernel.org/all/20231016134159.11d8f849@canb.auug.org.au/
for details, or I can provide a resolved merge point if needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUStew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxgQCggUyfGo+JVV8XZVu5A9KwT6nr7mUAmwUgFxhZ
khK77t0KqF4hjXryeaHa
=iPd+
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5
LTtw9sbfGIiBdOTtgLPb
=6PJr
-----END PGP SIGNATURE-----
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
Here is the big set of staging driver updates for 6.7-rc1. A bit bigger
than 6.6 this time around, as it coincided with the Outreachy and
mentorship application process, so we got a bunch of new developers
sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the rtl8192u
wireless driver. Both of these were very old and no one was maintaining
them, the wireless driver removal was due to no one using it anymore,
and no hardware to be found, and is part of a larger effort to remove
unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was dropped,
and we are working with the network mainainers to figure out what tree
it will come back in from and who will be responsible for it, and if it
really is being used or not. Odds are it will show up in a network
subsystem pull request after -rc1 is out, but we aren't sure yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches it.)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTg9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymL+QCg2YS9Mbr7W6zNAdRTbDybzp08ZzUAnRHQXUfB
WbZERHQpNOSTE3HwuW1D
=tZpl
-----END PGP SIGNATURE-----
Merge tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.7-rc1. A bit
bigger than 6.6 this time around, as it coincided with the Outreachy
and mentorship application process, so we got a bunch of new
developers sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the
rtl8192u wireless driver. Both of these were very old and no one was
maintaining them, the wireless driver removal was due to no one using
it anymore, and no hardware to be found, and is part of a larger
effort to remove unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was
dropped, and we are working with the network mainainers to figure out
what tree it will come back in from and who will be responsible for
it, and if it really is being used or not. Odds are it will show up in
a network subsystem pull request after -rc1 is out, but we aren't sure
yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and
structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches
it.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
staging: vt6655: Type encoding info dropped from variable name "byRxRate"
staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
staging: vt6655: Type encoding info dropped from variable name "byPacketType"
staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
staging: fbtft: Convert to platform remove callback returning void
staging: olpc_dcon: Remove I2C_CLASS_DDC support
staging: vc04_services: use snprintf instead of sprintf
staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
...
Here is the set of driver core updates for 6.7-rc1. Nothing major in
here at all, just a small number of changes including:
- minor cleanups and updates from Andy Shevchenko
- __counted_by addition
- firmware_loader update for aborting loads cleaner
- other minor changes, details in the shortlog
- documentation update
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTe8A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynP0QCfT2jQx3OcL22MoqCvdTuZJKPiHSIAoMxrliJF
d4cUeICW17ywlTFzsKg8
=nTeu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core updates for 6.7-rc1. Nothing major in
here at all, just a small number of changes including:
- minor cleanups and updates from Andy Shevchenko
- __counted_by addition
- firmware_loader update for aborting loads cleaner
- other minor changes, details in the shortlog
- documentation update
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
firmware_loader: Abort all upcoming firmware load request once reboot triggered
firmware_loader: Refactor kill_pending_fw_fallback_reqs()
Documentation: security-bugs.rst: linux-distros relaxed their rules
driver core: Release all resources during unbind before updating device links
driver core: class: remove boilerplate code
driver core: platform: Annotate struct irq_affinity_devres with __counted_by
resource: Constify resource crosscheck APIs
resource: Unify next_resource() and next_resource_skip_children()
resource: Reuse for_each_resource() macro
PCI: Implement custom llseek for sysfs resource entries
kernfs: sysfs: support custom llseek method for sysfs entries
debugfs: Fix __rcu type comparison warning
device property: Replace custom implementation of COUNT_ARGS()
drivers: base: test: Make property entry API test modular
driver core: Add missing parameter description to __fwnode_link_add()
device property: Clarify usage scope of some struct fwnode_handle members
devres: rename the first parameter of devm_add_action(_or_reset)
driver core: platform: Unify the firmware node type check
driver core: platform: Use temporary variable in platform_device_add()
driver core: platform: Refactor error path in a couple places
...
Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTSzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3QCfbZuG8MiglEZUd4slRLUNqcRQ5tQAn1yKpDFo
l3KLkxo1UTLMXbJBWe+b
=gafK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
IBI shall be handled in order they appear on the bus. Otherwise could hit
case when order of handling them in device driver will be different. It may
lead to invalid assembling fragmented packets or events order broken.
Added separate workqueue with option WQ_MEM_RECLAIM for each device driver.
This ensures IBI handling order and improves IBI handling performance: IBI
handlers for device B are not blocked by IBI handlers for device A.
Original solution (single workqueue in main driver) was able to handle also
general IBI (not related to specific device) like HJ or MR. So leaving this
for such purposes.
Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231015222334.1652401-2-zbigniew.lukwinski@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Now that we converted cephfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_atomic_open() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to 5fadbd9929 ("ceph: rely on vfs for
setgid stripping") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_set_acl() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable __ceph_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to b27c82e129 ("attr: port attribute
changes to new types") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just pass down the mount's idmapping to __ceph_setattr,
because we will need it later.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable mknod/symlink/mkdir iops to handle idmapped mounts.
This is just a matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This parameter is used to decide if we allow
to perform IO on idmapped mount in case when MDS lacks
support of CEPHFS_FEATURE_HAS_OWNER_UIDGID feature.
In this case we can't properly handle MDS permission
checks and if UID/GID-based restrictions are enabled
on the MDS side then IO requests which go through an
idmapped mount may fail with -EACCESS/-EPERM.
Fortunately, for most of users it's not a case and
everything should work fine. But we put work "unsafe"
in the module parameter name to warn users about
possible problems with this feature and encourage
update of cephfs MDS.
Suggested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Inode operations that create a new filesystem object such as ->mknod,
->create, ->mkdir() and others don't take a {g,u}id argument explicitly.
Instead the caller's fs{g,u}id is used for the {g,u}id of the new
filesystem object.
In order to ensure that the correct {g,u}id is used map the caller's
fs{g,u}id for creation requests. This doesn't require complex changes.
It suffices to pass in the relevant idmapping recorded in the request
message. If this request message was triggered from an inode operation
that creates filesystem objects it will have passed down the relevant
idmaping. If this is a request message that was triggered from an inode
operation that doens't need to take idmappings into account the initial
idmapping is passed down which is an identity mapping.
This change uses a new cephfs protocol extension CEPHFS_FEATURE_HAS_OWNER_UIDGID
which adds two new fields (owner_{u,g}id) to the request head structure.
So, we need to ensure that MDS supports it otherwise we need to fail
any IO that comes through an idmapped mount because we can't process it
in a proper way. MDS server without such an extension will use caller_{u,g}id
fields to set a new inode owner UID/GID which is incorrect because caller_{u,g}id
values are unmapped. At the same time we can't map these fields with an
idmapping as it can break UID/GID-based permission checks logic on the
MDS side. This problem was described with a lot of details at [1], [2].
[1] https://lore.kernel.org/lkml/CAEivzxfw1fHO2TFA4dx3u23ZKK6Q+EThfzuibrhA3RKM=ZOYLg@mail.gmail.com/
[2] https://lore.kernel.org/all/20220104140414.155198-3-brauner@kernel.org/
Link: https://github.com/ceph/ceph/pull/52575
Link: https://tracker.ceph.com/issues/62217
Co-Developed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When sending a mds request cephfs will send relevant data for the
requested operation. For creation requests the caller's fs{g,u}id is
used to set the ownership of the newly created filesystem object. For
setattr requests the caller can pass in arbitrary {g,u}id values to
which the relevant filesystem object is supposed to be changed.
If the caller is performing the relevant operation via an idmapped mount
cephfs simply needs to take the idmapping into account when it sends the
relevant mds request.
In order to support idmapped mounts for cephfs we stash the idmapping
whenever they are relevant for the operation for the duration of the
request. Since mds requests can be queued and performed asynchronously
we make sure to keep the idmapping around and release it once the
request has finished.
In follow-up patches we will use this to send correct ownership
information over the wire. This patch just adds the basic infrastructure
to keep the idmapping around. The actual conversion patches are all
fairly minimal.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
These helpers are required to support idmapped mounts in CephFS.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The mdsmap.h is only used by CephFS, so move it to fs/ceph.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
