We can replace &elf->sechdrs[i] with &sechdrs[i] to slightly shorten
the code because we already have the local variable 'sechdrs'.
However, defining 'sechdr' instead shortens the code further.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The current TO_NATIVE() has some limitations:
1) You cannot cast the argument.
2) You cannot pass a variable marked as 'const'.
3) Passing an array is a bug, but it is not detected.
Impelement TO_NATIVE() using bswap_*() functions. These are GNU
extensions. If we face portability issues, we can port the code from
include/uapi/linux/swab.h.
With this change, get_rel_type_and_sym() can be simplified by casting
the arguments directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
The generation of the kernel-devel package is disabled for binrpm-pkg
presumably because it was quite big (>= 200MB) and took a long time to
package.
Commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and
linux-headers Deb package") reduced the package size to 12MB, and now
it is quick to build. It won't hurt to have binrpm-pkg generate it by
default.
If you want to skip the kernel-devel package generation, you can pass
RPMOPTS='--without devel':
$ make binrpm-pkg RPMOPTS='--without devel'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is a follow-up to the commit 9b2b86332a ("bpf: Allow to use kfunc
XDP hints and frags together").
The are some possible implementations problems that may arise when providing
metadata specifically for multi-buffer packets, therefore there must be a
possibility to test such option separately.
Add an option to use multi-buffer AF_XDP xdp_hw_metadata and mark used XDP
program as capable to use frags.
As for now, xdp_hw_metadata accepts no options, so add simple option
parsing logic and a help message.
For quick reference, also add an ingress packet generation command to the
help message. The command comes from [0].
Example of output for multi-buffer packet:
xsk_ring_cons__peek: 1
0xead018: rx_desc[15]->addr=10000000000f000 addr=f100 comp_addr=f000
rx_hash: 0x5789FCBB with RSS type:0x29
rx_timestamp: 1696856851535324697 (sec:1696856851.5353)
XDP RX-time: 1696856843158256391 (sec:1696856843.1583)
delta sec:-8.3771 (-8377068.306 usec)
AF_XDP time: 1696856843158413078 (sec:1696856843.1584)
delta sec:0.0002 (156.687 usec)
0xead018: complete idx=23 addr=f000
xsk_ring_cons__peek: 1
0xead018: rx_desc[16]->addr=100000000008000 addr=8100 comp_addr=8000
0xead018: complete idx=24 addr=8000
xsk_ring_cons__peek: 1
0xead018: rx_desc[17]->addr=100000000009000 addr=9100 comp_addr=9000 EoP
0xead018: complete idx=25 addr=9000
Metadata is printed for the first packet only.
[0] https://lore.kernel.org/all/20230119221536.3349901-18-sdf@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231017162800.24080-1-larysa.zaremba@intel.com
kzalloc() gives us a zeroed memory, no need to explicitly assing 0 or
NULL or similar to the members of the data structure that has been
allocated with the above mentioned API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016133135.1203643-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert hard to read custom code to list_for_each().
No functional changes intended.
Note, we may not use list_for_each_entry() as at the end of the list
the iterator will point to an invalid entry and may not be dereferenced.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016133135.1203643-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve readability and maintainability by replacing a hardcoded string
allocation and formatting by the use of the kasprintf() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016133135.1203643-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pvpanic-mmio.c and pvpanic-pci.c share a lot of code.
Refactor it into pvpanic.c where it doesn't have to be kept in sync
manually and where the core logic can be understood more easily.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231011-pvpanic-cleanup-v2-1-4b21d56f779f@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework Xilinx hwicap driver probe to use current best practices using
devres APIs, device_get_match_data(), and typed firmware property accessors.
There's no longer any non-DT probing, so CONFIG_OF ifdefs can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006214228.337064-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2023100613-lustiness-affiliate-7dcb@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GSC devices perform legal firmware initiated resets due to state transition
that may appear as unexpected to the driver. Lower the log level for those
devices to debug level and save the firmware status registers.
When the device comes out of the reset it is possible to check whether the
resets was due to a firmware error or an exception
and only than produce a warning.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231015080540.95922-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix kernel-doc warnings in hbm.c:
hbm.c:98: warning: No description found for return value of 'mei_hbm_write_message'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231012024845.29169-5-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix kernel-doc warnings in dma-ring.c:
dma-ring.c:130: warning: No description found for return value of 'mei_dma_copy_from'
dma-ring.c:150: warning: No description found for return value of 'mei_dma_copy_to'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231012024845.29169-4-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix misalignment between structures names and their kdoc in hw.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231011074301.223879-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In debugging platform or firmware related MEI-PXP connection
issues, having a timeout when clients (such as i915) calling
into mei-pxp's send/receive functions have proven useful as opposed to
blocking forever until the kernel triggers a watchdog panic (when
platform issues are experienced).
Update the mei-pxp component interface send and receive functions
to take in timeouts.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231011110157.247552-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable and enable mei-pxp client on errors to clean the internal state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231011110157.247552-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under memory pressure recv fails due to kmalloc failure,
and if drivers(pxp) retry send/receive, send blocks
indefinitely.
Send without recv leaves the channel in a bad state.
Retry send attempt after small timeout and reset the channel if
the retry failed on kmalloc failure too.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231011110157.247552-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add variation of the send and recv functions on bus
that define timeout.
Caller can use such functions in flow that can stuck
to bail out and not to put down the whole system.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231011110157.247552-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are DT properties that can be shared across different Solomon OLED
Display Controller families. Split them into a separate common schema to
avoid these properties to be duplicated in different DT bindings schemas.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-6-javierm@redhat.com
The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.
Instead adding an indirection level to allow the same modesetting pipeline
to be used by both controller families, add another pipeline for SSD132x.
This leads to some code duplication but it makes the driver easier to read
and reason about. Once other controller families are added (e.g: SSD133x),
some common code can be factored out in driver helpers to be shared by the
different families. But that can be done later once these patterns emerge.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-5-javierm@redhat.com
This deemed useful to avoid hardcoding a page height and allow to support
other Solomon controller families, but dividing the screen in pages seems
to be something that is specific to the SSD130x chip family.
For example, SSD132x chip family divides the screen in segments (columns)
and common outputs (rows), so the concept of screen pages does not exist
for the SSD132x family.
Let's drop this field from the device info struct and just use a constant
SSD130X_PAGE_HEIGHT macro to define the page height. While being there,
replace hardcoded 8 values in places where it is used as the page height.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-2-javierm@redhat.com
Using struct gpio_chip is not safe as it will disappear if the
underlying driver is unbound for any reason. Switch to using reference
counted struct gpio_device and its dedicated accessors.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[andy: used gpio_device_find_by_fwnode()]
Reviewed-by: Dipen Patel <dipenp@nvidia.com>
Link: https://lore.kernel.org/r/20231010151709.4104747-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add the required nodes to enable the DisplayPort interface, connected
to the Embedded DisplayPort port, where we have an internal display.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230816190427.2137768-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the DSI display found on the Sony Xperia M5, including
the necessary regulators configuration for it.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082822.680010-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the relevant nodes for display backlight on Sony Xperia M5: this
needs both the SoC PWM IP and MT6332 PMIC LED strings.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082822.680010-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Introduce all nodes for all of the display blocks in the MediaTek Helio
X10 MT6795 SoC, including the DSI PHY and DSI/DPI interfaces: those are
left disabled as usage is board specific.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082822.680010-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a devicetree for rev4 of Spherion. It uses the rt5682s audio codec
instead of the rt5682 used in the previous revision.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-6-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a devicetree for rev5-sku2 of Hayato. It uses the rt5682s audio
codec instead of the rt5682 used in the previous revision.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-5-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
There aren't enough users of the common asurada-audio dtsi files to
justify having them. It is simpler to just have the audio nodes directly
on the board files.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-4-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add binding for newer version of Google Spherion (Acer Chromebook 514):
rev4.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add binding for newer version of Google Hayato: rev5-sku2.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add iommu support in the SoC DTS using the 4 local arbiters (LARBs)
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-7-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Local arbiter (LARB) is a component of Smart Multimedia Interface (SMI),
used to help the memory management (IOMMU).
This patch add 4 LARBs and 2 clocks for the larb1 and larb3 support.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-6-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Smart Multimedia Interface (SMI) local arbiter does the arbitration for
memory requests from multi-media engines. Add SMI in the MT8365 DTS will
allow to add local ARBiter (LARB), use by IOMMU.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-5-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
AI Processor Unit System (APUSYS) is a highly efficient computing unit
system which is most suitable for AI/CV algorithms. It includes one
programmable AI processor (Cadence VP6) for both AI and CV algorithms,
and an eDMA engine for data movement between external DRAM and VP6
internal memory.
For more detail, ask Mediatek for the MT8365 IoT application processor
functional specification.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-3-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
