When a foreign LHS rule (TC rule from a tunnel netdev which requests
conntrack lookup) matches on inner headers or enc_key_id, these matches
cannot be performed by the Outer Rule table, as the keys are only
available after the tunnel type has been identified (by the OR lookup)
and the rest of the headers parsed accordingly.
Offload such rules with an Action Rule, using the LOOKUP_CONTROL section
of the AR response to specify the conntrack and/or recirculation actions,
combined with an Outer Rule which performs only the usual Encap Match
duties.
This processing flow, as it requires two AR lookups per packet, is less
performant than OR-CT-AR, so only use it where necessary.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were a few places where no extack error message was set, or the
extack was not forwarded to callees, potentially resulting in a return
of -EOPNOTSUPP with no additional information.
Make sure to populate the error message in these cases. In practice
this does us no good as TC indirect block callbacks don't come with an
extack to fill in; but maybe they will someday and when debugging it's
possible to provide a fake extack and emit its message to the console.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Normally, if a TC filter on a tunnel netdev does not match on any
encap fields, we decline to offload it, as it cannot meet our
requirement for a <sip,dip,dport> tuple for the encap match.
However, if the rule has a nonzero chain_index, then for a packet to
reach the rule, it must already have matched a LHS rule which will
have included an encap match and determined the tunnel type, so in
that case we can offload the right-hand-side rule.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a tunnel netdevice (such as a vxlan) to offload conntrack lookups,
in much the same way as efx netdevs.
To ensure this rule does not overlap with other tunnel rules on the same
sip,dip,dport tuple, register a pseudo encap match of a new type
(EFX_TC_EM_PSEUDO_OR), which unlike PSEUDO_MASK may only be referenced
once (because an actual Outer Rule in hardware exists, although its
fw_id is not recorded in the encap match entry).
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make driver aware of a newly added error code so that it can provide a
more appropriate error message.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-9-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Granite Rapids(GNR) and Sierra Forest(SRF) cpuids to x86 match table
so that IFS driver can be loaded for those.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-8-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add an additional check to validate IFS image metadata field prior to
loading the test image.
If start_chunk is not a multiple of chunks_per_stride error out.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-7-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Perform additional validation prior to loading IFS image.
Error out if the size of the file being loaded doesn't match the size
specified in the header.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-6-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Width of chunk related bitfields is ACTIVATE_SCAN and SCAN_STATUS MSRs
are different in newer IFS generation compared to gen0.
Make changes to scan test flow such that MSRs are populated
appropriately based on the generation supported by hardware.
Account for the 8/16 bit MSR bitfield width differences between gen0 and
newer generations for the scan test trace event too.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-5-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Scan image loading flow for newer IFS generations are slightly different
from that of current generation. In newer schemes, loading need not be
done once for each socket as was done in gen0.
Also the width of NUM_CHUNKS bitfield in SCAN_HASHES_STATUS MSR has
increased from 8 -> 16 bits. Similarly there are width differences for
CHUNK_AUTHENTICATION_STATUS too.
Further the parameter to AUTHENTICATE_AND_COPY_CHUNK is passed
differently in newer generations.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-4-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
IFS image loading flow is slightly different for newer IFS generations.
In preparation for adding support for newer IFS generations, refactor
portions of existing image loading code for reuse.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-3-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
IFS generation number is reported via MSR_INTEGRITY_CAPS. As IFS
support gets added to newer CPUs, some differences are expected during
IFS image loading and test flows.
Define MSR bitmasks to extract and store the generation in driver data,
so that driver can modify its MSR interaction appropriately.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-2-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Vladimir Oltean says:
====================
Fixes for lynx-28g PHY driver
This series fixes some issues in the Lynx 28G SerDes driver, namely an
oops when unloading the module, a race between the periodic workqueue
and the PHY API, and a race between phy_set_mode_ext() calls on multiple
lanes on the same SerDes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The protocol converter configuration registers PCC8, PCCC, PCCD
(implemented by the driver), as well as others, control protocol
converters from multiple lanes (each represented as a different
struct phy). So, if there are simultaneous calls to phy_set_mode_ext()
to lanes sharing the same PCC register (either for the "old" or for the
"new" protocol), corruption of the values programmed to hardware is
possible, because lynx_28g_rmw() has no locking.
Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take
the global spinlock from the phy_ops :: set_mode() implementation. There
are no other callers which modify PCC registers.
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset
the lane receiver if the CDR has not locked onto bit transitions in the
RX stream. But the PHY consumer may do stuff with the PHY simultaneously,
and that isn't okay. Block concurrent generic PHY calls by holding the
PHY mutex from this workqueue.
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The blamed commit added the CDR check work item but didn't cancel it on
the remove path. Fix this by adding a remove function which takes care
of it.
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent PMFW have the capability that can force flush the FIFO
contents to DRAM on sending a command id via the mailbox. Add this support
to the driver.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230910142034.2967110-1-Shyam-sundar.S-k@amd.com
[ij: Corrected whitespace in dev_dbg_once()]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct nh_group.
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct nh_notifier_grp_info.
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: netdev@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct netlink_policy_dump_state.
Additionally update the size of the usage array length before accessing
it. This requires remembering the old size for the memset() and later
assignments.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct nfp_eth_table.
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Yinjun Zhang <yinjun.zhang@corigine.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Yu Xiao <yu.xiao@corigine.com>
Cc: Sixiang Chen <sixiang.chen@corigine.com>
Cc: oss-drivers@corigine.com
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
asm/prom.h should not be included directly as it no longer contains
anything drivers need. Drivers should include of.h and/or other headers
which were getting implicitly included.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231003163209.770750-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add new control element 'PCM Slave Access Mode' which shows the access
mode (interleaved/non-interleaved) for the PCM playing device. Add
corresponding control change notification calls.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230927113555.14877-2-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current version of the loopback driver supports interleaved access
mode only. This patch introduces support for the non-interleaved
access mode.
When in the interleaved mode, the 'copy_play_buf' function copies data
from the playback to the capture buffer using one memcpy call. This call
copies samples for multiple, interleaved channels.
In the non-interleaved mode we have multiple channel buffers, so we have
to perform multiple memcpy calls to copy samples channel after channel.
Add new function called 'copy_play_buf_part_n', which copies a part of
each channel buffer from playback to capture. Modify the 'copy_play_buf'
to use the corresponding memory copy function(just memcpy /
copy_play_buf_part_n) depending on the access mode.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230927113555.14877-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While grep'ing for SIS7012, I noticed that there is
only one reference to it in sound/pci/intel8x0m.c,
while most of its code lives in sound/pci/intel8x0.c.
This probably was a simple copy'n'paste mistake, as
the sound/pci/intel8x0m.c driver implements support
for SIS7013 (see DEVICE_SIS), and the two devices
seem to share the same behavior / registers.
Signed-off-by: Thomas Perl <m@thp.io>
Link: https://lore.kernel.org/r/5E4B5CA1-1109-4C82-A581-838ACF19A15D@thp.io
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Focusrite Clarett+ series uses the same protocol as the Scarlett
Gen 2 and Gen 3 series. This patch adds support for the Clarett+ 2Pre
and Clarett+ 4Pre similarly to the existing 8Pre support by adding
appropriate entries to the scarlett2 driver.
The Clarett 2Pre USB and 4Pre USB presumably use the same protocol as
well, so support for them can easily be added if someone can test.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZRL7qjC3tYQllT3H@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_ext_host_stream_setup() abstracts the procedure details away.
Simplify the code by using it.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_ext_host_stream_setup() abstracts the procedure details away.
Simplify the code by using it.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDAudio stream setup procedure differs between revisions of the
controller device. Currently the differences are handled directly within
AudioDSP platform drivers with if-statements. Implement a more generic
approach and expose a function that a platform driver may use to ensure
the correct procedure is followed each time.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Software shall read SDxFIFOS calculated by the hardware and notify if
invalid value is programmed before continuing the stream preparation.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel RVP board (0x12cc) has Headset Mic issue for reboot.
If system plugged headset when system reboot the headset Mic was gone.
Fixes: 1a93f10c5b ("ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/28112f54c0c6496f97ac845645bc0256@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a Opencomm2 Headset is connected to a Bluetooth USB dongle,
the audio playback functions properly, but the microphone does not work.
In the dmesg logs, there are messages indicating that the init_pitch
function fails when the capture process begins.
The microphone only functions when the ep pitch control is not set.
Toggling the pitch control off bypasses the init_piatch function
and allows the microphone to work.
Signed-off-by: WhaleChang <whalechang@google.com>
Link: https://lore.kernel.org/r/20231006044852.4181022-1-whalechang@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is an unlikely but possible double free when loading firmware,
and a missing free calls if a firmware is successfully requested but
the coefficient file request fails, leading to the fallback firmware
request occurring without clearing the previously loaded firmware.
Fixes: cd40dad2ca ("ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202309291331.0JUUQnPT-lkp@intel.com/
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231003142138.180108-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
PWM driver to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Eric has reported that commit dabc8b2075 ("quota: fix dqput() to
follow the guarantees dquot_srcu should provide") heavily increases
runtime of generic/270 xfstest for ext4 in nojournal mode. The reason
for this is that ext4 in nojournal mode leaves dquots dirty until the last
dqput() and thus the cleanup done in quota_release_workfn() has to write
them all. Due to the way quota_release_workfn() is written this results
in synchronize_srcu() call for each dirty dquot which makes the dquot
cleanup when turning quotas off extremely slow.
To be able to avoid synchronize_srcu() for each dirty dquot we need to
rework how we track dquots to be cleaned up. Instead of keeping the last
dquot reference while it is on releasing_dquots list, we drop it right
away and mark the dquot with new DQ_RELEASING_B bit instead. This way we
can we can remove dquot from releasing_dquots list when new reference to
it is acquired and thus there's no need to call synchronize_srcu() each
time we drop dq_list_lock.
References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64
Reported-by: Eric Whitney <enwlinux@gmail.com>
Fixes: dabc8b2075 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
The 'clocks' property is mandatory for the PWM to operate.
Document it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
imx28 uses the same PWM block that is found on imx23.
Add an entry for fsl,imx28-pwm.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To allow a consumer driver to use the OPP library to scale the performance
for its device, let's dynamically add the OPP table when the device gets
attached to its SCMI performance domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-10-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To enable the performance level to be used for OPPs, let's convert into
using the dev_pm_opp_add_dynamic() API when creating them. This will be
particularly useful for the SCMI performance domain, as shown through
subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-9-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Let's simplify the code in scmi_dvfs_device_opps_add() by using
dev_pm_opp_remove_all_dynamic() in the error path.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-8-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This is the merge of immutable point in PM OPP tree shared with SCMI so
that the SCMI changes based on these OPP changes can be merged via the
SCMI tree.
* 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
As Krzysztof pointed out the better is to use MODULE_DEVICE_TABLE()
as it will be consistent with the content of the real ID table of
the platform devices.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As Krzysztof pointed out the better is to use MODULE_DEVICE_TABLE()
as it will be consistent with the content of the real ID table of
the platform devices.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are two adjacent "b" instructions, the second one is unreachable,
it is dead code, just remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rename GB-PC1 to GnuBee GB-PC1, and GB-PC2 to GnuBee GB-PC2 to include
brand and model name.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Each item of the resets property should define a reset. Split the item with
two resets on the ethernet node into two separate items.
Sort the items of the clocks property to the same line as a trivial change.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The "probe-type" property was only needed when used with the
(long obsolete) "direct-mapped" compatible value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
