Among the three CPU-hotplug teardown RCU callbacks, two of them early
exit if CONFIG_HOTPLUG_CPU=n, and one is left unchanged. In any case
all of them have an implementation when CONFIG_HOTPLUG_CPU=n.
Align instead with the common way to deal with CPU-hotplug teardown
callbacks and provide a proper stub when they are not supported.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
It seems that tipc_crypto_key_revoke() could be be invoked by
wokequeue tipc_crypto_work_rx() under process context and
timer/rx callback under softirq context, thus the lock acquisition
on &tx->lock seems better use spin_lock_bh() to prevent possible
deadlock.
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
tipc_crypto_work_rx() <workqueue>
--> tipc_crypto_key_distr()
--> tipc_bcast_xmit()
--> tipc_bcbase_xmit()
--> tipc_bearer_bc_xmit()
--> tipc_crypto_xmit()
--> tipc_ehdr_build()
--> tipc_crypto_key_revoke()
--> spin_lock(&tx->lock)
<timer interrupt>
--> tipc_disc_timeout()
--> tipc_bearer_xmit_skb()
--> tipc_crypto_xmit()
--> tipc_ehdr_build()
--> tipc_crypto_key_revoke()
--> spin_lock(&tx->lock) <deadlock here>
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the
driver does not enable the clock in stm32_dwmac_init() if the device was
suspended. The problem is that this same code runs on STM32 MCUs, which
do disable clk_rx during suspend, causing the clock to never be
re-enabled on resume.
This patch adds a variant flag to indicate that clk_rx remains enabled
during suspend, and uses this to decide whether to enable the clock in
stm32_dwmac_init() if the device was suspended.
This approach fixes this specific bug with limited opportunity for
unintended side-effects, but I have a follow up patch that will refactor
the clock configuration and hopefully make it less error prone.
Fixes: 6528e02cc9 ("net: ethernet: stmmac: add adaptation for stm32mp157c.")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Björn Töpel says:
====================
From: Björn Töpel <bjorn@rivosinc.com>
Commit 08d0ce30e0 ("riscv: Implement syscall wrappers") introduced
some regressions in libbpf, and the kselftests BPF suite, which are
fixed with these three patches.
Note that there's an outstanding fix [1] for ftrace syscall tracing
which is also a fallout from the commit above.
Björn
[1] https://lore.kernel.org/linux-riscv/20231003182407.32198-1-alexghiti@rivosinc.com/
Alexandre Ghiti (1):
libbpf: Fix syscall access arguments on riscv
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add missing sys_nanosleep name for RISC-V, which is used by some tests
(e.g. attach_probe).
Fixes: 08d0ce30e0 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-4-bjorn@kernel.org
SYS_PREFIX was missing for a RISC-V, which made a couple of kprobe
tests fail.
Add missing SYS_PREFIX for RISC-V.
Fixes: 08d0ce30e0 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-3-bjorn@kernel.org
There is a copy and paste error so this uses a valid pointer instead of
an error pointer.
Fixes: 09eeb3aecc ("ptp_ocp: implement DPLL ops")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/5c581336-0641-48bd-88f7-51984c3b1f79@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete inaccurate descriptions and obsolete metadata for test cases.
It adds zero value, and has a non-zero chance of becoming stale and
misleading in the future. No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230914094803.94661-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Treat %ll* formats the same as %l* formats when processing printfs from
the guest so that using e.g. %llx instead of %lx generates the expected
output. Ideally, unexpected formats would generate compile-time warnings
or errors, but it's not at all obvious how to actually accomplish that.
Alternatively, guest_vsnprintf() could assert on an unexpected format,
but since the vast majority of printfs are for failed guest asserts,
getting *something* printed is better than nothing.
E.g. before
==== Test Assertion Failure ====
x86_64/private_mem_conversions_test.c:265: mem[i] == 0
pid=4286 tid=4290 errno=4 - Interrupted system call
1 0x0000000000401c74: __test_mem_conversions at private_mem_conversions_test.c:336
2 0x00007f3aae6076da: ?? ??:0
3 0x00007f3aae32161e: ?? ??:0
Expected 0x0 at offset 0 (gpa 0x%lx), got 0x0
and after
==== Test Assertion Failure ====
x86_64/private_mem_conversions_test.c:265: mem[i] == 0
pid=5664 tid=5668 errno=4 - Interrupted system call
1 0x0000000000401c74: __test_mem_conversions at private_mem_conversions_test.c:336
2 0x00007fbe180076da: ?? ??:0
3 0x00007fbe17d2161e: ?? ??:0
Expected 0x0 at offset 0 (gpa 0x100000000), got 0xcc
Fixes: e511938249 ("KVM: selftests: Add guest_snprintf() to KVM selftests")
Cc: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230921171641.3641776-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Most of the time there's no need to kick the vCPU and deliver the timer
event through kvm_xen_inject_timer_irqs(). Use kvm_xen_set_evtchn_fast()
directly from the timer callback, and only fall back to the slow path if
delivering the timer would block, i.e. if kvm_xen_set_evtchn_fast()
returns -EWOULDBLOCK. If delivery fails for any other reason, do nothing
and just let it fail silently, as that is what the slow path would end up
doing anyways.
This gives a significant improvement in timer latency testing (using
nanosleep() for various periods and then measuring the actual time
elapsed).
However, there was a reason[1] the fast path was dropped when this support
was first added. The current code holds vcpu->mutex for all operations on
the kvm->arch.timer_expires field, and the fast path introduces a
potential race condition. Avoid that race by ensuring the hrtimer is
(temporarily) cancelled before making changes in kvm_xen_start_timer(),
and also when reading the values out for KVM_XEN_VCPU_ATTR_TYPE_TIMER.
[1] https://lore.kernel.org/kvm/846caa99-2e42-4443-1070-84e49d2f11d2@redhat.com
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/f21ee3bd852761e7808240d4ecaec3013c649dc7.camel@infradead.org
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove the mt753x_phylink_pcs_link_up() function for two reasons:
1) priv->pcs[i].pcs.neg_mode is set true, meaning it doesn't take a
MLO_AN_FIXED anymore, but one of PHYLINK_PCS_NEG_*. However, this
is inconsequential due to...
2) priv->pcs[port].pcs.ops is always initialised to point at
mt7530_pcs_ops, which does not have a pcs_link_up() member.
So, let's remove mt753x_phylink_pcs_link_up() entirely.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qlTQS-008BWe-Va@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.
Initialize the workqueue within _probe instead.
Fixes: 13de9cca51 ("HID: cp2112: add IRQ chip handling")
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Support player LED patterns up to 8 players.
(Note that the behavior still consinsts in increasing the player number
every time a controller is connected, never decreasing it. It should be
as is described in https://bugzilla.kernel.org/show_bug.cgi?id=216225.
However, any implementation here would stop making sense as soon as a
non-Nintendo controller is connected, which is why I'm not bothering.)
- Split part of `joycon_home_led_brightness_set` (which is called by hid)
into `joycon_set_home_led` (which is what actually sets the LEDs), for
consistency with player LEDs.
- `joycon_player_led_brightness_set` won't try it to "determine which
player led this is" anymore: it's already looking at every LED
brightness value.
- Instead of first registering the `led_classdev`, then attempting to set
the LED and unregistering the `led_classdev` if it fails, first attempt
to set the LED, then register the `led_classdev` only if it succeeds
(the class is still filled up in either case).
- If setting the player LEDs fails, still attempt setting the home LED.
(I don't know there's a third party controller where this may actually
happen, but who knows...)
- Use `JC_NUM_LEDS` where appropriate instead of 4.
- Print return codes in more places.
- Use spinlock instead of mutex for `input_num`. Copy its value to a local
variable, so that it can be unlocked immediately.
- `input_num` starts counting from 0
- Less holding of mutexes in general.
Signed-off-by: Martino Fontana <tinozzo123@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Built-in firmware of cptkbd handles scrolling by itself (when middle
button is pressed) but with issues: it does not support horizontal and
hi-res scrolling and upon middle button release it sends middle button
click even if there was a scrolling event. Commit 3cb5ff0220 ("HID:
lenovo: Hide middle-button press until release") workarounds last
issue but it's impossible to workaround scrolling-related issues
without firmware modification.
Likely, Dennis Schneider has reverse engineered the firmware and
provided an instruction on how to patch it [1]. However,
aforementioned workaround prevents userspace (libinput) from knowing
exact moment when middle button has been pressed down and performing
"On-Button scrolling". This commit detects correctly-behaving patched
firmware if cursor movement events has been received during middle
button being pressed and stops applying workaround for this device.
Link: https://hohlerde.org/rauch/en/elektronik/projekte/tpkbd-fix/ [1]
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Smatch complains about returning negative error codes from a type
bool function.
kernel/cgroup/cpuset.c:705 cpu_exclusive_check() warn:
signedness bug returning '(-22)'
The code works correctly, but it is confusing. The current behavior is
that cpu_exclusive_check() returns true if it's *NOT* exclusive. Rename
it to cpusets_are_exclusive() and reverse the returns so it returns true
if it is exclusive and false if it's not. Update both callers as well.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201706.2LhKdM6o-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In order to simplify some error handling paths and avoid code duplication,
introduce thunderstrike_destroy() which undoes thunderstrike_create().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing calls.
Fixes: 3ab196f882 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing call. Make sure it is safe to call in the probe error
handling path by preventing the led_classdev from attempting to set the LED
brightness to the off state on unregister.
Fixes: f88af60e74 ("HID: nvidia-shield: Support LED functionality for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When a local partition becomes invalid, it won't transition back to
valid partition automatically if a proper "cpuset.cpus.exclusive" or
"cpuset.cpus" change is made. Instead, system administrators have to
explicitly echo "root" or "isolated" into the "cpuset.cpus.partition"
file at the partition root.
This patch now enables the automatic transition of an invalid local
partition back to valid when there is a proper "cpuset.cpus.exclusive"
or "cpuset.cpus" change.
Automatic transition of an invalid remote partition to a valid one,
however, is not covered by this patch. They still need an explicit
write to "cpuset.cpus.partition" to become valid again.
The test_cpuset_prs.sh test script is updated to add new test cases to
test this automatic state transition.
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/lkml/9777f0d2-2fdf-41cb-bd01-19c52939ef42@arm.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The COPS Appletalk support is very old, never said to actually work
properly, and the firmware code for the devices are under a very suspect
license. Remove it all to clear up the license issue, if it is still
needed and actually used by anyone, we can add it back later once the
license is cleared up.
Reported-by: Prarit Bhargava <prarit@redhat.com>
Cc: jschlst@samba.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230927090029.44704-2-gregkh@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Battery information reported by the driver depends on the power supply
subsystem. Select the required subsystem when the HID_NVIDIA_SHIELD Kconfig
option is enabled.
Fixes: 3ab196f882 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We have a need of using favordynmods with cgroup v1, which doesn't support
changing mount flags during remount. Enabling CONFIG_CGROUP_FAVOR_DYNMODS at
build-time is not an option because we want to be able to selectively
enable it for certain systems.
This commit addresses this by introducing the cgroup_favordynmods=
command-line option. This option works for both cgroup v1 and v2 and also
allows for disabling favorynmods when the kernel built with
CONFIG_CGROUP_FAVOR_DYNMODS=y.
Also, note that when cgroup_favordynmods=true favordynmods is never
disabled in cgroup_destroy_root().
Signed-off-by: Luiz Capitulino <luizcap@amazon.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The following crash is observed 100% of the time during resume from
the hibernation on a x86 QEMU system.
[ 12.931887] ? __die_body+0x1a/0x60
[ 12.932324] ? page_fault_oops+0x156/0x420
[ 12.932824] ? search_exception_tables+0x37/0x50
[ 12.933389] ? fixup_exception+0x21/0x300
[ 12.933889] ? exc_page_fault+0x69/0x150
[ 12.934371] ? asm_exc_page_fault+0x26/0x30
[ 12.934869] ? get_buffer.constprop.0+0xac/0x100
[ 12.935428] snapshot_write_next+0x7c/0x9f0
[ 12.935929] ? submit_bio_noacct_nocheck+0x2c2/0x370
[ 12.936530] ? submit_bio_noacct+0x44/0x2c0
[ 12.937035] ? hib_submit_io+0xa5/0x110
[ 12.937501] load_image+0x83/0x1a0
[ 12.937919] swsusp_read+0x17f/0x1d0
[ 12.938355] ? create_basic_memory_bitmaps+0x1b7/0x240
[ 12.938967] load_image_and_restore+0x45/0xc0
[ 12.939494] software_resume+0x13c/0x180
[ 12.939994] resume_store+0xa3/0x1d0
The commit being fixed introduced a bug in copying the zero bitmap
to safe pages. A temporary bitmap is allocated with PG_ANY flag in
prepare_image() to make a copy of zero bitmap after the unsafe pages
are marked. Freeing this temporary bitmap with PG_UNSAFE_KEEP later
results in an inconsistent state of unsafe pages. Since free bit is
left as is for this temporary bitmap after free, these pages are
treated as unsafe pages when they are allocated again. This results
in incorrect calculation of the number of pages pre-allocated for the
image.
nr_pages = (nr_zero_pages + nr_copy_pages) - nr_highmem - allocated_unsafe_pages;
The allocate_unsafe_pages is estimated to be higher than the actual
which results in running short of pages in safe_pages_list. Hence the
crash is observed in get_buffer() due to NULL pointer access of
safe_pages_list.
Fix this issue by creating the temporary zero bitmap from safe pages
(free bit not set) so that the corresponding free bits can be cleared
while freeing this bitmap.
Fixes: 005e8dddd4 ("PM: hibernate: don't store zero pages in the image file")
Suggested-by:: Brian Geffon <bgeffon@google.com>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Due to a small omission, the offload_failed flag is missing from ipv4
fibmatch results. Make sure it is set correctly.
The issue can be witnessed using the following commands:
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add dummy1 up type dummy
ip route add 192.0.2.0/24 dev dummy1
echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload
ip route add 198.51.100.0/24 dev dummy1
ip route
# 192.168.15.0/24 has rt_trap
# 198.51.100.0/24 has rt_offload_failed
ip route get 192.168.15.1 fibmatch
# Result has rt_trap
ip route get 198.51.100.1 fibmatch
# Result differs from the route shown by `ip route`, it is missing
# rt_offload_failed
ip link del dev dummy1
echo 1 > /sys/bus/netdevsim/del_device
Fixes: 36c5100e85 ("IPv4: Add "offload failed" indication to routes")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This kselftest fixes update for Linux 6.6-rc5 consists of one single
fix to Makefile to fix the incorrect TARGET name for uevent test.
-----BEGIN PGP SIGNATURE-----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=W9Tx
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to Makefile to fix the incorrect TARGET name for uevent
test"
* tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix wrong TARGET in kselftest top level Makefile
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
-----BEGIN PGP SIGNATURE-----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=OL/S
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a collection of fixes this time, really too many
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
* tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits)
wifi: iwlwifi: mvm: Fix incorrect usage of scan API
wifi: mac80211: Create resources for disabled links
wifi: cfg80211: avoid leaking stack data into trace
wifi: mac80211: allow transmitting EAPOL frames with tainted key
wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
wifi: cfg80211: Fix 6GHz scan configuration
wifi: mac80211: fix potential key leak
wifi: mac80211: fix potential key use-after-free
wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
wifi: brcmfmac: Replace 1-element arrays with flexible arrays
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM
rfkill: sync before userspace visibility/changes
wifi: mac80211: fix mesh id corruption on 32 bit systems
wifi: cfg80211: add missing kernel-doc for cqm_rssi_work
wifi: cfg80211: fix cqm_config access race
wifi: iwlwifi: mvm: Fix a memory corruption issue
wifi: iwlwifi: Ensure ack flag is properly cleared.
wifi: iwlwifi: dbg_ini: fix structure packing
iwlwifi: mvm: handle PS changes in vif_cfg_changed
...
====================
Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
Thanks
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
Link: https://lore.kernel.org/all/20231002083832.19746-1-leon@kernel.org
Signed-of-by: Leon Romanovsky <leon@kernel.org>
* mlx5-next: (576 commits)
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
Linux 6.6-rc3
...
The imx8dl FEC has the same programming model as the one on the imx8qxp.
Add the imx8dl compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926111017.320409-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
So far, nobody calls functions parse_crashkernel_high() and
parse_crashkernel_low(), remove both of them.
Link: https://lkml.kernel.org/r/20230914033142.676708-10-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and
DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic();
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/riscv/Kconfig.
The old reserve_crashkernel_low() and reserve_crashkernel() can be
removed.
[chenjiahao16@huawei.com: fix crashkernel reserving problem on RISC-V]
Link: https://lkml.kernel.org/r/20230925024333.730964-1-chenjiahao16@huawei.com
Link: https://lkml.kernel.org/r/20230914033142.676708-9-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and
DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic();
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/arm64/Kconfig.
The old reserve_crashkernel_low() and reserve_crashkernel() can be
removed.
Link: https://lkml.kernel.org/r/20230914033142.676708-8-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and
DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic(), and do the ARCH specific work if
needed.
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/x86/Kconfig.
When adding DEFAULT_CRASH_KERNEL_LOW_SIZE, add crash_low_size_default() to
calculate crashkernel low memory because x86_64 has special requirement.
The old reserve_crashkernel_low() and reserve_crashkernel() can be
removed.
[bhe@redhat.com: move crash_low_size_default() code into <asm/crash_core.h>]
Link: https://lkml.kernel.org/r/ZQpeAjOmuMJBFw1/@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20230914033142.676708-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both crashk_res and crashk_low_res are used to mark the reserved
crashkernel regions in iomem_resource tree. And later the generic
crashkernel resrvation will be added into crash_core.c. So move
crashk_res and crashk_low_res definition into crash_core.c to avoid
compiling error if CONFIG_CRASH_CORE=on while CONFIG_KEXEC_CORE is unset.
Meanwhile include <asm/crash_core.h> in <linux/crash_core.h> if generic
reservation is needed. In that case, <asm/crash_core.h> need be added by
ARCH. In asm/crash_core.h, ARCH can provide its own macro definitions to
override macros in <linux/crash_core.h> if needed. Wrap the including
into CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION ifdeffery scope to
avoid compiling error in other ARCH-es which don't take the generic
reservation way yet.
Link: https://lkml.kernel.org/r/20230914033142.676708-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In architecture like x86_64, arm64 and riscv, they have vast virtual
address space and usually have huge physical memory RAM. Their
crashkernel reservation doesn't have to be limited under 4G RAM, but can
be extended to the whole physical memory via crashkernel=,high support.
Now add function reserve_crashkernel_generic() to reserve crashkernel
memory if users specify any case of kernel pamameters, like
crashkernel=xM[@offset] or crashkernel=,high|low.
This is preparation to simplify code of crashkernel=,high support in
architecutures.
Link: https://lkml.kernel.org/r/20230914033142.676708-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now parse_crashkernel() is a real entry point for all kinds of crahskernel
parsing on any architecture.
And wrap the crahskernel=,high|low handling inside
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION ifdeffery scope.
Link: https://lkml.kernel.org/r/20230914033142.676708-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kdump: use generic functions to simplify crashkernel
reservation in arch", v3.
In the current arm64, crashkernel=,high support has been finished after
several rounds of posting and careful reviewing. The code in arm64 which
parses crashkernel kernel parameters firstly, then reserve memory can be a
good example for other ARCH to refer to.
Whereas in x86_64, the code mixing crashkernel parameter parsing and
memory reserving is twisted, and looks messy. Refactoring the code to
make it more readable maintainable is necessary.
Here, firstly abstract the crashkernel parameter parsing code into
parse_crashkernel() to make it be able to parse crashkernel=,high|low.
Then abstract the crashkernel memory reserving code into a generic
function reserve_crashkernel_generic(). Finally, in ARCH which
crashkernel=,high support is needed, a simple arch_reserve_crashkernel()
can be added to call above two functions. This can remove the duplicated
implmentation code in each ARCH, like arm64, x86_64 and riscv.
crashkernel=512M,high
crashkernel=512M,high crashkernel=256M,low
crashkernel=512M,high crashkernel=0M,low
crashkernel=0M,high crashkernel=256M,low
crashkernel=512M
crashkernel=512M@0x4f000000
crashkernel=1G-4G:256M,4G-64G:320M,64G-:576M
crashkernel=0M
This patch (of 9):
In all call sites of __parse_crashkernel(), the parameter 'name' is
hardcoded as "crashkernel=". So remove the unnecessary parameter 'name',
add local varibale 'name' inside __parse_crashkernel() instead.
Link: https://lkml.kernel.org/r/20230914033142.676708-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20230914033142.676708-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with
sysfs_emit().
Direct replacement is safe here since its ok for `kernel_param_ops.get()`
to return -errno [3].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
[3] https://elixir.bootlin.com/linux/v6.5/source/include/linux/moduleparam.h#L52
Link: https://lkml.kernel.org/r/20230831193827.1528867-1-azeemshaikh38@gmail.com
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
BUILD_BUG_ON*() macros are defined in build_bug.h. Include it. Replace
compiler_types.h by compiler.h, which provides the former, to have a
definition of the __UNIQUE_ID().
Link: https://lkml.kernel.org/r/20230912092355.79280-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 95846ecf9dac("pid: replace pid bitmap implementation with IDR API")
removes 'last_pid' element, and use the idr_get_cursor-idr_set_cursor pair
to set the value of idr, so useless comments should be removed.
Link: https://lkml.kernel.org/r/tencent_157A2A1CAF19A3F5885F0687426159A19708@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It appears that compiler_types.h already have an implementation of the
__unconst_integer_typeof() called __unqual_scalar_typeof(). Use it
instead of the copy.
Link: https://lkml.kernel.org/r/20230911154913.4176033-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do/while_each_thread should be avoided when possible.
Plus I _think_ this change allows to avoid lock_task_sighand() but I am
not sure, I forgot everything about taskstats. In any case, this code
does not look right in that the same thread can be accounted twice:
taskstats_exit() can account the exiting thread in signal->stats and drop
->siglock but this thread is still on the thread-group list, so
lock_task_sighand() can't help.
Link: https://lkml.kernel.org/r/20230909214951.GA24274@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
