debugfs interface is deprecated. Put it at the bottom of the document
so that readers have less chances to read it.
Link: https://lkml.kernel.org/r/20230907022929.91361-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: misc fixups for documents, comments and its
tracepoint".
This patchset contains miscellaneous simple fixups for documents, comments and
tracepoint of DAMON.
This patch (of 11):
A cross-link reference in DAMON usage document is missing ':ref:' Sphynx
keyword. Fix it.
Link: https://lkml.kernel.org/r/20230907022929.91361-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230907022929.91361-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Out of zswap's 3 allocators, zsmalloc is the clear superior in terms of
memory utilization, both in theory and as observed in practice, with its
high storage density and low internal fragmentation. zsmalloc is also
more actively developed and maintained, since it is the allocator of
choice for zswap for many users, as well as the only allocator for zram.
A historical objection to the selection of zsmalloc as the default
allocator for zswap is its lack of writeback capability. However, this
has changed, with the zsmalloc writeback patchset, and the subsequent
zswap LRU refactor. With this, there is not a lot of good reasons to keep
zbud, an otherwise inferior allocator, as the default instead of zswap.
This patch changes the default allocator to zsmalloc. The only exception
is on settings without MMU, in which case zbud will remain as the default.
Link: https://lkml.kernel.org/r/20230908235115.2943486-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is possible that the aligned address falls on no existing mapping,
however that does not mean that we can just align it down to that. This
test verifies that the "vma->vm_start != addr_to_align" check in
can_align_down() prevents disastrous results if aligning down when source
and dest are mutually aligned within a PMD but the source/dest addresses
requested are not at the beginning of the respective mapping containing
these addresses.
Link: https://lkml.kernel.org/r/20230903151328.2981432-8-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move a block of memory within a memory range. Any alignment optimization
on the source address may cause corruption. Verify using kselftest that
it works. I have also verified with tracing that such optimization does
not happen due to this check in can_align_down():
if (!for_stack && vma->vm_start != addr_to_align)
return false;
Link: https://lkml.kernel.org/r/20230903151328.2981432-7-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds support for verifying that we correctly handle the
situation where something is already mapped before the destination of the remap.
Any realignment of destination address and PMD-copy will destroy that
existing mapping. In such cases, we need to avoid doing the optimization.
To test this, we map an area called the preamble before the remap
region. Then we verify after the mremap operation that this region did not get
corrupted.
Putting some prints in the kernel, I verified that we optimize
correctly in different situations:
Optimize when there is alignment and no previous mapping (this is tested
by previous patch).
<prints>
can_align_down(old_vma->vm_start=2900000, old_addr=2900000, mask=-2097152): 0
can_align_down(new_vma->vm_start=2f00000, new_addr=2f00000, mask=-2097152): 0
=== Starting move_page_tables ===
Doing PUD move for 2800000 -> 2e00000 of extent=200000 <-- Optimization
Doing PUD move for 2a00000 -> 3000000 of extent=200000
Doing PUD move for 2c00000 -> 3200000 of extent=200000
</prints>
Don't optimize when there is alignment but there is previous mapping
(this is tested by this patch).
Notice that can_align_down() returns 1 for the destination mapping
as we detected there is something there.
<prints>
can_align_down(old_vma->vm_start=2900000, old_addr=2900000, mask=-2097152): 0
can_align_down(new_vma->vm_start=5700000, new_addr=5700000, mask=-2097152): 1
=== Starting move_page_tables ===
Doing move_ptes for 2900000 -> 5700000 of extent=100000 <-- Unoptimized
Doing PUD move for 2a00000 -> 5800000 of extent=200000
Doing PUD move for 2c00000 -> 5a00000 of extent=200000
</prints>
Link: https://lkml.kernel.org/r/20230903151328.2981432-6-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds a test case to check if a PMD-alignment optimization
successfully happens.
I add support to make sure there is some room before the source mapping,
otherwise the optimization to trigger PMD-aligned move will be disabled as
the kernel will detect that a mapping before the source exists and such
optimization becomes impossible.
Link: https://lkml.kernel.org/r/20230903151328.2981432-5-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a valid remap region could not be found, the source mapping is not
cleaned up. Fix the goto statement such that the clean up happens.
Link: https://lkml.kernel.org/r/20230903151328.2981432-4-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the stack move happening in shift_arg_pages(), the move is happening
within the same VMA which spans the old and new ranges.
In case the aligned address happens to fall within that VMA, allow such
moves and don't abort the mremap alignment optimization.
In the regular non-stack mremap case, we cannot allow any such moves as
will end up destroying some part of the mapping (either the source of the
move, or part of the existing mapping). So just avoid it for stack moves.
Link: https://lkml.kernel.org/r/20230903151328.2981432-3-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Optimize mremap during mutual alignment within PMD", v6.
This patchset optimizes the start addresses in move_page_tables() and
tests the changes. It addresses a warning [1] that occurs due to a
downward, overlapping move on a mutually-aligned offset within a PMD
during exec. By initiating the copy process at the PMD level when such
alignment is present, we can prevent this warning and speed up the copying
process at the same time. Linus Torvalds suggested this idea. Check the
individual patches for more details. [1]
https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/
This patch (of 7):
Recently, we see reports [1] of a warning that triggers due to
move_page_tables() doing a downward and overlapping move on a
mutually-aligned offset within a PMD. By mutual alignment, I mean the
source and destination addresses of the mremap are at the same offset
within a PMD.
This mutual alignment along with the fact that the move is downward is
sufficient to cause a warning related to having an allocated PMD that does
not have PTEs in it.
This warning will only trigger when there is mutual alignment in the move
operation. A solution, as suggested by Linus Torvalds [2], is to initiate
the copy process at the PMD level whenever such alignment is present.
Implementing this approach will not only prevent the warning from being
triggered, but it will also optimize the operation as this method should
enhance the speed of the copy process whenever there's a possibility to
start copying at the PMD level.
Some more points:
a. The optimization can be done only when both the source and
destination of the mremap do not have anything mapped below it up to a
PMD boundary. I add support to detect that.
b. #1 is not a problem for the call to move_page_tables() from exec.c as
nothing is expected to be mapped below the source. However, for
non-overlapping mutually aligned moves as triggered by mremap(2), I
added support for checking such cases.
c. I currently only optimize for PMD moves, in the future I/we can build
on this work and do PUD moves as well if there is a need for this. But I
want to take it one step at a time.
d. We need to be careful about mremap of ranges within the VMA itself.
For this purpose, I added checks to determine if the address after
alignment falls within its VMA itself.
[1] https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/
[2] https://lore.kernel.org/all/CAHk-=whd7msp8reJPfeGNyt0LiySMT0egExx3TVZSX3Ok6X=9g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230903151328.2981432-1-joel@joelfernandes.org
Link: https://lkml.kernel.org/r/20230903151328.2981432-2-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The decreasing of hugetlb pages number failed with the following message
given:
sh: page allocation failure: order:0, mode:0x204cc0(GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_THISNODE)
CPU: 1 PID: 112 Comm: sh Not tainted 6.5.0-rc7-... #45
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.6+0x84/0xe4
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
warn_alloc+0x100/0x1bc
__alloc_pages_slowpath.constprop.107+0xa40/0xad8
__alloc_pages+0x244/0x2d0
hugetlb_vmemmap_restore+0x104/0x1e4
__update_and_free_hugetlb_folio+0x44/0x1f4
update_and_free_hugetlb_folio+0x20/0x68
update_and_free_pages_bulk+0x4c/0xac
set_max_huge_pages+0x198/0x334
nr_hugepages_store_common+0x118/0x178
nr_hugepages_store+0x18/0x24
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x40/0x54
kernfs_fop_write_iter+0x164/0x1dc
vfs_write+0x3a8/0x460
ksys_write+0x6c/0x100
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.1+0x6c/0xe4
do_el0_svc+0x38/0x94
el0_svc+0x28/0x74
el0t_64_sync_handler+0xa0/0xc4
el0t_64_sync+0x174/0x178
Mem-Info:
...
The reason is that the hugetlb pages being released are allocated from
movable nodes, and with hugetlb_optimize_vmemmap enabled, vmemmap pages
need to be allocated from the same node during the hugetlb pages
releasing. With GFP_KERNEL and __GFP_THISNODE set, allocating from movable
node is always failed. Fix this problem by removing __GFP_THISNODE.
Link: https://lkml.kernel.org/r/20230905124503.24899-1-yuancan@huawei.com
Fixes: ad2fa3717b ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use this_cpu_try_cmpxchg instead of this_cpu_cmpxchg (*ptr, old, new) ==
old in mod_zone_state and mod_node_state. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg (and
related move instruction in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
No functional change intended.
Link: https://lkml.kernel.org/r/20230904150917.8318-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The one caller of DAX lock/unlock page already calls compound_head(), so
use page_folio() instead, then use a folio throughout the DAX code to
remove uses of page->mapping and page->index.
[jane.chu@oracle.com: add comment to mf_generic_kill_procss(), simplify mf_generic_kill_procs:folio initialization]
Link: https://lkml.kernel.org/r/20230908222336.186313-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20230822231314.349200-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The feature got retired in f1a7941243 ("mm: convert mm's rss stats into
percpu_counter"), but the patch failed to fully clean it up.
Link: https://lkml.kernel.org/r/20230823170556.2281747-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In skip_cma(), we can use folio_migratetype() to replace
get_pageblock_migratetype().
Link: https://lkml.kernel.org/r/20230825075735.52436-1-user@VERNHAO-MC1
Signed-off-by: Vern Hao <vernhao@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
si_mem_available() needlessly places LRU statistics into an array before
retrieving only two of them, simply access those directly.
In addition, refactor the code so that the blocks of code which calculate
the page cache and reclaimable components each resemble one another to
clearly indicate we cap both against wmark_low in the same fashion.
Link: https://lkml.kernel.org/r/20230827110848.43510-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In set_nr_huge_pages(), local variable "count" is used to record
persistent_huge_pages(), but when it cames to nodes huge page allocation,
the semantics changes to nr_huge_pages. When there exists surplus huge
pages and using the interface under
/sys/devices/system/node/node*/hugepages to change huge page pool size,
this difference can result in the allocation of an unexpected number of
huge pages.
Steps to reproduce the bug:
Starting with:
Node 0 Node 1 Total
HugePages_Total 0.00 0.00 0.00
HugePages_Free 0.00 0.00 0.00
HugePages_Surp 0.00 0.00 0.00
create 100 huge pages in Node 0 and consume it, then set Node 0 's
nr_hugepages to 0.
yields:
Node 0 Node 1 Total
HugePages_Total 200.00 0.00 200.00
HugePages_Free 0.00 0.00 0.00
HugePages_Surp 200.00 0.00 200.00
write 100 to Node 1's nr_hugepages
echo 100 > /sys/devices/system/node/node1/\
hugepages/hugepages-2048kB/nr_hugepages
gets:
Node 0 Node 1 Total
HugePages_Total 200.00 400.00 600.00
HugePages_Free 0.00 400.00 400.00
HugePages_Surp 200.00 0.00 200.00
Kernel is expected to create only 100 huge pages and it gives 200.
Link: https://lkml.kernel.org/r/20230829033343.467779-1-xueshi.hu@smartx.com
Fixes: 9a30523066 ("hugetlb: add per node hstate attributes")
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, vmemmap optimization of hugetlb pages is performed before the
hugetlb flag (previously hugetlb destructor) is set identifying it as a
hugetlb folio. This means there is a window of time where an ordinary
folio does not have all associated vmemmap present. The core mm only
expects vmemmap to be potentially optimized for hugetlb and device dax.
This can cause problems in code such as memory error handling that may
want to write to tail struct pages.
There is only one call to perform hugetlb vmemmap optimization today. To
fix this issue, simply set the hugetlb flag before that call.
There was a similar issue in the free hugetlb path that was previously
addressed. The two routines that optimize or restore hugetlb vmemmap
should only be passed hugetlb folios/pages. To catch any callers not
following this rule, add VM_WARN_ON calls to the routines. In the hugetlb
free code paths, some calls could be made to restore vmemmap after
clearing the hugetlb flag. This was 'safe' as in these cases vmemmap was
already present and the call was a NOOP. However, for consistency these
calls where eliminated so that we can add the VM_WARN_ON checks.
Link: https://lkml.kernel.org/r/20230829213734.69673-1-mike.kravetz@oracle.com
Fixes: f41f2ed43c ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix insert_vm_struct() so that only accounted memory is unaccounted if
vma_link() fails.
Link: https://lkml.kernel.org/r/20230830004324.16101-1-anthony.yznaga@oracle.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix mremap so that only accounted memory is unaccounted if the mapping is
expandable but vma_merge() fails.
Link: https://lkml.kernel.org/r/20230830004549.16131-1-anthony.yznaga@oracle.com
Fixes: fdbef61491 ("mm/mremap: don't account pages in vma_to_resize()")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We always do zone_watermark_ok check and compaction_suitable check
together to test if compaction for target order should be ran. Factor
these code out to remove repeat code.
Link: https://lkml.kernel.org/r/20230901155141.249860-7-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We do proactive compaction with order == -1 via
1. /proc/sys/vm/compact_memory
2. /sys/devices/system/node/nodex/compact
3. /proc/sys/vm/compaction_proactiveness
Add missed situation in which order == -1.
Link: https://lkml.kernel.org/r/20230901155141.249860-6-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have compact_blockskip_flush check in __reset_isolation_suitable, just
remove repeat check before __reset_isolation_suitable in
compact_blockskip_flush.
Link: https://lkml.kernel.org/r/20230901155141.249860-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In strict mode, we should return 0 if there is any hole in pageblock. If
we successfully isolated pages at beginning at pageblock and then have a
bogus compound_order outside pageblock in next page. We will abort search
loop with blockpfn > end_pfn. Although we will limit blockpfn to end_pfn,
we will treat it as a successful isolation in strict mode as blockpfn is
not < end_pfn and return partial isolated pages. Then
isolate_freepages_range may success unexpectly with hole in isolated
range.
Link: https://lkml.kernel.org/r/20230901155141.249860-4-shikemeng@huaweicloud.com
Fixes: 9fcd6d2e05 ("mm, compaction: skip compound pages by order in free scanner")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We use move_freelist_head after list_for_each_entry_reverse to skip recent
pages. And there is no need to do actual move if all freepages are
searched in list_for_each_entry_reverse, e.g. freepage point to first
page in freelist. It's more intuitively to call list_is_first with list
entry as the first argument and list head as the second argument to check
if list entry is the first list entry instead of call list_is_last with
list entry and list head passed in reverse.
Similarly, call list_is_last in move_freelist_tail is more intuitively.
Link: https://lkml.kernel.org/r/20230901155141.249860-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fixes and cleanups to compaction", v3.
This is a series to do fix and clean up to compaction.
Patch 1-2 fix and clean up freepage list operation.
Patch 3-4 fix and clean up isolation of freepages
Patch 7 factor code to check if compaction is needed for allocation order.
More details can be found in respective patches.
This patch (of 6):
The freepage is chained with buddy_list in freelist head. Use buddy_list
instead of lru to correct the list operation.
Link: https://lkml.kernel.org/r/20230901155141.249860-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20230901155141.249860-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KVM/arm64 has a couple schemes for handling vCPU feature selection now,
which is a lot to put on userspace. Add some documentation about how
these interact and provide some recommendations for how to use the
writable ID register scheme.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
All known fields in ID_AA64ZFR0_EL1 describe the unprivileged
instructions supported by the PE's SVE implementation. Allow userspace
to pick and choose the advertised feature set, though nothing stops the
guest from using undisclosed instructions.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Allow userspace to change the guest-visible value of the register with
some severe limitation:
- No changes to features not virtualized by KVM (AMU, MPAM, RAS)
- Short of full GICv2 emulation in kernel, hiding GICv3 from the guest
makes absolutely no sense.
- FP is effectively assumed for KVM VMs.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[oliver: restrict features that are illogical to change]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Allow userspace to modify the guest-visible values of these ID
registers. Prevent changes to any of the virtualization features until
KVM picks up support for nested and we have a handle on managing NV
features.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[oliver: prevent changes to EL2 features for now]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Almost all of the features described by the ISA registers have no KVM
involvement. Allow userspace to change the value of these registers with
a couple exceptions:
- MOPS is not writable as KVM does not currently virtualize FEAT_MOPS.
- The PAuth fields are not writable as KVM requires both address and
generic authentication be enabled.
Co-developed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Since ID_AA64DFR0_EL1 and ID_DFR0_EL1 are now writable from userspace,
it is safe to bump up the default KVM sanitised debug version to v8p8.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The debug architecture is mandatory in ARMv8, so KVM should not allow
userspace to configure a vCPU with less than that. Of course, this isn't
handled elegantly by the generic ID register plumbing, as the respective
ID register fields have a nonzero starting value.
Add an explicit check for debug versions less than v8 of the
architecture.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Much like we do for other fields, extract the Debug architecture version
from the ID register to populate the corresponding field in DBGDIDR.
Rewrite the existing sysreg field extractors to use SYS_FIELD_GET() for
consistency.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Since KVM now supports per-VM ID registers, use per-VM ID register
values for the sake of emulation for DBGDIDR and LORegion.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add some basic documentation on how to get feature ID register writable
masks from userspace.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
While the Feature ID range is well defined and pretty large, it isn't
inconceivable that the architecture will eventually grow some other
ranges that will need to similarly be described to userspace.
Add a VM ioctl to allow userspace to get writable masks for feature ID
registers in below system register space:
op0 = 3, op1 = {0, 1, 3}, CRn = 0, CRm = {0 - 7}, op2 = {0 - 7}
This is used to support mix-and-match userspace and kernels for writable
ID registers, where userspace may want to know upfront whether it can
actually tweak the contents of an idreg or not.
Add a new capability (KVM_CAP_ARM_SUPPORTED_FEATURE_ID_RANGES) that
returns a bitmap of the valid ranges, which can subsequently be
retrieved, one at a time by setting the index of the set bit as the
range identifier.
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The recent support for DPLL introduced by commit 8a3a565ff2 ("ice: add
admin commands to access cgu configuration") and commit d7999f5ea6 ("ice:
implement dpll interface to control cgu") broke linking the ice driver if
CONFIG_PTP_1588_CLOCK=n:
ld: vmlinux.o: in function `ice_init_feature_support':
(.text+0x8702b8): undefined reference to `ice_is_phy_rclk_present'
ld: (.text+0x8702cd): undefined reference to `ice_is_cgu_present'
ld: (.text+0x8702d9): undefined reference to `ice_is_clock_mux_present_e810t'
ld: vmlinux.o: in function `ice_dpll_init_info_direct_pins':
ice_dpll.c:(.text+0x894167): undefined reference to `ice_cgu_get_pin_freq_supp'
ld: ice_dpll.c:(.text+0x894197): undefined reference to `ice_cgu_get_pin_name'
ld: ice_dpll.c:(.text+0x8941a8): undefined reference to `ice_cgu_get_pin_type'
ld: vmlinux.o: in function `ice_dpll_update_state':
ice_dpll.c:(.text+0x894494): undefined reference to `ice_get_cgu_state'
ld: vmlinux.o: in function `ice_dpll_init':
(.text+0x8953d5): undefined reference to `ice_get_cgu_rclk_pin_info'
The first commit broke things by calling functions in
ice_init_feature_support that are compiled as part of ice_ptp_hw.o,
including:
* ice_is_phy_rclk_present
* ice_is_clock_mux_present_e810t
* ice_is_cgU_present
The second commit continued the break by calling several CGU functions
defined in ice_ptp_hw.c in the DPLL code.
Because the ice_dpll.c file is compiled unconditionally, it will not
link when CONFIG_PTP_1588_CLOCK=n.
It might be possible to break this dependency and expose those functions
without CONFIG_PTP_1588_CLOCK, but that is not clear to me.
For the DPLL case, simply compile ice_dpll.o only when we have
CONFIG_PTP_1588_CLOCK. Add stub no-op implementation of ice_dpll_init() and
ice_dpll_uninit() when CONFIG_PTP_1588_CLOCK=n into ice_dpll.h
The other functions are part of checking the netlist to see if hardware
features are enabled. These checks don't really belong in ice_ptp_hw.c, and
make more sense as part of the ice_common.c file. We already have
ice_is_gps_in_netlist() in ice_common.c which is doing a similar check.
Move the functions into ice_common.c and rename them to have the similar
postfix of "in_netlist()" to be more expressive of what they are actually
checking.
This also makes the ice_find_netlist_node only called from within
ice_common.c, so its safe to mark it static and stop declaring it in the
ice_common.h header as well.
Fixes: 8a3a565ff2 ("ice: add admin commands to access cgu configuration")
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309191214.TaYEct4H-lkp@intel.com
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20231002185132.1575271-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'top_waiter' is assigned unconditionally before first use,
so it does not need an initialization.
[ mingo: Created legible changelog. ]
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230725195047.3106-1-zeming@nfschina.com
Atm the MST encoder config computation may use an out-of-date pbn_div
value, if the sink is unplugged and a sink is replugged with different
link rate/lane count capabilities. The current way of reinitializing
pbn_div depends on pbn_div getting cleared via intel_atomic_check() ->
drm_dp_mst_atomic_check() ->
drm_dp_mst_atomic_check_payload_alloc_limits(), however the clearing
won't happen if the sink got unplugged (and hence
drm_dp_mst_topology_mgr::mst_state being false).
To fix the above, simply update pbn_div unconditionally during config
computation, making pbn_div always match the link rate and lane count.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929154929.343947-1-imre.deak@intel.com
This function is gone since:
53b46303da (rcu: Remove rsp parameter from rcu_boot_init_percpu_data() and friends)
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
rcu_report_dead() has to be called locally by the CPU that is going to
exit the RCU state machine. Passing a cpu argument here is error-prone
and leaves the possibility for a racy remote call.
Use local access instead.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
rcu_report_dead() is the last RCU word from the CPU down through the
hotplug path. It is called in the idle loop right before the CPU shuts
down for good. Because it removes the CPU from the grace period state
machine and reports an ultimate quiescent state if necessary, no further
use of RCU is allowed. Therefore it is expected that IRQs are disabled
upon calling this function and are not to be re-enabled again until the
CPU shuts down.
Remove the IRQs disablement from that function and verify instead that
it is actually called with IRQs disabled as it is expected at that
special point in the idle path.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This is to eliminate all cases of "*ERROR* LSPCON mode hasn't settled",
followed by link training errors. Intel engineers recommended increasing
this timeout and that does resolve the issue.
On some CometLake-based device designs the Parade PS175 takes more than
400ms to settle in PCON mode. 100 reboot trials on one device resulted
in a median settle time of 440ms and a maximum of 444ms. Even after
increasing the timeout to 500ms, 2% of devices still had this error. So
this increases the timeout to 800ms.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9443
Signed-off-by: Pablo Ceballos <pceballos@google.com>
Signed-off-by: Niko Tsirakis <ntsirakis@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002204709.761089-1-ntsirakis@google.com
This makes the code more readable.
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Arm® Functional Fixed Hardware Specification defines LPI states,
which provide an architectural context loss flags field that can
be used to describe the context that might be lost when an LPI
state is entered.
- Core context Lost
- General purpose registers.
- Floating point and SIMD registers.
- System registers, include the System register based
- generic timer for the core.
- Debug register in the core power domain.
- PMU registers in the core power domain.
- Trace register in the core power domain.
- Trace context loss
- GICR
- GICD
Qualcomm's custom CPUs preserves the architectural state,
including keeping the power domain for local timers active.
when core is power gated, the local timers are sufficient to
wake the core up without needing broadcast timer.
The patch fixes the evaluation of cpuidle arch_flags, and moves only to
broadcast timer if core context lost is defined in ACPI LPI.
Fixes: a36a7fecfe ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com>
Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.
Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://lore.kernel.org/all/F903A825-F05F-4B77-A2B5-7356282FBA2C@apple.com/
Cc: <stable@vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZRqk1wAKCRDbK58LschI
g8GRAQC4E0bw6BTFRl0b3MxvpZES6lU0BUtX2gKVK4tLZdXw/wEAmTlBXQqNzF3b
BkCQknVbFTSw/8l8pzUW123Fb46wUAQ=
=E3hd
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
